+++ /dev/null
-## Sample initialization file for GNU nano.
-##
-## This file should not be in DOS or Mac format, and characters
-## specially interpreted by the shell should not be escaped here.
-##
-## To make sure an option is disabled, use "unset <option>".
-##
-## For the options that take parameters, the default value is given.
-## Other options are unset by default.
-##
-## Inside string parameters, quotes should not be escaped. The last
-## double quote on the line will be seen as the closing quote.
-
-## Make the 'nextword' function (Ctrl+Right) stop at word ends
-## instead of at beginnings.
-# set afterends
-
-## When soft line wrapping is enabled, make it wrap lines at blanks
-## (tabs and spaces) instead of always at the edge of the screen.
-# set atblanks
-
-## Automatically indent a newly created line to the same number of
-## tabs and/or spaces as the preceding line -- or as the next line
-## if the preceding line is the beginning of a paragraph.
-# set autoindent
-
-## Back up files to the current filename plus a tilde.
-# set backup
-
-## The directory to put unique backup files in.
-# set backupdir ""
-
-## Use bold text instead of reverse video text.
-# set boldtext
-
-## The characters treated as closing brackets when justifying paragraphs.
-## This may not include any blank characters. Only closing punctuation,
-## optionally followed by these closing brackets, can end sentences.
-# set brackets ""')>]}"
-
-## Automatically hard-wrap the current line when it becomes overlong.
-# set breaklonglines
-
-## Do case-sensitive searches by default.
-# set casesensitive
-
-## Constantly display the cursor position in the status bar. Note that
-## this overrides "quickblank".
-# set constantshow
-
-## Use cut-from-cursor-to-end-of-line by default.
-# set cutfromcursor
-
-## Do not use the line below the title bar, leaving it entirely blank.
-# set emptyline
-
-## Enable hard-wrapping and set the target width, both for automatic
-## line wrapping and for justifying paragraphs. If the value is 0 or
-## less, the wrapping point will be the screen width minus this number.
-# set fill -8
-
-## Remember the used search/replace strings for the next session.
-# set historylog
-
-## Scroll the buffer contents per half-screen instead of per line.
-# set jumpyscrolling
-
-## Display line numbers to the left of the text.
-set linenumbers
-
-## Enable vim-style lock-files. This is just to let a vim user know you
-## are editing a file [s]he is trying to edit and vice versa. There are
-## no plans to implement vim-style undo state in these files.
-# set locking
-
-## The opening and closing brackets that can be found by bracket
-## searches. They cannot contain blank characters. The former set must
-## come before the latter set, and both must be in the same order.
-# set matchbrackets "(<[{)>]}"
-
-## Enable mouse support, if available for your system. When enabled,
-## mouse clicks can be used to place the cursor, set the mark (with a
-## double click), and execute shortcuts. The mouse will work in the X
-## Window System, and on the console when gpm is running.
-# set mouse
-
-## Switch on multiple file buffers (inserting a file will put it into
-## a separate buffer).
-# set multibuffer
-
-## Don't convert files from DOS/Mac format.
-# set noconvert
-
-## Don't display the helpful shortcut lists at the bottom of the screen.
-# set nohelp
-
-## Don't automatically add a newline when a file does not end with one.
-# set nonewlines
-
-## Don't pause between warnings at startup. Which means that only the
-## last one will be readable (when there are multiple ones).
-# set nopauses
-
-## Set operating directory. nano will not read or write files outside
-## this directory and its subdirectories. Also, the current directory
-## is changed to here, so any files are inserted from this dir. A blank
-## string means the operating-directory feature is turned off.
-# set operatingdir ""
-
-## Remember the cursor position in each file for the next editing session.
-# set positionlog
-
-## Preserve the XON and XOFF keys (^Q and ^S).
-# set preserve
-
-## The characters treated as closing punctuation when justifying
-## paragraphs. They cannot contain blank characters. Only closing
-## punctuation, optionally followed by closing brackets, can end
-## sentences.
-# set punct "!.?"
-
-## Do quick status-bar blanking. Status-bar messages will disappear after
-## 1 keystroke instead of 26. Note that "constantshow" overrides this.
-# set quickblank
-
-## The regular expression that matches quoting characters in email
-## or line-comment introducers in source code. The default is:
-# set quotestr "^([ ]*([!#%:;>|}]|//))+"
-
-## Try to work around a mismatching terminfo terminal description.
-# set rawsequences
-
-## Fix Backspace/Delete confusion problem.
-# set rebinddelete
-
-## Do regular-expression searches by default.
-## Regular expressions are of the extended type (ERE).
-# set regexp
-
-## Put the cursor on the highlighted item in the file browser, and show
-## the cursor in the help viewer; useful for people who use a braille
-## display and people with poor vision.
-# set showcursor
-
-## Make the Home key smarter. When Home is pressed anywhere but at the
-## very beginning of non-whitespace characters on a line, the cursor
-## will jump to that beginning (either forwards or backwards). If the
-## cursor is already at that position, it will jump to the true
-## beginning of the line.
-# set smarthome
-
-## Enable soft line wrapping (AKA full-line display).
-# set softwrap
-
-## Use this spelling checker instead of the internal one. This option
-## does not have a default value.
-# set speller "aspell -x -c"
-
-## Allow nano to be suspended.
-# set suspend
-
-## Use this tab size instead of the default; it must be greater than 0.
-set tabsize 4
-
-## Convert typed tabs to spaces.
-# set tabstospaces
-
-## Save automatically on exit; don't prompt.
-# set tempfile
-
-## Snip whitespace at the end of lines when justifying or hard-wrapping.
-# set trimblanks
-
-## Disallow file modification. Why would you want this in an rcfile? ;)
-# set view
-
-## The two single-column characters used to display the first characters
-## of tabs and spaces. 187 in ISO 8859-1 (0000BB in Unicode) and 183 in
-## ISO-8859-1 (0000B7 in Unicode) seem to be good values for these.
-## The default when in a UTF-8 locale:
-# set whitespace "»·"
-## The default otherwise:
-# set whitespace ">."
-
-## Detect word boundaries differently by treating punctuation
-## characters as parts of words.
-# set wordbounds
-
-## The characters (besides alphanumeric ones) that should be considered
-## as parts of words. This option does not have a default value. When
-## set, it overrides option 'set wordbounds'.
-# set wordchars "<_>."
-
-## Let an unmodified Backspace or Delete erase the marked region (instead
-## of a single character, and without affecting the cutbuffer).
-# set zap
-
-## Paint the interface elements of nano. These are examples;
-## by default there are no colors, except for errorcolor.
-# set titlecolor brightwhite,blue
-# set statuscolor brightwhite,green
-# set errorcolor brightwhite,red
-# set selectedcolor brightwhite,magenta
-# set stripecolor ,yellow
-# set numbercolor cyan
-# set keycolor cyan
-# set functioncolor green
-## In root's .nanorc you might want to use:
-# set titlecolor brightwhite,magenta
-# set statuscolor brightwhite,magenta
-# set errorcolor brightwhite,red
-# set selectedcolor brightwhite,cyan
-# set stripecolor ,yellow
-# set numbercolor magenta
-# set keycolor brightmagenta
-# set functioncolor magenta
-
-
-## Setup of syntax coloring.
-##
-## Format:
-##
-## syntax "short description" ["filename regex" ...]
-##
-## The "none" syntax is reserved; specifying it on the command line is
-## the same as not having a syntax at all. The "default" syntax is
-## special: it takes no filename regexes, and applies to files that
-## don't match any other syntax's filename regexes.
-##
-## color foreground,background "regex" ["regex"...]
-## or
-## icolor foreground,background "regex" ["regex"...]
-##
-## "color" will do case-sensitive matches, while "icolor" will do
-## case-insensitive matches.
-##
-## Valid color names ares: white, black, normal, red, blue, green,
-## yellow, magenta, cyan. For foreground colors, you may use the
-## prefix "bright" to get a stronger highlight.
-##
-## All regexes (regular expressions) are of the extended type (ERE).
-##
-## To use multi-line regexes, use the start="regex" end="regex"
-## [start="regex" end="regex"...] format.
-##
-## If your system supports transparency, not specifying a background
-## color will use a transparent color. If you don't want this, be sure
-## to set the background color to black or white.
-##
-## If you wish, you may put your syntax definitions in separate files.
-## You can make use of such files as follows:
-##
-## include "/path/to/syntax_file.nanorc"
-##
-## Unless otherwise noted, the name of the syntax file (without the
-## ".nanorc" extension) should be the same as the "short description"
-## name inside that file. These names are kept fairly short to make
-## them easier to remember and faster to type using nano's -Y option.
-
-## To include all existing syntax definitions, you can do:
-# include "/usr/share/nano/*.nanorc"
-
-
-## If <Tab> should always produce four spaces when editing a Python file,
-## independent of the settings of 'tabsize' and 'tabstospaces':
-# extendsyntax python tabgives " "
-#
-## If <Tab> should always produce an actual TAB when editing a Makefile:
-# extendsyntax makefile tabgives " "
-
-
-## Key bindings.
-## See nanorc(5) (section REBINDING KEYS) for more details on this.
-
-## The <Ctrl+Delete> keystroke deletes the word to the right of the cursor.
-## On some terminals the <Ctrl+Backspace> keystroke produces ^H, which is
-## the ASCII character for backspace, so it is bound by default to the
-## backspace function. The <Backspace> key itself produces a different
-## keycode, which is hard-bound to the backspace function. So, if you
-## normally use <Backspace> for backspacing and not ^H, you can make
-## <Ctrl+Backspace> delete the word to the left of the cursor with:
-# bind ^H chopwordleft main
-
-## If you would like nano to have keybindings that are more "usual",
-## such as ^O for Open, ^F for Find, ^H for Help, and ^Q for Quit,
-## then uncomment these:
-#bind ^Q exit all
-#bind ^H help all
-#bind ^H exit help
-#bind ^F whereis all
-#bind ^G findnext all
-#bind ^B wherewas all
-#bind ^D findprevious all
-#bind ^R replace main
-#bind ^W writeout main
-#bind ^O insert main
-#unbind ^V all
-#unbind ^Y all
-#bind M-X flipnewbuffer all
-#bind ^X cut all
-#bind ^C copy all
-#bind ^V paste all
-#bind ^P curpos main
-#bind ^T gotoline main
-#bind ^T gotodir browser
-#bind ^Y speller main
-#unbind ^K all
-#unbind ^U all
-#bind M-R redo main
-#bind ^U undo main
-#bind ^E redo main
-#unbind M-J main
-#unbind M-T main
-#set multibuffer
OSDN Git Service
