hwmon: (lm83) Replace new_client with client

It has no value to name a variable 'new_client' in probe and detect
functions; it is obvious that the client is new. Use 'client' as
variable name instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index 2bb4bce..fdd89cc 100644 (file)
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -272,10 +272,10 @@ static const struct attribute_group lm83_group_opt = {
  */
 
 /* Return 0 if detection is successful, -ENODEV otherwise */
-static int lm83_detect(struct i2c_client *new_client,
+static int lm83_detect(struct i2c_client *client,
                       struct i2c_board_info *info)
 {
-       struct i2c_adapter *adapter = new_client->adapter;
+       struct i2c_adapter *adapter = client->adapter;
        const char *name;
        u8 man_id, chip_id;
 
@@ -283,20 +283,20 @@ static int lm83_detect(struct i2c_client *new_client,
                return -ENODEV;
 
        /* Detection */
-       if ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1) & 0xA8) ||
-           (i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2) & 0x48) ||
-           (i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG) & 0x41)) {
+       if ((i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS1) & 0xA8) ||
+           (i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS2) & 0x48) ||
+           (i2c_smbus_read_byte_data(client, LM83_REG_R_CONFIG) & 0x41)) {
                dev_dbg(&adapter->dev, "LM83 detection failed at 0x%02x\n",
-                       new_client->addr);
+                       client->addr);
                return -ENODEV;
        }
 
        /* Identification */
-       man_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_MAN_ID);
+       man_id = i2c_smbus_read_byte_data(client, LM83_REG_R_MAN_ID);
        if (man_id != 0x01)     /* National Semiconductor */
                return -ENODEV;
 
-       chip_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_CHIP_ID);
+       chip_id = i2c_smbus_read_byte_data(client, LM83_REG_R_CHIP_ID);
        switch (chip_id) {
        case 0x03:
                name = "lm83";
@@ -324,17 +324,17 @@ static const struct i2c_device_id lm83_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, lm83_id);
 
-static int lm83_probe(struct i2c_client *new_client)
+static int lm83_probe(struct i2c_client *client)
 {
        struct device *hwmon_dev;
        struct lm83_data *data;
 
-       data = devm_kzalloc(&new_client->dev, sizeof(struct lm83_data),
+       data = devm_kzalloc(&client->dev, sizeof(struct lm83_data),
                            GFP_KERNEL);
        if (!data)
                return -ENOMEM;
 
-       data->client = new_client;
+       data->client = client;
        mutex_init(&data->update_lock);
 
        /*
@@ -344,11 +344,11 @@ static int lm83_probe(struct i2c_client *new_client)
         * declare 1 and 3 common, and then 2 and 4 only for the LM83.
         */
        data->groups[0] = &lm83_group;
-       if (i2c_match_id(lm83_id, new_client)->driver_data == lm83)
+       if (i2c_match_id(lm83_id, client)->driver_data == lm83)
                data->groups[1] = &lm83_group_opt;
 
-       hwmon_dev = devm_hwmon_device_register_with_groups(&new_client->dev,
-                                                          new_client->name,
+       hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev,
+                                                          client->name,
                                                           data, data->groups);
        return PTR_ERR_OR_ZERO(hwmon_dev);
 }