* @policy: cpufreq policy.
* @node: list_head to link all cpufreq_cooling_device together.
* @idle_time: idle time stats
- * @plat_get_static_power: callback to calculate the static power
*
* This structure is required for keeping information of each registered
* cpufreq_cooling_device.
struct cpufreq_policy *policy;
struct list_head node;
struct time_in_idle *idle_time;
- get_static_t plat_get_static_power;
};
static DEFINE_IDA(cpufreq_ida);
}
/**
- * get_static_power() - calculate the static power consumed by the cpus
- * @cpufreq_cdev: struct &cpufreq_cooling_device for this cpu cdev
- * @tz: thermal zone device in which we're operating
- * @freq: frequency in KHz
- * @power: pointer in which to store the calculated static power
- *
- * Calculate the static power consumed by the cpus described by
- * @cpu_actor running at frequency @freq. This function relies on a
- * platform specific function that should have been provided when the
- * actor was registered. If it wasn't, the static power is assumed to
- * be negligible. The calculated static power is stored in @power.
- *
- * Return: 0 on success, -E* on failure.
- */
-static int get_static_power(struct cpufreq_cooling_device *cpufreq_cdev,
- struct thermal_zone_device *tz, unsigned long freq,
- u32 *power)
-{
- struct dev_pm_opp *opp;
- unsigned long voltage;
- struct cpufreq_policy *policy = cpufreq_cdev->policy;
- struct cpumask *cpumask = policy->related_cpus;
- unsigned long freq_hz = freq * 1000;
- struct device *dev;
-
- if (!cpufreq_cdev->plat_get_static_power) {
- *power = 0;
- return 0;
- }
-
- dev = get_cpu_device(policy->cpu);
- WARN_ON(!dev);
-
- opp = dev_pm_opp_find_freq_exact(dev, freq_hz, true);
- if (IS_ERR(opp)) {
- dev_warn_ratelimited(dev, "Failed to find OPP for frequency %lu: %ld\n",
- freq_hz, PTR_ERR(opp));
- return -EINVAL;
- }
-
- voltage = dev_pm_opp_get_voltage(opp);
- dev_pm_opp_put(opp);
-
- if (voltage == 0) {
- dev_err_ratelimited(dev, "Failed to get voltage for frequency %lu\n",
- freq_hz);
- return -EINVAL;
- }
-
- return cpufreq_cdev->plat_get_static_power(cpumask, tz->passive_delay,
- voltage, power);
-}
-
-/**
* get_dynamic_power() - calculate the dynamic power
* @cpufreq_cdev: &cpufreq_cooling_device for this cdev
* @freq: current frequency
u32 *power)
{
unsigned long freq;
- int i = 0, cpu, ret;
- u32 static_power, dynamic_power, total_load = 0;
+ int i = 0, cpu;
+ u32 total_load = 0;
struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
struct cpufreq_policy *policy = cpufreq_cdev->policy;
u32 *load_cpu = NULL;
cpufreq_cdev->last_load = total_load;
- dynamic_power = get_dynamic_power(cpufreq_cdev, freq);
- ret = get_static_power(cpufreq_cdev, tz, freq, &static_power);
- if (ret) {
- kfree(load_cpu);
- return ret;
- }
+ *power = get_dynamic_power(cpufreq_cdev, freq);
if (load_cpu) {
trace_thermal_power_cpu_get_power(policy->related_cpus, freq,
- load_cpu, i, dynamic_power,
- static_power);
+ load_cpu, i, *power);
kfree(load_cpu);
}
- *power = static_power + dynamic_power;
return 0;
}
unsigned long state, u32 *power)
{
unsigned int freq, num_cpus;
- u32 static_power, dynamic_power;
- int ret;
struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
/* Request state should be less than max_level */
num_cpus = cpumask_weight(cpufreq_cdev->policy->cpus);
freq = cpufreq_cdev->freq_table[state].frequency;
- dynamic_power = cpu_freq_to_power(cpufreq_cdev, freq) * num_cpus;
- ret = get_static_power(cpufreq_cdev, tz, freq, &static_power);
- if (ret)
- return ret;
+ *power = cpu_freq_to_power(cpufreq_cdev, freq) * num_cpus;
- *power = static_power + dynamic_power;
- return ret;
+ return 0;
}
/**
unsigned long *state)
{
unsigned int cur_freq, target_freq;
- int ret;
- s32 dyn_power;
- u32 last_load, normalised_power, static_power;
+ u32 last_load, normalised_power;
struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
struct cpufreq_policy *policy = cpufreq_cdev->policy;
cur_freq = cpufreq_quick_get(policy->cpu);
- ret = get_static_power(cpufreq_cdev, tz, cur_freq, &static_power);
- if (ret)
- return ret;
-
- dyn_power = power - static_power;
- dyn_power = dyn_power > 0 ? dyn_power : 0;
+ power = power > 0 ? power : 0;
last_load = cpufreq_cdev->last_load ?: 1;
- normalised_power = (dyn_power * 100) / last_load;
+ normalised_power = (power * 100) / last_load;
target_freq = cpu_power_to_freq(cpufreq_cdev, normalised_power);
*state = get_level(cpufreq_cdev, target_freq);
* @policy: cpufreq policy
* Normally this should be same as cpufreq policy->related_cpus.
* @capacitance: dynamic power coefficient for these cpus
- * @plat_static_func: function to calculate the static power consumed by these
- * cpus (optional)
*
* This interface function registers the cpufreq cooling device with the name
* "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
*/
static struct thermal_cooling_device *
__cpufreq_cooling_register(struct device_node *np,
- struct cpufreq_policy *policy, u32 capacitance,
- get_static_t plat_static_func)
+ struct cpufreq_policy *policy, u32 capacitance)
{
struct thermal_cooling_device *cdev;
struct cpufreq_cooling_device *cpufreq_cdev;
}
if (capacitance) {
- cpufreq_cdev->plat_get_static_power = plat_static_func;
-
ret = update_freq_table(cpufreq_cdev, capacitance);
if (ret) {
cdev = ERR_PTR(ret);
struct thermal_cooling_device *
cpufreq_cooling_register(struct cpufreq_policy *policy)
{
- return __cpufreq_cooling_register(NULL, policy, 0, NULL);
+ return __cpufreq_cooling_register(NULL, policy, 0);
}
EXPORT_SYMBOL_GPL(cpufreq_cooling_register);
of_property_read_u32(np, "dynamic-power-coefficient",
&capacitance);
- cdev = __cpufreq_cooling_register(np, policy, capacitance,
- NULL);
+ cdev = __cpufreq_cooling_register(np, policy, capacitance);
if (IS_ERR(cdev)) {
pr_err("cpu_cooling: cpu%d is not running as cooling device: %ld\n",
policy->cpu, PTR_ERR(cdev));
#ifdef CONFIG_CPU_THERMAL
TRACE_EVENT(thermal_power_cpu_get_power,
TP_PROTO(const struct cpumask *cpus, unsigned long freq, u32 *load,
- size_t load_len, u32 dynamic_power, u32 static_power),
+ size_t load_len, u32 dynamic_power),
- TP_ARGS(cpus, freq, load, load_len, dynamic_power, static_power),
+ TP_ARGS(cpus, freq, load, load_len, dynamic_power),
TP_STRUCT__entry(
__bitmask(cpumask, num_possible_cpus())
__dynamic_array(u32, load, load_len)
__field(size_t, load_len )
__field(u32, dynamic_power )
- __field(u32, static_power )
),
TP_fast_assign(
load_len * sizeof(*load));
__entry->load_len = load_len;
__entry->dynamic_power = dynamic_power;
- __entry->static_power = static_power;
),
- TP_printk("cpus=%s freq=%lu load={%s} dynamic_power=%d static_power=%d",
+ TP_printk("cpus=%s freq=%lu load={%s} dynamic_power=%d",
__get_bitmask(cpumask), __entry->freq,
__print_array(__get_dynamic_array(load), __entry->load_len, 4),
- __entry->dynamic_power, __entry->static_power)
+ __entry->dynamic_power)
);
TRACE_EVENT(thermal_power_cpu_limit,