OSDN Git Service

drm/i915/glk: Add cold boot sequence for GLK DSI
authorMadhav Chauhan <madhav.chauhan@intel.com>
Tue, 13 Jun 2017 07:48:15 +0000 (13:18 +0530)
committerJani Nikula <jani.nikula@intel.com>
Thu, 15 Jun 2017 20:03:57 +0000 (23:03 +0300)
As per BSEPC, if device ready bit is '0' in enable IO sequence
then its a cold boot/reset scenario eg: S3/S4 resume. If cold boot
scenario detected in enable IO, then prepare port immediately.
In normal boot scenario, prepare port after glk_dsi_device_ready().
Without cold boot sequence enabled, features like S3/S4 doesn't work.

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1497340095-5877-2-git-send-email-madhav.chauhan@intel.com
drivers/gpu/drm/i915/intel_dsi.c

index 48a078f..50ec836 100644 (file)
@@ -346,12 +346,13 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder,
        return true;
 }
 
-static void glk_dsi_enable_io(struct intel_encoder *encoder)
+static bool glk_dsi_enable_io(struct intel_encoder *encoder)
 {
        struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
        struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
        enum port port;
        u32 tmp;
+       bool cold_boot = false;
 
        /* Set the MIPI mode
         * If MIPI_Mode is off, then writing to LP_Wake bit is not reflecting.
@@ -370,7 +371,10 @@ static void glk_dsi_enable_io(struct intel_encoder *encoder)
        /* Program LP Wake */
        for_each_dsi_port(port, intel_dsi->ports) {
                tmp = I915_READ(MIPI_CTRL(port));
-               tmp |= GLK_LP_WAKE;
+               if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY))
+                       tmp &= ~GLK_LP_WAKE;
+               else
+                       tmp |= GLK_LP_WAKE;
                I915_WRITE(MIPI_CTRL(port), tmp);
        }
 
@@ -381,6 +385,14 @@ static void glk_dsi_enable_io(struct intel_encoder *encoder)
                                GLK_MIPIIO_PORT_POWERED, 20))
                        DRM_ERROR("MIPIO port is powergated\n");
        }
+
+       /* Check for cold boot scenario */
+       for_each_dsi_port(port, intel_dsi->ports) {
+               cold_boot |= !(I915_READ(MIPI_DEVICE_READY(port)) &
+                                                       DEVICE_READY);
+       }
+
+       return cold_boot;
 }
 
 static void glk_dsi_device_ready(struct intel_encoder *encoder)
@@ -410,34 +422,34 @@ static void glk_dsi_device_ready(struct intel_encoder *encoder)
                        val |= DEVICE_READY;
                        I915_WRITE(MIPI_DEVICE_READY(port), val);
                        usleep_range(10, 15);
-               }
-
-               /* Enter ULPS */
-               val = I915_READ(MIPI_DEVICE_READY(port));
-               val &= ~ULPS_STATE_MASK;
-               val |= (ULPS_STATE_ENTER | DEVICE_READY);
-               I915_WRITE(MIPI_DEVICE_READY(port), val);
+               } else {
+                       /* Enter ULPS */
+                       val = I915_READ(MIPI_DEVICE_READY(port));
+                       val &= ~ULPS_STATE_MASK;
+                       val |= (ULPS_STATE_ENTER | DEVICE_READY);
+                       I915_WRITE(MIPI_DEVICE_READY(port), val);
 
-               /* Wait for ULPS active */
-               if (intel_wait_for_register(dev_priv,
+                       /* Wait for ULPS active */
+                       if (intel_wait_for_register(dev_priv,
                                MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, 0, 20))
-                       DRM_ERROR("ULPS not active\n");
+                               DRM_ERROR("ULPS not active\n");
 
-               /* Exit ULPS */
-               val = I915_READ(MIPI_DEVICE_READY(port));
-               val &= ~ULPS_STATE_MASK;
-               val |= (ULPS_STATE_EXIT | DEVICE_READY);
-               I915_WRITE(MIPI_DEVICE_READY(port), val);
+                       /* Exit ULPS */
+                       val = I915_READ(MIPI_DEVICE_READY(port));
+                       val &= ~ULPS_STATE_MASK;
+                       val |= (ULPS_STATE_EXIT | DEVICE_READY);
+                       I915_WRITE(MIPI_DEVICE_READY(port), val);
 
-               /* Enter Normal Mode */
-               val = I915_READ(MIPI_DEVICE_READY(port));
-               val &= ~ULPS_STATE_MASK;
-               val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY);
-               I915_WRITE(MIPI_DEVICE_READY(port), val);
+                       /* Enter Normal Mode */
+                       val = I915_READ(MIPI_DEVICE_READY(port));
+                       val &= ~ULPS_STATE_MASK;
+                       val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY);
+                       I915_WRITE(MIPI_DEVICE_READY(port), val);
 
-               val = I915_READ(MIPI_CTRL(port));
-               val &= ~GLK_LP_WAKE;
-               I915_WRITE(MIPI_CTRL(port), val);
+                       val = I915_READ(MIPI_CTRL(port));
+                       val &= ~GLK_LP_WAKE;
+                       I915_WRITE(MIPI_CTRL(port), val);
+               }
        }
 
        /* Wait for Stop state */
@@ -778,6 +790,7 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,
        struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
        enum port port;
        u32 val;
+       bool glk_cold_boot = false;
 
        DRM_DEBUG_KMS("\n");
 
@@ -808,7 +821,8 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,
                I915_WRITE(DSPCLK_GATE_D, val);
        }
 
-       intel_dsi_prepare(encoder, pipe_config);
+       if (!IS_GEMINILAKE(dev_priv))
+               intel_dsi_prepare(encoder, pipe_config);
 
        /* Power on, try both CRC pmic gpio and VBT */
        if (intel_dsi->gpio_panel)
@@ -819,12 +833,21 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,
        /* Deassert reset */
        intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DEASSERT_RESET);
 
-       if (IS_GEMINILAKE(dev_priv))
-               glk_dsi_enable_io(encoder);
+       if (IS_GEMINILAKE(dev_priv)) {
+               glk_cold_boot = glk_dsi_enable_io(encoder);
+
+               /* Prepare port in cold boot(s3/s4) scenario */
+               if (glk_cold_boot)
+                       intel_dsi_prepare(encoder, pipe_config);
+       }
 
        /* Put device in ready state (LP-11) */
        intel_dsi_device_ready(encoder);
 
+       /* Prepare port in normal boot scenario */
+       if (IS_GEMINILAKE(dev_priv) && !glk_cold_boot)
+               intel_dsi_prepare(encoder, pipe_config);
+
        /* Send initialization commands in LP mode */
        intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_INIT_OTP);