Input: Allow compile test of GPIO consumers if !GPIOLIB

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 4cd94fd..10dfa23 100644 (file)
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -187,7 +187,7 @@ config KEYBOARD_EP93XX
 
 config KEYBOARD_GPIO
        tristate "GPIO Buttons"
-       depends on GPIOLIB
+       depends on GPIOLIB || COMPILE_TEST
        help
          This driver implements support for buttons connected
          to GPIO pins of various CPUs (and some other chips).
@@ -253,7 +253,7 @@ config KEYBOARD_TCA8418
 
 config KEYBOARD_MATRIX
        tristate "GPIO driven matrix keypad support"
-       depends on GPIOLIB
+       depends on GPIOLIB || COMPILE_TEST
        select INPUT_MATRIXKMAP
        help
          Enable support for GPIO driven matrix keypad.

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index d4f0a81..dade381 100644 (file)
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -259,7 +259,7 @@ config INPUT_APANEL
 config INPUT_GP2A
        tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
        depends on I2C
-       depends on GPIOLIB
+       depends on GPIOLIB || COMPILE_TEST
        help
          Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
          hooked to an I2C bus.
@@ -269,7 +269,7 @@ config INPUT_GP2A
 
 config INPUT_GPIO_BEEPER
        tristate "Generic GPIO Beeper support"
-       depends on GPIOLIB
+       depends on GPIOLIB || COMPILE_TEST
        help
          Say Y here if you have a beeper connected to a GPIO pin.
 
@@ -278,7 +278,7 @@ config INPUT_GPIO_BEEPER
 
 config INPUT_GPIO_TILT_POLLED
        tristate "Polled GPIO tilt switch"
-       depends on GPIOLIB
+       depends on GPIOLIB || COMPILE_TEST
        select INPUT_POLLDEV
        help
          This driver implements support for tilt switches connected
@@ -569,7 +569,7 @@ config INPUT_PWM_BEEPER
 
 config INPUT_GPIO_ROTARY_ENCODER
        tristate "Rotary encoders connected to GPIO pins"
-       depends on GPIOLIB
+       depends on GPIOLIB || COMPILE_TEST
        help
          Say Y here to add support for rotary encoders connected to GPIO lines.
          Check file:Documentation/input/rotary-encoder.txt for more
@@ -776,7 +776,8 @@ config INPUT_SOC_BUTTON_ARRAY
 
 config INPUT_DRV260X_HAPTICS
        tristate "TI DRV260X haptics support"
-       depends on INPUT && I2C && GPIOLIB
+       depends on INPUT && I2C
+       depends on GPIOLIB || COMPILE_TEST
        select INPUT_FF_MEMLESS
        select REGMAP_I2C
        help

diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index d7820d1..17f97e5 100644 (file)
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -341,7 +341,7 @@ config MOUSE_VSXXXAA
 
 config MOUSE_GPIO
        tristate "GPIO mouse"
-       depends on GPIOLIB
+       depends on GPIOLIB || COMPILE_TEST
        select INPUT_POLLDEV
        help
          This driver simulates a mouse on GPIO lines of various CPUs (and some

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 860d426..059edeb 100644 (file)
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -118,7 +118,7 @@ config TOUCHSCREEN_ATMEL_MXT
 config TOUCHSCREEN_AUO_PIXCIR
        tristate "AUO in-cell touchscreen using Pixcir ICs"
        depends on I2C
-       depends on GPIOLIB
+       depends on GPIOLIB || COMPILE_TEST
        help
          Say Y here if you have a AUO display with in-cell touchscreen
          using Pixcir ICs.
@@ -142,7 +142,7 @@ config TOUCHSCREEN_BU21013
 
 config TOUCHSCREEN_CHIPONE_ICN8318
        tristate "chipone icn8318 touchscreen controller"
-       depends on GPIOLIB
+       depends on GPIOLIB || COMPILE_TEST
        depends on I2C
        depends on OF
        help
@@ -156,7 +156,7 @@ config TOUCHSCREEN_CHIPONE_ICN8318
 config TOUCHSCREEN_CY8CTMG110
        tristate "cy8ctmg110 touchscreen"
        depends on I2C
-       depends on GPIOLIB
+       depends on GPIOLIB || COMPILE_TEST
        help
          Say Y here if you have a cy8ctmg110 capacitive touchscreen on
          an AAVA device.
@@ -1030,7 +1030,7 @@ config TOUCHSCREEN_TPS6507X
 config TOUCHSCREEN_ZFORCE
        tristate "Neonode zForce infrared touchscreens"
        depends on I2C
-       depends on GPIOLIB
+       depends on GPIOLIB || COMPILE_TEST
        help
          Say Y here if you have a touchscreen using the zforce
          infraread technology from Neonode.