return active_disp;
}
-bool bios_is_active_display(
- struct dc_bios *bios,
- enum signal_type signal,
- const struct connector_device_tag_info *device_tag)
-{
- uint32_t active = 0;
- uint32_t connected = 0;
- uint32_t bios_scratch_0 = 0;
- uint32_t bios_scratch_3 = 0;
-
- switch (signal) {
- case SIGNAL_TYPE_DVI_SINGLE_LINK:
- case SIGNAL_TYPE_DVI_DUAL_LINK:
- case SIGNAL_TYPE_HDMI_TYPE_A:
- case SIGNAL_TYPE_DISPLAY_PORT:
- case SIGNAL_TYPE_DISPLAY_PORT_MST:
- {
- if (device_tag->dev_id.device_type == DEVICE_TYPE_DFP) {
- switch (device_tag->dev_id.enum_id) {
- case 1:
- {
- active = ATOM_S3_DFP1_ACTIVE;
- connected = 0x0008; //ATOM_DISPLAY_DFP1_CONNECT
- }
- break;
-
- case 2:
- {
- active = ATOM_S3_DFP2_ACTIVE;
- connected = 0x0080; //ATOM_DISPLAY_DFP2_CONNECT
- }
- break;
-
- case 3:
- {
- active = ATOM_S3_DFP3_ACTIVE;
- connected = 0x0200; //ATOM_DISPLAY_DFP3_CONNECT
- }
- break;
-
- case 4:
- {
- active = ATOM_S3_DFP4_ACTIVE;
- connected = 0x0400; //ATOM_DISPLAY_DFP4_CONNECT
- }
- break;
-
- case 5:
- {
- active = ATOM_S3_DFP5_ACTIVE;
- connected = 0x0800; //ATOM_DISPLAY_DFP5_CONNECT
- }
- break;
-
- case 6:
- {
- active = ATOM_S3_DFP6_ACTIVE;
- connected = 0x0040; //ATOM_DISPLAY_DFP6_CONNECT
- }
- break;
-
- default:
- break;
- }
- }
- }
- break;
-
- case SIGNAL_TYPE_LVDS:
- case SIGNAL_TYPE_EDP:
- {
- active = ATOM_S3_LCD1_ACTIVE;
- connected = 0x0002; //ATOM_DISPLAY_LCD1_CONNECT
- }
- break;
-
- default:
- break;
- }
-
-
- if (bios->regs->BIOS_SCRATCH_0) /*follow up with other asic, todo*/
- bios_scratch_0 = REG_READ(BIOS_SCRATCH_0);
- if (bios->regs->BIOS_SCRATCH_3) /*follow up with other asic, todo*/
- bios_scratch_3 = REG_READ(BIOS_SCRATCH_3);
-
- bios_scratch_3 &= ATOM_S3_DEVICE_ACTIVE_MASK;
- if ((active & bios_scratch_3) && (connected & bios_scratch_0))
- return true;
-
- return false;
-}
-
void bios_set_scratch_acc_mode_change(struct dc_bios *bios);
void bios_set_scratch_critical_state(struct dc_bios *bios, bool state);
uint32_t bios_get_vga_enabled_displays(struct dc_bios *bios);
-bool bios_is_active_display(
- struct dc_bios *bios,
- enum signal_type signal,
- const struct connector_device_tag_info *device_tag);
#define GET_IMAGE(type, offset) ((type *) bios_get_image(&bp->base, offset, sizeof(type)))
int i;
struct dc_link *edp_link_to_turnoff = NULL;
struct dc_link *edp_link = get_link_for_edp(dc);
- struct dc_bios *bios = dc->ctx->dc_bios;
bool can_edp_fast_boot_optimize = false;
bool apply_edp_fast_boot_optimization = false;
if (context->streams[i]->signal == SIGNAL_TYPE_EDP) {
context->streams[i]->apply_edp_fast_boot_optimization = true;
apply_edp_fast_boot_optimization = true;
-
- /* When after S4 and S5, vbios may post edp and previous dpms_off
- * doesn't make sense.
- * Update dpms_off state to align hw and sw state via check
- * vBios scratch register.
- */
- if (bios->funcs->is_active_display) {
- const struct connector_device_tag_info *device_tag = &(edp_link->device_tag);
-
- if (bios->funcs->is_active_display(bios,
- context->streams[i]->signal,
- device_tag))
- context->streams[i]->dpms_off = false;
- }
}
}
}