*/
#include <linux/firmware.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
void __iomem *regs = hcd->regs;
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
const struct firmware *fw;
- int retval, index, j, time;
- int timeout = 10000;
+ int retval, index, j;
u32 data, val, temp;
u32 quirks = 0;
const struct soc_device_attribute *attr;
temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0;
writel(temp, regs + RCAR_USB3_DL_CTRL);
- for (time = 0; time < timeout; time++) {
- val = readl(regs + RCAR_USB3_DL_CTRL);
- if ((val & RCAR_USB3_DL_CTRL_FW_SET_DATA0) == 0)
- break;
- udelay(1);
- }
- if (time == timeout) {
- retval = -ETIMEDOUT;
+ retval = readl_poll_timeout_atomic(regs + RCAR_USB3_DL_CTRL,
+ val, !(val & RCAR_USB3_DL_CTRL_FW_SET_DATA0),
+ 1, 10000);
+ if (retval < 0)
break;
- }
}
temp = readl(regs + RCAR_USB3_DL_CTRL);
temp &= ~RCAR_USB3_DL_CTRL_ENABLE;
writel(temp, regs + RCAR_USB3_DL_CTRL);
- for (time = 0; time < timeout; time++) {
- val = readl(regs + RCAR_USB3_DL_CTRL);
- if (val & RCAR_USB3_DL_CTRL_FW_SUCCESS) {
- retval = 0;
- break;
- }
- udelay(1);
- }
- if (time == timeout)
- retval = -ETIMEDOUT;
+ retval = readl_poll_timeout_atomic((regs + RCAR_USB3_DL_CTRL),
+ val, val & RCAR_USB3_DL_CTRL_FW_SUCCESS, 1, 10000);
release_firmware(fw);
static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd)
{
- int timeout = 1000;
+ int retval;
u32 val, mask = RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK;
- while (timeout > 0) {
- val = readl(hcd->regs + RCAR_USB3_AXH_STA);
- if ((val & mask) == mask)
- return true;
- udelay(1);
- timeout--;
- }
-
- return false;
+ retval = readl_poll_timeout_atomic(hcd->regs + RCAR_USB3_AXH_STA,
+ val, (val & mask) == mask, 1, 1000);
+ return !retval;
}
/* This function needs to initialize a "phy" of usb before */