[media] v4l: vsp1: Adapt vsp1_du_setup_lif() interface to use a structure

The interface to configure the LIF in the VSP1 requires adapting the
function prototype for any changes. This makes extending the interface
difficult.

Change the function prototype to pass a structure which can be easily
extended.

This changes the means of disabling the pipeline, by now passing a NULL
configuration rather than passing either a 0 width or height.

[Fixed kerneldoc, made vsp1_du_setup_lif() cfg argument const]

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
index 83ebd16..22da2d6 100644 (file)
--- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
@@ -32,6 +32,10 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
 {
        const struct drm_display_mode *mode = &crtc->crtc.state->adjusted_mode;
        struct rcar_du_device *rcdu = crtc->group->dev;
+       struct vsp1_du_lif_config cfg = {
+               .width = mode->hdisplay,
+               .height = mode->vdisplay,
+       };
        struct rcar_du_plane_state state = {
                .state = {
                        .crtc = &crtc->crtc,
@@ -66,12 +70,12 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
         */
        crtc->group->need_restart = true;
 
-       vsp1_du_setup_lif(crtc->vsp->vsp, mode->hdisplay, mode->vdisplay);
+       vsp1_du_setup_lif(crtc->vsp->vsp, &cfg);
 }
 
 void rcar_du_vsp_disable(struct rcar_du_crtc *crtc)
 {
-       vsp1_du_setup_lif(crtc->vsp->vsp, 0, 0);
+       vsp1_du_setup_lif(crtc->vsp->vsp, NULL);
 }
 
 void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc)

diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
index b4b583f..b4c0f10 100644 (file)
--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -54,12 +54,11 @@ EXPORT_SYMBOL_GPL(vsp1_du_init);
 /**
  * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
  * @dev: the VSP device
- * @width: output frame width in pixels
- * @height: output frame height in pixels
+ * @cfg: the LIF configuration
  *
- * Configure the output part of VSP DRM pipeline for the given frame @width and
- * @height. This sets up formats on the BRU source pad, the WPF0 sink and source
- * pads, and the LIF sink pad.
+ * Configure the output part of VSP DRM pipeline for the given frame @cfg.width
+ * and @cfg.height. This sets up formats on the BRU source pad, the WPF0 sink
+ * and source pads, and the LIF sink pad.
  *
  * As the media bus code on the BRU source pad is conditioned by the
  * configuration of the BRU sink 0 pad, we also set up the formats on all BRU
@@ -69,8 +68,7 @@ EXPORT_SYMBOL_GPL(vsp1_du_init);
  *
  * Return 0 on success or a negative error code on failure.
  */
-int vsp1_du_setup_lif(struct device *dev, unsigned int width,
-                     unsigned int height)
+int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg)
 {
        struct vsp1_device *vsp1 = dev_get_drvdata(dev);
        struct vsp1_pipeline *pipe = &vsp1->drm->pipe;
@@ -79,11 +77,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
        unsigned int i;
        int ret;
 
-       dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n",
-               __func__, width, height);
-
-       if (width == 0 || height == 0) {
-               /* Zero width or height means the CRTC is being disabled, stop
+       if (!cfg) {
+               /* NULL configuration means the CRTC is being disabled, stop
                 * the pipeline and turn the light off.
                 */
                ret = vsp1_pipeline_stop(pipe);
@@ -108,6 +103,9 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
                return 0;
        }
 
+       dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n",
+               __func__, cfg->width, cfg->height);
+
        /* Configure the format at the BRU sinks and propagate it through the
         * pipeline.
         */
@@ -117,8 +115,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
        for (i = 0; i < bru->entity.source_pad; ++i) {
                format.pad = i;
 
-               format.format.width = width;
-               format.format.height = height;
+               format.format.width = cfg->width;
+               format.format.height = cfg->height;
                format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
                format.format.field = V4L2_FIELD_NONE;
 
@@ -133,8 +131,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
        }
 
        format.pad = bru->entity.source_pad;
-       format.format.width = width;
-       format.format.height = height;
+       format.format.width = cfg->width;
+       format.format.height = cfg->height;
        format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
        format.format.field = V4L2_FIELD_NONE;
 
@@ -180,7 +178,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
        /* Verify that the format at the output of the pipeline matches the
         * requested frame size and media bus code.
         */
-       if (format.format.width != width || format.format.height != height ||
+       if (format.format.width != cfg->width ||
+           format.format.height != cfg->height ||
            format.format.code != MEDIA_BUS_FMT_ARGB8888_1X32) {
                dev_dbg(vsp1->dev, "%s: format mismatch\n", __func__);
                return -EPIPE;

diff --git a/include/media/vsp1.h b/include/media/vsp1.h
index 458b400..38aac55 100644 (file)
--- a/include/media/vsp1.h
+++ b/include/media/vsp1.h
@@ -20,8 +20,17 @@ struct device;
 
 int vsp1_du_init(struct device *dev);
 
-int vsp1_du_setup_lif(struct device *dev, unsigned int width,
-                     unsigned int height);
+/**
+ * struct vsp1_du_lif_config - VSP LIF configuration
+ * @width: output frame width
+ * @height: output frame height
+ */
+struct vsp1_du_lif_config {
+       unsigned int width;
+       unsigned int height;
+};
+
+int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg);
 
 struct vsp1_du_atomic_config {
        u32 pixelformat;