arm64: dts: actions: s700: Add I2C controller nodes

Add I2C controller nodes for Actions Semiconductor S700 SoC.

Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index e54a6e7..ea12160 100644 (file)
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -176,6 +176,46 @@
                        #reset-cells = <1>;
                };
 
+               i2c0: i2c@e0170000 {
+                       compatible = "actions,s700-i2c";
+                       reg = <0 0xe0170000 0 0x1000>;
+                       clocks = <&cmu CLK_I2C0>;
+                       interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
+               i2c1: i2c@e0174000 {
+                       compatible = "actions,s700-i2c";
+                       reg = <0 0xe0174000 0 0x1000>;
+                       clocks = <&cmu CLK_I2C1>;
+                       interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
+               i2c2: i2c@e0178000 {
+                       compatible = "actions,s700-i2c";
+                       reg = <0 0xe0178000 0 0x1000>;
+                       clocks = <&cmu CLK_I2C2>;
+                       interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
+               i2c3: i2c@e017c000 {
+                       compatible = "actions,s700-i2c";
+                       reg = <0 0xe017c000 0 0x1000>;
+                       clocks = <&cmu CLK_I2C3>;
+                       interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
                sps: power-controller@e01b0100 {
                        compatible = "actions,s700-sps";
                        reg = <0x0 0xe01b0100 0x0 0x100>;