#
# Licensed under GPLv2
-config CPU_S3C2412
- bool
- depends on ARCH_S3C24XX
- select CPU_ARM926T
- select CPU_LLSERIAL_S3C2440
- select S3C2412_PM if PM
- select S3C2412_DMA if S3C2410_DMA
- help
- Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
-
-config CPU_S3C2412_ONLY
- bool
- depends on ARCH_S3C24XX && !CPU_S3C2410 && \
- !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
- !CPU_S3C2443 && CPU_S3C2412
- default y if CPU_S3C2412
-
-config S3C2412_DMA
- bool
- depends on CPU_S3C2412
- help
- Internal config node for S3C2412 DMA support
-
-config S3C2412_PM
- bool
- select S3C2412_PM_SLEEP
- help
- Internal config node to apply S3C2412 power management
-
-config S3C2412_PM_SLEEP
- bool
- help
- Internal config node to apply sleep for S3C2412 power management.
- Can be selected by another SoCs with similar sleep procedure.
-
# Note, the S3C2412 IOtiming support is in plat-s3c24xx
config S3C2412_CPUFREQ
default y
help
CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
-
-menu "S3C2412 Machines"
-
-config MACH_JIVE
- bool "Logitech Jive"
- select CPU_S3C2412
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the Logitech Jive.
-
-config MACH_JIVE_SHOW_BOOTLOADER
- bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)"
- depends on MACH_JIVE && EXPERIMENTAL
-
-config MACH_SMDK2413
- bool "SMDK2413"
- select CPU_S3C2412
- select MACH_S3C2413
- select MACH_SMDK
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using an SMDK2413
-
-config MACH_S3C2413
- bool
- help
- Internal node for S3C2413 version of SMDK2413, so that
- machine_is_s3c2413() will work when MACH_SMDK2413 is
- selected
-
-config MACH_SMDK2412
- bool "SMDK2412"
- select MACH_SMDK2413
- help
- Say Y here if you are using an SMDK2412
-
- Note, this shares support with SMDK2413, so will automatically
- select MACH_SMDK2413.
-
-config MACH_VSTMS
- bool "VMSTMS"
- select CPU_S3C2412
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using an VSTMS board
-
-endmenu
obj-n :=
obj- :=
-obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
-obj-$(CONFIG_CPU_S3C2412) += irq.o
-obj-$(CONFIG_CPU_S3C2412) += clock.o
-obj-$(CONFIG_S3C2412_DMA) += dma.o
-obj-$(CONFIG_S3C2412_PM) += pm.o
-obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o
obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_JIVE) += mach-jive.o
-obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
-obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
+config CPU_S3C2412
+ bool "SAMSUNG S3C2412"
+ depends on ARCH_S3C24XX
+ select CPU_ARM926T
+ select CPU_LLSERIAL_S3C2440
+ select S3C2412_PM if PM
+ select S3C2412_DMA if S3C24XX_DMA
+ help
+ Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
+
if CPU_S3C2410
config S3C2410_DMA
bool
- depends on S3C2410_DMA && CPU_S3C2410
+ depends on S3C24XX_DMA && CPU_S3C2410
default y if CPU_S3C2410
help
DMA device selection for S3C2410 and compatible CPUs
endif # CPU_S3C2410
+config S3C2412_PM_SLEEP
+ bool
+ help
+ Internal config node to apply sleep for S3C2412 power management.
+ Can be selected by another SoCs such as S3C2416 with similar
+ sleep procedure.
+
+if CPU_S3C2412
+
+config CPU_S3C2412_ONLY
+ bool
+ depends on ARCH_S3C24XX && !CPU_S3C2410 && \
+ !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
+ !CPU_S3C2443 && CPU_S3C2412
+ default y
+
+config S3C2412_DMA
+ bool
+ help
+ Internal config node for S3C2412 DMA support
+
+config S3C2412_PM
+ bool
+ help
+ Internal config node to apply S3C2412 power management
+
+comment "S3C2412 Boards"
+
+#
+# The "S3C2412 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_JIVE
+ bool "Logitech Jive"
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the Logitech Jive.
+
+config MACH_JIVE_SHOW_BOOTLOADER
+ bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)"
+ depends on MACH_JIVE && EXPERIMENTAL
+
+config MACH_S3C2413
+ bool
+ help
+ Internal node for S3C2413 version of SMDK2413, so that
+ machine_is_s3c2413() will work when MACH_SMDK2413 is
+ selected
+
+config MACH_SMDK2412
+ bool "SMDK2412"
+ select MACH_SMDK2413
+ help
+ Say Y here if you are using an SMDK2412
+
+ Note, this shares support with SMDK2413, so will automatically
+ select MACH_SMDK2413.
+
+config MACH_SMDK2413
+ bool "SMDK2413"
+ select MACH_S3C2413
+ select MACH_SMDK
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using an SMDK2413
+
+config MACH_VSTMS
+ bool "VMSTMS"
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using an VSTMS board
+
+endif # CPU_S3C2412
+
endmenu # SAMSUNG S3C24XX SoCs Support
endif # ARCH_S3C24XX
obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
+obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
+obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
+obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
+
#
# machine support
# following is ordered alphabetically by option text.
obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o
obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
+obj-$(CONFIG_MACH_JIVE) += mach-jive.o
+obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
+obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
+
# common bits of machine support
obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
OSDN Git Service
