staging: comedi: dt2814: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/dt2814.c b/drivers/staging/comedi/drivers/dt2814.c
index abad6e4..3794b7e 100644 (file)
--- a/drivers/staging/comedi/drivers/dt2814.c
+++ b/drivers/staging/comedi/drivers/dt2814.c
@@ -66,26 +66,35 @@ struct dt2814_private {
 #define DT2814_TIMEOUT 10
 #define DT2814_MAX_SPEED 100000        /* Arbitrary 10 khz limit */
 
+static int dt2814_ai_eoc(struct comedi_device *dev,
+                        struct comedi_subdevice *s,
+                        struct comedi_insn *insn,
+                        unsigned long context)
+{
+       unsigned int status;
+
+       status = inb(dev->iobase + DT2814_CSR);
+       if (status & DT2814_FINISH)
+               return 0;
+       return -EBUSY;
+}
+
 static int dt2814_ai_insn_read(struct comedi_device *dev,
                               struct comedi_subdevice *s,
                               struct comedi_insn *insn, unsigned int *data)
 {
-       int n, i, hi, lo;
+       int n, hi, lo;
        int chan;
-       int status = 0;
+       int ret;
 
        for (n = 0; n < insn->n; n++) {
                chan = CR_CHAN(insn->chanspec);
 
                outb(chan, dev->iobase + DT2814_CSR);
-               for (i = 0; i < DT2814_TIMEOUT; i++) {
-                       status = inb(dev->iobase + DT2814_CSR);
-                       udelay(10);
-                       if (status & DT2814_FINISH)
-                               break;
-               }
-               if (i >= DT2814_TIMEOUT)
-                       return -ETIMEDOUT;
+
+               ret = comedi_timeout(dev, s, insn, dt2814_ai_eoc, 0);
+               if (ret)
+                       return ret;
 
                hi = inb(dev->iobase + DT2814_DATA);
                lo = inb(dev->iobase + DT2814_DATA);