--- /dev/null
+/*
+ * Copyright (C) 2014 Capella Microsystems Inc.
+ * Author: Kevin Tsai <ktsai@capellamicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2, as published
+ * by the Free Software Foundation.
+ *
+ * Special thanks Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
+ * help to add ACPI support.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/regulator/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/init.h>
+
+#ifdef CONFIG_ACPI
+#include <linux/acpi.h>
+#endif /* CONFIG_ACPI */
+
+/* Registers Address */
+#define CM3218X_REG_ADDR_CMD 0x00
+#define CM3218X_REG_ADDR_WH 0x01
+#define CM3218X_REG_ADDR_WL 0x02
+#define CM3218X_REG_ADDR_TEST 0x03
+#define CM3218X_REG_ADDR_ALS 0x04
+#define CM3218X_REG_ADDR_STATUS 0x06
+#define CM3218X_REG_ADDR_ID 0x07
+
+/* Number of Configurable Registers */
+#define CM3218X_CONF_REG_NUM 16
+
+/* CMD register */
+#define CM3218X_CMD_ALS_DISABLE BIT(0)
+#define CM3218X_CMD_ALS_INT_EN BIT(1)
+#define CM3218X_CMD_ALS_THRES_WINDOW BIT(2)
+
+#define CM3218X_CMD_ALS_PERS_SHIFT 4
+#define CM3218X_CMD_ALS_PERS_MASK (0x03 << CM3218X_CMD_ALS_PERS_SHIFT)
+#define CM3218X_CMD_ALS_PERS_DEFAULT (0x01 << CM3218X_CMD_ALS_PERS_SHIFT)
+
+#define CM3218X_CMD_ALS_IT_SHIFT 6
+#define CM3218X_CMD_ALS_IT_MASK (0x0F << CM3218X_CMD_ALS_IT_SHIFT)
+#define CM3218X_CMD_ALS_IT_DEFAULT (0x01 << CM3218X_CMD_ALS_IT_SHIFT)
+
+#define CM3218X_CMD_ALS_HS_SHIFT 11
+#define CM3218X_CMD_ALS_HS_MASK (0x01 << CM3218X_CMD_ALS_HS_SHIFT)
+#define CM3218X_CMD_ALS_HS_DEFAULT (0x00 << CM3218X_CMD_ALS_HS_SHIFT)
+
+#define CM3218X_CMD_DEFAULT (CM3218X_CMD_ALS_THRES_WINDOW |\
+ CM3218X_CMD_ALS_PERS_DEFAULT |\
+ CM3218X_CMD_ALS_IT_DEFAULT |\
+ CM3218X_CMD_ALS_HS_DEFAULT)
+
+#define CM3218X_WH_DEFAULT 0xFFFF
+#define CM3218X_WL_DEFAULT 0x0000
+
+#define CM3218X_CALIBSCALE_DEFAULT 100000
+#define CM3218X_CALIBSCALE_RESOLUTION 100000
+#define CM3218X_MLUX_PER_LUX 1000
+#define CM3218X_THRESHOLD_PERCENT 10 /* 10 percent */
+
+#define CM3218X_ARA 0x0C
+
+/* CM3218X family */
+enum {
+ cm3218,
+ cm32181,
+ cm32182
+};
+
+/* CM3218 Family */
+#define CM3218_MLUX_PER_BIT_DEFAULT 5 /* Depend on system */
+#define CM3218_MLUX_PER_BIT_BASE_IT 800000
+static const int CM3218_als_it_bits[] = {0, 1, 2, 3};
+static const int CM3218_als_it_values[] = {100000, 200000, 400000, 800000};
+
+/* CM32181 Family */
+#define CM32181_MLUX_PER_BIT_DEFAULT 5
+#define CM32181_MLUX_PER_BIT_BASE_IT 800000
+static const int CM32181_als_it_bits[] = {12, 8, 0, 1, 2, 3};
+static const int CM32181_als_it_values[] = {
+ 25000, 50000, 100000, 200000, 400000, 800000};
+
+struct cm3218x_als_info {
+ u32 id;
+ int int_type;
+#define CM3218X_INT_TYPE_SMBUS 0
+#define CM3218X_INT_TYPE_I2C 1
+ int regs_bmp;
+ int calibscale;
+ int mlux_per_bit;
+ int mlux_per_bit_base_it;
+ const int *als_it_bits;
+ const int *als_it_values;
+ const int num_als_it;
+ int als_raw;
+};
+
+static struct cm3218x_als_info cm3218_info = {
+ .id = 3218,
+ .int_type = CM3218X_INT_TYPE_SMBUS,
+ .regs_bmp = 0x0F,
+ .calibscale = CM3218X_CALIBSCALE_DEFAULT,
+ .mlux_per_bit = CM3218_MLUX_PER_BIT_DEFAULT,
+ .mlux_per_bit_base_it = CM3218_MLUX_PER_BIT_BASE_IT,
+ .als_it_bits = CM3218_als_it_bits,
+ .als_it_values = CM3218_als_it_values,
+ .num_als_it = ARRAY_SIZE(CM3218_als_it_bits),
+};
+
+static struct cm3218x_als_info cm32181_info = {
+ .id = 32181,
+ .int_type = CM3218X_INT_TYPE_I2C,
+ .regs_bmp = 0x0F,
+ .calibscale = CM3218X_CALIBSCALE_DEFAULT,
+ .mlux_per_bit = CM32181_MLUX_PER_BIT_DEFAULT,
+ .mlux_per_bit_base_it = CM32181_MLUX_PER_BIT_BASE_IT,
+ .als_it_bits = CM32181_als_it_bits,
+ .als_it_values = CM32181_als_it_values,
+ .num_als_it = ARRAY_SIZE(CM32181_als_it_bits),
+};
+
+static struct cm3218x_als_info cm32182_info = {
+ .id = 32182,
+ .int_type = CM3218X_INT_TYPE_I2C,
+ .regs_bmp = 0x0F,
+ .calibscale = CM3218X_CALIBSCALE_DEFAULT,
+ .mlux_per_bit = CM32181_MLUX_PER_BIT_DEFAULT,
+ .mlux_per_bit_base_it = CM32181_MLUX_PER_BIT_BASE_IT,
+ .als_it_bits = CM32181_als_it_bits,
+ .als_it_values = CM32181_als_it_values,
+ .num_als_it = ARRAY_SIZE(CM32181_als_it_bits),
+};
+
+struct cm3218x_chip {
+ struct i2c_client *client;
+ struct mutex lock;
+ u16 conf_regs[CM3218X_CONF_REG_NUM];
+ struct cm3218x_als_info *als_info;
+};
+
+static int cm3218x_get_lux(struct cm3218x_chip *chip);
+static int cm3218x_threshold_update(struct cm3218x_chip *chip, int percent);
+static int cm3218x_read_als_it(struct cm3218x_chip *chip, int *val2);
+
+/**
+ * cm3218x_read_ara() - Read ARA register
+ * @chip: pointer of struct cm3218x.
+ *
+ * Read SMBus ARA register.
+ *
+ * Return: -ENODEV for failed. Otherwise return the register value.
+ */
+static int cm3218x_read_ara(struct cm3218x_chip *chip)
+{
+ unsigned char rxdata;
+ struct i2c_msg msgs[] = {
+ {
+ .addr = CM3218X_ARA,
+ .flags = I2C_M_RD,
+ .len = 1,
+ .buf = &rxdata,
+ },
+ };
+
+ if (i2c_transfer(chip->client->adapter, msgs, 1) < 0)
+ return -ENODEV;
+ return rxdata;
+}
+
+/**
+ * cm3218x_interrupt_config() - Enable/Disable CM3218X interrupt
+ * @chip: pointer of struct cm3218x.
+ * @enable: 0 to disable; otherwise to enable
+ *
+ * Config CM3218X interrupt control bit.
+ *
+ * Return: 0 for success; otherwise for error code.
+ */
+static int cm3218x_interrupt_config(struct cm3218x_chip *chip, int enable)
+{
+ struct i2c_client *client = chip->client;
+ struct cm3218x_als_info *als_info = chip->als_info;
+ int status;
+
+ if (!als_info)
+ return -ENODEV;
+
+ /* Force to clean interrupt */
+ if (als_info->int_type == CM3218X_INT_TYPE_I2C) {
+ status = i2c_smbus_read_word_data(client,
+ CM3218X_REG_ADDR_STATUS);
+ if (status < 0)
+ als_info->int_type = CM3218X_INT_TYPE_SMBUS;
+ }
+ if (als_info->int_type == CM3218X_INT_TYPE_SMBUS)
+ cm3218x_read_ara(chip);
+
+ if (enable)
+ chip->conf_regs[CM3218X_REG_ADDR_CMD] |=
+ CM3218X_CMD_ALS_INT_EN;
+ else
+ chip->conf_regs[CM3218X_REG_ADDR_CMD] &=
+ ~CM3218X_CMD_ALS_INT_EN;
+
+ status = i2c_smbus_write_word_data(client, CM3218X_REG_ADDR_CMD,
+ chip->conf_regs[CM3218X_REG_ADDR_CMD]);
+
+ if (status < 0)
+ return -ENODEV;
+
+ return status;
+}
+
+#ifdef CONFIG_ACPI
+/**
+ * cm3218x_acpi_get_cpm_info() - Get CPM object from ACPI
+ * @client pointer of struct i2c_client.
+ * @obj_name pointer of ACPI object name.
+ * @count maximum size of return array.
+ * @vals pointer of array for return elements.
+ *
+ * Convert ACPI CPM table to array. Special thanks Srinivas Pandruvada's
+ * help to implement this routine.
+ *
+ * Return: -ENODEV for fail. Otherwise is number of elements.
+ */
+static int cm3218x_acpi_get_cpm_info(struct i2c_client *client, char *obj_name,
+ int count, u64 *vals)
+{
+ acpi_handle handle;
+ struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+ int i;
+ acpi_status status;
+ union acpi_object *cpm;
+
+ handle = ACPI_HANDLE(&client->dev);
+ if (!handle)
+ return -ENODEV;
+
+ status = acpi_evaluate_object(handle, obj_name, NULL, &buffer);
+ if (ACPI_FAILURE(status)) {
+ dev_err(&client->dev, "object %s not found\n", obj_name);
+ return -ENODEV;
+ }
+
+ cpm = buffer.pointer;
+ for (i = 0; i < cpm->package.count && i < count; ++i) {
+ union acpi_object *elem;
+ elem = &(cpm->package.elements[i]);
+ vals[i] = elem->integer.value;
+ }
+
+ kfree(buffer.pointer);
+
+ return cpm->package.count;
+}
+#endif /* CONFIG_ACPI */
+
+/**
+ * cm3218x_reg_init() - Initialize CM3218X registers
+ * @chip: pointer of struct cm3218x.
+ *
+ * Initialize CM3218X ambient light sensor register to default values.
+ *
+ Return: 0 for success; otherwise for error code.
+ */
+static int cm3218x_reg_init(struct cm3218x_chip *chip)
+{
+ struct i2c_client *client = chip->client;
+ int i;
+ s32 ret;
+ struct cm3218x_als_info *als_info;
+#ifdef CONFIG_ACPI
+ int cpm_elem_count;
+ u64 cpm_elems[20];
+#endif /* CONFIG_ACPI */
+
+ /* Default device */
+ chip->als_info = &cm3218_info;
+ chip->conf_regs[CM3218X_REG_ADDR_CMD] = CM3218X_CMD_DEFAULT;
+ chip->conf_regs[CM3218X_REG_ADDR_WH] = CM3218X_WH_DEFAULT;
+ chip->conf_regs[CM3218X_REG_ADDR_WL] = CM3218X_WL_DEFAULT;
+
+ /* Disable interrupt */
+ cm3218x_interrupt_config(chip, 0);
+
+ /* Disable Test Mode */
+ i2c_smbus_write_word_data(client, CM3218X_REG_ADDR_TEST, 0x0000);
+
+ /* Disable device */
+ i2c_smbus_write_word_data(client, CM3218X_REG_ADDR_CMD,
+ CM3218X_CMD_ALS_DISABLE);
+
+ /* Identify device */
+ ret = i2c_smbus_read_word_data(client, CM3218X_REG_ADDR_ID);
+ if (ret < 0)
+ return ret;
+ switch (ret & 0xFF) {
+ case 0x18:
+ als_info = chip->als_info = &cm3218_info;
+ if (ret & 0x0800)
+ als_info->int_type = CM3218X_INT_TYPE_I2C;
+ else
+ als_info->int_type = CM3218X_INT_TYPE_SMBUS;
+ break;
+ case 0x81:
+ als_info = chip->als_info = &cm32181_info;
+ break;
+ case 0x82:
+ als_info = chip->als_info = &cm32182_info;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+#ifdef CONFIG_ACPI
+ if (ACPI_HANDLE(&client->dev)) {
+ /* Load from ACPI */
+ cpm_elem_count = cm3218x_acpi_get_cpm_info(client, "CPM0",
+ ARRAY_SIZE(cpm_elems),
+ cpm_elems);
+ if (cpm_elem_count > 0) {
+ int header_num = 3;
+ int reg_num = cpm_elem_count - header_num;
+
+ als_info->id = cpm_elems[0];
+ als_info->regs_bmp = cpm_elems[2];
+ for (i = 0; i < reg_num; i++)
+ if (als_info->regs_bmp & (1<<i))
+ chip->conf_regs[i] =
+ cpm_elems[header_num+i];
+ }
+
+ cpm_elem_count = cm3218x_acpi_get_cpm_info(client, "CPM1",
+ ARRAY_SIZE(cpm_elems),
+ cpm_elems);
+ if (cpm_elem_count > 0) {
+ als_info->mlux_per_bit = (int)cpm_elems[0] / 100;
+ als_info->calibscale = (int)cpm_elems[1];
+ }
+ }
+#endif /* CONFIG_ACPI */
+
+ /* Force to disable interrupt */
+ chip->conf_regs[CM3218X_REG_ADDR_CMD] &= ~CM3218X_CMD_ALS_INT_EN;
+
+ /* Initialize registers */
+ for (i = 0; i < CM3218X_CONF_REG_NUM; i++) {
+ if (als_info->regs_bmp & (1<<i)) {
+ ret = i2c_smbus_write_word_data(client, i,
+ chip->conf_regs[i]);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * cm3218x_read_als_it() - Get sensor integration time (ms)
+ * @chip: pointer of struct cm3218x
+ * @val2: pointer of int to load the als_it value.
+ *
+ * Report the current integration time in milliseconds.
+ *
+ * Return: IIO_VAL_INT_PLUS_MICRO for success, otherwise -EINVAL.
+ */
+static int cm3218x_read_als_it(struct cm3218x_chip *chip, int *val2)
+{
+ struct cm3218x_als_info *als_info = chip->als_info;
+ u16 als_it;
+ int i;
+
+ als_it = chip->conf_regs[CM3218X_REG_ADDR_CMD];
+ als_it &= CM3218X_CMD_ALS_IT_MASK;
+ als_it >>= CM3218X_CMD_ALS_IT_SHIFT;
+ for (i = 0; i < als_info->num_als_it; i++) {
+ if (als_it == als_info->als_it_bits[i]) {
+ *val2 = als_info->als_it_values[i];
+ return IIO_VAL_INT_PLUS_MICRO;
+ }
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * cm3218x_write_als_it() - Write sensor integration time
+ * @chip: pointer of struct cm3218x.
+ * @val: integration time in milliseconds.
+ *
+ * Convert integration time (ms) to sensor value.
+ *
+ * Return: i2c_smbus_write_word_data command return value.
+ */
+static int cm3218x_write_als_it(struct cm3218x_chip *chip, int val)
+{
+ struct i2c_client *client = chip->client;
+ struct cm3218x_als_info *als_info = chip->als_info;
+ u16 als_it;
+ int ret, i;
+
+ for (i = 0; i < als_info->num_als_it; i++)
+ if (val <= als_info->als_it_values[i])
+ break;
+ if (i >= als_info->num_als_it)
+ i = als_info->num_als_it - 1;
+
+ als_it = als_info->als_it_bits[i];
+ als_it <<= CM3218X_CMD_ALS_IT_SHIFT;
+
+ mutex_lock(&chip->lock);
+ chip->conf_regs[CM3218X_REG_ADDR_CMD] &=
+ ~CM3218X_CMD_ALS_IT_MASK;
+ chip->conf_regs[CM3218X_REG_ADDR_CMD] |=
+ als_it;
+ ret = i2c_smbus_write_word_data(client, CM3218X_REG_ADDR_CMD,
+ chip->conf_regs[CM3218X_REG_ADDR_CMD]);
+ mutex_unlock(&chip->lock);
+
+ return ret;
+}
+
+/**
+ * cm3218x_get_lux() - report current lux value
+ * @chip: pointer of struct cm3218x.
+ *
+ * Convert sensor raw data to lux. It depends on integration
+ * time and calibscale variable.
+ *
+ * Return: Positive value is lux, otherwise is error code.
+ */
+static int cm3218x_get_lux(struct cm3218x_chip *chip)
+{
+ struct i2c_client *client = chip->client;
+ struct cm3218x_als_info *als_info = chip->als_info;
+ int ret;
+ int als_it;
+ u64 tmp;
+
+ /* Calculate mlux per bit based on als_it */
+ ret = cm3218x_read_als_it(chip, &als_it);
+ if (ret < 0)
+ return -EINVAL;
+ tmp = (__force u64)als_info->mlux_per_bit;
+ tmp *= als_info->mlux_per_bit_base_it;
+ tmp = div_u64(tmp, als_it);
+
+ /* Get als_raw */
+ if (!(chip->conf_regs[CM3218X_REG_ADDR_CMD] & CM3218X_CMD_ALS_INT_EN))
+ als_info->als_raw = i2c_smbus_read_word_data(
+ client,
+ CM3218X_REG_ADDR_ALS);
+ if (als_info->als_raw < 0)
+ return als_info->als_raw;
+
+ tmp *= als_info->als_raw;
+ tmp *= als_info->calibscale;
+ tmp = div_u64(tmp, CM3218X_CALIBSCALE_RESOLUTION);
+ tmp = div_u64(tmp, CM3218X_MLUX_PER_LUX);
+
+ if (tmp > 0xFFFF)
+ tmp = 0xFFFF;
+
+ return (int)tmp;
+}
+
+static int cm3218x_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct cm3218x_chip *chip = iio_priv(indio_dev);
+ struct cm3218x_als_info *als_info = chip->als_info;
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_PROCESSED:
+ ret = cm3218x_get_lux(chip);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_CALIBSCALE:
+ *val = als_info->calibscale;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_INT_TIME:
+ *val = 0;
+ ret = cm3218x_read_als_it(chip, val2);
+ return ret;
+ }
+
+ return -EINVAL;
+}
+
+static int cm3218x_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct cm3218x_chip *chip = iio_priv(indio_dev);
+ struct cm3218x_als_info *als_info = chip->als_info;
+ long ms;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_CALIBSCALE:
+ als_info->calibscale = val;
+ return val;
+ case IIO_CHAN_INFO_INT_TIME:
+ ms = val * 1000000 + val2;
+ return cm3218x_write_als_it(chip, (int)ms);
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * cm3218x_get_it_available() - Get available ALS IT value
+ * @dev: pointer of struct device.
+ * @attr: pointer of struct device_attribute.
+ * @buf: pointer of return string buffer.
+ *
+ * Display the available integration time in milliseconds.
+ *
+ * Return: string length.
+ */
+static ssize_t cm3218x_get_it_available(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct cm3218x_chip *chip = iio_priv(dev_to_iio_dev(dev));
+ struct cm3218x_als_info *als_info = chip->als_info;
+ int i, len;
+
+ for (i = 0, len = 0; i < als_info->num_als_it; i++)
+ len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ",
+ als_info->als_it_values[i]/1000000,
+ als_info->als_it_values[i]%1000000);
+ return len + scnprintf(buf + len, PAGE_SIZE - len, "\n");
+}
+
+/**
+ * cm3218x_threshold_update() - Update the threshold registers.
+ * @chip: pointer of struct cm3218x_chip.
+ * @percent: +/- percent.
+ *
+ * Based on the current ALS value, update the hi and low threshold registers.
+ *
+ * Return: 0 for success; otherwise for error code.
+ */
+static int cm3218x_threshold_update(struct cm3218x_chip *chip, int percent)
+{
+ struct i2c_client *client = chip->client;
+ struct cm3218x_als_info *als_info = chip->als_info;
+ int ret;
+ int wh, wl;
+
+ ret = als_info->als_raw = i2c_smbus_read_word_data(client,
+ CM3218X_REG_ADDR_ALS);
+ if (ret < 0)
+ return ret;
+
+ wh = wl = ret;
+ ret *= percent;
+ ret /= 100;
+ if (ret < 1)
+ ret = 1;
+ wh += ret;
+ wl -= ret;
+ if (wh > 65535)
+ wh = 65535;
+ if (wl < 0)
+ wl = 0;
+
+ chip->conf_regs[CM3218X_REG_ADDR_WH] = wh;
+ ret = i2c_smbus_write_word_data(
+ client,
+ CM3218X_REG_ADDR_WH,
+ chip->conf_regs[CM3218X_REG_ADDR_WH]);
+ if (ret < 0)
+ return ret;
+
+ chip->conf_regs[CM3218X_REG_ADDR_WL] = wl;
+ ret = i2c_smbus_write_word_data(
+ client,
+ CM3218X_REG_ADDR_WL,
+ chip->conf_regs[CM3218X_REG_ADDR_WL]);
+
+ return ret;
+}
+
+/**
+ * cm3218x_event_handler() - Interrupt handling routine.
+ * @irq: irq number.
+ * @private: pointer of void.
+ *
+ * Clean interrupt and reset threshold registers.
+ *
+ * Return: IRQ_HANDLED.
+ */
+static irqreturn_t cm3218x_event_handler(int irq, void *private)
+{
+ struct iio_dev *dev_info = private;
+ struct cm3218x_chip *chip = iio_priv(dev_info);
+ int ret;
+
+ mutex_lock(&chip->lock);
+
+ /* Disable interrupt */
+ ret = cm3218x_interrupt_config(chip, 0);
+ if (ret < 0)
+ goto error_handler_unlock;
+
+ /* Update Hi/Lo windows */
+ ret = cm3218x_threshold_update(chip, CM3218X_THRESHOLD_PERCENT);
+ if (ret < 0)
+ goto error_handler_unlock;
+
+ /* Enable interrupt */
+ cm3218x_interrupt_config(chip, 1);
+
+error_handler_unlock:
+ mutex_unlock(&chip->lock);
+ return IRQ_HANDLED;
+}
+
+static const struct iio_chan_spec cm3218x_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_CALIBSCALE) |
+ BIT(IIO_CHAN_INFO_INT_TIME),
+ }
+};
+
+static IIO_DEVICE_ATTR(in_illuminance_integration_time_available,
+ S_IRUGO, cm3218x_get_it_available, NULL, 0);
+
+static struct attribute *cm3218x_attributes[] = {
+ &iio_dev_attr_in_illuminance_integration_time_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group cm3218x_attribute_group = {
+ .attrs = cm3218x_attributes
+};
+
+static const struct iio_info cm3218x_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = &cm3218x_read_raw,
+ .write_raw = &cm3218x_write_raw,
+ .attrs = &cm3218x_attribute_group,
+};
+
+static int cm3218x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct cm3218x_chip *chip;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ /* smbus magic? */
+ if (client->addr == 0x0c)
+ client->addr = 0x48;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
+ if (!indio_dev) {
+ dev_err(&client->dev, "devm_iio_device_alloc failed\n");
+ return -ENOMEM;
+ }
+
+ chip = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ chip->client = client;
+
+ mutex_init(&chip->lock);
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->channels = cm3218x_channels;
+ indio_dev->num_channels = ARRAY_SIZE(cm3218x_channels);
+ indio_dev->info = &cm3218x_info;
+ if (id && id->name)
+ indio_dev->name = id->name;
+ else
+ indio_dev->name = (char *)dev_name(&client->dev);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = cm3218x_reg_init(chip);
+ if (ret) {
+ dev_err(&client->dev,
+ "%s: register init failed\n",
+ __func__);
+ return ret;
+ }
+
+ if (client->irq) {
+ ret = request_threaded_irq(client->irq,
+ NULL,
+ cm3218x_event_handler,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "cm3218x_event",
+ indio_dev);
+
+ if (ret < 0) {
+ dev_err(&client->dev, "irq request error %d\n",
+ -ret);
+ goto error_disable_int;
+ }
+ }
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "%s: regist device failed\n",
+ __func__);
+ goto error_free_irq;
+ }
+
+ if (client->irq) {
+ ret = cm3218x_threshold_update(chip, CM3218X_THRESHOLD_PERCENT);
+ if (ret < 0)
+ goto error_free_irq;
+
+ ret = cm3218x_interrupt_config(chip, 1);
+ if (ret < 0)
+ goto error_free_irq;
+ }
+
+ return 0;
+
+error_free_irq:
+ if (client->irq)
+ free_irq(client->irq, indio_dev);
+error_disable_int:
+ cm3218x_interrupt_config(chip, 0);
+ return ret;
+}
+
+static int cm3218x_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct cm3218x_chip *chip = iio_priv(indio_dev);
+
+ cm3218x_interrupt_config(chip, 0);
+ if (client->irq)
+ free_irq(client->irq, indio_dev);
+ iio_device_unregister(indio_dev);
+ return 0;
+}
+
+static const struct i2c_device_id cm3218x_id[] = {
+ { "cm3218", cm3218},
+ { "cm32181", cm32181},
+ { "cm32182", cm32182},
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, cm3218x_id);
+
+static const struct of_device_id cm3218x_of_match[] = {
+ { .compatible = "capella,cm3218" },
+ { }
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id cm3218x_acpi_match[] = {
+ { "CPLM3218", 0},
+ {},
+};
+
+MODULE_DEVICE_TABLE(acpi, cm3218x_acpi_match);
+#endif /* CONFIG_ACPI */
+
+static struct i2c_driver cm3218x_driver = {
+ .driver = {
+ .name = "cm3218x",
+#ifdef CONFIG_ACPI
+ .acpi_match_table = ACPI_PTR(cm3218x_acpi_match),
+#endif /* CONFIG_ACPI */
+ .of_match_table = of_match_ptr(cm3218x_of_match),
+ .owner = THIS_MODULE,
+ },
+ .id_table = cm3218x_id,
+ .probe = cm3218x_probe,
+ .remove = cm3218x_remove,
+};
+
+module_i2c_driver(cm3218x_driver);
+
+MODULE_AUTHOR("Kevin Tsai <ktsai@capellamicro.com>");
+MODULE_DESCRIPTION("CM3218X ambient light sensor driver");
+MODULE_LICENSE("GPL");