OSDN Git Service

arm64: vmlinux.ld: Add mmuoff data sections and move mmuoff text into idmap
authorJames Morse <james.morse@arm.com>
Thu, 19 Jul 2018 05:19:13 +0000 (10:49 +0530)
committerGerrit - the friendly Code Review server <code-review@localhost>
Tue, 7 Aug 2018 22:54:46 +0000 (15:54 -0700)
Resume from hibernate needs to clean any text executed by the kernel with
the MMU off to the PoC. Collect these functions together into the
.idmap.text section as all this code is tightly coupled and also needs
the same cleaning after resume.

Data is more complicated, secondary_holding_pen_release is written with
the MMU on, clean and invalidated, then read with the MMU off. In contrast
__boot_cpu_mode is written with the MMU off, the corresponding cache line
is invalidated, so when we read it with the MMU on we don't get stale data.
These cache maintenance operations conflict with each other if the values
are within a Cache Writeback Granule (CWG) of each other.
Collect the data into two sections .mmuoff.data.read and .mmuoff.data.write,
the linker script ensures mmuoff.data.write section is aligned to the
architectural maximum CWG of 2KB.

Change-Id: I3f5add863896e0acaa54dd11929fc1d553d402f4
Signed-off-by: James Morse <james.morse@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Git-Commit: b61130381120398876b86282082ad9f24976dfcf
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Arun KS <arunks@codeaurora.org>
arch/arm64/include/asm/sections.h
arch/arm64/kernel/head.S
arch/arm64/kernel/sleep.S
arch/arm64/kernel/smp_spin_table.c
arch/arm64/kernel/vmlinux.lds.S
arch/arm64/mm/proc.S

index 2686c43..b865e83 100644 (file)
@@ -23,5 +23,6 @@ extern char __exception_text_start[], __exception_text_end[];
 extern char __hibernate_exit_text_start[], __hibernate_exit_text_end[];
 extern char __idmap_text_start[], __idmap_text_end[];
 extern char __irqentry_text_start[], __irqentry_text_end[];
+extern char __mmuoff_data_start[], __mmuoff_data_end[];
 
 #endif /* __ASM_SECTIONS_H */
index b8121a5..d5d4afb 100644 (file)
@@ -472,7 +472,7 @@ ENDPROC(__primary_switched)
  * end early head section, begin head code that is also used for
  * hotplug and needs to have the same protections as the text region
  */
-       .section ".text","ax"
+       .section ".idmap.text","ax"
 
 ENTRY(kimage_vaddr)
        .quad           _text - TEXT_OFFSET
@@ -595,17 +595,29 @@ set_cpu_boot_mode_flag:
 ENDPROC(set_cpu_boot_mode_flag)
 
 /*
+ * These values are written with the MMU off, but read with the MMU on.
+ * Writers will invalidate the corresponding address, discarding up to a
+ * 'Cache Writeback Granule' (CWG) worth of data. The linker script ensures
+ * sufficient alignment that the CWG doesn't overlap another section.
+ */
+       .pushsection ".mmuoff.data.write", "aw"
+/*
  * We need to find out the CPU boot mode long after boot, so we need to
  * store it in a writable variable.
  *
  * This is not in .bss, because we set it sufficiently early that the boot-time
  * zeroing of .bss would clobber it.
  */
-       .pushsection    .data..cacheline_aligned
-       .align  L1_CACHE_SHIFT
 ENTRY(__boot_cpu_mode)
        .long   BOOT_CPU_MODE_EL2
        .long   BOOT_CPU_MODE_EL1
+/*
+ * The booting CPU updates the failed status @__early_cpu_boot_status,
+ * with MMU turned off.
+ */
+ENTRY(__early_cpu_boot_status)
+       .long   0
+
        .popsection
 
        /*
@@ -679,7 +691,6 @@ ENDPROC(__secondary_switched)
  * Checks if the selected granule size is supported by the CPU.
  * If it isn't, park the CPU
  */
-       .section        ".idmap.text", "ax"
 ENTRY(__enable_mmu)
        mrs     x22, sctlr_el1                  // preserve old SCTLR_EL1 value
        mrs     x1, ID_AA64MMFR0_EL1
index dd97452..100f92f 100644 (file)
@@ -97,6 +97,7 @@ ENTRY(__cpu_suspend_enter)
 ENDPROC(__cpu_suspend_enter)
        .ltorg
 
+       .pushsection ".idmap.text", "ax"
 ENTRY(cpu_resume)
        bl      el2_setup               // if in EL2 drop to EL1 cleanly
        /* enable the MMU early - so we can access sleep_save_stash by va */
@@ -107,7 +108,6 @@ ENTRY(cpu_resume)
        b       __cpu_setup
 ENDPROC(cpu_resume)
 
-       .pushsection    ".idmap.text", "ax"
 _resume_switched:
        ldr     x8, =_cpu_resume
        br      x8
index 2ccb883..303d571 100644 (file)
@@ -30,7 +30,8 @@
 #include <asm/smp_plat.h>
 
 extern void secondary_holding_pen(void);
-volatile unsigned long secondary_holding_pen_release = INVALID_HWID;
+volatile unsigned long __section(".mmuoff.data.read")
+secondary_holding_pen_release = INVALID_HWID;
 
 static phys_addr_t cpu_release_addr[NR_CPUS];
 
index 42a6c4f..71c8076 100644 (file)
@@ -197,6 +197,25 @@ SECTIONS
        _data = .;
        _sdata = .;
        RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+
+       /*
+        * Data written with the MMU off but read with the MMU on requires
+        * cache lines to be invalidated, discarding up to a Cache Writeback
+        * Granule (CWG) of data from the cache. Keep the section that
+        * requires this type of maintenance to be in its own Cache Writeback
+        * Granule (CWG) area so the cache maintenance operations don't
+        * interfere with adjacent data.
+        */
+       .mmuoff.data.write : ALIGN(SZ_2K) {
+               __mmuoff_data_start = .;
+               *(.mmuoff.data.write)
+       }
+       . = ALIGN(SZ_2K);
+       .mmuoff.data.read : {
+               *(.mmuoff.data.read)
+               __mmuoff_data_end = .;
+       }
+
        PECOFF_EDATA_PADDING
        _edata = .;
 
index 7a7cf5c..b786888 100644 (file)
@@ -132,6 +132,7 @@ ENDPROC(cpu_do_suspend)
  *
  * x0: Address of context pointer
  */
+       .pushsection ".idmap.text", "ax"
 ENTRY(cpu_do_resume)
        ldp     x2, x3, [x0]
        ldp     x4, x5, [x0, #16]
@@ -163,6 +164,7 @@ ENTRY(cpu_do_resume)
        isb
        ret
 ENDPROC(cpu_do_resume)
+       .popsection
 #endif
 
 /*
@@ -220,6 +222,7 @@ ENDPROC(idmap_cpu_replace_ttbr1)
  *     Initialise the processor for turning the MMU on.  Return in x0 the
  *     value of the SCTLR_EL1 register.
  */
+       .pushsection ".idmap.text", "ax"
 ENTRY(__cpu_setup)
        tlbi    vmalle1                         // Invalidate local TLB
        dsb     nsh
@@ -321,3 +324,4 @@ crval:
 #endif
        .word   0xfcffffff                      // clear
        .word   0x34d5d91d | CR_IBIT | CR_CBIT  // set
+       .popsection