OSDN Git Service

Documentation, dt, socfpga: Add Altera Arria10 L2 cache binding
authorThor Thayer <tthayer@opensource.altera.com>
Mon, 21 Mar 2016 16:01:43 +0000 (11:01 -0500)
committerBorislav Petkov <bp@suse.de>
Tue, 29 Mar 2016 08:30:07 +0000 (10:30 +0200)
Add the device tree bindings needed to support the Altera L2 cache on
the Arria10 chip. Since all the peripherals share IRQs, the IRQ fields
are now in the ecc_manager.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: dinguyen@opensource.altera.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@arm.linux.org.uk
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1458576106-24505-7-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt

index 885f93d..37ff9bf 100644 (file)
@@ -3,6 +3,7 @@ This driver uses the EDAC framework to implement the SOCFPGA ECC Manager.
 The ECC Manager counts and corrects single bit errors and counts/handles
 double bit errors which are uncorrectable.
 
+Cyclone5 and Arria5 ECC Manager
 Required Properties:
 - compatible : Should be "altr,socfpga-ecc-manager"
 - #address-cells: must be 1
@@ -47,3 +48,42 @@ Example:
                        interrupts = <0 178 1>, <0 179 1>;
                };
        };
+
+Arria10 SoCFPGA ECC Manager
+The Arria10 SoC ECC Manager handles the IRQs for each peripheral
+in a shared register instead of individual IRQs like the Cyclone5
+and Arria5. Therefore the device tree is different as well.
+
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-ecc-manager"
+- altr,sysgr-syscon : phandle to Arria10 System Manager Block
+       containing the ECC manager registers.
+- #address-cells: must be 1
+- #size-cells: must be 1
+- interrupts : Should be single bit error interrupt, then double bit error
+       interrupt. Note the rising edge type.
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+L2 Cache ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-l2-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+
+Example:
+
+       eccmgr: eccmgr@ffd06000 {
+               compatible = "altr,socfpga-a10-ecc-manager";
+               altr,sysmgr-syscon = <&sysmgr>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 IRQ_TYPE_LEVEL_HIGH>;
+               ranges;
+
+               l2-ecc@ffd06010 {
+                       compatible = "altr,socfpga-a10-l2-ecc";
+                       reg = <0xffd06010 0x4>;
+               };
+       };