ARM: dts: Flags D-Link DIR-685 I2C bus gpios

These GPIOs are used in open drain mode, so make sure to
flag them as such. Use the new separate scl/sda line
GPIO bindings.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index e75e2d4..a0f471e 100644 (file)
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -99,8 +99,8 @@
        gpio-i2c {
                compatible = "i2c-gpio";
                /* Collides with ICE */
-               gpios = <&gpio0 5 0>, /* SDA */
-                       <&gpio0 6 0>; /* SCL */
+               sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+               scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
                #address-cells = <1>;
                #size-cells = <0>;