netsec: restore phy power state after controller reset

Since commit 8e850f25b581 ("net: socionext: Stop PHY before resetting
netsec") netsec_netdev_init() power downs phy before resetting the
controller. However, the state is not restored once the reset is
complete. As a result it is not possible to bring up network on a
platform with Broadcom BCM5482 phy.

Fix the issue by restoring phy power state after controller reset is
complete.

Fixes: 8e850f25b581 ("net: socionext: Stop PHY before resetting netsec")
Cc: stable@vger.kernel.org
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
index 3c53051..200785e 100644 (file)
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -1715,14 +1715,17 @@ static int netsec_netdev_init(struct net_device *ndev)
                goto err1;
 
        /* set phy power down */
-       data = netsec_phy_read(priv->mii_bus, priv->phy_addr, MII_BMCR) |
-               BMCR_PDOWN;
-       netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, data);
+       data = netsec_phy_read(priv->mii_bus, priv->phy_addr, MII_BMCR);
+       netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR,
+                        data | BMCR_PDOWN);
 
        ret = netsec_reset_hardware(priv, true);
        if (ret)
                goto err2;
 
+       /* Restore phy power state */
+       netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, data);
+
        spin_lock_init(&priv->desc_ring[NETSEC_RING_TX].lock);
        spin_lock_init(&priv->desc_ring[NETSEC_RING_RX].lock);