dt-bindings: thermal: remove no longer needed samsung thermal properties

Remove documentation for longer needed samsung thermal properties.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index 1b596fd..b957acf 100644 (file)
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -49,19 +49,6 @@ on the SoC (only first trip points defined in DT will be configured):
  - samsung,exynos5433-tmu: 8
  - samsung,exynos7-tmu: 8
 
-Following properties are mandatory (depending on SoC):
-- samsung,tmu_gain: Gain value for internal TMU operation.
-- samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage
-- samsung,tmu_noise_cancel_mode: Mode for noise cancellation
-- samsung,tmu_efuse_value: Default level of temperature - it is needed when
-                          in factory fusing produced wrong value
-- samsung,tmu_min_efuse_value: Minimum temperature fused value
-- samsung,tmu_max_efuse_value: Maximum temperature fused value
-- samsung,tmu_first_point_trim: First point trimming value
-- samsung,tmu_second_point_trim: Second point trimming value
-- samsung,tmu_default_temp_offset: Default temperature offset
-- samsung,tmu_cal_type: Callibration type
-
 ** Optional properties:
 
 - vtmu-supply: This entry is optional and provides the regulator node supplying
@@ -78,7 +65,7 @@ Example 1):
                clocks = <&clock 383>;
                clock-names = "tmu_apbif";
                vtmu-supply = <&tmu_regulator_node>;
-               #include "exynos4412-tmu-sensor-conf.dtsi"
+               #thermal-sensor-cells = <0>;
        };
 
 Example 2):
@@ -89,7 +76,7 @@ Example 2):
                interrupts = <0 58 0>;
                clocks = <&clock 21>;
                clock-names = "tmu_apbif";
-               #include "exynos5440-tmu-sensor-conf.dtsi"
+               #thermal-sensor-cells = <0>;
        };
 
 Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
@@ -99,7 +86,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
                interrupts = <0 184 0>;
                clocks = <&clock 318>, <&clock 318>;
                clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-               #include "exynos4412-tmu-sensor-conf.dtsi"
+               #thermal-sensor-cells = <0>;
        };
 
        tmu_cpu3: tmu@1006c000 {
@@ -108,7 +95,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
                interrupts = <0 185 0>;
                clocks = <&clock 318>, <&clock 319>;
                clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-               #include "exynos4412-tmu-sensor-conf.dtsi"
+               #thermal-sensor-cells = <0>;
        };
 
        tmu_gpu: tmu@100a0000 {
@@ -117,7 +104,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
                interrupts = <0 215 0>;
                clocks = <&clock 319>, <&clock 318>;
                clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-               #include "exynos4412-tmu-sensor-conf.dtsi"
+               #thermal-sensor-cells = <0>;
        };
 
 Note: For multi-instance tmu each instance should have an alias correctly