soc-camera
uvcvideo
vivid
- zoran
zr364xx
+++ /dev/null
-.. SPDX-License-Identifier: GPL-2.0
-
-The Zoran driver
-================
-
-unified zoran driver (zr360x7, zoran, buz, dc10(+), dc30(+), lml33)
-
-website: http://mjpeg.sourceforge.net/driver-zoran/
-
-
-Frequently Asked Questions
---------------------------
-
-What cards are supported
-------------------------
-
-Iomega Buz, Linux Media Labs LML33/LML33R10, Pinnacle/Miro
-DC10/DC10+/DC30/DC30+ and related boards (available under various names).
-
-Iomega Buz
-~~~~~~~~~~
-
-* Zoran zr36067 PCI controller
-* Zoran zr36060 MJPEG codec
-* Philips saa7111 TV decoder
-* Philips saa7185 TV encoder
-
-Drivers to use: videodev, i2c-core, i2c-algo-bit,
-videocodec, saa7111, saa7185, zr36060, zr36067
-
-Inputs/outputs: Composite and S-video
-
-Norms: PAL, SECAM (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
-
-Card number: 7
-
-AverMedia 6 Eyes AVS6EYES
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-* Zoran zr36067 PCI controller
-* Zoran zr36060 MJPEG codec
-* Samsung ks0127 TV decoder
-* Conexant bt866 TV encoder
-
-Drivers to use: videodev, i2c-core, i2c-algo-bit,
-videocodec, ks0127, bt866, zr36060, zr36067
-
-Inputs/outputs:
- Six physical inputs. 1-6 are composite,
- 1-2, 3-4, 5-6 doubles as S-video,
- 1-3 triples as component.
- One composite output.
-
-Norms: PAL, SECAM (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
-
-Card number: 8
-
-.. note::
-
- Not autodetected, card=8 is necessary.
-
-Linux Media Labs LML33
-~~~~~~~~~~~~~~~~~~~~~~
-
-* Zoran zr36067 PCI controller
-* Zoran zr36060 MJPEG codec
-* Brooktree bt819 TV decoder
-* Brooktree bt856 TV encoder
-
-Drivers to use: videodev, i2c-core, i2c-algo-bit,
-videocodec, bt819, bt856, zr36060, zr36067
-
-Inputs/outputs: Composite and S-video
-
-Norms: PAL (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
-
-Card number: 5
-
-Linux Media Labs LML33R10
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-* Zoran zr36067 PCI controller
-* Zoran zr36060 MJPEG codec
-* Philips saa7114 TV decoder
-* Analog Devices adv7170 TV encoder
-
-Drivers to use: videodev, i2c-core, i2c-algo-bit,
-videocodec, saa7114, adv7170, zr36060, zr36067
-
-Inputs/outputs: Composite and S-video
-
-Norms: PAL (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
-
-Card number: 6
-
-Pinnacle/Miro DC10(new)
-~~~~~~~~~~~~~~~~~~~~~~~
-
-* Zoran zr36057 PCI controller
-* Zoran zr36060 MJPEG codec
-* Philips saa7110a TV decoder
-* Analog Devices adv7176 TV encoder
-
-Drivers to use: videodev, i2c-core, i2c-algo-bit,
-videocodec, saa7110, adv7175, zr36060, zr36067
-
-Inputs/outputs: Composite, S-video and Internal
-
-Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
-
-Card number: 1
-
-Pinnacle/Miro DC10+
-~~~~~~~~~~~~~~~~~~~
-
-* Zoran zr36067 PCI controller
-* Zoran zr36060 MJPEG codec
-* Philips saa7110a TV decoder
-* Analog Devices adv7176 TV encoder
-
-Drivers to use: videodev, i2c-core, i2c-algo-bit,
-videocodec, sa7110, adv7175, zr36060, zr36067
-
-Inputs/outputs: Composite, S-video and Internal
-
-Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
-
-Card number: 2
-
-Pinnacle/Miro DC10(old)
-~~~~~~~~~~~~~~~~~~~~~~~
-
-* Zoran zr36057 PCI controller
-* Zoran zr36050 MJPEG codec
-* Zoran zr36016 Video Front End or Fuji md0211 Video Front End (clone?)
-* Micronas vpx3220a TV decoder
-* mse3000 TV encoder or Analog Devices adv7176 TV encoder
-
-Drivers to use: videodev, i2c-core, i2c-algo-bit,
-videocodec, vpx3220, mse3000/adv7175, zr36050, zr36016, zr36067
-
-Inputs/outputs: Composite, S-video and Internal
-
-Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
-
-Card number: 0
-
-Pinnacle/Miro DC30
-~~~~~~~~~~~~~~~~~~
-
-* Zoran zr36057 PCI controller
-* Zoran zr36050 MJPEG codec
-* Zoran zr36016 Video Front End
-* Micronas vpx3225d/vpx3220a/vpx3216b TV decoder
-* Analog Devices adv7176 TV encoder
-
-Drivers to use: videodev, i2c-core, i2c-algo-bit,
-videocodec, vpx3220/vpx3224, adv7175, zr36050, zr36016, zr36067
-
-Inputs/outputs: Composite, S-video and Internal
-
-Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
-
-Card number: 3
-
-Pinnacle/Miro DC30+
-~~~~~~~~~~~~~~~~~~~
-
-* Zoran zr36067 PCI controller
-* Zoran zr36050 MJPEG codec
-* Zoran zr36016 Video Front End
-* Micronas vpx3225d/vpx3220a/vpx3216b TV decoder
-* Analog Devices adv7176 TV encoder
-
-Drivers to use: videodev, i2c-core, i2c-algo-bit,
-videocodec, vpx3220/vpx3224, adv7175, zr36050, zr36015, zr36067
-
-Inputs/outputs: Composite, S-video and Internal
-
-Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
-
-Card number: 4
-
-.. note::
-
- #) No module for the mse3000 is available yet
- #) No module for the vpx3224 is available yet
-
-1.1 What the TV decoder can do an what not
-------------------------------------------
-
-The best know TV standards are NTSC/PAL/SECAM. but for decoding a frame that
-information is not enough. There are several formats of the TV standards.
-And not every TV decoder is able to handle every format. Also the every
-combination is supported by the driver. There are currently 11 different
-tv broadcast formats all aver the world.
-
-The CCIR defines parameters needed for broadcasting the signal.
-The CCIR has defined different standards: A,B,D,E,F,G,D,H,I,K,K1,L,M,N,...
-The CCIR says not much about the colorsystem used !!!
-And talking about a colorsystem says not to much about how it is broadcast.
-
-The CCIR standards A,E,F are not used any more.
-
-When you speak about NTSC, you usually mean the standard: CCIR - M using
-the NTSC colorsystem which is used in the USA, Japan, Mexico, Canada
-and a few others.
-
-When you talk about PAL, you usually mean: CCIR - B/G using the PAL
-colorsystem which is used in many Countries.
-
-When you talk about SECAM, you mean: CCIR - L using the SECAM Colorsystem
-which is used in France, and a few others.
-
-There the other version of SECAM, CCIR - D/K is used in Bulgaria, China,
-Slovakai, Hungary, Korea (Rep.), Poland, Rumania and a others.
-
-The CCIR - H uses the PAL colorsystem (sometimes SECAM) and is used in
-Egypt, Libya, Sri Lanka, Syrain Arab. Rep.
-
-The CCIR - I uses the PAL colorsystem, and is used in Great Britain, Hong Kong,
-Ireland, Nigeria, South Africa.
-
-The CCIR - N uses the PAL colorsystem and PAL frame size but the NTSC framerate,
-and is used in Argentinia, Uruguay, an a few others
-
-We do not talk about how the audio is broadcast !
-
-A rather good sites about the TV standards are:
-http://www.sony.jp/support/
-http://info.electronicwerkstatt.de/bereiche/fernsehtechnik/frequenzen_und_normen/Fernsehnormen/
-and http://www.cabl.com/restaurant/channel.html
-
-Other weird things around: NTSC 4.43 is a modificated NTSC, which is mainly
-used in PAL VCR's that are able to play back NTSC. PAL 60 seems to be the same
-as NTSC 4.43 . The Datasheets also talk about NTSC 44, It seems as if it would
-be the same as NTSC 4.43.
-NTSC Combs seems to be a decoder mode where the decoder uses a comb filter
-to split coma and luma instead of a Delay line.
-
-But I did not defiantly find out what NTSC Comb is.
-
-Philips saa7111 TV decoder
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- was introduced in 1997, is used in the BUZ and
-- can handle: PAL B/G/H/I, PAL N, PAL M, NTSC M, NTSC N, NTSC 4.43 and SECAM
-
-Philips saa7110a TV decoder
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- was introduced in 1995, is used in the Pinnacle/Miro DC10(new), DC10+ and
-- can handle: PAL B/G, NTSC M and SECAM
-
-Philips saa7114 TV decoder
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- was introduced in 2000, is used in the LML33R10 and
-- can handle: PAL B/G/D/H/I/N, PAL N, PAL M, NTSC M, NTSC 4.43 and SECAM
-
-Brooktree bt819 TV decoder
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- was introduced in 1996, and is used in the LML33 and
-- can handle: PAL B/D/G/H/I, NTSC M
-
-Micronas vpx3220a TV decoder
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- was introduced in 1996, is used in the DC30 and DC30+ and
-- can handle: PAL B/G/H/I, PAL N, PAL M, NTSC M, NTSC 44, PAL 60, SECAM,NTSC Comb
-
-Samsung ks0127 TV decoder
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- is used in the AVS6EYES card and
-- can handle: NTSC-M/N/44, PAL-M/N/B/G/H/I/D/K/L and SECAM
-
-
-What the TV encoder can do an what not
---------------------------------------
-
-The TV encoder are doing the "same" as the decoder, but in the oder direction.
-You feed them digital data and the generate a Composite or SVHS signal.
-For information about the colorsystems and TV norm take a look in the
-TV decoder section.
-
-Philips saa7185 TV Encoder
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- was introduced in 1996, is used in the BUZ
-- can generate: PAL B/G, NTSC M
-
-Brooktree bt856 TV Encoder
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- was introduced in 1994, is used in the LML33
-- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M, PAL-N (Argentina)
-
-Analog Devices adv7170 TV Encoder
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- was introduced in 2000, is used in the LML300R10
-- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M, PAL 60
-
-Analog Devices adv7175 TV Encoder
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- was introduced in 1996, is used in the DC10, DC10+, DC10 old, DC30, DC30+
-- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M
-
-ITT mse3000 TV encoder
-~~~~~~~~~~~~~~~~~~~~~~
-
-- was introduced in 1991, is used in the DC10 old
-- can generate: PAL , NTSC , SECAM
-
-Conexant bt866 TV encoder
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- is used in AVS6EYES, and
-- can generate: NTSC/PAL, PALM, PALN
-
-The adv717x, should be able to produce PAL N. But you find nothing PAL N
-specific in the registers. Seem that you have to reuse a other standard
-to generate PAL N, maybe it would work if you use the PAL M settings.
-
-How do I get this damn thing to work
-------------------------------------
-
-Load zr36067.o. If it can't autodetect your card, use the card=X insmod
-option with X being the card number as given in the previous section.
-To have more than one card, use card=X1[,X2[,X3,[X4[..]]]]
-
-To automate this, add the following to your /etc/modprobe.d/zoran.conf:
-
-options zr36067 card=X1[,X2[,X3[,X4[..]]]]
-alias char-major-81-0 zr36067
-
-One thing to keep in mind is that this doesn't load zr36067.o itself yet. It
-just automates loading. If you start using xawtv, the device won't load on
-some systems, since you're trying to load modules as a user, which is not
-allowed ("permission denied"). A quick workaround is to add 'Load "v4l"' to
-XF86Config-4 when you use X by default, or to run 'v4l-conf -c <device>' in
-one of your startup scripts (normally rc.local) if you don't use X. Both
-make sure that the modules are loaded on startup, under the root account.
-
-What mainboard should I use (or why doesn't my card work)
----------------------------------------------------------
-
-
-<insert lousy disclaimer here>. In short: good=SiS/Intel, bad=VIA.
-
-Experience tells us that people with a Buz, on average, have more problems
-than users with a DC10+/LML33. Also, it tells us that people owning a VIA-
-based mainboard (ktXXX, MVP3) have more problems than users with a mainboard
-based on a different chipset. Here's some notes from Andrew Stevens:
-
-Here's my experience of using LML33 and Buz on various motherboards:
-
-- VIA MVP3
- - Forget it. Pointless. Doesn't work.
-- Intel 430FX (Pentium 200)
- - LML33 perfect, Buz tolerable (3 or 4 frames dropped per movie)
-- Intel 440BX (early stepping)
- - LML33 tolerable. Buz starting to get annoying (6-10 frames/hour)
-- Intel 440BX (late stepping)
- - Buz tolerable, LML3 almost perfect (occasional single frame drops)
-- SiS735
- - LML33 perfect, Buz tolerable.
-- VIA KT133(*)
- - LML33 starting to get annoying, Buz poor enough that I have up.
-
-- Both 440BX boards were dual CPU versions.
-
-Bernhard Praschinger later added:
-
-- AMD 751
- - Buz perfect-tolerable
-- AMD 760
- - Buz perfect-tolerable
-
-In general, people on the user mailinglist won't give you much of a chance
-if you have a VIA-based motherboard. They may be cheap, but sometimes, you'd
-rather want to spend some more money on better boards. In general, VIA
-mainboard's IDE/PCI performance will also suck badly compared to others.
-You'll noticed the DC10+/DC30+ aren't mentioned anywhere in the overview.
-Basically, you can assume that if the Buz works, the LML33 will work too. If
-the LML33 works, the DC10+/DC30+ will work too. They're most tolerant to
-different mainboard chipsets from all of the supported cards.
-
-If you experience timeouts during capture, buy a better mainboard or lower
-the quality/buffersize during capture (see 'Concerning buffer sizes, quality,
-output size etc.'). If it hangs, there's little we can do as of now. Check
-your IRQs and make sure the card has its own interrupts.
-
-Programming interface
----------------------
-
-This driver conforms to video4linux2. Support for V4L1 and for the custom
-zoran ioctls has been removed in kernel 2.6.38.
-
-For programming example, please, look at lavrec.c and lavplay.c code in
-the MJPEG-tools (http://mjpeg.sf.net/).
-
-Additional notes for software developers:
-
- The driver returns maxwidth and maxheight parameters according to
- the current TV standard (norm). Therefore, the software which
- communicates with the driver and "asks" for these parameters should
- first set the correct norm. Well, it seems logically correct: TV
- standard is "more constant" for current country than geometry
- settings of a variety of TV capture cards which may work in ITU or
- square pixel format.
-
-Applications
-------------
-
-Applications known to work with this driver:
-
-TV viewing:
-
-* xawtv
-* kwintv
-* probably any TV application that supports video4linux or video4linux2.
-
-MJPEG capture/playback:
-
-* mjpegtools/lavtools (or Linux Video Studio)
-* gstreamer
-* mplayer
-
-General raw capture:
-
-* xawtv
-* gstreamer
-* probably any application that supports video4linux or video4linux2
-
-Video editing:
-
-* Cinelerra
-* MainActor
-* mjpegtools (or Linux Video Studio)
-
-
-Concerning buffer sizes, quality, output size etc.
---------------------------------------------------
-
-
-The zr36060 can do 1:2 JPEG compression. This is really the theoretical
-maximum that the chipset can reach. The driver can, however, limit compression
-to a maximum (size) of 1:4. The reason for this is that some cards (e.g. Buz)
-can't handle 1:2 compression without stopping capture after only a few minutes.
-With 1:4, it'll mostly work. If you have a Buz, use 'low_bitrate=1' to go into
-1:4 max. compression mode.
-
-100% JPEG quality is thus 1:2 compression in practice. So for a full PAL frame
-(size 720x576). The JPEG fields are stored in YUY2 format, so the size of the
-fields are 720x288x16/2 bits/field (2 fields/frame) = 207360 bytes/field x 2 =
-414720 bytes/frame (add some more bytes for headers and DHT (huffman)/DQT
-(quantization) tables, and you'll get to something like 512kB per frame for
-1:2 compression. For 1:4 compression, you'd have frames of half this size.
-
-Some additional explanation by Martin Samuelsson, which also explains the
-importance of buffer sizes:
---
-> Hmm, I do not think it is really that way. With the current (downloaded
-> at 18:00 Monday) driver I get that output sizes for 10 sec:
-> -q 50 -b 128 : 24.283.332 Bytes
-> -q 50 -b 256 : 48.442.368
-> -q 25 -b 128 : 24.655.992
-> -q 25 -b 256 : 25.859.820
-
-I woke up, and can't go to sleep again. I'll kill some time explaining why
-this doesn't look strange to me.
-
-Let's do some math using a width of 704 pixels. I'm not sure whether the Buz
-actually use that number or not, but that's not too important right now.
-
-704x288 pixels, one field, is 202752 pixels. Divided by 64 pixels per block;
-3168 blocks per field. Each pixel consist of two bytes; 128 bytes per block;
-1024 bits per block. 100% in the new driver mean 1:2 compression; the maximum
-output becomes 512 bits per block. Actually 510, but 512 is simpler to use
-for calculations.
-
-Let's say that we specify d1q50. We thus want 256 bits per block; times 3168
-becomes 811008 bits; 101376 bytes per field. We're talking raw bits and bytes
-here, so we don't need to do any fancy corrections for bits-per-pixel or such
-things. 101376 bytes per field.
-
-d1 video contains two fields per frame. Those sum up to 202752 bytes per
-frame, and one of those frames goes into each buffer.
-
-But wait a second! -b128 gives 128kB buffers! It's not possible to cram
-202752 bytes of JPEG data into 128kB!
-
-This is what the driver notice and automatically compensate for in your
-examples. Let's do some math using this information:
-
-128kB is 131072 bytes. In this buffer, we want to store two fields, which
-leaves 65536 bytes for each field. Using 3168 blocks per field, we get
-20.68686868... available bytes per block; 165 bits. We can't allow the
-request for 256 bits per block when there's only 165 bits available! The -q50
-option is silently overridden, and the -b128 option takes precedence, leaving
-us with the equivalence of -q32.
-
-This gives us a data rate of 165 bits per block, which, times 3168, sums up
-to 65340 bytes per field, out of the allowed 65536. The current driver has
-another level of rate limiting; it won't accept -q values that fill more than
-6/8 of the specified buffers. (I'm not sure why. "Playing it safe" seem to be
-a safe bet. Personally, I think I would have lowered requested-bits-per-block
-by one, or something like that.) We can't use 165 bits per block, but have to
-lower it again, to 6/8 of the available buffer space: We end up with 124 bits
-per block, the equivalence of -q24. With 128kB buffers, you can't use greater
-than -q24 at -d1. (And PAL, and 704 pixels width...)
-
-The third example is limited to -q24 through the same process. The second
-example, using very similar calculations, is limited to -q48. The only
-example that actually grab at the specified -q value is the last one, which
-is clearly visible, looking at the file size.
---
-
-Conclusion: the quality of the resulting movie depends on buffer size, quality,
-whether or not you use 'low_bitrate=1' as insmod option for the zr36060.c
-module to do 1:4 instead of 1:2 compression, etc.
-
-If you experience timeouts, lowering the quality/buffersize or using
-'low_bitrate=1 as insmod option for zr36060.o might actually help, as is
-proven by the Buz.
-
-It hangs/crashes/fails/whatevers! Help!
----------------------------------------
-
-Make sure that the card has its own interrupts (see /proc/interrupts), check
-the output of dmesg at high verbosity (load zr36067.o with debug=2,
-load all other modules with debug=1). Check that your mainboard is favorable
-(see question 2) and if not, test the card in another computer. Also see the
-notes given in question 3 and try lowering quality/buffersize/capturesize
-if recording fails after a period of time.
-
-If all this doesn't help, give a clear description of the problem including
-detailed hardware information (memory+brand, mainboard+chipset+brand, which
-MJPEG card, processor, other PCI cards that might be of interest), give the
-system PnP information (/proc/interrupts, /proc/dma, /proc/devices), and give
-the kernel version, driver version, glibc version, gcc version and any other
-information that might possibly be of interest. Also provide the dmesg output
-at high verbosity. See 'Contacting' on how to contact the developers.
-
-Maintainers/Contacting
-----------------------
-
-The driver is currently maintained by Laurent Pinchart and Ronald Bultje
-(<laurent.pinchart@skynet.be> and <rbultje@ronald.bitfreak.net>). For bug
-reports or questions, please contact the mailinglist instead of the developers
-individually. For user questions (i.e. bug reports or how-to questions), send
-an email to <mjpeg-users@lists.sf.net>, for developers (i.e. if you want to
-help programming), send an email to <mjpeg-developer@lists.sf.net>. See
-http://www.sf.net/projects/mjpeg/ for subscription information.
-
-For bug reports, be sure to include all the information as described in
-the section 'It hangs/crashes/fails/whatevers! Help!'. Please make sure
-you're using the latest version (http://mjpeg.sf.net/driver-zoran/).
-
-Previous maintainers/developers of this driver include Serguei Miridonov
-<mirsev@cicese.mx>, Wolfgang Scherr <scherr@net4you.net>, Dave Perks
-<dperks@ibm.net> and Rainer Johanni <Rainer@Johanni.de>.
-
-Driver's License
-----------------
-
- This driver is distributed under the terms of the General Public License.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
-See http://www.gnu.org/ for more information.
source "drivers/staging/media/tegra-vde/Kconfig"
-source "drivers/staging/media/zoran/Kconfig"
-
source "drivers/staging/media/ipu3/Kconfig"
source "drivers/staging/media/soc_camera/Kconfig"
obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/
obj-$(CONFIG_VIDEO_SUNXI) += sunxi/
obj-$(CONFIG_TEGRA_VDE) += tegra-vde/
-obj-$(CONFIG_VIDEO_ZORAN) += zoran/
obj-$(CONFIG_VIDEO_ROCKCHIP_VPU) += rockchip/vpu/
obj-$(CONFIG_VIDEO_IPU3_IMGU) += ipu3/
obj-$(CONFIG_SOC_CAMERA) += soc_camera/
+++ /dev/null
-config VIDEO_ZORAN
- tristate "Zoran ZR36057/36067 Video For Linux (Deprecated)"
- depends on PCI && I2C_ALGOBIT && VIDEO_V4L2 && VIRT_TO_BUS
- depends on !ALPHA
- help
- Say Y for support for MJPEG capture cards based on the Zoran
- 36057/36067 PCI controller chipset. This includes the Iomega
- Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is
- a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For
- more information, check <file:Documentation/media/v4l-drivers/zoran.rst>.
-
- To compile this driver as a module, choose M here: the
- module will be called zr36067.
-
-config VIDEO_ZORAN_DC30
- tristate "Pinnacle/Miro DC30(+) support"
- depends on VIDEO_ZORAN
- select VIDEO_ADV7175 if MEDIA_SUBDRV_AUTOSELECT
- select VIDEO_VPX3220 if MEDIA_SUBDRV_AUTOSELECT
- help
- Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
- card. This also supports really old DC10 cards based on the
- zr36050 MJPEG codec and zr36016 VFE.
-
-config VIDEO_ZORAN_ZR36060
- tristate "Zoran ZR36060"
- depends on VIDEO_ZORAN
- help
- Say Y to support Zoran boards based on 36060 chips.
- This includes Iomega Buz, Pinnacle DC10, Linux media Labs 33
- and 33 R10 and AverMedia 6 boards.
-
-config VIDEO_ZORAN_BUZ
- tristate "Iomega Buz support"
- depends on VIDEO_ZORAN_ZR36060
- select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
- select VIDEO_SAA7185 if MEDIA_SUBDRV_AUTOSELECT
- help
- Support for the Iomega Buz MJPEG capture/playback card.
-
-config VIDEO_ZORAN_DC10
- tristate "Pinnacle/Miro DC10(+) support"
- depends on VIDEO_ZORAN_ZR36060
- select VIDEO_SAA7110 if MEDIA_SUBDRV_AUTOSELECT
- select VIDEO_ADV7175 if MEDIA_SUBDRV_AUTOSELECT
- help
- Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback
- card.
-
-config VIDEO_ZORAN_LML33
- tristate "Linux Media Labs LML33 support"
- depends on VIDEO_ZORAN_ZR36060
- select VIDEO_BT819 if MEDIA_SUBDRV_AUTOSELECT
- select VIDEO_BT856 if MEDIA_SUBDRV_AUTOSELECT
- help
- Support for the Linux Media Labs LML33 MJPEG capture/playback
- card.
-
-config VIDEO_ZORAN_LML33R10
- tristate "Linux Media Labs LML33R10 support"
- depends on VIDEO_ZORAN_ZR36060
- select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
- select VIDEO_ADV7170 if MEDIA_SUBDRV_AUTOSELECT
- help
- support for the Linux Media Labs LML33R10 MJPEG capture/playback
- card.
-
-config VIDEO_ZORAN_AVS6EYES
- tristate "AverMedia 6 Eyes support"
- depends on VIDEO_ZORAN_ZR36060
- select VIDEO_BT856 if MEDIA_SUBDRV_AUTOSELECT
- select VIDEO_BT866 if MEDIA_SUBDRV_AUTOSELECT
- select VIDEO_KS0127 if MEDIA_SUBDRV_AUTOSELECT
- help
- Support for the AverMedia 6 Eyes video surveillance card.
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-zr36067-objs := zoran_procfs.o zoran_device.o \
- zoran_driver.o zoran_card.o
-
-obj-$(CONFIG_VIDEO_ZORAN) += zr36067.o videocodec.o
-obj-$(CONFIG_VIDEO_ZORAN_DC30) += zr36050.o zr36016.o
-obj-$(CONFIG_VIDEO_ZORAN_ZR36060) += zr36060.o
+++ /dev/null
-The zoran driver is marked deprecated. It will be removed
-around May 2019 unless someone is willing to update this
-driver to the latest V4L2 frameworks (especially the vb2
-framework).
+++ /dev/null
-/*
- * VIDEO MOTION CODECs internal API for video devices
- *
- * Interface for MJPEG (and maybe later MPEG/WAVELETS) codec's
- * bound to a master device.
- *
- * (c) 2002 Wolfgang Scherr <scherr@net4you.at>
- *
- * $Id: videocodec.c,v 1.1.2.8 2003/03/29 07:16:04 rbultje Exp $
- *
- * ------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * ------------------------------------------------------------------------
- */
-
-#define VIDEOCODEC_VERSION "v0.2"
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-
-// kernel config is here (procfs flag)
-
-#ifdef CONFIG_PROC_FS
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/uaccess.h>
-#endif
-
-#include "videocodec.h"
-
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-4)");
-
-#define dprintk(num, format, args...) \
- do { \
- if (debug >= num) \
- printk(format, ##args); \
- } while (0)
-
-struct attached_list {
- struct videocodec *codec;
- struct attached_list *next;
-};
-
-struct codec_list {
- const struct videocodec *codec;
- int attached;
- struct attached_list *list;
- struct codec_list *next;
-};
-
-static struct codec_list *codeclist_top;
-
-/* ================================================= */
-/* function prototypes of the master/slave interface */
-/* ================================================= */
-
-struct videocodec *
-videocodec_attach (struct videocodec_master *master)
-{
- struct codec_list *h = codeclist_top;
- struct attached_list *a, *ptr;
- struct videocodec *codec;
- int res;
-
- if (!master) {
- dprintk(1, KERN_ERR "videocodec_attach: no data\n");
- return NULL;
- }
-
- dprintk(2,
- "videocodec_attach: '%s', flags %lx, magic %lx\n",
- master->name, master->flags, master->magic);
-
- if (!h) {
- dprintk(1,
- KERN_ERR
- "videocodec_attach: no device available\n");
- return NULL;
- }
-
- while (h) {
- // attach only if the slave has at least the flags
- // expected by the master
- if ((master->flags & h->codec->flags) == master->flags) {
- dprintk(4, "videocodec_attach: try '%s'\n",
- h->codec->name);
-
- if (!try_module_get(h->codec->owner))
- return NULL;
-
- codec = kmemdup(h->codec, sizeof(struct videocodec),
- GFP_KERNEL);
- if (!codec) {
- dprintk(1,
- KERN_ERR
- "videocodec_attach: no mem\n");
- goto out_module_put;
- }
-
- res = strlen(codec->name);
- snprintf(codec->name + res, sizeof(codec->name) - res,
- "[%d]", h->attached);
- codec->master_data = master;
- res = codec->setup(codec);
- if (res == 0) {
- dprintk(3, "videocodec_attach '%s'\n",
- codec->name);
- ptr = kzalloc(sizeof(struct attached_list), GFP_KERNEL);
- if (!ptr) {
- dprintk(1,
- KERN_ERR
- "videocodec_attach: no memory\n");
- goto out_kfree;
- }
- ptr->codec = codec;
-
- a = h->list;
- if (!a) {
- h->list = ptr;
- dprintk(4,
- "videocodec: first element\n");
- } else {
- while (a->next)
- a = a->next; // find end
- a->next = ptr;
- dprintk(4,
- "videocodec: in after '%s'\n",
- h->codec->name);
- }
-
- h->attached += 1;
- return codec;
- } else {
- kfree(codec);
- }
- }
- h = h->next;
- }
-
- dprintk(1, KERN_ERR "videocodec_attach: no codec found!\n");
- return NULL;
-
- out_module_put:
- module_put(h->codec->owner);
- out_kfree:
- kfree(codec);
- return NULL;
-}
-
-int
-videocodec_detach (struct videocodec *codec)
-{
- struct codec_list *h = codeclist_top;
- struct attached_list *a, *prev;
- int res;
-
- if (!codec) {
- dprintk(1, KERN_ERR "videocodec_detach: no data\n");
- return -EINVAL;
- }
-
- dprintk(2,
- "videocodec_detach: '%s', type: %x, flags %lx, magic %lx\n",
- codec->name, codec->type, codec->flags, codec->magic);
-
- if (!h) {
- dprintk(1,
- KERN_ERR "videocodec_detach: no device left...\n");
- return -ENXIO;
- }
-
- while (h) {
- a = h->list;
- prev = NULL;
- while (a) {
- if (codec == a->codec) {
- res = a->codec->unset(a->codec);
- if (res >= 0) {
- dprintk(3,
- "videocodec_detach: '%s'\n",
- a->codec->name);
- a->codec->master_data = NULL;
- } else {
- dprintk(1,
- KERN_ERR
- "videocodec_detach: '%s'\n",
- a->codec->name);
- a->codec->master_data = NULL;
- }
- if (prev == NULL) {
- h->list = a->next;
- dprintk(4,
- "videocodec: delete first\n");
- } else {
- prev->next = a->next;
- dprintk(4,
- "videocodec: delete middle\n");
- }
- module_put(a->codec->owner);
- kfree(a->codec);
- kfree(a);
- h->attached -= 1;
- return 0;
- }
- prev = a;
- a = a->next;
- }
- h = h->next;
- }
-
- dprintk(1, KERN_ERR "videocodec_detach: given codec not found!\n");
- return -EINVAL;
-}
-
-int
-videocodec_register (const struct videocodec *codec)
-{
- struct codec_list *ptr, *h = codeclist_top;
-
- if (!codec) {
- dprintk(1, KERN_ERR "videocodec_register: no data!\n");
- return -EINVAL;
- }
-
- dprintk(2,
- "videocodec: register '%s', type: %x, flags %lx, magic %lx\n",
- codec->name, codec->type, codec->flags, codec->magic);
-
- ptr = kzalloc(sizeof(struct codec_list), GFP_KERNEL);
- if (!ptr) {
- dprintk(1, KERN_ERR "videocodec_register: no memory\n");
- return -ENOMEM;
- }
- ptr->codec = codec;
-
- if (!h) {
- codeclist_top = ptr;
- dprintk(4, "videocodec: hooked in as first element\n");
- } else {
- while (h->next)
- h = h->next; // find the end
- h->next = ptr;
- dprintk(4, "videocodec: hooked in after '%s'\n",
- h->codec->name);
- }
-
- return 0;
-}
-
-int
-videocodec_unregister (const struct videocodec *codec)
-{
- struct codec_list *prev = NULL, *h = codeclist_top;
-
- if (!codec) {
- dprintk(1, KERN_ERR "videocodec_unregister: no data!\n");
- return -EINVAL;
- }
-
- dprintk(2,
- "videocodec: unregister '%s', type: %x, flags %lx, magic %lx\n",
- codec->name, codec->type, codec->flags, codec->magic);
-
- if (!h) {
- dprintk(1,
- KERN_ERR
- "videocodec_unregister: no device left...\n");
- return -ENXIO;
- }
-
- while (h) {
- if (codec == h->codec) {
- if (h->attached) {
- dprintk(1,
- KERN_ERR
- "videocodec: '%s' is used\n",
- h->codec->name);
- return -EBUSY;
- }
- dprintk(3, "videocodec: unregister '%s' is ok.\n",
- h->codec->name);
- if (prev == NULL) {
- codeclist_top = h->next;
- dprintk(4,
- "videocodec: delete first element\n");
- } else {
- prev->next = h->next;
- dprintk(4,
- "videocodec: delete middle element\n");
- }
- kfree(h);
- return 0;
- }
- prev = h;
- h = h->next;
- }
-
- dprintk(1,
- KERN_ERR
- "videocodec_unregister: given codec not found!\n");
- return -EINVAL;
-}
-
-#ifdef CONFIG_PROC_FS
-static int proc_videocodecs_show(struct seq_file *m, void *v)
-{
- struct codec_list *h = codeclist_top;
- struct attached_list *a;
-
- seq_printf(m, "<S>lave or attached <M>aster name type flags magic ");
- seq_printf(m, "(connected as)\n");
-
- while (h) {
- seq_printf(m, "S %32s %04x %08lx %08lx (TEMPLATE)\n",
- h->codec->name, h->codec->type,
- h->codec->flags, h->codec->magic);
- a = h->list;
- while (a) {
- seq_printf(m, "M %32s %04x %08lx %08lx (%s)\n",
- a->codec->master_data->name,
- a->codec->master_data->type,
- a->codec->master_data->flags,
- a->codec->master_data->magic,
- a->codec->name);
- a = a->next;
- }
- h = h->next;
- }
-
- return 0;
-}
-#endif
-
-/* ===================== */
-/* hook in driver module */
-/* ===================== */
-static int __init
-videocodec_init (void)
-{
-#ifdef CONFIG_PROC_FS
- static struct proc_dir_entry *videocodec_proc_entry;
-#endif
-
- printk(KERN_INFO "Linux video codec intermediate layer: %s\n",
- VIDEOCODEC_VERSION);
-
-#ifdef CONFIG_PROC_FS
- videocodec_proc_entry = proc_create_single("videocodecs", 0, NULL,
- proc_videocodecs_show);
- if (!videocodec_proc_entry) {
- dprintk(1, KERN_ERR "videocodec: can't init procfs.\n");
- }
-#endif
- return 0;
-}
-
-static void __exit
-videocodec_exit (void)
-{
-#ifdef CONFIG_PROC_FS
- remove_proc_entry("videocodecs", NULL);
-#endif
-}
-
-EXPORT_SYMBOL(videocodec_attach);
-EXPORT_SYMBOL(videocodec_detach);
-EXPORT_SYMBOL(videocodec_register);
-EXPORT_SYMBOL(videocodec_unregister);
-
-module_init(videocodec_init);
-module_exit(videocodec_exit);
-
-MODULE_AUTHOR("Wolfgang Scherr <scherr@net4you.at>");
-MODULE_DESCRIPTION("Intermediate API module for video codecs "
- VIDEOCODEC_VERSION);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * VIDEO MOTION CODECs internal API for video devices
- *
- * Interface for MJPEG (and maybe later MPEG/WAVELETS) codec's
- * bound to a master device.
- *
- * (c) 2002 Wolfgang Scherr <scherr@net4you.at>
- *
- * $Id: videocodec.h,v 1.1.2.4 2003/01/14 21:15:03 rbultje Exp $
- *
- * ------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * ------------------------------------------------------------------------
- */
-
-/* =================== */
-/* general description */
-/* =================== */
-
-/* Should ease the (re-)usage of drivers supporting cards with (different)
- video codecs. The codecs register to this module their functionality,
- and the processors (masters) can attach to them if they fit.
-
- The codecs are typically have a "strong" binding to their master - so I
- don't think it makes sense to have a full blown interfacing as with e.g.
- i2c. If you have an other opinion, let's discuss & implement it :-)))
-
- Usage:
-
- The slave has just to setup the videocodec structure and use two functions:
- videocodec_register(codecdata);
- videocodec_unregister(codecdata);
- The best is just calling them at module (de-)initialisation.
-
- The master sets up the structure videocodec_master and calls:
- codecdata=videocodec_attach(master_codecdata);
- videocodec_detach(codecdata);
-
- The slave is called during attach/detach via functions setup previously
- during register. At that time, the master_data pointer is set up
- and the slave can access any io registers of the master device (in the case
- the slave is bound to it). Otherwise it doesn't need this functions and
- therfor they may not be initialized.
-
- The other functions are just for convenience, as they are for sure used by
- most/all of the codecs. The last ones may be omitted, too.
-
- See the structure declaration below for more information and which data has
- to be set up for the master and the slave.
-
- ----------------------------------------------------------------------------
- The master should have "knowledge" of the slave and vice versa. So the data
- structures sent to/from slave via set_data/get_data set_image/get_image are
- device dependent and vary between MJPEG/MPEG/WAVELET/... devices. (!!!!)
- ----------------------------------------------------------------------------
-*/
-\f
-
-/* ========================================== */
-/* description of the videocodec_io structure */
-/* ========================================== */
-
-/*
- ==== master setup ====
- name -> name of the device structure for reference and debugging
- master_data -> data ref. for the master (e.g. the zr36055,57,67)
- readreg -> ref. to read-fn from register (setup by master, used by slave)
- writereg -> ref. to write-fn to register (setup by master, used by slave)
- this two functions do the lowlevel I/O job
-
- ==== slave functionality setup ====
- slave_data -> data ref. for the slave (e.g. the zr36050,60)
- check -> fn-ref. checks availability of an device, returns -EIO on failure or
- the type on success
- this makes espcecially sense if a driver module supports more than
- one codec which may be quite similar to access, nevertheless it
- is good for a first functionality check
-
- -- main functions you always need for compression/decompression --
-
- set_mode -> this fn-ref. resets the entire codec, and sets up the mode
- with the last defined norm/size (or device default if not
- available) - it returns 0 if the mode is possible
- set_size -> this fn-ref. sets the norm and image size for
- compression/decompression (returns 0 on success)
- the norm param is defined in videodev2.h (V4L2_STD_*)
-
- additional setup may be available, too - but the codec should work with
- some default values even without this
-
- set_data -> sets device-specific data (tables, quality etc.)
- get_data -> query device-specific data (tables, quality etc.)
-
- if the device delivers interrupts, they may be setup/handled here
- setup_interrupt -> codec irq setup (not needed for 36050/60)
- handle_interrupt -> codec irq handling (not needed for 36050/60)
-
- if the device delivers pictures, they may be handled here
- put_image -> puts image data to the codec (not needed for 36050/60)
- get_image -> gets image data from the codec (not needed for 36050/60)
- the calls include frame numbers and flags (even/odd/...)
- if needed and a flag which allows blocking until its ready
-*/
-\f
-/* ============== */
-/* user interface */
-/* ============== */
-
-/*
- Currently there is only a information display planned, as the layer
- is not visible for the user space at all.
-
- Information is available via procfs. The current entry is "/proc/videocodecs"
- but it makes sense to "hide" it in the /proc/video tree of v4l(2) --TODO--.
-
-A example for such an output is:
-
-<S>lave or attached <M>aster name type flags magic (connected as)
-S zr36050 0002 0000d001 00000000 (TEMPLATE)
-M zr36055[0] 0001 0000c001 00000000 (zr36050[0])
-M zr36055[1] 0001 0000c001 00000000 (zr36050[1])
-
-*/
-\f
-
-/* =============================================== */
-/* special defines for the videocodec_io structure */
-/* =============================================== */
-
-#ifndef __LINUX_VIDEOCODEC_H
-#define __LINUX_VIDEOCODEC_H
-
-#include <linux/videodev2.h>
-
-#define CODEC_DO_COMPRESSION 0
-#define CODEC_DO_EXPANSION 1
-
-/* this are the current codec flags I think they are needed */
-/* -> type value in structure */
-#define CODEC_FLAG_JPEG 0x00000001L // JPEG codec
-#define CODEC_FLAG_MPEG 0x00000002L // MPEG1/2/4 codec
-#define CODEC_FLAG_DIVX 0x00000004L // DIVX codec
-#define CODEC_FLAG_WAVELET 0x00000008L // WAVELET codec
- // room for other types
-
-#define CODEC_FLAG_MAGIC 0x00000800L // magic key must match
-#define CODEC_FLAG_HARDWARE 0x00001000L // is a hardware codec
-#define CODEC_FLAG_VFE 0x00002000L // has direct video frontend
-#define CODEC_FLAG_ENCODER 0x00004000L // compression capability
-#define CODEC_FLAG_DECODER 0x00008000L // decompression capability
-#define CODEC_FLAG_NEEDIRQ 0x00010000L // needs irq handling
-#define CODEC_FLAG_RDWRPIC 0x00020000L // handles picture I/O
-
-/* a list of modes, some are just examples (is there any HW?) */
-#define CODEC_MODE_BJPG 0x0001 // Baseline JPEG
-#define CODEC_MODE_LJPG 0x0002 // Lossless JPEG
-#define CODEC_MODE_MPEG1 0x0003 // MPEG 1
-#define CODEC_MODE_MPEG2 0x0004 // MPEG 2
-#define CODEC_MODE_MPEG4 0x0005 // MPEG 4
-#define CODEC_MODE_MSDIVX 0x0006 // MS DivX
-#define CODEC_MODE_ODIVX 0x0007 // Open DivX
-#define CODEC_MODE_WAVELET 0x0008 // Wavelet
-
-/* this are the current codec types I want to implement */
-/* -> type value in structure */
-#define CODEC_TYPE_NONE 0
-#define CODEC_TYPE_L64702 1
-#define CODEC_TYPE_ZR36050 2
-#define CODEC_TYPE_ZR36016 3
-#define CODEC_TYPE_ZR36060 4
-
-/* the type of data may be enhanced by future implementations (data-fn.'s) */
-/* -> used in command */
-#define CODEC_G_STATUS 0x0000 /* codec status (query only) */
-#define CODEC_S_CODEC_MODE 0x0001 /* codec mode (baseline JPEG, MPEG1,... */
-#define CODEC_G_CODEC_MODE 0x8001
-#define CODEC_S_VFE 0x0002 /* additional video frontend setup */
-#define CODEC_G_VFE 0x8002
-#define CODEC_S_MMAP 0x0003 /* MMAP setup (if available) */
-
-#define CODEC_S_JPEG_TDS_BYTE 0x0010 /* target data size in bytes */
-#define CODEC_G_JPEG_TDS_BYTE 0x8010
-#define CODEC_S_JPEG_SCALE 0x0011 /* scaling factor for quant. tables */
-#define CODEC_G_JPEG_SCALE 0x8011
-#define CODEC_S_JPEG_HDT_DATA 0x0018 /* huffman-tables */
-#define CODEC_G_JPEG_HDT_DATA 0x8018
-#define CODEC_S_JPEG_QDT_DATA 0x0019 /* quantizing-tables */
-#define CODEC_G_JPEG_QDT_DATA 0x8019
-#define CODEC_S_JPEG_APP_DATA 0x001A /* APP marker */
-#define CODEC_G_JPEG_APP_DATA 0x801A
-#define CODEC_S_JPEG_COM_DATA 0x001B /* COM marker */
-#define CODEC_G_JPEG_COM_DATA 0x801B
-
-#define CODEC_S_PRIVATE 0x1000 /* "private" commands start here */
-#define CODEC_G_PRIVATE 0x9000
-
-#define CODEC_G_FLAG 0x8000 /* this is how 'get' is detected */
-
-/* types of transfer, directly user space or a kernel buffer (image-fn.'s) */
-/* -> used in get_image, put_image */
-#define CODEC_TRANSFER_KERNEL 0 /* use "memcopy" */
-#define CODEC_TRANSFER_USER 1 /* use "to/from_user" */
-\f
-
-/* ========================= */
-/* the structures itself ... */
-/* ========================= */
-
-struct vfe_polarity {
- unsigned int vsync_pol:1;
- unsigned int hsync_pol:1;
- unsigned int field_pol:1;
- unsigned int blank_pol:1;
- unsigned int subimg_pol:1;
- unsigned int poe_pol:1;
- unsigned int pvalid_pol:1;
- unsigned int vclk_pol:1;
-};
-
-struct vfe_settings {
- __u32 x, y; /* Offsets into image */
- __u32 width, height; /* Area to capture */
- __u16 decimation; /* Decimation divider */
- __u16 flags; /* Flags for capture */
- __u16 quality; /* quality of the video */
-};
-
-struct tvnorm {
- u16 Wt, Wa, HStart, HSyncStart, Ht, Ha, VStart;
-};
-
-struct jpeg_com_marker {
- int len; /* number of usable bytes in data */
- char data[60];
-};
-
-struct jpeg_app_marker {
- int appn; /* number app segment */
- int len; /* number of usable bytes in data */
- char data[60];
-};
-
-struct videocodec {
- struct module *owner;
- /* -- filled in by slave device during register -- */
- char name[32];
- unsigned long magic; /* may be used for client<->master attaching */
- unsigned long flags; /* functionality flags */
- unsigned int type; /* codec type */
-
- /* -- these is filled in later during master device attach -- */
-
- struct videocodec_master *master_data;
-
- /* -- these are filled in by the slave device during register -- */
-
- void *data; /* private slave data */
-
- /* attach/detach client functions (indirect call) */
- int (*setup) (struct videocodec * codec);
- int (*unset) (struct videocodec * codec);
-
- /* main functions, every client needs them for sure! */
- // set compression or decompression (or freeze, stop, standby, etc)
- int (*set_mode) (struct videocodec * codec,
- int mode);
- // setup picture size and norm (for the codec's video frontend)
- int (*set_video) (struct videocodec * codec,
- struct tvnorm * norm,
- struct vfe_settings * cap,
- struct vfe_polarity * pol);
- // other control commands, also mmap setup etc.
- int (*control) (struct videocodec * codec,
- int type,
- int size,
- void *data);
-
- /* additional setup/query/processing (may be NULL pointer) */
- // interrupt setup / handling (for irq's delivered by master)
- int (*setup_interrupt) (struct videocodec * codec,
- long mode);
- int (*handle_interrupt) (struct videocodec * codec,
- int source,
- long flag);
- // picture interface (if any)
- long (*put_image) (struct videocodec * codec,
- int tr_type,
- int block,
- long *fr_num,
- long *flag,
- long size,
- void *buf);
- long (*get_image) (struct videocodec * codec,
- int tr_type,
- int block,
- long *fr_num,
- long *flag,
- long size,
- void *buf);
-};
-
-struct videocodec_master {
- /* -- filled in by master device for registration -- */
- char name[32];
- unsigned long magic; /* may be used for client<->master attaching */
- unsigned long flags; /* functionality flags */
- unsigned int type; /* master type */
-
- void *data; /* private master data */
-
- __u32(*readreg) (struct videocodec * codec,
- __u16 reg);
- void (*writereg) (struct videocodec * codec,
- __u16 reg,
- __u32 value);
-};
-\f
-
-/* ================================================= */
-/* function prototypes of the master/slave interface */
-/* ================================================= */
-
-/* attach and detach commands for the master */
-// * master structure needs to be kmalloc'ed before calling attach
-// and free'd after calling detach
-// * returns pointer on success, NULL on failure
-extern struct videocodec *videocodec_attach(struct videocodec_master *);
-// * 0 on success, <0 (errno) on failure
-extern int videocodec_detach(struct videocodec *);
-
-/* register and unregister commands for the slaves */
-// * 0 on success, <0 (errno) on failure
-extern int videocodec_register(const struct videocodec *);
-// * 0 on success, <0 (errno) on failure
-extern int videocodec_unregister(const struct videocodec *);
-
-/* the other calls are directly done via the videocodec structure! */
-
-#endif /*ifndef __LINUX_VIDEOCODEC_H */
+++ /dev/null
-/*
- * zoran - Iomega Buz driver
- *
- * Copyright (C) 1999 Rainer Johanni <Rainer@Johanni.de>
- *
- * based on
- *
- * zoran.0.0.3 Copyright (C) 1998 Dave Perks <dperks@ibm.net>
- *
- * and
- *
- * bttv - Bt848 frame grabber driver
- * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
- * & Marcus Metzler (mocm@thp.uni-koeln.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BUZ_H_
-#define _BUZ_H_
-
-#include <media/v4l2-device.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-fh.h>
-
-struct zoran_sync {
- unsigned long frame; /* number of buffer that has been free'd */
- unsigned long length; /* number of code bytes in buffer (capture only) */
- unsigned long seq; /* frame sequence number */
- u64 ts; /* timestamp */
-};
-
-
-#define ZORAN_NAME "ZORAN" /* name of the device */
-
-#define ZR_DEVNAME(zr) ((zr)->name)
-
-#define BUZ_MAX_WIDTH (zr->timing->Wa)
-#define BUZ_MAX_HEIGHT (zr->timing->Ha)
-#define BUZ_MIN_WIDTH 32 /* never display less than 32 pixels */
-#define BUZ_MIN_HEIGHT 24 /* never display less than 24 rows */
-
-#define BUZ_NUM_STAT_COM 4
-#define BUZ_MASK_STAT_COM 3
-
-#define BUZ_MAX_FRAME 256 /* Must be a power of 2 */
-#define BUZ_MASK_FRAME 255 /* Must be BUZ_MAX_FRAME-1 */
-
-#define BUZ_MAX_INPUT 16
-
-#if VIDEO_MAX_FRAME <= 32
-# define V4L_MAX_FRAME 32
-#elif VIDEO_MAX_FRAME <= 64
-# define V4L_MAX_FRAME 64
-#else
-# error "Too many video frame buffers to handle"
-#endif
-#define V4L_MASK_FRAME (V4L_MAX_FRAME - 1)
-
-#define MAX_FRAME (BUZ_MAX_FRAME > VIDEO_MAX_FRAME ? BUZ_MAX_FRAME : VIDEO_MAX_FRAME)
-
-#include "zr36057.h"
-
-enum card_type {
- UNKNOWN = -1,
-
- /* Pinnacle/Miro */
- DC10_old, /* DC30 like */
- DC10_new, /* DC10plus like */
- DC10plus,
- DC30,
- DC30plus,
-
- /* Linux Media Labs */
- LML33,
- LML33R10,
-
- /* Iomega */
- BUZ,
-
- /* AverMedia */
- AVS6EYES,
-
- /* total number of cards */
- NUM_CARDS
-};
-
-enum zoran_codec_mode {
- BUZ_MODE_IDLE, /* nothing going on */
- BUZ_MODE_MOTION_COMPRESS, /* grabbing frames */
- BUZ_MODE_MOTION_DECOMPRESS, /* playing frames */
- BUZ_MODE_STILL_COMPRESS, /* still frame conversion */
- BUZ_MODE_STILL_DECOMPRESS /* still frame conversion */
-};
-
-enum zoran_buffer_state {
- BUZ_STATE_USER, /* buffer is owned by application */
- BUZ_STATE_PEND, /* buffer is queued in pend[] ready to feed to I/O */
- BUZ_STATE_DMA, /* buffer is queued in dma[] for I/O */
- BUZ_STATE_DONE /* buffer is ready to return to application */
-};
-
-enum zoran_map_mode {
- ZORAN_MAP_MODE_RAW,
- ZORAN_MAP_MODE_JPG_REC,
-#define ZORAN_MAP_MODE_JPG ZORAN_MAP_MODE_JPG_REC
- ZORAN_MAP_MODE_JPG_PLAY,
-};
-
-enum gpio_type {
- ZR_GPIO_JPEG_SLEEP = 0,
- ZR_GPIO_JPEG_RESET,
- ZR_GPIO_JPEG_FRAME,
- ZR_GPIO_VID_DIR,
- ZR_GPIO_VID_EN,
- ZR_GPIO_VID_RESET,
- ZR_GPIO_CLK_SEL1,
- ZR_GPIO_CLK_SEL2,
- ZR_GPIO_MAX,
-};
-
-enum gpcs_type {
- GPCS_JPEG_RESET = 0,
- GPCS_JPEG_START,
- GPCS_MAX,
-};
-
-struct zoran_format {
- char *name;
- __u32 fourcc;
- int colorspace;
- int depth;
- __u32 flags;
- __u32 vfespfr;
-};
-/* flags */
-#define ZORAN_FORMAT_COMPRESSED 1<<0
-#define ZORAN_FORMAT_OVERLAY 1<<1
-#define ZORAN_FORMAT_CAPTURE 1<<2
-#define ZORAN_FORMAT_PLAYBACK 1<<3
-
-/* overlay-settings */
-struct zoran_overlay_settings {
- int is_set;
- int x, y, width, height; /* position */
- int clipcount; /* position and number of clips */
- const struct zoran_format *format; /* overlay format */
-};
-
-/* v4l-capture settings */
-struct zoran_v4l_settings {
- int width, height, bytesperline; /* capture size */
- const struct zoran_format *format; /* capture format */
-};
-
-/* jpg-capture/-playback settings */
-struct zoran_jpg_settings {
- int decimation; /* this bit is used to set everything to default */
- int HorDcm, VerDcm, TmpDcm; /* capture decimation settings (TmpDcm=1 means both fields) */
- int field_per_buff, odd_even; /* field-settings (odd_even=1 (+TmpDcm=1) means top-field-first) */
- int img_x, img_y, img_width, img_height; /* crop settings (subframe capture) */
- struct v4l2_jpegcompression jpg_comp; /* JPEG-specific capture settings */
-};
-
-struct zoran_fh;
-
-struct zoran_mapping {
- struct zoran_fh *fh;
- atomic_t count;
-};
-
-struct zoran_buffer {
- struct zoran_mapping *map;
- enum zoran_buffer_state state; /* state: unused/pending/dma/done */
- struct zoran_sync bs; /* DONE: info to return to application */
- union {
- struct {
- __le32 *frag_tab; /* addresses of frag table */
- u32 frag_tab_bus; /* same value cached to save time in ISR */
- } jpg;
- struct {
- char *fbuffer; /* virtual address of frame buffer */
- unsigned long fbuffer_phys;/* physical address of frame buffer */
- unsigned long fbuffer_bus;/* bus address of frame buffer */
- } v4l;
- };
-};
-
-enum zoran_lock_activity {
- ZORAN_FREE, /* free for use */
- ZORAN_ACTIVE, /* active but unlocked */
- ZORAN_LOCKED, /* locked */
-};
-
-/* buffer collections */
-struct zoran_buffer_col {
- enum zoran_lock_activity active; /* feature currently in use? */
- unsigned int num_buffers, buffer_size;
- struct zoran_buffer buffer[MAX_FRAME]; /* buffers */
- u8 allocated; /* Flag if buffers are allocated */
- u8 need_contiguous; /* Flag if contiguous buffers are needed */
- /* only applies to jpg buffers, raw buffers are always contiguous */
-};
-
-struct zoran;
-
-/* zoran_fh contains per-open() settings */
-struct zoran_fh {
- struct v4l2_fh fh;
- struct zoran *zr;
-
- enum zoran_map_mode map_mode; /* Flag which bufferset will map by next mmap() */
-
- struct zoran_overlay_settings overlay_settings;
- u32 *overlay_mask; /* overlay mask */
- enum zoran_lock_activity overlay_active;/* feature currently in use? */
-
- struct zoran_buffer_col buffers; /* buffers' info */
-
- struct zoran_v4l_settings v4l_settings; /* structure with a lot of things to play with */
- struct zoran_jpg_settings jpg_settings; /* structure with a lot of things to play with */
-};
-
-struct card_info {
- enum card_type type;
- char name[32];
- const char *i2c_decoder; /* i2c decoder device */
- const unsigned short *addrs_decoder;
- const char *i2c_encoder; /* i2c encoder device */
- const unsigned short *addrs_encoder;
- u16 video_vfe, video_codec; /* videocodec types */
- u16 audio_chip; /* audio type */
-
- int inputs; /* number of video inputs */
- struct input {
- int muxsel;
- char name[32];
- } input[BUZ_MAX_INPUT];
-
- v4l2_std_id norms;
- struct tvnorm *tvn[3]; /* supported TV norms */
-
- u32 jpeg_int; /* JPEG interrupt */
- u32 vsync_int; /* VSYNC interrupt */
- s8 gpio[ZR_GPIO_MAX];
- u8 gpcs[GPCS_MAX];
-
- struct vfe_polarity vfe_pol;
- u8 gpio_pol[ZR_GPIO_MAX];
-
- /* is the /GWS line connected? */
- u8 gws_not_connected;
-
- /* avs6eyes mux setting */
- u8 input_mux;
-
- void (*init) (struct zoran * zr);
-};
-
-struct zoran {
- struct v4l2_device v4l2_dev;
- struct v4l2_ctrl_handler hdl;
- struct video_device *video_dev;
-
- struct i2c_adapter i2c_adapter; /* */
- struct i2c_algo_bit_data i2c_algo; /* */
- u32 i2cbr;
-
- struct v4l2_subdev *decoder; /* video decoder sub-device */
- struct v4l2_subdev *encoder; /* video encoder sub-device */
-
- struct videocodec *codec; /* video codec */
- struct videocodec *vfe; /* video front end */
-
- struct mutex lock; /* file ops serialize lock */
-
- u8 initialized; /* flag if zoran has been correctly initialized */
- int user; /* number of current users */
- struct card_info card;
- struct tvnorm *timing;
-
- unsigned short id; /* number of this device */
- char name[32]; /* name of this device */
- struct pci_dev *pci_dev; /* PCI device */
- unsigned char revision; /* revision of zr36057 */
- unsigned char __iomem *zr36057_mem;/* pointer to mapped IO memory */
-
- spinlock_t spinlock; /* Spinlock */
-
- /* Video for Linux parameters */
- int input; /* card's norm and input */
- v4l2_std_id norm;
-
- /* Current buffer params */
- void *vbuf_base;
- int vbuf_height, vbuf_width;
- int vbuf_depth;
- int vbuf_bytesperline;
-
- struct zoran_overlay_settings overlay_settings;
- u32 *overlay_mask; /* overlay mask */
- enum zoran_lock_activity overlay_active; /* feature currently in use? */
-
- wait_queue_head_t v4l_capq;
-
- int v4l_overlay_active; /* Overlay grab is activated */
- int v4l_memgrab_active; /* Memory grab is activated */
-
- int v4l_grab_frame; /* Frame number being currently grabbed */
-#define NO_GRAB_ACTIVE (-1)
- unsigned long v4l_grab_seq; /* Number of frames grabbed */
- struct zoran_v4l_settings v4l_settings; /* structure with a lot of things to play with */
-
- /* V4L grab queue of frames pending */
- unsigned long v4l_pend_head;
- unsigned long v4l_pend_tail;
- unsigned long v4l_sync_tail;
- int v4l_pend[V4L_MAX_FRAME];
- struct zoran_buffer_col v4l_buffers; /* V4L buffers' info */
-
- /* Buz MJPEG parameters */
- enum zoran_codec_mode codec_mode; /* status of codec */
- struct zoran_jpg_settings jpg_settings; /* structure with a lot of things to play with */
-
- wait_queue_head_t jpg_capq; /* wait here for grab to finish */
-
- /* grab queue counts/indices, mask with BUZ_MASK_STAT_COM before using as index */
- /* (dma_head - dma_tail) is number active in DMA, must be <= BUZ_NUM_STAT_COM */
- /* (value & BUZ_MASK_STAT_COM) corresponds to index in stat_com table */
- unsigned long jpg_que_head; /* Index where to put next buffer which is queued */
- unsigned long jpg_dma_head; /* Index of next buffer which goes into stat_com */
- unsigned long jpg_dma_tail; /* Index of last buffer in stat_com */
- unsigned long jpg_que_tail; /* Index of last buffer in queue */
- unsigned long jpg_seq_num; /* count of frames since grab/play started */
- unsigned long jpg_err_seq; /* last seq_num before error */
- unsigned long jpg_err_shift;
- unsigned long jpg_queued_num; /* count of frames queued since grab/play started */
-
- /* zr36057's code buffer table */
- __le32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */
-
- /* (value & BUZ_MASK_FRAME) corresponds to index in pend[] queue */
- int jpg_pend[BUZ_MAX_FRAME];
-
- /* array indexed by frame number */
- struct zoran_buffer_col jpg_buffers; /* MJPEG buffers' info */
-
- /* Additional stuff for testing */
-#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *zoran_proc;
-#else
- void *zoran_proc;
-#endif
- int testing;
- int jpeg_error;
- int intr_counter_GIRQ1;
- int intr_counter_GIRQ0;
- int intr_counter_CodRepIRQ;
- int intr_counter_JPEGRepIRQ;
- int field_counter;
- int IRQ1_in;
- int IRQ1_out;
- int JPEG_in;
- int JPEG_out;
- int JPEG_0;
- int JPEG_1;
- int END_event_missed;
- int JPEG_missed;
- int JPEG_error;
- int num_errors;
- int JPEG_max_missed;
- int JPEG_min_missed;
-
- u32 last_isr;
- unsigned long frame_num;
-
- wait_queue_head_t test_q;
-};
-
-static inline struct zoran *to_zoran(struct v4l2_device *v4l2_dev)
-{
- return container_of(v4l2_dev, struct zoran, v4l2_dev);
-}
-
-/* There was something called _ALPHA_BUZ that used the PCI address instead of
- * the kernel iomapped address for btread/btwrite. */
-#define btwrite(dat,adr) writel((dat), zr->zr36057_mem+(adr))
-#define btread(adr) readl(zr->zr36057_mem+(adr))
-
-#define btand(dat,adr) btwrite((dat) & btread(adr), adr)
-#define btor(dat,adr) btwrite((dat) | btread(adr), adr)
-#define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr)
-
-#endif
+++ /dev/null
-/*
- * Zoran zr36057/zr36067 PCI controller driver, for the
- * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux
- * Media Labs LML33/LML33R10.
- *
- * This part handles card-specific data and detection
- *
- * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
- *
- * Currently maintained by:
- * Ronald Bultje <rbultje@ronald.bitfreak.net>
- * Laurent Pinchart <laurent.pinchart@skynet.be>
- * Mailinglist <mjpeg-users@lists.sf.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-
-#include <linux/proc_fs.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/videodev2.h>
-#include <linux/spinlock.h>
-#include <linux/sem.h>
-#include <linux/kmod.h>
-#include <linux/wait.h>
-
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-#include <media/v4l2-common.h>
-#include <media/i2c/bt819.h>
-
-#include "videocodec.h"
-#include "zoran.h"
-#include "zoran_card.h"
-#include "zoran_device.h"
-#include "zoran_procfs.h"
-
-extern const struct zoran_format zoran_formats[];
-
-static int card[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 };
-module_param_array(card, int, NULL, 0444);
-MODULE_PARM_DESC(card, "Card type");
-
-/*
- The video mem address of the video card.
- The driver has a little database for some videocards
- to determine it from there. If your video card is not in there
- you have either to give it to the driver as a parameter
- or set in in a VIDIOCSFBUF ioctl
- */
-
-static unsigned long vidmem; /* default = 0 - Video memory base address */
-module_param_hw(vidmem, ulong, iomem, 0444);
-MODULE_PARM_DESC(vidmem, "Default video memory base address");
-
-/*
- Default input and video norm at startup of the driver.
-*/
-
-static unsigned int default_input; /* default 0 = Composite, 1 = S-Video */
-module_param(default_input, uint, 0444);
-MODULE_PARM_DESC(default_input,
- "Default input (0=Composite, 1=S-Video, 2=Internal)");
-
-static int default_mux = 1; /* 6 Eyes input selection */
-module_param(default_mux, int, 0644);
-MODULE_PARM_DESC(default_mux,
- "Default 6 Eyes mux setting (Input selection)");
-
-static int default_norm; /* default 0 = PAL, 1 = NTSC 2 = SECAM */
-module_param(default_norm, int, 0444);
-MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)");
-
-/* /dev/videoN, -1 for autodetect */
-static int video_nr[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 };
-module_param_array(video_nr, int, NULL, 0444);
-MODULE_PARM_DESC(video_nr, "Video device number (-1=Auto)");
-
-int v4l_nbufs = 4;
-int v4l_bufsize = 864; /* Everybody should be able to work with this setting */
-module_param(v4l_nbufs, int, 0644);
-MODULE_PARM_DESC(v4l_nbufs, "Maximum number of V4L buffers to use");
-module_param(v4l_bufsize, int, 0644);
-MODULE_PARM_DESC(v4l_bufsize, "Maximum size per V4L buffer (in kB)");
-
-int jpg_nbufs = 32;
-int jpg_bufsize = 512; /* max size for 100% quality full-PAL frame */
-module_param(jpg_nbufs, int, 0644);
-MODULE_PARM_DESC(jpg_nbufs, "Maximum number of JPG buffers to use");
-module_param(jpg_bufsize, int, 0644);
-MODULE_PARM_DESC(jpg_bufsize, "Maximum size per JPG buffer (in kB)");
-
-int pass_through = 0; /* 1=Pass through TV signal when device is not used */
- /* 0=Show color bar when device is not used (LML33: only if lml33dpath=1) */
-module_param(pass_through, int, 0644);
-MODULE_PARM_DESC(pass_through,
- "Pass TV signal through to TV-out when idling");
-
-int zr36067_debug = 1;
-module_param_named(debug, zr36067_debug, int, 0644);
-MODULE_PARM_DESC(debug, "Debug level (0-5)");
-
-#define ZORAN_VERSION "0.10.1"
-
-MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver");
-MODULE_AUTHOR("Serguei Miridonov");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(ZORAN_VERSION);
-
-#define ZR_DEVICE(subven, subdev, data) { \
- .vendor = PCI_VENDOR_ID_ZORAN, .device = PCI_DEVICE_ID_ZORAN_36057, \
- .subvendor = (subven), .subdevice = (subdev), .driver_data = (data) }
-
-static const struct pci_device_id zr36067_pci_tbl[] = {
- ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC10PLUS, DC10plus),
- ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC30PLUS, DC30plus),
- ZR_DEVICE(PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, PCI_DEVICE_ID_LML_33R10, LML33R10),
- ZR_DEVICE(PCI_VENDOR_ID_IOMEGA, PCI_DEVICE_ID_IOMEGA_BUZ, BUZ),
- ZR_DEVICE(PCI_ANY_ID, PCI_ANY_ID, NUM_CARDS),
- {0}
-};
-MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl);
-
-static unsigned int zoran_num; /* number of cards found */
-
-/* videocodec bus functions ZR36060 */
-static u32
-zr36060_read (struct videocodec *codec,
- u16 reg)
-{
- struct zoran *zr = (struct zoran *) codec->master_data->data;
- __u32 data;
-
- if (post_office_wait(zr)
- || post_office_write(zr, 0, 1, reg >> 8)
- || post_office_write(zr, 0, 2, reg & 0xff)) {
- return -1;
- }
-
- data = post_office_read(zr, 0, 3) & 0xff;
- return data;
-}
-
-static void
-zr36060_write (struct videocodec *codec,
- u16 reg,
- u32 val)
-{
- struct zoran *zr = (struct zoran *) codec->master_data->data;
-
- if (post_office_wait(zr)
- || post_office_write(zr, 0, 1, reg >> 8)
- || post_office_write(zr, 0, 2, reg & 0xff)) {
- return;
- }
-
- post_office_write(zr, 0, 3, val & 0xff);
-}
-
-/* videocodec bus functions ZR36050 */
-static u32
-zr36050_read (struct videocodec *codec,
- u16 reg)
-{
- struct zoran *zr = (struct zoran *) codec->master_data->data;
- __u32 data;
-
- if (post_office_wait(zr)
- || post_office_write(zr, 1, 0, reg >> 2)) { // reg. HIGHBYTES
- return -1;
- }
-
- data = post_office_read(zr, 0, reg & 0x03) & 0xff; // reg. LOWBYTES + read
- return data;
-}
-
-static void
-zr36050_write (struct videocodec *codec,
- u16 reg,
- u32 val)
-{
- struct zoran *zr = (struct zoran *) codec->master_data->data;
-
- if (post_office_wait(zr)
- || post_office_write(zr, 1, 0, reg >> 2)) { // reg. HIGHBYTES
- return;
- }
-
- post_office_write(zr, 0, reg & 0x03, val & 0xff); // reg. LOWBYTES + wr. data
-}
-
-/* videocodec bus functions ZR36016 */
-static u32
-zr36016_read (struct videocodec *codec,
- u16 reg)
-{
- struct zoran *zr = (struct zoran *) codec->master_data->data;
- __u32 data;
-
- if (post_office_wait(zr)) {
- return -1;
- }
-
- data = post_office_read(zr, 2, reg & 0x03) & 0xff; // read
- return data;
-}
-
-/* hack for in zoran_device.c */
-void
-zr36016_write (struct videocodec *codec,
- u16 reg,
- u32 val)
-{
- struct zoran *zr = (struct zoran *) codec->master_data->data;
-
- if (post_office_wait(zr)) {
- return;
- }
-
- post_office_write(zr, 2, reg & 0x03, val & 0x0ff); // wr. data
-}
-
-/*
- * Board specific information
- */
-
-static void
-dc10_init (struct zoran *zr)
-{
- dprintk(3, KERN_DEBUG "%s: %s\n", ZR_DEVNAME(zr), __func__);
-
- /* Pixel clock selection */
- GPIO(zr, 4, 0);
- GPIO(zr, 5, 1);
- /* Enable the video bus sync signals */
- GPIO(zr, 7, 0);
-}
-
-static void
-dc10plus_init (struct zoran *zr)
-{
- dprintk(3, KERN_DEBUG "%s: %s\n", ZR_DEVNAME(zr), __func__);
-}
-
-static void
-buz_init (struct zoran *zr)
-{
- dprintk(3, KERN_DEBUG "%s: %s\n", ZR_DEVNAME(zr), __func__);
-
- /* some stuff from Iomega */
- pci_write_config_dword(zr->pci_dev, 0xfc, 0x90680f15);
- pci_write_config_dword(zr->pci_dev, 0x0c, 0x00012020);
- pci_write_config_dword(zr->pci_dev, 0xe8, 0xc0200000);
-}
-
-static void
-lml33_init (struct zoran *zr)
-{
- dprintk(3, KERN_DEBUG "%s: %s\n", ZR_DEVNAME(zr), __func__);
-
- GPIO(zr, 2, 1); // Set Composite input/output
-}
-
-static void
-avs6eyes_init (struct zoran *zr)
-{
- // AverMedia 6-Eyes original driver by Christer Weinigel
-
- // Lifted straight from Christer's old driver and
- // modified slightly by Martin Samuelsson.
-
- int mux = default_mux; /* 1 = BT866, 7 = VID1 */
-
- GPIO(zr, 4, 1); /* Bt866 SLEEP on */
- udelay(2);
-
- GPIO(zr, 0, 1); /* ZR36060 /RESET on */
- GPIO(zr, 1, 0); /* ZR36060 /SLEEP on */
- GPIO(zr, 2, mux & 1); /* MUX S0 */
- GPIO(zr, 3, 0); /* /FRAME on */
- GPIO(zr, 4, 0); /* Bt866 SLEEP off */
- GPIO(zr, 5, mux & 2); /* MUX S1 */
- GPIO(zr, 6, 0); /* ? */
- GPIO(zr, 7, mux & 4); /* MUX S2 */
-
-}
-
-static char *
-codecid_to_modulename (u16 codecid)
-{
- char *name = NULL;
-
- switch (codecid) {
- case CODEC_TYPE_ZR36060:
- name = "zr36060";
- break;
- case CODEC_TYPE_ZR36050:
- name = "zr36050";
- break;
- case CODEC_TYPE_ZR36016:
- name = "zr36016";
- break;
- }
-
- return name;
-}
-
-// struct tvnorm {
-// u16 Wt, Wa, HStart, HSyncStart, Ht, Ha, VStart;
-// };
-
-static struct tvnorm f50sqpixel = { 944, 768, 83, 880, 625, 576, 16 };
-static struct tvnorm f60sqpixel = { 780, 640, 51, 716, 525, 480, 12 };
-static struct tvnorm f50ccir601 = { 864, 720, 75, 804, 625, 576, 18 };
-static struct tvnorm f60ccir601 = { 858, 720, 57, 788, 525, 480, 16 };
-
-static struct tvnorm f50ccir601_lml33 = { 864, 720, 75+34, 804, 625, 576, 18 };
-static struct tvnorm f60ccir601_lml33 = { 858, 720, 57+34, 788, 525, 480, 16 };
-
-/* The DC10 (57/16/50) uses VActive as HSync, so HStart must be 0 */
-static struct tvnorm f50sqpixel_dc10 = { 944, 768, 0, 880, 625, 576, 0 };
-static struct tvnorm f60sqpixel_dc10 = { 780, 640, 0, 716, 525, 480, 12 };
-
-/* FIXME: I cannot swap U and V in saa7114, so i do one
- * pixel left shift in zoran (75 -> 74)
- * (Maxim Yevtyushkin <max@linuxmedialabs.com>) */
-static struct tvnorm f50ccir601_lm33r10 = { 864, 720, 74+54, 804, 625, 576, 18 };
-static struct tvnorm f60ccir601_lm33r10 = { 858, 720, 56+54, 788, 525, 480, 16 };
-
-/* FIXME: The ks0127 seem incapable of swapping U and V, too, which is why I
- * copy Maxim's left shift hack for the 6 Eyes.
- *
- * Christer's driver used the unshifted norms, though...
- * /Sam */
-static struct tvnorm f50ccir601_avs6eyes = { 864, 720, 74, 804, 625, 576, 18 };
-static struct tvnorm f60ccir601_avs6eyes = { 858, 720, 56, 788, 525, 480, 16 };
-
-static const unsigned short vpx3220_addrs[] = { 0x43, 0x47, I2C_CLIENT_END };
-static const unsigned short saa7110_addrs[] = { 0x4e, 0x4f, I2C_CLIENT_END };
-static const unsigned short saa7111_addrs[] = { 0x25, 0x24, I2C_CLIENT_END };
-static const unsigned short saa7114_addrs[] = { 0x21, 0x20, I2C_CLIENT_END };
-static const unsigned short adv717x_addrs[] = { 0x6a, 0x6b, 0x2a, 0x2b, I2C_CLIENT_END };
-static const unsigned short ks0127_addrs[] = { 0x6c, 0x6d, I2C_CLIENT_END };
-static const unsigned short saa7185_addrs[] = { 0x44, I2C_CLIENT_END };
-static const unsigned short bt819_addrs[] = { 0x45, I2C_CLIENT_END };
-static const unsigned short bt856_addrs[] = { 0x44, I2C_CLIENT_END };
-static const unsigned short bt866_addrs[] = { 0x44, I2C_CLIENT_END };
-
-static struct card_info zoran_cards[NUM_CARDS] = {
- {
- .type = DC10_old,
- .name = "DC10(old)",
- .i2c_decoder = "vpx3220a",
- .addrs_decoder = vpx3220_addrs,
- .video_codec = CODEC_TYPE_ZR36050,
- .video_vfe = CODEC_TYPE_ZR36016,
-
- .inputs = 3,
- .input = {
- { 1, "Composite" },
- { 2, "S-Video" },
- { 0, "Internal/comp" }
- },
- .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM,
- .tvn = {
- &f50sqpixel_dc10,
- &f60sqpixel_dc10,
- &f50sqpixel_dc10
- },
- .jpeg_int = 0,
- .vsync_int = ZR36057_ISR_GIRQ1,
- .gpio = { 2, 1, -1, 3, 7, 0, 4, 5 },
- .gpio_pol = { 0, 0, 0, 1, 0, 0, 0, 0 },
- .gpcs = { -1, 0 },
- .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 },
- .gws_not_connected = 0,
- .input_mux = 0,
- .init = &dc10_init,
- }, {
- .type = DC10_new,
- .name = "DC10(new)",
- .i2c_decoder = "saa7110",
- .addrs_decoder = saa7110_addrs,
- .i2c_encoder = "adv7175",
- .addrs_encoder = adv717x_addrs,
- .video_codec = CODEC_TYPE_ZR36060,
-
- .inputs = 3,
- .input = {
- { 0, "Composite" },
- { 7, "S-Video" },
- { 5, "Internal/comp" }
- },
- .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM,
- .tvn = {
- &f50sqpixel,
- &f60sqpixel,
- &f50sqpixel},
- .jpeg_int = ZR36057_ISR_GIRQ0,
- .vsync_int = ZR36057_ISR_GIRQ1,
- .gpio = { 3, 0, 6, 1, 2, -1, 4, 5 },
- .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 },
- .gpcs = { -1, 1},
- .vfe_pol = { 1, 1, 1, 1, 0, 0, 0, 0 },
- .gws_not_connected = 0,
- .input_mux = 0,
- .init = &dc10plus_init,
- }, {
- .type = DC10plus,
- .name = "DC10plus",
- .i2c_decoder = "saa7110",
- .addrs_decoder = saa7110_addrs,
- .i2c_encoder = "adv7175",
- .addrs_encoder = adv717x_addrs,
- .video_codec = CODEC_TYPE_ZR36060,
-
- .inputs = 3,
- .input = {
- { 0, "Composite" },
- { 7, "S-Video" },
- { 5, "Internal/comp" }
- },
- .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM,
- .tvn = {
- &f50sqpixel,
- &f60sqpixel,
- &f50sqpixel
- },
- .jpeg_int = ZR36057_ISR_GIRQ0,
- .vsync_int = ZR36057_ISR_GIRQ1,
- .gpio = { 3, 0, 6, 1, 2, -1, 4, 5 },
- .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 },
- .gpcs = { -1, 1 },
- .vfe_pol = { 1, 1, 1, 1, 0, 0, 0, 0 },
- .gws_not_connected = 0,
- .input_mux = 0,
- .init = &dc10plus_init,
- }, {
- .type = DC30,
- .name = "DC30",
- .i2c_decoder = "vpx3220a",
- .addrs_decoder = vpx3220_addrs,
- .i2c_encoder = "adv7175",
- .addrs_encoder = adv717x_addrs,
- .video_codec = CODEC_TYPE_ZR36050,
- .video_vfe = CODEC_TYPE_ZR36016,
-
- .inputs = 3,
- .input = {
- { 1, "Composite" },
- { 2, "S-Video" },
- { 0, "Internal/comp" }
- },
- .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM,
- .tvn = {
- &f50sqpixel_dc10,
- &f60sqpixel_dc10,
- &f50sqpixel_dc10
- },
- .jpeg_int = 0,
- .vsync_int = ZR36057_ISR_GIRQ1,
- .gpio = { 2, 1, -1, 3, 7, 0, 4, 5 },
- .gpio_pol = { 0, 0, 0, 1, 0, 0, 0, 0 },
- .gpcs = { -1, 0 },
- .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 },
- .gws_not_connected = 0,
- .input_mux = 0,
- .init = &dc10_init,
- }, {
- .type = DC30plus,
- .name = "DC30plus",
- .i2c_decoder = "vpx3220a",
- .addrs_decoder = vpx3220_addrs,
- .i2c_encoder = "adv7175",
- .addrs_encoder = adv717x_addrs,
- .video_codec = CODEC_TYPE_ZR36050,
- .video_vfe = CODEC_TYPE_ZR36016,
-
- .inputs = 3,
- .input = {
- { 1, "Composite" },
- { 2, "S-Video" },
- { 0, "Internal/comp" }
- },
- .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM,
- .tvn = {
- &f50sqpixel_dc10,
- &f60sqpixel_dc10,
- &f50sqpixel_dc10
- },
- .jpeg_int = 0,
- .vsync_int = ZR36057_ISR_GIRQ1,
- .gpio = { 2, 1, -1, 3, 7, 0, 4, 5 },
- .gpio_pol = { 0, 0, 0, 1, 0, 0, 0, 0 },
- .gpcs = { -1, 0 },
- .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 },
- .gws_not_connected = 0,
- .input_mux = 0,
- .init = &dc10_init,
- }, {
- .type = LML33,
- .name = "LML33",
- .i2c_decoder = "bt819a",
- .addrs_decoder = bt819_addrs,
- .i2c_encoder = "bt856",
- .addrs_encoder = bt856_addrs,
- .video_codec = CODEC_TYPE_ZR36060,
-
- .inputs = 2,
- .input = {
- { 0, "Composite" },
- { 7, "S-Video" }
- },
- .norms = V4L2_STD_NTSC|V4L2_STD_PAL,
- .tvn = {
- &f50ccir601_lml33,
- &f60ccir601_lml33,
- NULL
- },
- .jpeg_int = ZR36057_ISR_GIRQ1,
- .vsync_int = ZR36057_ISR_GIRQ0,
- .gpio = { 1, -1, 3, 5, 7, -1, -1, -1 },
- .gpio_pol = { 0, 0, 0, 0, 1, 0, 0, 0 },
- .gpcs = { 3, 1 },
- .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 },
- .gws_not_connected = 1,
- .input_mux = 0,
- .init = &lml33_init,
- }, {
- .type = LML33R10,
- .name = "LML33R10",
- .i2c_decoder = "saa7114",
- .addrs_decoder = saa7114_addrs,
- .i2c_encoder = "adv7170",
- .addrs_encoder = adv717x_addrs,
- .video_codec = CODEC_TYPE_ZR36060,
-
- .inputs = 2,
- .input = {
- { 0, "Composite" },
- { 7, "S-Video" }
- },
- .norms = V4L2_STD_NTSC|V4L2_STD_PAL,
- .tvn = {
- &f50ccir601_lm33r10,
- &f60ccir601_lm33r10,
- NULL
- },
- .jpeg_int = ZR36057_ISR_GIRQ1,
- .vsync_int = ZR36057_ISR_GIRQ0,
- .gpio = { 1, -1, 3, 5, 7, -1, -1, -1 },
- .gpio_pol = { 0, 0, 0, 0, 1, 0, 0, 0 },
- .gpcs = { 3, 1 },
- .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 },
- .gws_not_connected = 1,
- .input_mux = 0,
- .init = &lml33_init,
- }, {
- .type = BUZ,
- .name = "Buz",
- .i2c_decoder = "saa7111",
- .addrs_decoder = saa7111_addrs,
- .i2c_encoder = "saa7185",
- .addrs_encoder = saa7185_addrs,
- .video_codec = CODEC_TYPE_ZR36060,
-
- .inputs = 2,
- .input = {
- { 3, "Composite" },
- { 7, "S-Video" }
- },
- .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM,
- .tvn = {
- &f50ccir601,
- &f60ccir601,
- &f50ccir601
- },
- .jpeg_int = ZR36057_ISR_GIRQ1,
- .vsync_int = ZR36057_ISR_GIRQ0,
- .gpio = { 1, -1, 3, -1, -1, -1, -1, -1 },
- .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 },
- .gpcs = { 3, 1 },
- .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 },
- .gws_not_connected = 1,
- .input_mux = 0,
- .init = &buz_init,
- }, {
- .type = AVS6EYES,
- .name = "6-Eyes",
- /* AverMedia chose not to brand the 6-Eyes. Thus it
- can't be autodetected, and requires card=x. */
- .i2c_decoder = "ks0127",
- .addrs_decoder = ks0127_addrs,
- .i2c_encoder = "bt866",
- .addrs_encoder = bt866_addrs,
- .video_codec = CODEC_TYPE_ZR36060,
-
- .inputs = 10,
- .input = {
- { 0, "Composite 1" },
- { 1, "Composite 2" },
- { 2, "Composite 3" },
- { 4, "Composite 4" },
- { 5, "Composite 5" },
- { 6, "Composite 6" },
- { 8, "S-Video 1" },
- { 9, "S-Video 2" },
- {10, "S-Video 3" },
- {15, "YCbCr" }
- },
- .norms = V4L2_STD_NTSC|V4L2_STD_PAL,
- .tvn = {
- &f50ccir601_avs6eyes,
- &f60ccir601_avs6eyes,
- NULL
- },
- .jpeg_int = ZR36057_ISR_GIRQ1,
- .vsync_int = ZR36057_ISR_GIRQ0,
- .gpio = { 1, 0, 3, -1, -1, -1, -1, -1 },// Validity unknown /Sam
- .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, // Validity unknown /Sam
- .gpcs = { 3, 1 }, // Validity unknown /Sam
- .vfe_pol = { 1, 0, 0, 0, 0, 1, 0, 0 }, // Validity unknown /Sam
- .gws_not_connected = 1,
- .input_mux = 1,
- .init = &avs6eyes_init,
- }
-
-};
-
-/*
- * I2C functions
- */
-/* software I2C functions */
-static int
-zoran_i2c_getsda (void *data)
-{
- struct zoran *zr = (struct zoran *) data;
-
- return (btread(ZR36057_I2CBR) >> 1) & 1;
-}
-
-static int
-zoran_i2c_getscl (void *data)
-{
- struct zoran *zr = (struct zoran *) data;
-
- return btread(ZR36057_I2CBR) & 1;
-}
-
-static void
-zoran_i2c_setsda (void *data,
- int state)
-{
- struct zoran *zr = (struct zoran *) data;
-
- if (state)
- zr->i2cbr |= 2;
- else
- zr->i2cbr &= ~2;
- btwrite(zr->i2cbr, ZR36057_I2CBR);
-}
-
-static void
-zoran_i2c_setscl (void *data,
- int state)
-{
- struct zoran *zr = (struct zoran *) data;
-
- if (state)
- zr->i2cbr |= 1;
- else
- zr->i2cbr &= ~1;
- btwrite(zr->i2cbr, ZR36057_I2CBR);
-}
-
-static const struct i2c_algo_bit_data zoran_i2c_bit_data_template = {
- .setsda = zoran_i2c_setsda,
- .setscl = zoran_i2c_setscl,
- .getsda = zoran_i2c_getsda,
- .getscl = zoran_i2c_getscl,
- .udelay = 10,
- .timeout = 100,
-};
-
-static int
-zoran_register_i2c (struct zoran *zr)
-{
- zr->i2c_algo = zoran_i2c_bit_data_template;
- zr->i2c_algo.data = zr;
- strscpy(zr->i2c_adapter.name, ZR_DEVNAME(zr),
- sizeof(zr->i2c_adapter.name));
- i2c_set_adapdata(&zr->i2c_adapter, &zr->v4l2_dev);
- zr->i2c_adapter.algo_data = &zr->i2c_algo;
- zr->i2c_adapter.dev.parent = &zr->pci_dev->dev;
- return i2c_bit_add_bus(&zr->i2c_adapter);
-}
-
-static void
-zoran_unregister_i2c (struct zoran *zr)
-{
- i2c_del_adapter(&zr->i2c_adapter);
-}
-
-/* Check a zoran_params struct for correctness, insert default params */
-
-int
-zoran_check_jpg_settings (struct zoran *zr,
- struct zoran_jpg_settings *settings,
- int try)
-{
- int err = 0, err0 = 0;
-
- dprintk(4,
- KERN_DEBUG
- "%s: %s - dec: %d, Hdcm: %d, Vdcm: %d, Tdcm: %d\n",
- ZR_DEVNAME(zr), __func__, settings->decimation, settings->HorDcm,
- settings->VerDcm, settings->TmpDcm);
- dprintk(4,
- KERN_DEBUG
- "%s: %s - x: %d, y: %d, w: %d, y: %d\n",
- ZR_DEVNAME(zr), __func__, settings->img_x, settings->img_y,
- settings->img_width, settings->img_height);
- /* Check decimation, set default values for decimation = 1, 2, 4 */
- switch (settings->decimation) {
- case 1:
-
- settings->HorDcm = 1;
- settings->VerDcm = 1;
- settings->TmpDcm = 1;
- settings->field_per_buff = 2;
- settings->img_x = 0;
- settings->img_y = 0;
- settings->img_width = BUZ_MAX_WIDTH;
- settings->img_height = BUZ_MAX_HEIGHT / 2;
- break;
- case 2:
-
- settings->HorDcm = 2;
- settings->VerDcm = 1;
- settings->TmpDcm = 2;
- settings->field_per_buff = 1;
- settings->img_x = (BUZ_MAX_WIDTH == 720) ? 8 : 0;
- settings->img_y = 0;
- settings->img_width =
- (BUZ_MAX_WIDTH == 720) ? 704 : BUZ_MAX_WIDTH;
- settings->img_height = BUZ_MAX_HEIGHT / 2;
- break;
- case 4:
-
- if (zr->card.type == DC10_new) {
- dprintk(1,
- KERN_DEBUG
- "%s: %s - HDec by 4 is not supported on the DC10\n",
- ZR_DEVNAME(zr), __func__);
- err0++;
- break;
- }
-
- settings->HorDcm = 4;
- settings->VerDcm = 2;
- settings->TmpDcm = 2;
- settings->field_per_buff = 1;
- settings->img_x = (BUZ_MAX_WIDTH == 720) ? 8 : 0;
- settings->img_y = 0;
- settings->img_width =
- (BUZ_MAX_WIDTH == 720) ? 704 : BUZ_MAX_WIDTH;
- settings->img_height = BUZ_MAX_HEIGHT / 2;
- break;
- case 0:
-
- /* We have to check the data the user has set */
-
- if (settings->HorDcm != 1 && settings->HorDcm != 2 &&
- (zr->card.type == DC10_new || settings->HorDcm != 4)) {
- settings->HorDcm = clamp(settings->HorDcm, 1, 2);
- err0++;
- }
- if (settings->VerDcm != 1 && settings->VerDcm != 2) {
- settings->VerDcm = clamp(settings->VerDcm, 1, 2);
- err0++;
- }
- if (settings->TmpDcm != 1 && settings->TmpDcm != 2) {
- settings->TmpDcm = clamp(settings->TmpDcm, 1, 2);
- err0++;
- }
- if (settings->field_per_buff != 1 &&
- settings->field_per_buff != 2) {
- settings->field_per_buff = clamp(settings->field_per_buff, 1, 2);
- err0++;
- }
- if (settings->img_x < 0) {
- settings->img_x = 0;
- err0++;
- }
- if (settings->img_y < 0) {
- settings->img_y = 0;
- err0++;
- }
- if (settings->img_width < 0 || settings->img_width > BUZ_MAX_WIDTH) {
- settings->img_width = clamp(settings->img_width, 0, (int)BUZ_MAX_WIDTH);
- err0++;
- }
- if (settings->img_height < 0 || settings->img_height > BUZ_MAX_HEIGHT / 2) {
- settings->img_height = clamp(settings->img_height, 0, BUZ_MAX_HEIGHT / 2);
- err0++;
- }
- if (settings->img_x + settings->img_width > BUZ_MAX_WIDTH) {
- settings->img_x = BUZ_MAX_WIDTH - settings->img_width;
- err0++;
- }
- if (settings->img_y + settings->img_height > BUZ_MAX_HEIGHT / 2) {
- settings->img_y = BUZ_MAX_HEIGHT / 2 - settings->img_height;
- err0++;
- }
- if (settings->img_width % (16 * settings->HorDcm) != 0) {
- settings->img_width -= settings->img_width % (16 * settings->HorDcm);
- if (settings->img_width == 0)
- settings->img_width = 16 * settings->HorDcm;
- err0++;
- }
- if (settings->img_height % (8 * settings->VerDcm) != 0) {
- settings->img_height -= settings->img_height % (8 * settings->VerDcm);
- if (settings->img_height == 0)
- settings->img_height = 8 * settings->VerDcm;
- err0++;
- }
-
- if (!try && err0) {
- dprintk(1,
- KERN_ERR
- "%s: %s - error in params for decimation = 0\n",
- ZR_DEVNAME(zr), __func__);
- err++;
- }
- break;
- default:
- dprintk(1,
- KERN_ERR
- "%s: %s - decimation = %d, must be 0, 1, 2 or 4\n",
- ZR_DEVNAME(zr), __func__, settings->decimation);
- err++;
- break;
- }
-
- if (settings->jpg_comp.quality > 100)
- settings->jpg_comp.quality = 100;
- if (settings->jpg_comp.quality < 5)
- settings->jpg_comp.quality = 5;
- if (settings->jpg_comp.APPn < 0)
- settings->jpg_comp.APPn = 0;
- if (settings->jpg_comp.APPn > 15)
- settings->jpg_comp.APPn = 15;
- if (settings->jpg_comp.APP_len < 0)
- settings->jpg_comp.APP_len = 0;
- if (settings->jpg_comp.APP_len > 60)
- settings->jpg_comp.APP_len = 60;
- if (settings->jpg_comp.COM_len < 0)
- settings->jpg_comp.COM_len = 0;
- if (settings->jpg_comp.COM_len > 60)
- settings->jpg_comp.COM_len = 60;
- if (err)
- return -EINVAL;
- return 0;
-}
-
-void
-zoran_open_init_params (struct zoran *zr)
-{
- int i;
-
- /* User must explicitly set a window */
- zr->overlay_settings.is_set = 0;
- zr->overlay_mask = NULL;
- zr->overlay_active = ZORAN_FREE;
-
- zr->v4l_memgrab_active = 0;
- zr->v4l_overlay_active = 0;
- zr->v4l_grab_frame = NO_GRAB_ACTIVE;
- zr->v4l_grab_seq = 0;
- zr->v4l_settings.width = 192;
- zr->v4l_settings.height = 144;
- zr->v4l_settings.format = &zoran_formats[7]; /* YUY2 - YUV-4:2:2 packed */
- zr->v4l_settings.bytesperline =
- zr->v4l_settings.width *
- ((zr->v4l_settings.format->depth + 7) / 8);
-
- /* DMA ring stuff for V4L */
- zr->v4l_pend_tail = 0;
- zr->v4l_pend_head = 0;
- zr->v4l_sync_tail = 0;
- zr->v4l_buffers.active = ZORAN_FREE;
- for (i = 0; i < VIDEO_MAX_FRAME; i++) {
- zr->v4l_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */
- }
- zr->v4l_buffers.allocated = 0;
-
- for (i = 0; i < BUZ_MAX_FRAME; i++) {
- zr->jpg_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */
- }
- zr->jpg_buffers.active = ZORAN_FREE;
- zr->jpg_buffers.allocated = 0;
- /* Set necessary params and call zoran_check_jpg_settings to set the defaults */
- zr->jpg_settings.decimation = 1;
- zr->jpg_settings.jpg_comp.quality = 50; /* default compression factor 8 */
- if (zr->card.type != BUZ)
- zr->jpg_settings.odd_even = 1;
- else
- zr->jpg_settings.odd_even = 0;
- zr->jpg_settings.jpg_comp.APPn = 0;
- zr->jpg_settings.jpg_comp.APP_len = 0; /* No APPn marker */
- memset(zr->jpg_settings.jpg_comp.APP_data, 0,
- sizeof(zr->jpg_settings.jpg_comp.APP_data));
- zr->jpg_settings.jpg_comp.COM_len = 0; /* No COM marker */
- memset(zr->jpg_settings.jpg_comp.COM_data, 0,
- sizeof(zr->jpg_settings.jpg_comp.COM_data));
- zr->jpg_settings.jpg_comp.jpeg_markers =
- V4L2_JPEG_MARKER_DHT | V4L2_JPEG_MARKER_DQT;
- i = zoran_check_jpg_settings(zr, &zr->jpg_settings, 0);
- if (i)
- dprintk(1, KERN_ERR "%s: %s internal error\n",
- ZR_DEVNAME(zr), __func__);
-
- clear_interrupt_counters(zr);
- zr->testing = 0;
-}
-
-static void test_interrupts (struct zoran *zr)
-{
- DEFINE_WAIT(wait);
- int timeout, icr;
-
- clear_interrupt_counters(zr);
-
- zr->testing = 1;
- icr = btread(ZR36057_ICR);
- btwrite(0x78000000 | ZR36057_ICR_IntPinEn, ZR36057_ICR);
- prepare_to_wait(&zr->test_q, &wait, TASK_INTERRUPTIBLE);
- timeout = schedule_timeout(HZ);
- finish_wait(&zr->test_q, &wait);
- btwrite(0, ZR36057_ICR);
- btwrite(0x78000000, ZR36057_ISR);
- zr->testing = 0;
- dprintk(5, KERN_INFO "%s: Testing interrupts...\n", ZR_DEVNAME(zr));
- if (timeout) {
- dprintk(1, ": time spent: %d\n", 1 * HZ - timeout);
- }
- if (zr36067_debug > 1)
- print_interrupts(zr);
- btwrite(icr, ZR36057_ICR);
-}
-
-static int zr36057_init (struct zoran *zr)
-{
- int j, err;
-
- dprintk(1,
- KERN_INFO
- "%s: %s - initializing card[%d], zr=%p\n",
- ZR_DEVNAME(zr), __func__, zr->id, zr);
-
- /* default setup of all parameters which will persist between opens */
- zr->user = 0;
-
- init_waitqueue_head(&zr->v4l_capq);
- init_waitqueue_head(&zr->jpg_capq);
- init_waitqueue_head(&zr->test_q);
- zr->jpg_buffers.allocated = 0;
- zr->v4l_buffers.allocated = 0;
-
- zr->vbuf_base = (void *) vidmem;
- zr->vbuf_width = 0;
- zr->vbuf_height = 0;
- zr->vbuf_depth = 0;
- zr->vbuf_bytesperline = 0;
-
- /* Avoid nonsense settings from user for default input/norm */
- if (default_norm < 0 || default_norm > 2)
- default_norm = 0;
- if (default_norm == 0) {
- zr->norm = V4L2_STD_PAL;
- zr->timing = zr->card.tvn[0];
- } else if (default_norm == 1) {
- zr->norm = V4L2_STD_NTSC;
- zr->timing = zr->card.tvn[1];
- } else {
- zr->norm = V4L2_STD_SECAM;
- zr->timing = zr->card.tvn[2];
- }
- if (zr->timing == NULL) {
- dprintk(1,
- KERN_WARNING
- "%s: %s - default TV standard not supported by hardware. PAL will be used.\n",
- ZR_DEVNAME(zr), __func__);
- zr->norm = V4L2_STD_PAL;
- zr->timing = zr->card.tvn[0];
- }
-
- if (default_input > zr->card.inputs-1) {
- dprintk(1,
- KERN_WARNING
- "%s: default_input value %d out of range (0-%d)\n",
- ZR_DEVNAME(zr), default_input, zr->card.inputs-1);
- default_input = 0;
- }
- zr->input = default_input;
-
- /* default setup (will be repeated at every open) */
- zoran_open_init_params(zr);
-
- /* allocate memory *before* doing anything to the hardware
- * in case allocation fails */
- zr->stat_com = kzalloc(BUZ_NUM_STAT_COM * 4, GFP_KERNEL);
- zr->video_dev = video_device_alloc();
- if (!zr->stat_com || !zr->video_dev) {
- dprintk(1,
- KERN_ERR
- "%s: %s - kmalloc (STAT_COM) failed\n",
- ZR_DEVNAME(zr), __func__);
- err = -ENOMEM;
- goto exit_free;
- }
- for (j = 0; j < BUZ_NUM_STAT_COM; j++) {
- zr->stat_com[j] = cpu_to_le32(1); /* mark as unavailable to zr36057 */
- }
-
- /*
- * Now add the template and register the device unit.
- */
- *zr->video_dev = zoran_template;
- zr->video_dev->v4l2_dev = &zr->v4l2_dev;
- zr->video_dev->lock = &zr->lock;
- strscpy(zr->video_dev->name, ZR_DEVNAME(zr), sizeof(zr->video_dev->name));
- /* It's not a mem2mem device, but you can both capture and output from
- one and the same device. This should really be split up into two
- device nodes, but that's a job for another day. */
- zr->video_dev->vfl_dir = VFL_DIR_M2M;
- err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr[zr->id]);
- if (err < 0)
- goto exit_free;
- video_set_drvdata(zr->video_dev, zr);
-
- zoran_init_hardware(zr);
- if (zr36067_debug > 2)
- detect_guest_activity(zr);
- test_interrupts(zr);
- if (!pass_through) {
- decoder_call(zr, video, s_stream, 0);
- encoder_call(zr, video, s_routing, 2, 0, 0);
- }
-
- zr->zoran_proc = NULL;
- zr->initialized = 1;
- return 0;
-
-exit_free:
- kfree(zr->stat_com);
- kfree(zr->video_dev);
- return err;
-}
-
-static void zoran_remove(struct pci_dev *pdev)
-{
- struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
- struct zoran *zr = to_zoran(v4l2_dev);
-
- if (!zr->initialized)
- goto exit_free;
-
- /* unregister videocodec bus */
- if (zr->codec) {
- struct videocodec_master *master = zr->codec->master_data;
-
- videocodec_detach(zr->codec);
- kfree(master);
- }
- if (zr->vfe) {
- struct videocodec_master *master = zr->vfe->master_data;
-
- videocodec_detach(zr->vfe);
- kfree(master);
- }
-
- /* unregister i2c bus */
- zoran_unregister_i2c(zr);
- /* disable PCI bus-mastering */
- zoran_set_pci_master(zr, 0);
- /* put chip into reset */
- btwrite(0, ZR36057_SPGPPCR);
- free_irq(zr->pci_dev->irq, zr);
- /* unmap and free memory */
- kfree(zr->stat_com);
- zoran_proc_cleanup(zr);
- iounmap(zr->zr36057_mem);
- pci_disable_device(zr->pci_dev);
- video_unregister_device(zr->video_dev);
-exit_free:
- v4l2_ctrl_handler_free(&zr->hdl);
- v4l2_device_unregister(&zr->v4l2_dev);
- kfree(zr);
-}
-
-void
-zoran_vdev_release (struct video_device *vdev)
-{
- kfree(vdev);
-}
-
-static struct videocodec_master *zoran_setup_videocodec(struct zoran *zr,
- int type)
-{
- struct videocodec_master *m = NULL;
-
- m = kmalloc(sizeof(struct videocodec_master), GFP_KERNEL);
- if (!m) {
- dprintk(1, KERN_ERR "%s: %s - no memory\n",
- ZR_DEVNAME(zr), __func__);
- return m;
- }
-
- /* magic and type are unused for master struct. Makes sense only at
- codec structs.
- In the past, .type were initialized to the old V4L1 .hardware
- value, as VID_HARDWARE_ZR36067
- */
- m->magic = 0L;
- m->type = 0;
-
- m->flags = CODEC_FLAG_ENCODER | CODEC_FLAG_DECODER;
- strscpy(m->name, ZR_DEVNAME(zr), sizeof(m->name));
- m->data = zr;
-
- switch (type)
- {
- case CODEC_TYPE_ZR36060:
- m->readreg = zr36060_read;
- m->writereg = zr36060_write;
- m->flags |= CODEC_FLAG_JPEG | CODEC_FLAG_VFE;
- break;
- case CODEC_TYPE_ZR36050:
- m->readreg = zr36050_read;
- m->writereg = zr36050_write;
- m->flags |= CODEC_FLAG_JPEG;
- break;
- case CODEC_TYPE_ZR36016:
- m->readreg = zr36016_read;
- m->writereg = zr36016_write;
- m->flags |= CODEC_FLAG_VFE;
- break;
- }
-
- return m;
-}
-
-static void zoran_subdev_notify(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
-{
- struct zoran *zr = to_zoran(sd->v4l2_dev);
-
- /* Bt819 needs to reset its FIFO buffer using #FRST pin and
- LML33 card uses GPIO(7) for that. */
- if (cmd == BT819_FIFO_RESET_LOW)
- GPIO(zr, 7, 0);
- else if (cmd == BT819_FIFO_RESET_HIGH)
- GPIO(zr, 7, 1);
-}
-
-/*
- * Scan for a Buz card (actually for the PCI controller ZR36057),
- * request the irq and map the io memory
- */
-static int zoran_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- unsigned char latency, need_latency;
- struct zoran *zr;
- int result;
- struct videocodec_master *master_vfe = NULL;
- struct videocodec_master *master_codec = NULL;
- int card_num;
- char *codec_name, *vfe_name;
- unsigned int nr;
-
-
- nr = zoran_num++;
- if (nr >= BUZ_MAX) {
- dprintk(1, KERN_ERR "%s: driver limited to %d card(s) maximum\n",
- ZORAN_NAME, BUZ_MAX);
- return -ENOENT;
- }
-
- zr = kzalloc(sizeof(struct zoran), GFP_KERNEL);
- if (!zr) {
- dprintk(1, KERN_ERR "%s: %s - kzalloc failed\n",
- ZORAN_NAME, __func__);
- return -ENOMEM;
- }
- zr->v4l2_dev.notify = zoran_subdev_notify;
- if (v4l2_device_register(&pdev->dev, &zr->v4l2_dev))
- goto zr_free_mem;
- zr->pci_dev = pdev;
- zr->id = nr;
- snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id);
- if (v4l2_ctrl_handler_init(&zr->hdl, 10))
- goto zr_unreg;
- zr->v4l2_dev.ctrl_handler = &zr->hdl;
- spin_lock_init(&zr->spinlock);
- mutex_init(&zr->lock);
- if (pci_enable_device(pdev))
- goto zr_unreg;
- zr->revision = zr->pci_dev->revision;
-
- dprintk(1,
- KERN_INFO
- "%s: Zoran ZR360%c7 (rev %d), irq: %d, memory: 0x%08llx\n",
- ZR_DEVNAME(zr), zr->revision < 2 ? '5' : '6', zr->revision,
- zr->pci_dev->irq, (uint64_t)pci_resource_start(zr->pci_dev, 0));
- if (zr->revision >= 2) {
- dprintk(1,
- KERN_INFO
- "%s: Subsystem vendor=0x%04x id=0x%04x\n",
- ZR_DEVNAME(zr), zr->pci_dev->subsystem_vendor,
- zr->pci_dev->subsystem_device);
- }
-
- /* Use auto-detected card type? */
- if (card[nr] == -1) {
- if (zr->revision < 2) {
- dprintk(1,
- KERN_ERR
- "%s: No card type specified, please use the card=X module parameter\n",
- ZR_DEVNAME(zr));
- dprintk(1,
- KERN_ERR
- "%s: It is not possible to auto-detect ZR36057 based cards\n",
- ZR_DEVNAME(zr));
- goto zr_unreg;
- }
-
- card_num = ent->driver_data;
- if (card_num >= NUM_CARDS) {
- dprintk(1,
- KERN_ERR
- "%s: Unknown card, try specifying card=X module parameter\n",
- ZR_DEVNAME(zr));
- goto zr_unreg;
- }
- dprintk(3,
- KERN_DEBUG
- "%s: %s() - card %s detected\n",
- ZR_DEVNAME(zr), __func__, zoran_cards[card_num].name);
- } else {
- card_num = card[nr];
- if (card_num >= NUM_CARDS || card_num < 0) {
- dprintk(1,
- KERN_ERR
- "%s: User specified card type %d out of range (0 .. %d)\n",
- ZR_DEVNAME(zr), card_num, NUM_CARDS - 1);
- goto zr_unreg;
- }
- }
-
- /* even though we make this a non pointer and thus
- * theoretically allow for making changes to this struct
- * on a per-individual card basis at runtime, this is
- * strongly discouraged. This structure is intended to
- * keep general card information, no settings or anything */
- zr->card = zoran_cards[card_num];
- snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)),
- "%s[%u]", zr->card.name, zr->id);
-
- zr->zr36057_mem = pci_ioremap_bar(zr->pci_dev, 0);
- if (!zr->zr36057_mem) {
- dprintk(1, KERN_ERR "%s: %s() - ioremap failed\n",
- ZR_DEVNAME(zr), __func__);
- goto zr_unreg;
- }
-
- result = request_irq(zr->pci_dev->irq, zoran_irq,
- IRQF_SHARED, ZR_DEVNAME(zr), zr);
- if (result < 0) {
- if (result == -EINVAL) {
- dprintk(1,
- KERN_ERR
- "%s: %s - bad irq number or handler\n",
- ZR_DEVNAME(zr), __func__);
- } else if (result == -EBUSY) {
- dprintk(1,
- KERN_ERR
- "%s: %s - IRQ %d busy, change your PnP config in BIOS\n",
- ZR_DEVNAME(zr), __func__, zr->pci_dev->irq);
- } else {
- dprintk(1,
- KERN_ERR
- "%s: %s - can't assign irq, error code %d\n",
- ZR_DEVNAME(zr), __func__, result);
- }
- goto zr_unmap;
- }
-
- /* set PCI latency timer */
- pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER,
- &latency);
- need_latency = zr->revision > 1 ? 32 : 48;
- if (latency != need_latency) {
- dprintk(2, KERN_INFO "%s: Changing PCI latency from %d to %d\n",
- ZR_DEVNAME(zr), latency, need_latency);
- pci_write_config_byte(zr->pci_dev, PCI_LATENCY_TIMER,
- need_latency);
- }
-
- zr36057_restart(zr);
- /* i2c */
- dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n",
- ZR_DEVNAME(zr));
-
- if (zoran_register_i2c(zr) < 0) {
- dprintk(1, KERN_ERR "%s: %s - can't initialize i2c bus\n",
- ZR_DEVNAME(zr), __func__);
- goto zr_free_irq;
- }
-
- zr->decoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
- &zr->i2c_adapter, zr->card.i2c_decoder,
- 0, zr->card.addrs_decoder);
-
- if (zr->card.i2c_encoder)
- zr->encoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
- &zr->i2c_adapter, zr->card.i2c_encoder,
- 0, zr->card.addrs_encoder);
-
- dprintk(2,
- KERN_INFO "%s: Initializing videocodec bus...\n",
- ZR_DEVNAME(zr));
-
- if (zr->card.video_codec) {
- codec_name = codecid_to_modulename(zr->card.video_codec);
- if (codec_name) {
- result = request_module(codec_name);
- if (result) {
- dprintk(1,
- KERN_ERR
- "%s: failed to load modules %s: %d\n",
- ZR_DEVNAME(zr), codec_name, result);
- }
- }
- }
- if (zr->card.video_vfe) {
- vfe_name = codecid_to_modulename(zr->card.video_vfe);
- if (vfe_name) {
- result = request_module(vfe_name);
- if (result < 0) {
- dprintk(1,
- KERN_ERR
- "%s: failed to load modules %s: %d\n",
- ZR_DEVNAME(zr), vfe_name, result);
- }
- }
- }
-
- /* reset JPEG codec */
- jpeg_codec_sleep(zr, 1);
- jpeg_codec_reset(zr);
- /* video bus enabled */
- /* display codec revision */
- if (zr->card.video_codec != 0) {
- master_codec = zoran_setup_videocodec(zr, zr->card.video_codec);
- if (!master_codec)
- goto zr_unreg_i2c;
- zr->codec = videocodec_attach(master_codec);
- if (!zr->codec) {
- dprintk(1, KERN_ERR "%s: %s - no codec found\n",
- ZR_DEVNAME(zr), __func__);
- goto zr_free_codec;
- }
- if (zr->codec->type != zr->card.video_codec) {
- dprintk(1, KERN_ERR "%s: %s - wrong codec\n",
- ZR_DEVNAME(zr), __func__);
- goto zr_detach_codec;
- }
- }
- if (zr->card.video_vfe != 0) {
- master_vfe = zoran_setup_videocodec(zr, zr->card.video_vfe);
- if (!master_vfe)
- goto zr_detach_codec;
- zr->vfe = videocodec_attach(master_vfe);
- if (!zr->vfe) {
- dprintk(1, KERN_ERR "%s: %s - no VFE found\n",
- ZR_DEVNAME(zr), __func__);
- goto zr_free_vfe;
- }
- if (zr->vfe->type != zr->card.video_vfe) {
- dprintk(1, KERN_ERR "%s: %s = wrong VFE\n",
- ZR_DEVNAME(zr), __func__);
- goto zr_detach_vfe;
- }
- }
-
- /* take care of Natoma chipset and a revision 1 zr36057 */
- if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) {
- zr->jpg_buffers.need_contiguous = 1;
- dprintk(1, KERN_INFO
- "%s: ZR36057/Natoma bug, max. buffer size is 128K\n",
- ZR_DEVNAME(zr));
- }
-
- if (zr36057_init(zr) < 0)
- goto zr_detach_vfe;
-
- zoran_proc_init(zr);
-
- return 0;
-
-zr_detach_vfe:
- videocodec_detach(zr->vfe);
-zr_free_vfe:
- kfree(master_vfe);
-zr_detach_codec:
- videocodec_detach(zr->codec);
-zr_free_codec:
- kfree(master_codec);
-zr_unreg_i2c:
- zoran_unregister_i2c(zr);
-zr_free_irq:
- btwrite(0, ZR36057_SPGPPCR);
- free_irq(zr->pci_dev->irq, zr);
-zr_unmap:
- iounmap(zr->zr36057_mem);
-zr_unreg:
- v4l2_ctrl_handler_free(&zr->hdl);
- v4l2_device_unregister(&zr->v4l2_dev);
-zr_free_mem:
- kfree(zr);
-
- return -ENODEV;
-}
-
-static struct pci_driver zoran_driver = {
- .name = "zr36067",
- .id_table = zr36067_pci_tbl,
- .probe = zoran_probe,
- .remove = zoran_remove,
-};
-
-static int __init zoran_init(void)
-{
- int res;
-
- printk(KERN_INFO "Zoran MJPEG board driver version %s\n",
- ZORAN_VERSION);
-
- /* check the parameters we have been given, adjust if necessary */
- if (v4l_nbufs < 2)
- v4l_nbufs = 2;
- if (v4l_nbufs > VIDEO_MAX_FRAME)
- v4l_nbufs = VIDEO_MAX_FRAME;
- /* The user specifies the in KB, we want them in byte
- * (and page aligned) */
- v4l_bufsize = PAGE_ALIGN(v4l_bufsize * 1024);
- if (v4l_bufsize < 32768)
- v4l_bufsize = 32768;
- /* 2 MB is arbitrary but sufficient for the maximum possible images */
- if (v4l_bufsize > 2048 * 1024)
- v4l_bufsize = 2048 * 1024;
- if (jpg_nbufs < 4)
- jpg_nbufs = 4;
- if (jpg_nbufs > BUZ_MAX_FRAME)
- jpg_nbufs = BUZ_MAX_FRAME;
- jpg_bufsize = PAGE_ALIGN(jpg_bufsize * 1024);
- if (jpg_bufsize < 8192)
- jpg_bufsize = 8192;
- if (jpg_bufsize > (512 * 1024))
- jpg_bufsize = 512 * 1024;
- /* Use parameter for vidmem or try to find a video card */
- if (vidmem) {
- dprintk(1,
- KERN_INFO
- "%s: Using supplied video memory base address @ 0x%lx\n",
- ZORAN_NAME, vidmem);
- }
-
- /* some mainboards might not do PCI-PCI data transfer well */
- if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL|PCIPCI_ALIMAGIK)) {
- dprintk(1,
- KERN_WARNING
- "%s: chipset does not support reliable PCI-PCI DMA\n",
- ZORAN_NAME);
- }
-
- res = pci_register_driver(&zoran_driver);
- if (res) {
- dprintk(1,
- KERN_ERR
- "%s: Unable to register ZR36057 driver\n",
- ZORAN_NAME);
- return res;
- }
-
- return 0;
-}
-
-static void __exit zoran_exit(void)
-{
- pci_unregister_driver(&zoran_driver);
-}
-
-module_init(zoran_init);
-module_exit(zoran_exit);
+++ /dev/null
-/*
- * Zoran zr36057/zr36067 PCI controller driver, for the
- * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux
- * Media Labs LML33/LML33R10.
- *
- * This part handles card-specific data and detection
- *
- * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
- *
- * Currently maintained by:
- * Ronald Bultje <rbultje@ronald.bitfreak.net>
- * Laurent Pinchart <laurent.pinchart@skynet.be>
- * Mailinglist <mjpeg-users@lists.sf.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ZORAN_CARD_H__
-#define __ZORAN_CARD_H__
-
-extern int zr36067_debug;
-
-#define dprintk(num, format, args...) \
- do { \
- if (zr36067_debug >= num) \
- printk(format, ##args); \
- } while (0)
-
-/* Anybody who uses more than four? */
-#define BUZ_MAX 4
-
-extern const struct video_device zoran_template;
-
-extern int zoran_check_jpg_settings(struct zoran *zr,
- struct zoran_jpg_settings *settings,
- int try);
-extern void zoran_open_init_params(struct zoran *zr);
-extern void zoran_vdev_release(struct video_device *vdev);
-
-void zr36016_write(struct videocodec *codec, u16 reg, u32 val);
-
-#endif /* __ZORAN_CARD_H__ */
+++ /dev/null
-/*
- * Zoran zr36057/zr36067 PCI controller driver, for the
- * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux
- * Media Labs LML33/LML33R10.
- *
- * This part handles device access (PCI/I2C/codec/...)
- *
- * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
- *
- * Currently maintained by:
- * Ronald Bultje <rbultje@ronald.bitfreak.net>
- * Laurent Pinchart <laurent.pinchart@skynet.be>
- * Mailinglist <mjpeg-users@lists.sf.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/vmalloc.h>
-#include <linux/ktime.h>
-#include <linux/sched/signal.h>
-
-#include <linux/interrupt.h>
-#include <linux/proc_fs.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-#include <linux/spinlock.h>
-#include <linux/sem.h>
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/wait.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-
-#include "videocodec.h"
-#include "zoran.h"
-#include "zoran_device.h"
-#include "zoran_card.h"
-
-#define IRQ_MASK ( ZR36057_ISR_GIRQ0 | \
- ZR36057_ISR_GIRQ1 | \
- ZR36057_ISR_JPEGRepIRQ )
-
-static bool lml33dpath; /* default = 0
- * 1 will use digital path in capture
- * mode instead of analog. It can be
- * used for picture adjustments using
- * tool like xawtv while watching image
- * on TV monitor connected to the output.
- * However, due to absence of 75 Ohm
- * load on Bt819 input, there will be
- * some image imperfections */
-
-module_param(lml33dpath, bool, 0644);
-MODULE_PARM_DESC(lml33dpath,
- "Use digital path capture mode (on LML33 cards)");
-
-static void
-zr36057_init_vfe (struct zoran *zr);
-
-/*
- * General Purpose I/O and Guest bus access
- */
-
-/*
- * This is a bit tricky. When a board lacks a GPIO function, the corresponding
- * GPIO bit number in the card_info structure is set to 0.
- */
-
-void
-GPIO (struct zoran *zr,
- int bit,
- unsigned int value)
-{
- u32 reg;
- u32 mask;
-
- /* Make sure the bit number is legal
- * A bit number of -1 (lacking) gives a mask of 0,
- * making it harmless */
- mask = (1 << (24 + bit)) & 0xff000000;
- reg = btread(ZR36057_GPPGCR1) & ~mask;
- if (value) {
- reg |= mask;
- }
- btwrite(reg, ZR36057_GPPGCR1);
- udelay(1);
-}
-
-/*
- * Wait til post office is no longer busy
- */
-
-int
-post_office_wait (struct zoran *zr)
-{
- u32 por;
-
-// while (((por = btread(ZR36057_POR)) & (ZR36057_POR_POPen | ZR36057_POR_POTime)) == ZR36057_POR_POPen) {
- while ((por = btread(ZR36057_POR)) & ZR36057_POR_POPen) {
- /* wait for something to happen */
- }
- if ((por & ZR36057_POR_POTime) && !zr->card.gws_not_connected) {
- /* In LML33/BUZ \GWS line is not connected, so it has always timeout set */
- dprintk(1, KERN_INFO "%s: pop timeout %08x\n", ZR_DEVNAME(zr),
- por);
- return -1;
- }
-
- return 0;
-}
-
-int
-post_office_write (struct zoran *zr,
- unsigned int guest,
- unsigned int reg,
- unsigned int value)
-{
- u32 por;
-
- por =
- ZR36057_POR_PODir | ZR36057_POR_POTime | ((guest & 7) << 20) |
- ((reg & 7) << 16) | (value & 0xFF);
- btwrite(por, ZR36057_POR);
-
- return post_office_wait(zr);
-}
-
-int
-post_office_read (struct zoran *zr,
- unsigned int guest,
- unsigned int reg)
-{
- u32 por;
-
- por = ZR36057_POR_POTime | ((guest & 7) << 20) | ((reg & 7) << 16);
- btwrite(por, ZR36057_POR);
- if (post_office_wait(zr) < 0) {
- return -1;
- }
-
- return btread(ZR36057_POR) & 0xFF;
-}
-
-/*
- * detect guests
- */
-
-static void
-dump_guests (struct zoran *zr)
-{
- if (zr36067_debug > 2) {
- int i, guest[8];
-
- for (i = 1; i < 8; i++) { // Don't read jpeg codec here
- guest[i] = post_office_read(zr, i, 0);
- }
-
- printk(KERN_INFO "%s: Guests: %*ph\n",
- ZR_DEVNAME(zr), 8, guest);
- }
-}
-
-void
-detect_guest_activity (struct zoran *zr)
-{
- int timeout, i, j, res, guest[8], guest0[8], change[8][3];
- ktime_t t0, t1;
-
- dump_guests(zr);
- printk(KERN_INFO "%s: Detecting guests activity, please wait...\n",
- ZR_DEVNAME(zr));
- for (i = 1; i < 8; i++) { // Don't read jpeg codec here
- guest0[i] = guest[i] = post_office_read(zr, i, 0);
- }
-
- timeout = 0;
- j = 0;
- t0 = ktime_get();
- while (timeout < 10000) {
- udelay(10);
- timeout++;
- for (i = 1; (i < 8) && (j < 8); i++) {
- res = post_office_read(zr, i, 0);
- if (res != guest[i]) {
- t1 = ktime_get();
- change[j][0] = ktime_to_us(ktime_sub(t1, t0));
- t0 = t1;
- change[j][1] = i;
- change[j][2] = res;
- j++;
- guest[i] = res;
- }
- }
- if (j >= 8)
- break;
- }
-
- printk(KERN_INFO "%s: Guests: %*ph\n", ZR_DEVNAME(zr), 8, guest0);
-
- if (j == 0) {
- printk(KERN_INFO "%s: No activity detected.\n", ZR_DEVNAME(zr));
- return;
- }
- for (i = 0; i < j; i++) {
- printk(KERN_INFO "%s: %6d: %d => 0x%02x\n", ZR_DEVNAME(zr),
- change[i][0], change[i][1], change[i][2]);
- }
-}
-
-/*
- * JPEG Codec access
- */
-
-void
-jpeg_codec_sleep (struct zoran *zr,
- int sleep)
-{
- GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_SLEEP], !sleep);
- if (!sleep) {
- dprintk(3,
- KERN_DEBUG
- "%s: jpeg_codec_sleep() - wake GPIO=0x%08x\n",
- ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1));
- udelay(500);
- } else {
- dprintk(3,
- KERN_DEBUG
- "%s: jpeg_codec_sleep() - sleep GPIO=0x%08x\n",
- ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1));
- udelay(2);
- }
-}
-
-int
-jpeg_codec_reset (struct zoran *zr)
-{
- /* Take the codec out of sleep */
- jpeg_codec_sleep(zr, 0);
-
- if (zr->card.gpcs[GPCS_JPEG_RESET] != 0xff) {
- post_office_write(zr, zr->card.gpcs[GPCS_JPEG_RESET], 0,
- 0);
- udelay(2);
- } else {
- GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 0);
- udelay(2);
- GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 1);
- udelay(2);
- }
-
- return 0;
-}
-
-/*
- * Set the registers for the size we have specified. Don't bother
- * trying to understand this without the ZR36057 manual in front of
- * you [AC].
- *
- * PS: The manual is free for download in .pdf format from
- * www.zoran.com - nicely done those folks.
- */
-
-static void
-zr36057_adjust_vfe (struct zoran *zr,
- enum zoran_codec_mode mode)
-{
- u32 reg;
-
- switch (mode) {
- case BUZ_MODE_MOTION_DECOMPRESS:
- btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR);
- reg = btread(ZR36057_VFEHCR);
- if ((reg & (1 << 10)) && zr->card.type != LML33R10) {
- reg += ((1 << 10) | 1);
- }
- btwrite(reg, ZR36057_VFEHCR);
- break;
- case BUZ_MODE_MOTION_COMPRESS:
- case BUZ_MODE_IDLE:
- default:
- if ((zr->norm & V4L2_STD_NTSC) ||
- (zr->card.type == LML33R10 &&
- (zr->norm & V4L2_STD_PAL)))
- btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR);
- else
- btor(ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR);
- reg = btread(ZR36057_VFEHCR);
- if (!(reg & (1 << 10)) && zr->card.type != LML33R10) {
- reg -= ((1 << 10) | 1);
- }
- btwrite(reg, ZR36057_VFEHCR);
- break;
- }
-}
-
-/*
- * set geometry
- */
-
-static void
-zr36057_set_vfe (struct zoran *zr,
- int video_width,
- int video_height,
- const struct zoran_format *format)
-{
- struct tvnorm *tvn;
- unsigned HStart, HEnd, VStart, VEnd;
- unsigned DispMode;
- unsigned VidWinWid, VidWinHt;
- unsigned hcrop1, hcrop2, vcrop1, vcrop2;
- unsigned Wa, We, Ha, He;
- unsigned X, Y, HorDcm, VerDcm;
- u32 reg;
- unsigned mask_line_size;
-
- tvn = zr->timing;
-
- Wa = tvn->Wa;
- Ha = tvn->Ha;
-
- dprintk(2, KERN_INFO "%s: set_vfe() - width = %d, height = %d\n",
- ZR_DEVNAME(zr), video_width, video_height);
-
- if (video_width < BUZ_MIN_WIDTH ||
- video_height < BUZ_MIN_HEIGHT ||
- video_width > Wa || video_height > Ha) {
- dprintk(1, KERN_ERR "%s: set_vfe: w=%d h=%d not valid\n",
- ZR_DEVNAME(zr), video_width, video_height);
- return;
- }
-
- /**** zr36057 ****/
-
- /* horizontal */
- VidWinWid = video_width;
- X = DIV_ROUND_UP(VidWinWid * 64, tvn->Wa);
- We = (VidWinWid * 64) / X;
- HorDcm = 64 - X;
- hcrop1 = 2 * ((tvn->Wa - We) / 4);
- hcrop2 = tvn->Wa - We - hcrop1;
- HStart = tvn->HStart ? tvn->HStart : 1;
- /* (Ronald) Original comment:
- * "| 1 Doesn't have any effect, tested on both a DC10 and a DC10+"
- * this is false. It inverses chroma values on the LML33R10 (so Cr
- * suddenly is shown as Cb and reverse, really cool effect if you
- * want to see blue faces, not useful otherwise). So don't use |1.
- * However, the DC10 has '0' as HStart, but does need |1, so we
- * use a dirty check...
- */
- HEnd = HStart + tvn->Wa - 1;
- HStart += hcrop1;
- HEnd -= hcrop2;
- reg = ((HStart & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HStart)
- | ((HEnd & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HEnd);
- if (zr->card.vfe_pol.hsync_pol)
- reg |= ZR36057_VFEHCR_HSPol;
- btwrite(reg, ZR36057_VFEHCR);
-
- /* Vertical */
- DispMode = !(video_height > BUZ_MAX_HEIGHT / 2);
- VidWinHt = DispMode ? video_height : video_height / 2;
- Y = DIV_ROUND_UP(VidWinHt * 64 * 2, tvn->Ha);
- He = (VidWinHt * 64) / Y;
- VerDcm = 64 - Y;
- vcrop1 = (tvn->Ha / 2 - He) / 2;
- vcrop2 = tvn->Ha / 2 - He - vcrop1;
- VStart = tvn->VStart;
- VEnd = VStart + tvn->Ha / 2; // - 1; FIXME SnapShot times out with -1 in 768*576 on the DC10 - LP
- VStart += vcrop1;
- VEnd -= vcrop2;
- reg = ((VStart & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VStart)
- | ((VEnd & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VEnd);
- if (zr->card.vfe_pol.vsync_pol)
- reg |= ZR36057_VFEVCR_VSPol;
- btwrite(reg, ZR36057_VFEVCR);
-
- /* scaler and pixel format */
- reg = 0;
- reg |= (HorDcm << ZR36057_VFESPFR_HorDcm);
- reg |= (VerDcm << ZR36057_VFESPFR_VerDcm);
- reg |= (DispMode << ZR36057_VFESPFR_DispMode);
- /* RJ: I don't know, why the following has to be the opposite
- * of the corresponding ZR36060 setting, but only this way
- * we get the correct colors when uncompressing to the screen */
- //reg |= ZR36057_VFESPFR_VCLKPol; /**/
- /* RJ: Don't know if that is needed for NTSC also */
- if (!(zr->norm & V4L2_STD_NTSC))
- reg |= ZR36057_VFESPFR_ExtFl; // NEEDED!!!!!!! Wolfgang
- reg |= ZR36057_VFESPFR_TopField;
- if (HorDcm >= 48) {
- reg |= 3 << ZR36057_VFESPFR_HFilter; /* 5 tap filter */
- } else if (HorDcm >= 32) {
- reg |= 2 << ZR36057_VFESPFR_HFilter; /* 4 tap filter */
- } else if (HorDcm >= 16) {
- reg |= 1 << ZR36057_VFESPFR_HFilter; /* 3 tap filter */
- }
- reg |= format->vfespfr;
- btwrite(reg, ZR36057_VFESPFR);
-
- /* display configuration */
- reg = (16 << ZR36057_VDCR_MinPix)
- | (VidWinHt << ZR36057_VDCR_VidWinHt)
- | (VidWinWid << ZR36057_VDCR_VidWinWid);
- if (pci_pci_problems & PCIPCI_TRITON)
- // || zr->revision < 1) // Revision 1 has also Triton support
- reg &= ~ZR36057_VDCR_Triton;
- else
- reg |= ZR36057_VDCR_Triton;
- btwrite(reg, ZR36057_VDCR);
-
- /* (Ronald) don't write this if overlay_mask = NULL */
- if (zr->overlay_mask) {
- /* Write overlay clipping mask data, but don't enable overlay clipping */
- /* RJ: since this makes only sense on the screen, we use
- * zr->overlay_settings.width instead of video_width */
-
- mask_line_size = (BUZ_MAX_WIDTH + 31) / 32;
- reg = virt_to_bus(zr->overlay_mask);
- btwrite(reg, ZR36057_MMTR);
- reg = virt_to_bus(zr->overlay_mask + mask_line_size);
- btwrite(reg, ZR36057_MMBR);
- reg =
- mask_line_size - (zr->overlay_settings.width +
- 31) / 32;
- if (DispMode == 0)
- reg += mask_line_size;
- reg <<= ZR36057_OCR_MaskStride;
- btwrite(reg, ZR36057_OCR);
- }
-
- zr36057_adjust_vfe(zr, zr->codec_mode);
-}
-
-/*
- * Switch overlay on or off
- */
-
-void
-zr36057_overlay (struct zoran *zr,
- int on)
-{
- u32 reg;
-
- if (on) {
- /* do the necessary settings ... */
- btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR); /* switch it off first */
-
- zr36057_set_vfe(zr,
- zr->overlay_settings.width,
- zr->overlay_settings.height,
- zr->overlay_settings.format);
-
- /* Start and length of each line MUST be 4-byte aligned.
- * This should be already checked before the call to this routine.
- * All error messages are internal driver checking only! */
-
- /* video display top and bottom registers */
- reg = (long) zr->vbuf_base +
- zr->overlay_settings.x *
- ((zr->overlay_settings.format->depth + 7) / 8) +
- zr->overlay_settings.y *
- zr->vbuf_bytesperline;
- btwrite(reg, ZR36057_VDTR);
- if (reg & 3)
- dprintk(1,
- KERN_ERR
- "%s: zr36057_overlay() - video_address not aligned\n",
- ZR_DEVNAME(zr));
- if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2)
- reg += zr->vbuf_bytesperline;
- btwrite(reg, ZR36057_VDBR);
-
- /* video stride, status, and frame grab register */
- reg = zr->vbuf_bytesperline -
- zr->overlay_settings.width *
- ((zr->overlay_settings.format->depth + 7) / 8);
- if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2)
- reg += zr->vbuf_bytesperline;
- if (reg & 3)
- dprintk(1,
- KERN_ERR
- "%s: zr36057_overlay() - video_stride not aligned\n",
- ZR_DEVNAME(zr));
- reg = (reg << ZR36057_VSSFGR_DispStride);
- reg |= ZR36057_VSSFGR_VidOvf; /* clear overflow status */
- btwrite(reg, ZR36057_VSSFGR);
-
- /* Set overlay clipping */
- if (zr->overlay_settings.clipcount > 0)
- btor(ZR36057_OCR_OvlEnable, ZR36057_OCR);
-
- /* ... and switch it on */
- btor(ZR36057_VDCR_VidEn, ZR36057_VDCR);
- } else {
- /* Switch it off */
- btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR);
- }
-}
-
-/*
- * The overlay mask has one bit for each pixel on a scan line,
- * and the maximum window size is BUZ_MAX_WIDTH * BUZ_MAX_HEIGHT pixels.
- */
-
-void write_overlay_mask(struct zoran_fh *fh, struct v4l2_clip *vp, int count)
-{
- struct zoran *zr = fh->zr;
- unsigned mask_line_size = (BUZ_MAX_WIDTH + 31) / 32;
- u32 *mask;
- int x, y, width, height;
- unsigned i, j, k;
-
- /* fill mask with one bits */
- memset(fh->overlay_mask, ~0, mask_line_size * 4 * BUZ_MAX_HEIGHT);
-
- for (i = 0; i < count; ++i) {
- /* pick up local copy of clip */
- x = vp[i].c.left;
- y = vp[i].c.top;
- width = vp[i].c.width;
- height = vp[i].c.height;
-
- /* trim clips that extend beyond the window */
- if (x < 0) {
- width += x;
- x = 0;
- }
- if (y < 0) {
- height += y;
- y = 0;
- }
- if (x + width > fh->overlay_settings.width) {
- width = fh->overlay_settings.width - x;
- }
- if (y + height > fh->overlay_settings.height) {
- height = fh->overlay_settings.height - y;
- }
-
- /* ignore degenerate clips */
- if (height <= 0) {
- continue;
- }
- if (width <= 0) {
- continue;
- }
-
- /* apply clip for each scan line */
- for (j = 0; j < height; ++j) {
- /* reset bit for each pixel */
- /* this can be optimized later if need be */
- mask = fh->overlay_mask + (y + j) * mask_line_size;
- for (k = 0; k < width; ++k) {
- mask[(x + k) / 32] &=
- ~((u32) 1 << (x + k) % 32);
- }
- }
- }
-}
-
-/* Enable/Disable uncompressed memory grabbing of the 36057 */
-
-void
-zr36057_set_memgrab (struct zoran *zr,
- int mode)
-{
- if (mode) {
- /* We only check SnapShot and not FrameGrab here. SnapShot==1
- * means a capture is already in progress, but FrameGrab==1
- * doesn't necessary mean that. It's more correct to say a 1
- * to 0 transition indicates a capture completed. If a
- * capture is pending when capturing is tuned off, FrameGrab
- * will be stuck at 1 until capturing is turned back on.
- */
- if (btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_SnapShot)
- dprintk(1,
- KERN_WARNING
- "%s: zr36057_set_memgrab(1) with SnapShot on!?\n",
- ZR_DEVNAME(zr));
-
- /* switch on VSync interrupts */
- btwrite(IRQ_MASK, ZR36057_ISR); // Clear Interrupts
- btor(zr->card.vsync_int, ZR36057_ICR); // SW
-
- /* enable SnapShot */
- btor(ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR);
-
- /* Set zr36057 video front end and enable video */
- zr36057_set_vfe(zr, zr->v4l_settings.width,
- zr->v4l_settings.height,
- zr->v4l_settings.format);
-
- zr->v4l_memgrab_active = 1;
- } else {
- /* switch off VSync interrupts */
- btand(~zr->card.vsync_int, ZR36057_ICR); // SW
-
- zr->v4l_memgrab_active = 0;
- zr->v4l_grab_frame = NO_GRAB_ACTIVE;
-
- /* re-enable grabbing to screen if it was running */
- if (zr->v4l_overlay_active) {
- zr36057_overlay(zr, 1);
- } else {
- btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR);
- btand(~ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR);
- }
- }
-}
-
-int
-wait_grab_pending (struct zoran *zr)
-{
- unsigned long flags;
-
- /* wait until all pending grabs are finished */
-
- if (!zr->v4l_memgrab_active)
- return 0;
-
- wait_event_interruptible(zr->v4l_capq,
- (zr->v4l_pend_tail == zr->v4l_pend_head));
- if (signal_pending(current))
- return -ERESTARTSYS;
-
- spin_lock_irqsave(&zr->spinlock, flags);
- zr36057_set_memgrab(zr, 0);
- spin_unlock_irqrestore(&zr->spinlock, flags);
-
- return 0;
-}
-
-/*****************************************************************************
- * *
- * Set up the Buz-specific MJPEG part *
- * *
- *****************************************************************************/
-
-static inline void
-set_frame (struct zoran *zr,
- int val)
-{
- GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_FRAME], val);
-}
-
-static void
-set_videobus_dir (struct zoran *zr,
- int val)
-{
- switch (zr->card.type) {
- case LML33:
- case LML33R10:
- if (!lml33dpath)
- GPIO(zr, 5, val);
- else
- GPIO(zr, 5, 1);
- break;
- default:
- GPIO(zr, zr->card.gpio[ZR_GPIO_VID_DIR],
- zr->card.gpio_pol[ZR_GPIO_VID_DIR] ? !val : val);
- break;
- }
-}
-
-static void
-init_jpeg_queue (struct zoran *zr)
-{
- int i;
-
- /* re-initialize DMA ring stuff */
- zr->jpg_que_head = 0;
- zr->jpg_dma_head = 0;
- zr->jpg_dma_tail = 0;
- zr->jpg_que_tail = 0;
- zr->jpg_seq_num = 0;
- zr->JPEG_error = 0;
- zr->num_errors = 0;
- zr->jpg_err_seq = 0;
- zr->jpg_err_shift = 0;
- zr->jpg_queued_num = 0;
- for (i = 0; i < zr->jpg_buffers.num_buffers; i++) {
- zr->jpg_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */
- }
- for (i = 0; i < BUZ_NUM_STAT_COM; i++) {
- zr->stat_com[i] = cpu_to_le32(1); /* mark as unavailable to zr36057 */
- }
-}
-
-static void
-zr36057_set_jpg (struct zoran *zr,
- enum zoran_codec_mode mode)
-{
- struct tvnorm *tvn;
- u32 reg;
-
- tvn = zr->timing;
-
- /* assert P_Reset, disable code transfer, deassert Active */
- btwrite(0, ZR36057_JPC);
-
- /* MJPEG compression mode */
- switch (mode) {
-
- case BUZ_MODE_MOTION_COMPRESS:
- default:
- reg = ZR36057_JMC_MJPGCmpMode;
- break;
-
- case BUZ_MODE_MOTION_DECOMPRESS:
- reg = ZR36057_JMC_MJPGExpMode;
- reg |= ZR36057_JMC_SyncMstr;
- /* RJ: The following is experimental - improves the output to screen */
- //if(zr->jpg_settings.VFIFO_FB) reg |= ZR36057_JMC_VFIFO_FB; // No, it doesn't. SM
- break;
-
- case BUZ_MODE_STILL_COMPRESS:
- reg = ZR36057_JMC_JPGCmpMode;
- break;
-
- case BUZ_MODE_STILL_DECOMPRESS:
- reg = ZR36057_JMC_JPGExpMode;
- break;
-
- }
- reg |= ZR36057_JMC_JPG;
- if (zr->jpg_settings.field_per_buff == 1)
- reg |= ZR36057_JMC_Fld_per_buff;
- btwrite(reg, ZR36057_JMC);
-
- /* vertical */
- btor(ZR36057_VFEVCR_VSPol, ZR36057_VFEVCR);
- reg = (6 << ZR36057_VSP_VsyncSize) |
- (tvn->Ht << ZR36057_VSP_FrmTot);
- btwrite(reg, ZR36057_VSP);
- reg = ((zr->jpg_settings.img_y + tvn->VStart) << ZR36057_FVAP_NAY) |
- (zr->jpg_settings.img_height << ZR36057_FVAP_PAY);
- btwrite(reg, ZR36057_FVAP);
-
- /* horizontal */
- if (zr->card.vfe_pol.hsync_pol)
- btor(ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
- else
- btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
- reg = ((tvn->HSyncStart) << ZR36057_HSP_HsyncStart) |
- (tvn->Wt << ZR36057_HSP_LineTot);
- btwrite(reg, ZR36057_HSP);
- reg = ((zr->jpg_settings.img_x +
- tvn->HStart + 4) << ZR36057_FHAP_NAX) |
- (zr->jpg_settings.img_width << ZR36057_FHAP_PAX);
- btwrite(reg, ZR36057_FHAP);
-
- /* field process parameters */
- if (zr->jpg_settings.odd_even)
- reg = ZR36057_FPP_Odd_Even;
- else
- reg = 0;
-
- btwrite(reg, ZR36057_FPP);
-
- /* Set proper VCLK Polarity, else colors will be wrong during playback */
- //btor(ZR36057_VFESPFR_VCLKPol, ZR36057_VFESPFR);
-
- /* code base address */
- reg = virt_to_bus(zr->stat_com);
- btwrite(reg, ZR36057_JCBA);
-
- /* FIFO threshold (FIFO is 160. double words) */
- /* NOTE: decimal values here */
- switch (mode) {
-
- case BUZ_MODE_STILL_COMPRESS:
- case BUZ_MODE_MOTION_COMPRESS:
- if (zr->card.type != BUZ)
- reg = 140;
- else
- reg = 60;
- break;
-
- case BUZ_MODE_STILL_DECOMPRESS:
- case BUZ_MODE_MOTION_DECOMPRESS:
- reg = 20;
- break;
-
- default:
- reg = 80;
- break;
-
- }
- btwrite(reg, ZR36057_JCFT);
- zr36057_adjust_vfe(zr, mode);
-
-}
-
-void
-print_interrupts (struct zoran *zr)
-{
- int res, noerr = 0;
-
- printk(KERN_INFO "%s: interrupts received:", ZR_DEVNAME(zr));
- if ((res = zr->field_counter) < -1 || res > 1) {
- printk(KERN_CONT " FD:%d", res);
- }
- if ((res = zr->intr_counter_GIRQ1) != 0) {
- printk(KERN_CONT " GIRQ1:%d", res);
- noerr++;
- }
- if ((res = zr->intr_counter_GIRQ0) != 0) {
- printk(KERN_CONT " GIRQ0:%d", res);
- noerr++;
- }
- if ((res = zr->intr_counter_CodRepIRQ) != 0) {
- printk(KERN_CONT " CodRepIRQ:%d", res);
- noerr++;
- }
- if ((res = zr->intr_counter_JPEGRepIRQ) != 0) {
- printk(KERN_CONT " JPEGRepIRQ:%d", res);
- noerr++;
- }
- if (zr->JPEG_max_missed) {
- printk(KERN_CONT " JPEG delays: max=%d min=%d", zr->JPEG_max_missed,
- zr->JPEG_min_missed);
- }
- if (zr->END_event_missed) {
- printk(KERN_CONT " ENDs missed: %d", zr->END_event_missed);
- }
- //if (zr->jpg_queued_num) {
- printk(KERN_CONT " queue_state=%ld/%ld/%ld/%ld", zr->jpg_que_tail,
- zr->jpg_dma_tail, zr->jpg_dma_head, zr->jpg_que_head);
- //}
- if (!noerr) {
- printk(KERN_CONT ": no interrupts detected.");
- }
- printk(KERN_CONT "\n");
-}
-
-void
-clear_interrupt_counters (struct zoran *zr)
-{
- zr->intr_counter_GIRQ1 = 0;
- zr->intr_counter_GIRQ0 = 0;
- zr->intr_counter_CodRepIRQ = 0;
- zr->intr_counter_JPEGRepIRQ = 0;
- zr->field_counter = 0;
- zr->IRQ1_in = 0;
- zr->IRQ1_out = 0;
- zr->JPEG_in = 0;
- zr->JPEG_out = 0;
- zr->JPEG_0 = 0;
- zr->JPEG_1 = 0;
- zr->END_event_missed = 0;
- zr->JPEG_missed = 0;
- zr->JPEG_max_missed = 0;
- zr->JPEG_min_missed = 0x7fffffff;
-}
-
-static u32
-count_reset_interrupt (struct zoran *zr)
-{
- u32 isr;
-
- if ((isr = btread(ZR36057_ISR) & 0x78000000)) {
- if (isr & ZR36057_ISR_GIRQ1) {
- btwrite(ZR36057_ISR_GIRQ1, ZR36057_ISR);
- zr->intr_counter_GIRQ1++;
- }
- if (isr & ZR36057_ISR_GIRQ0) {
- btwrite(ZR36057_ISR_GIRQ0, ZR36057_ISR);
- zr->intr_counter_GIRQ0++;
- }
- if (isr & ZR36057_ISR_CodRepIRQ) {
- btwrite(ZR36057_ISR_CodRepIRQ, ZR36057_ISR);
- zr->intr_counter_CodRepIRQ++;
- }
- if (isr & ZR36057_ISR_JPEGRepIRQ) {
- btwrite(ZR36057_ISR_JPEGRepIRQ, ZR36057_ISR);
- zr->intr_counter_JPEGRepIRQ++;
- }
- }
- return isr;
-}
-
-void
-jpeg_start (struct zoran *zr)
-{
- int reg;
-
- zr->frame_num = 0;
-
- /* deassert P_reset, disable code transfer, deassert Active */
- btwrite(ZR36057_JPC_P_Reset, ZR36057_JPC);
- /* stop flushing the internal code buffer */
- btand(~ZR36057_MCTCR_CFlush, ZR36057_MCTCR);
- /* enable code transfer */
- btor(ZR36057_JPC_CodTrnsEn, ZR36057_JPC);
-
- /* clear IRQs */
- btwrite(IRQ_MASK, ZR36057_ISR);
- /* enable the JPEG IRQs */
- btwrite(zr->card.jpeg_int |
- ZR36057_ICR_JPEGRepIRQ |
- ZR36057_ICR_IntPinEn,
- ZR36057_ICR);
-
- set_frame(zr, 0); // \FRAME
-
- /* set the JPEG codec guest ID */
- reg = (zr->card.gpcs[1] << ZR36057_JCGI_JPEGuestID) |
- (0 << ZR36057_JCGI_JPEGuestReg);
- btwrite(reg, ZR36057_JCGI);
-
- if (zr->card.video_vfe == CODEC_TYPE_ZR36016 &&
- zr->card.video_codec == CODEC_TYPE_ZR36050) {
- /* Enable processing on the ZR36016 */
- if (zr->vfe)
- zr36016_write(zr->vfe, 0, 1);
-
- /* load the address of the GO register in the ZR36050 latch */
- post_office_write(zr, 0, 0, 0);
- }
-
- /* assert Active */
- btor(ZR36057_JPC_Active, ZR36057_JPC);
-
- /* enable the Go generation */
- btor(ZR36057_JMC_Go_en, ZR36057_JMC);
- udelay(30);
-
- set_frame(zr, 1); // /FRAME
-
- dprintk(3, KERN_DEBUG "%s: jpeg_start\n", ZR_DEVNAME(zr));
-}
-
-void
-zr36057_enable_jpg (struct zoran *zr,
- enum zoran_codec_mode mode)
-{
- struct vfe_settings cap;
- int field_size =
- zr->jpg_buffers.buffer_size / zr->jpg_settings.field_per_buff;
-
- zr->codec_mode = mode;
-
- cap.x = zr->jpg_settings.img_x;
- cap.y = zr->jpg_settings.img_y;
- cap.width = zr->jpg_settings.img_width;
- cap.height = zr->jpg_settings.img_height;
- cap.decimation =
- zr->jpg_settings.HorDcm | (zr->jpg_settings.VerDcm << 8);
- cap.quality = zr->jpg_settings.jpg_comp.quality;
-
- switch (mode) {
-
- case BUZ_MODE_MOTION_COMPRESS: {
- struct jpeg_app_marker app;
- struct jpeg_com_marker com;
-
- /* In motion compress mode, the decoder output must be enabled, and
- * the video bus direction set to input.
- */
- set_videobus_dir(zr, 0);
- decoder_call(zr, video, s_stream, 1);
- encoder_call(zr, video, s_routing, 0, 0, 0);
-
- /* Take the JPEG codec and the VFE out of sleep */
- jpeg_codec_sleep(zr, 0);
-
- /* set JPEG app/com marker */
- app.appn = zr->jpg_settings.jpg_comp.APPn;
- app.len = zr->jpg_settings.jpg_comp.APP_len;
- memcpy(app.data, zr->jpg_settings.jpg_comp.APP_data, 60);
- zr->codec->control(zr->codec, CODEC_S_JPEG_APP_DATA,
- sizeof(struct jpeg_app_marker), &app);
-
- com.len = zr->jpg_settings.jpg_comp.COM_len;
- memcpy(com.data, zr->jpg_settings.jpg_comp.COM_data, 60);
- zr->codec->control(zr->codec, CODEC_S_JPEG_COM_DATA,
- sizeof(struct jpeg_com_marker), &com);
-
- /* Setup the JPEG codec */
- zr->codec->control(zr->codec, CODEC_S_JPEG_TDS_BYTE,
- sizeof(int), &field_size);
- zr->codec->set_video(zr->codec, zr->timing, &cap,
- &zr->card.vfe_pol);
- zr->codec->set_mode(zr->codec, CODEC_DO_COMPRESSION);
-
- /* Setup the VFE */
- if (zr->vfe) {
- zr->vfe->control(zr->vfe, CODEC_S_JPEG_TDS_BYTE,
- sizeof(int), &field_size);
- zr->vfe->set_video(zr->vfe, zr->timing, &cap,
- &zr->card.vfe_pol);
- zr->vfe->set_mode(zr->vfe, CODEC_DO_COMPRESSION);
- }
-
- init_jpeg_queue(zr);
- zr36057_set_jpg(zr, mode); // \P_Reset, ... Video param, FIFO
-
- clear_interrupt_counters(zr);
- dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_COMPRESS)\n",
- ZR_DEVNAME(zr));
- break;
- }
-
- case BUZ_MODE_MOTION_DECOMPRESS:
- /* In motion decompression mode, the decoder output must be disabled, and
- * the video bus direction set to output.
- */
- decoder_call(zr, video, s_stream, 0);
- set_videobus_dir(zr, 1);
- encoder_call(zr, video, s_routing, 1, 0, 0);
-
- /* Take the JPEG codec and the VFE out of sleep */
- jpeg_codec_sleep(zr, 0);
- /* Setup the VFE */
- if (zr->vfe) {
- zr->vfe->set_video(zr->vfe, zr->timing, &cap,
- &zr->card.vfe_pol);
- zr->vfe->set_mode(zr->vfe, CODEC_DO_EXPANSION);
- }
- /* Setup the JPEG codec */
- zr->codec->set_video(zr->codec, zr->timing, &cap,
- &zr->card.vfe_pol);
- zr->codec->set_mode(zr->codec, CODEC_DO_EXPANSION);
-
- init_jpeg_queue(zr);
- zr36057_set_jpg(zr, mode); // \P_Reset, ... Video param, FIFO
-
- clear_interrupt_counters(zr);
- dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_DECOMPRESS)\n",
- ZR_DEVNAME(zr));
- break;
-
- case BUZ_MODE_IDLE:
- default:
- /* shut down processing */
- btand(~(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ),
- ZR36057_ICR);
- btwrite(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ,
- ZR36057_ISR);
- btand(~ZR36057_JMC_Go_en, ZR36057_JMC); // \Go_en
-
- msleep(50);
-
- set_videobus_dir(zr, 0);
- set_frame(zr, 1); // /FRAME
- btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR); // /CFlush
- btwrite(0, ZR36057_JPC); // \P_Reset,\CodTrnsEn,\Active
- btand(~ZR36057_JMC_VFIFO_FB, ZR36057_JMC);
- btand(~ZR36057_JMC_SyncMstr, ZR36057_JMC);
- jpeg_codec_reset(zr);
- jpeg_codec_sleep(zr, 1);
- zr36057_adjust_vfe(zr, mode);
-
- decoder_call(zr, video, s_stream, 1);
- encoder_call(zr, video, s_routing, 0, 0, 0);
-
- dprintk(2, KERN_INFO "%s: enable_jpg(IDLE)\n", ZR_DEVNAME(zr));
- break;
-
- }
-}
-
-/* when this is called the spinlock must be held */
-void
-zoran_feed_stat_com (struct zoran *zr)
-{
- /* move frames from pending queue to DMA */
-
- int frame, i, max_stat_com;
-
- max_stat_com =
- (zr->jpg_settings.TmpDcm ==
- 1) ? BUZ_NUM_STAT_COM : (BUZ_NUM_STAT_COM >> 1);
-
- while ((zr->jpg_dma_head - zr->jpg_dma_tail) < max_stat_com &&
- zr->jpg_dma_head < zr->jpg_que_head) {
-
- frame = zr->jpg_pend[zr->jpg_dma_head & BUZ_MASK_FRAME];
- if (zr->jpg_settings.TmpDcm == 1) {
- /* fill 1 stat_com entry */
- i = (zr->jpg_dma_head -
- zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
- if (!(zr->stat_com[i] & cpu_to_le32(1)))
- break;
- zr->stat_com[i] =
- cpu_to_le32(zr->jpg_buffers.buffer[frame].jpg.frag_tab_bus);
- } else {
- /* fill 2 stat_com entries */
- i = ((zr->jpg_dma_head -
- zr->jpg_err_shift) & 1) * 2;
- if (!(zr->stat_com[i] & cpu_to_le32(1)))
- break;
- zr->stat_com[i] =
- cpu_to_le32(zr->jpg_buffers.buffer[frame].jpg.frag_tab_bus);
- zr->stat_com[i + 1] =
- cpu_to_le32(zr->jpg_buffers.buffer[frame].jpg.frag_tab_bus);
- }
- zr->jpg_buffers.buffer[frame].state = BUZ_STATE_DMA;
- zr->jpg_dma_head++;
-
- }
- if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS)
- zr->jpg_queued_num++;
-}
-
-/* when this is called the spinlock must be held */
-static void
-zoran_reap_stat_com (struct zoran *zr)
-{
- /* move frames from DMA queue to done queue */
-
- int i;
- u32 stat_com;
- unsigned int seq;
- unsigned int dif;
- struct zoran_buffer *buffer;
- int frame;
-
- /* In motion decompress we don't have a hardware frame counter,
- * we just count the interrupts here */
-
- if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) {
- zr->jpg_seq_num++;
- }
- while (zr->jpg_dma_tail < zr->jpg_dma_head) {
- if (zr->jpg_settings.TmpDcm == 1)
- i = (zr->jpg_dma_tail -
- zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
- else
- i = ((zr->jpg_dma_tail -
- zr->jpg_err_shift) & 1) * 2 + 1;
-
- stat_com = le32_to_cpu(zr->stat_com[i]);
-
- if ((stat_com & 1) == 0) {
- return;
- }
- frame = zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME];
- buffer = &zr->jpg_buffers.buffer[frame];
- buffer->bs.ts = ktime_get_ns();
-
- if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
- buffer->bs.length = (stat_com & 0x7fffff) >> 1;
-
- /* update sequence number with the help of the counter in stat_com */
-
- seq = ((stat_com >> 24) + zr->jpg_err_seq) & 0xff;
- dif = (seq - zr->jpg_seq_num) & 0xff;
- zr->jpg_seq_num += dif;
- } else {
- buffer->bs.length = 0;
- }
- buffer->bs.seq =
- zr->jpg_settings.TmpDcm ==
- 2 ? (zr->jpg_seq_num >> 1) : zr->jpg_seq_num;
- buffer->state = BUZ_STATE_DONE;
-
- zr->jpg_dma_tail++;
- }
-}
-
-static void zoran_restart(struct zoran *zr)
-{
- /* Now the stat_comm buffer is ready for restart */
- unsigned int status = 0;
- int mode;
-
- if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
- decoder_call(zr, video, g_input_status, &status);
- mode = CODEC_DO_COMPRESSION;
- } else {
- status = V4L2_IN_ST_NO_SIGNAL;
- mode = CODEC_DO_EXPANSION;
- }
- if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS ||
- !(status & V4L2_IN_ST_NO_SIGNAL)) {
- /********** RESTART code *************/
- jpeg_codec_reset(zr);
- zr->codec->set_mode(zr->codec, mode);
- zr36057_set_jpg(zr, zr->codec_mode);
- jpeg_start(zr);
-
- if (zr->num_errors <= 8)
- dprintk(2, KERN_INFO "%s: Restart\n",
- ZR_DEVNAME(zr));
-
- zr->JPEG_missed = 0;
- zr->JPEG_error = 2;
- /********** End RESTART code ***********/
- }
-}
-
-static void
-error_handler (struct zoran *zr,
- u32 astat,
- u32 stat)
-{
- int i;
-
- /* This is JPEG error handling part */
- if (zr->codec_mode != BUZ_MODE_MOTION_COMPRESS &&
- zr->codec_mode != BUZ_MODE_MOTION_DECOMPRESS) {
- return;
- }
-
- if ((stat & 1) == 0 &&
- zr->codec_mode == BUZ_MODE_MOTION_COMPRESS &&
- zr->jpg_dma_tail - zr->jpg_que_tail >= zr->jpg_buffers.num_buffers) {
- /* No free buffers... */
- zoran_reap_stat_com(zr);
- zoran_feed_stat_com(zr);
- wake_up_interruptible(&zr->jpg_capq);
- zr->JPEG_missed = 0;
- return;
- }
-
- if (zr->JPEG_error == 1) {
- zoran_restart(zr);
- return;
- }
-
- /*
- * First entry: error just happened during normal operation
- *
- * In BUZ_MODE_MOTION_COMPRESS:
- *
- * Possible glitch in TV signal. In this case we should
- * stop the codec and wait for good quality signal before
- * restarting it to avoid further problems
- *
- * In BUZ_MODE_MOTION_DECOMPRESS:
- *
- * Bad JPEG frame: we have to mark it as processed (codec crashed
- * and was not able to do it itself), and to remove it from queue.
- */
- btand(~ZR36057_JMC_Go_en, ZR36057_JMC);
- udelay(1);
- stat = stat | (post_office_read(zr, 7, 0) & 3) << 8;
- btwrite(0, ZR36057_JPC);
- btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR);
- jpeg_codec_reset(zr);
- jpeg_codec_sleep(zr, 1);
- zr->JPEG_error = 1;
- zr->num_errors++;
-
- /* Report error */
- if (zr36067_debug > 1 && zr->num_errors <= 8) {
- long frame;
- int j;
-
- frame = zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME];
- printk(KERN_ERR
- "%s: JPEG error stat=0x%08x(0x%08x) queue_state=%ld/%ld/%ld/%ld seq=%ld frame=%ld. Codec stopped. ",
- ZR_DEVNAME(zr), stat, zr->last_isr,
- zr->jpg_que_tail, zr->jpg_dma_tail,
- zr->jpg_dma_head, zr->jpg_que_head,
- zr->jpg_seq_num, frame);
- printk(KERN_INFO "stat_com frames:");
- for (j = 0; j < BUZ_NUM_STAT_COM; j++) {
- for (i = 0; i < zr->jpg_buffers.num_buffers; i++) {
- if (le32_to_cpu(zr->stat_com[j]) == zr->jpg_buffers.buffer[i].jpg.frag_tab_bus)
- printk(KERN_CONT "% d->%d", j, i);
- }
- }
- printk(KERN_CONT "\n");
- }
- /* Find an entry in stat_com and rotate contents */
- if (zr->jpg_settings.TmpDcm == 1)
- i = (zr->jpg_dma_tail - zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
- else
- i = ((zr->jpg_dma_tail - zr->jpg_err_shift) & 1) * 2;
- if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) {
- /* Mimic zr36067 operation */
- zr->stat_com[i] |= cpu_to_le32(1);
- if (zr->jpg_settings.TmpDcm != 1)
- zr->stat_com[i + 1] |= cpu_to_le32(1);
- /* Refill */
- zoran_reap_stat_com(zr);
- zoran_feed_stat_com(zr);
- wake_up_interruptible(&zr->jpg_capq);
- /* Find an entry in stat_com again after refill */
- if (zr->jpg_settings.TmpDcm == 1)
- i = (zr->jpg_dma_tail - zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
- else
- i = ((zr->jpg_dma_tail - zr->jpg_err_shift) & 1) * 2;
- }
- if (i) {
- /* Rotate stat_comm entries to make current entry first */
- int j;
- __le32 bus_addr[BUZ_NUM_STAT_COM];
-
- /* Here we are copying the stat_com array, which
- * is already in little endian format, so
- * no endian conversions here
- */
- memcpy(bus_addr, zr->stat_com, sizeof(bus_addr));
-
- for (j = 0; j < BUZ_NUM_STAT_COM; j++)
- zr->stat_com[j] = bus_addr[(i + j) & BUZ_MASK_STAT_COM];
-
- zr->jpg_err_shift += i;
- zr->jpg_err_shift &= BUZ_MASK_STAT_COM;
- }
- if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS)
- zr->jpg_err_seq = zr->jpg_seq_num; /* + 1; */
- zoran_restart(zr);
-}
-
-irqreturn_t
-zoran_irq (int irq,
- void *dev_id)
-{
- u32 stat, astat;
- int count;
- struct zoran *zr;
- unsigned long flags;
-
- zr = dev_id;
- count = 0;
-
- if (zr->testing) {
- /* Testing interrupts */
- spin_lock_irqsave(&zr->spinlock, flags);
- while ((stat = count_reset_interrupt(zr))) {
- if (count++ > 100) {
- btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR);
- dprintk(1,
- KERN_ERR
- "%s: IRQ lockup while testing, isr=0x%08x, cleared int mask\n",
- ZR_DEVNAME(zr), stat);
- wake_up_interruptible(&zr->test_q);
- }
- }
- zr->last_isr = stat;
- spin_unlock_irqrestore(&zr->spinlock, flags);
- return IRQ_HANDLED;
- }
-
- spin_lock_irqsave(&zr->spinlock, flags);
- while (1) {
- /* get/clear interrupt status bits */
- stat = count_reset_interrupt(zr);
- astat = stat & IRQ_MASK;
- if (!astat) {
- break;
- }
- dprintk(4,
- KERN_DEBUG
- "zoran_irq: astat: 0x%08x, mask: 0x%08x\n",
- astat, btread(ZR36057_ICR));
- if (astat & zr->card.vsync_int) { // SW
-
- if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS ||
- zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
- /* count missed interrupts */
- zr->JPEG_missed++;
- }
- //post_office_read(zr,1,0);
- /* Interrupts may still happen when
- * zr->v4l_memgrab_active is switched off.
- * We simply ignore them */
-
- if (zr->v4l_memgrab_active) {
- /* A lot more checks should be here ... */
- if ((btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_SnapShot) == 0)
- dprintk(1,
- KERN_WARNING
- "%s: BuzIRQ with SnapShot off ???\n",
- ZR_DEVNAME(zr));
-
- if (zr->v4l_grab_frame != NO_GRAB_ACTIVE) {
- /* There is a grab on a frame going on, check if it has finished */
- if ((btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_FrameGrab) == 0) {
- /* it is finished, notify the user */
-
- zr->v4l_buffers.buffer[zr->v4l_grab_frame].state = BUZ_STATE_DONE;
- zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.seq = zr->v4l_grab_seq;
- zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.ts = ktime_get_ns();
- zr->v4l_grab_frame = NO_GRAB_ACTIVE;
- zr->v4l_pend_tail++;
- }
- }
-
- if (zr->v4l_grab_frame == NO_GRAB_ACTIVE)
- wake_up_interruptible(&zr->v4l_capq);
-
- /* Check if there is another grab queued */
-
- if (zr->v4l_grab_frame == NO_GRAB_ACTIVE &&
- zr->v4l_pend_tail != zr->v4l_pend_head) {
- int frame = zr->v4l_pend[zr->v4l_pend_tail & V4L_MASK_FRAME];
- u32 reg;
-
- zr->v4l_grab_frame = frame;
-
- /* Set zr36057 video front end and enable video */
-
- /* Buffer address */
-
- reg = zr->v4l_buffers.buffer[frame].v4l.fbuffer_bus;
- btwrite(reg, ZR36057_VDTR);
- if (zr->v4l_settings.height > BUZ_MAX_HEIGHT / 2)
- reg += zr->v4l_settings.bytesperline;
- btwrite(reg, ZR36057_VDBR);
-
- /* video stride, status, and frame grab register */
- reg = 0;
- if (zr->v4l_settings.height > BUZ_MAX_HEIGHT / 2)
- reg += zr->v4l_settings.bytesperline;
- reg = (reg << ZR36057_VSSFGR_DispStride);
- reg |= ZR36057_VSSFGR_VidOvf;
- reg |= ZR36057_VSSFGR_SnapShot;
- reg |= ZR36057_VSSFGR_FrameGrab;
- btwrite(reg, ZR36057_VSSFGR);
-
- btor(ZR36057_VDCR_VidEn,
- ZR36057_VDCR);
- }
- }
-
- /* even if we don't grab, we do want to increment
- * the sequence counter to see lost frames */
- zr->v4l_grab_seq++;
- }
-#if (IRQ_MASK & ZR36057_ISR_CodRepIRQ)
- if (astat & ZR36057_ISR_CodRepIRQ) {
- zr->intr_counter_CodRepIRQ++;
- IDEBUG(printk(KERN_DEBUG "%s: ZR36057_ISR_CodRepIRQ\n",
- ZR_DEVNAME(zr)));
- btand(~ZR36057_ICR_CodRepIRQ, ZR36057_ICR);
- }
-#endif /* (IRQ_MASK & ZR36057_ISR_CodRepIRQ) */
-
-#if (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ)
- if ((astat & ZR36057_ISR_JPEGRepIRQ) &&
- (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS ||
- zr->codec_mode == BUZ_MODE_MOTION_COMPRESS)) {
- if (zr36067_debug > 1 && (!zr->frame_num || zr->JPEG_error)) {
- char sv[BUZ_NUM_STAT_COM + 1];
- int i;
-
- printk(KERN_INFO
- "%s: first frame ready: state=0x%08x odd_even=%d field_per_buff=%d delay=%d\n",
- ZR_DEVNAME(zr), stat,
- zr->jpg_settings.odd_even,
- zr->jpg_settings.field_per_buff,
- zr->JPEG_missed);
-
- for (i = 0; i < BUZ_NUM_STAT_COM; i++)
- sv[i] = le32_to_cpu(zr->stat_com[i]) & 1 ? '1' : '0';
- sv[BUZ_NUM_STAT_COM] = 0;
- printk(KERN_INFO
- "%s: stat_com=%s queue_state=%ld/%ld/%ld/%ld\n",
- ZR_DEVNAME(zr), sv,
- zr->jpg_que_tail,
- zr->jpg_dma_tail,
- zr->jpg_dma_head,
- zr->jpg_que_head);
- } else {
- /* Get statistics */
- if (zr->JPEG_missed > zr->JPEG_max_missed)
- zr->JPEG_max_missed = zr->JPEG_missed;
- if (zr->JPEG_missed < zr->JPEG_min_missed)
- zr->JPEG_min_missed = zr->JPEG_missed;
- }
-
- if (zr36067_debug > 2 && zr->frame_num < 6) {
- int i;
-
- printk(KERN_INFO "%s: seq=%ld stat_com:",
- ZR_DEVNAME(zr), zr->jpg_seq_num);
- for (i = 0; i < 4; i++) {
- printk(KERN_CONT " %08x",
- le32_to_cpu(zr->stat_com[i]));
- }
- printk(KERN_CONT "\n");
- }
- zr->frame_num++;
- zr->JPEG_missed = 0;
- zr->JPEG_error = 0;
- zoran_reap_stat_com(zr);
- zoran_feed_stat_com(zr);
- wake_up_interruptible(&zr->jpg_capq);
- }
-#endif /* (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ) */
-
- /* DATERR, too many fields missed, error processing */
- if ((astat & zr->card.jpeg_int) ||
- zr->JPEG_missed > 25 ||
- zr->JPEG_error == 1 ||
- ((zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) &&
- (zr->frame_num && (zr->JPEG_missed > zr->jpg_settings.field_per_buff)))) {
- error_handler(zr, astat, stat);
- }
-
- count++;
- if (count > 10) {
- dprintk(2, KERN_WARNING "%s: irq loop %d\n",
- ZR_DEVNAME(zr), count);
- if (count > 20) {
- btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR);
- dprintk(2,
- KERN_ERR
- "%s: IRQ lockup, cleared int mask\n",
- ZR_DEVNAME(zr));
- break;
- }
- }
- zr->last_isr = stat;
- }
- spin_unlock_irqrestore(&zr->spinlock, flags);
-
- return IRQ_HANDLED;
-}
-
-void
-zoran_set_pci_master (struct zoran *zr,
- int set_master)
-{
- if (set_master) {
- pci_set_master(zr->pci_dev);
- } else {
- u16 command;
-
- pci_read_config_word(zr->pci_dev, PCI_COMMAND, &command);
- command &= ~PCI_COMMAND_MASTER;
- pci_write_config_word(zr->pci_dev, PCI_COMMAND, command);
- }
-}
-
-void
-zoran_init_hardware (struct zoran *zr)
-{
- /* Enable bus-mastering */
- zoran_set_pci_master(zr, 1);
-
- /* Initialize the board */
- if (zr->card.init) {
- zr->card.init(zr);
- }
-
- decoder_call(zr, core, init, 0);
- decoder_call(zr, video, s_std, zr->norm);
- decoder_call(zr, video, s_routing,
- zr->card.input[zr->input].muxsel, 0, 0);
-
- encoder_call(zr, core, init, 0);
- encoder_call(zr, video, s_std_output, zr->norm);
- encoder_call(zr, video, s_routing, 0, 0, 0);
-
- /* toggle JPEG codec sleep to sync PLL */
- jpeg_codec_sleep(zr, 1);
- jpeg_codec_sleep(zr, 0);
-
- /*
- * set individual interrupt enables (without GIRQ1)
- * but don't global enable until zoran_open()
- */
- zr36057_init_vfe(zr);
-
- zr36057_enable_jpg(zr, BUZ_MODE_IDLE);
-
- btwrite(IRQ_MASK, ZR36057_ISR); // Clears interrupts
-}
-
-void
-zr36057_restart (struct zoran *zr)
-{
- btwrite(0, ZR36057_SPGPPCR);
- mdelay(1);
- btor(ZR36057_SPGPPCR_SoftReset, ZR36057_SPGPPCR);
- mdelay(1);
-
- /* assert P_Reset */
- btwrite(0, ZR36057_JPC);
- /* set up GPIO direction - all output */
- btwrite(ZR36057_SPGPPCR_SoftReset | 0, ZR36057_SPGPPCR);
-
- /* set up GPIO pins and guest bus timing */
- btwrite((0x81 << 24) | 0x8888, ZR36057_GPPGCR1);
-}
-
-/*
- * initialize video front end
- */
-
-static void
-zr36057_init_vfe (struct zoran *zr)
-{
- u32 reg;
-
- reg = btread(ZR36057_VFESPFR);
- reg |= ZR36057_VFESPFR_LittleEndian;
- reg &= ~ZR36057_VFESPFR_VCLKPol;
- reg |= ZR36057_VFESPFR_ExtFl;
- reg |= ZR36057_VFESPFR_TopField;
- btwrite(reg, ZR36057_VFESPFR);
- reg = btread(ZR36057_VDCR);
- if (pci_pci_problems & PCIPCI_TRITON)
- // || zr->revision < 1) // Revision 1 has also Triton support
- reg &= ~ZR36057_VDCR_Triton;
- else
- reg |= ZR36057_VDCR_Triton;
- btwrite(reg, ZR36057_VDCR);
-}
+++ /dev/null
-/*
- * Zoran zr36057/zr36067 PCI controller driver, for the
- * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux
- * Media Labs LML33/LML33R10.
- *
- * This part handles card-specific data and detection
- *
- * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
- *
- * Currently maintained by:
- * Ronald Bultje <rbultje@ronald.bitfreak.net>
- * Laurent Pinchart <laurent.pinchart@skynet.be>
- * Mailinglist <mjpeg-users@lists.sf.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ZORAN_DEVICE_H__
-#define __ZORAN_DEVICE_H__
-
-/* general purpose I/O */
-extern void GPIO(struct zoran *zr,
- int bit,
- unsigned int value);
-
-/* codec (or actually: guest bus) access */
-extern int post_office_wait(struct zoran *zr);
-extern int post_office_write(struct zoran *zr,
- unsigned guest,
- unsigned reg,
- unsigned value);
-extern int post_office_read(struct zoran *zr,
- unsigned guest,
- unsigned reg);
-
-extern void detect_guest_activity(struct zoran *zr);
-
-extern void jpeg_codec_sleep(struct zoran *zr,
- int sleep);
-extern int jpeg_codec_reset(struct zoran *zr);
-
-/* zr360x7 access to raw capture */
-extern void zr36057_overlay(struct zoran *zr,
- int on);
-extern void write_overlay_mask(struct zoran_fh *fh,
- struct v4l2_clip *vp,
- int count);
-extern void zr36057_set_memgrab(struct zoran *zr,
- int mode);
-extern int wait_grab_pending(struct zoran *zr);
-
-/* interrupts */
-extern void print_interrupts(struct zoran *zr);
-extern void clear_interrupt_counters(struct zoran *zr);
-extern irqreturn_t zoran_irq(int irq, void *dev_id);
-
-/* JPEG codec access */
-extern void jpeg_start(struct zoran *zr);
-extern void zr36057_enable_jpg(struct zoran *zr,
- enum zoran_codec_mode mode);
-extern void zoran_feed_stat_com(struct zoran *zr);
-
-/* general */
-extern void zoran_set_pci_master(struct zoran *zr,
- int set_master);
-extern void zoran_init_hardware(struct zoran *zr);
-extern void zr36057_restart(struct zoran *zr);
-
-extern const struct zoran_format zoran_formats[];
-
-extern int v4l_nbufs;
-extern int v4l_bufsize;
-extern int jpg_nbufs;
-extern int jpg_bufsize;
-extern int pass_through;
-
-/* i2c */
-#define decoder_call(zr, o, f, args...) \
- v4l2_subdev_call(zr->decoder, o, f, ##args)
-#define encoder_call(zr, o, f, args...) \
- v4l2_subdev_call(zr->encoder, o, f, ##args)
-
-#endif /* __ZORAN_DEVICE_H__ */
+++ /dev/null
-/*
- * Zoran zr36057/zr36067 PCI controller driver, for the
- * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux
- * Media Labs LML33/LML33R10.
- *
- * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
- *
- * Changes for BUZ by Wolfgang Scherr <scherr@net4you.net>
- *
- * Changes for DC10/DC30 by Laurent Pinchart <laurent.pinchart@skynet.be>
- *
- * Changes for LML33R10 by Maxim Yevtyushkin <max@linuxmedialabs.com>
- *
- * Changes for videodev2/v4l2 by Ronald Bultje <rbultje@ronald.bitfreak.net>
- *
- * Based on
- *
- * Miro DC10 driver
- * Copyright (C) 1999 Wolfgang Scherr <scherr@net4you.net>
- *
- * Iomega Buz driver version 1.0
- * Copyright (C) 1999 Rainer Johanni <Rainer@Johanni.de>
- *
- * buz.0.0.3
- * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
- *
- * bttv - Bt848 frame grabber driver
- * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
- * & Marcus Metzler (mocm@thp.uni-koeln.de)
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/vmalloc.h>
-#include <linux/wait.h>
-
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-
-#include <linux/spinlock.h>
-
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-event.h>
-#include "videocodec.h"
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <linux/proc_fs.h>
-
-#include <linux/mutex.h>
-#include "zoran.h"
-#include "zoran_device.h"
-#include "zoran_card.h"
-
-
-const struct zoran_format zoran_formats[] = {
- {
- .name = "15-bit RGB LE",
- .fourcc = V4L2_PIX_FMT_RGB555,
- .colorspace = V4L2_COLORSPACE_SRGB,
- .depth = 15,
- .flags = ZORAN_FORMAT_CAPTURE |
- ZORAN_FORMAT_OVERLAY,
- .vfespfr = ZR36057_VFESPFR_RGB555|ZR36057_VFESPFR_ErrDif|
- ZR36057_VFESPFR_LittleEndian,
- }, {
- .name = "15-bit RGB BE",
- .fourcc = V4L2_PIX_FMT_RGB555X,
- .colorspace = V4L2_COLORSPACE_SRGB,
- .depth = 15,
- .flags = ZORAN_FORMAT_CAPTURE |
- ZORAN_FORMAT_OVERLAY,
- .vfespfr = ZR36057_VFESPFR_RGB555|ZR36057_VFESPFR_ErrDif,
- }, {
- .name = "16-bit RGB LE",
- .fourcc = V4L2_PIX_FMT_RGB565,
- .colorspace = V4L2_COLORSPACE_SRGB,
- .depth = 16,
- .flags = ZORAN_FORMAT_CAPTURE |
- ZORAN_FORMAT_OVERLAY,
- .vfespfr = ZR36057_VFESPFR_RGB565|ZR36057_VFESPFR_ErrDif|
- ZR36057_VFESPFR_LittleEndian,
- }, {
- .name = "16-bit RGB BE",
- .fourcc = V4L2_PIX_FMT_RGB565X,
- .colorspace = V4L2_COLORSPACE_SRGB,
- .depth = 16,
- .flags = ZORAN_FORMAT_CAPTURE |
- ZORAN_FORMAT_OVERLAY,
- .vfespfr = ZR36057_VFESPFR_RGB565|ZR36057_VFESPFR_ErrDif,
- }, {
- .name = "24-bit RGB",
- .fourcc = V4L2_PIX_FMT_BGR24,
- .colorspace = V4L2_COLORSPACE_SRGB,
- .depth = 24,
- .flags = ZORAN_FORMAT_CAPTURE |
- ZORAN_FORMAT_OVERLAY,
- .vfespfr = ZR36057_VFESPFR_RGB888|ZR36057_VFESPFR_Pack24,
- }, {
- .name = "32-bit RGB LE",
- .fourcc = V4L2_PIX_FMT_BGR32,
- .colorspace = V4L2_COLORSPACE_SRGB,
- .depth = 32,
- .flags = ZORAN_FORMAT_CAPTURE |
- ZORAN_FORMAT_OVERLAY,
- .vfespfr = ZR36057_VFESPFR_RGB888|ZR36057_VFESPFR_LittleEndian,
- }, {
- .name = "32-bit RGB BE",
- .fourcc = V4L2_PIX_FMT_RGB32,
- .colorspace = V4L2_COLORSPACE_SRGB,
- .depth = 32,
- .flags = ZORAN_FORMAT_CAPTURE |
- ZORAN_FORMAT_OVERLAY,
- .vfespfr = ZR36057_VFESPFR_RGB888,
- }, {
- .name = "4:2:2, packed, YUYV",
- .fourcc = V4L2_PIX_FMT_YUYV,
- .colorspace = V4L2_COLORSPACE_SMPTE170M,
- .depth = 16,
- .flags = ZORAN_FORMAT_CAPTURE |
- ZORAN_FORMAT_OVERLAY,
- .vfespfr = ZR36057_VFESPFR_YUV422,
- }, {
- .name = "4:2:2, packed, UYVY",
- .fourcc = V4L2_PIX_FMT_UYVY,
- .colorspace = V4L2_COLORSPACE_SMPTE170M,
- .depth = 16,
- .flags = ZORAN_FORMAT_CAPTURE |
- ZORAN_FORMAT_OVERLAY,
- .vfespfr = ZR36057_VFESPFR_YUV422|ZR36057_VFESPFR_LittleEndian,
- }, {
- .name = "Hardware-encoded Motion-JPEG",
- .fourcc = V4L2_PIX_FMT_MJPEG,
- .colorspace = V4L2_COLORSPACE_SMPTE170M,
- .depth = 0,
- .flags = ZORAN_FORMAT_CAPTURE |
- ZORAN_FORMAT_PLAYBACK |
- ZORAN_FORMAT_COMPRESSED,
- }
-};
-#define NUM_FORMATS ARRAY_SIZE(zoran_formats)
-
- /* small helper function for calculating buffersizes for v4l2
- * we calculate the nearest higher power-of-two, which
- * will be the recommended buffersize */
-static __u32
-zoran_v4l2_calc_bufsize (struct zoran_jpg_settings *settings)
-{
- __u8 div = settings->VerDcm * settings->HorDcm * settings->TmpDcm;
- __u32 num = (1024 * 512) / (div);
- __u32 result = 2;
-
- num--;
- while (num) {
- num >>= 1;
- result <<= 1;
- }
-
- if (result > jpg_bufsize)
- return jpg_bufsize;
- if (result < 8192)
- return 8192;
- return result;
-}
-
-/* forward references */
-static void v4l_fbuffer_free(struct zoran_fh *fh);
-static void jpg_fbuffer_free(struct zoran_fh *fh);
-
-/* Set mapping mode */
-static void map_mode_raw(struct zoran_fh *fh)
-{
- fh->map_mode = ZORAN_MAP_MODE_RAW;
- fh->buffers.buffer_size = v4l_bufsize;
- fh->buffers.num_buffers = v4l_nbufs;
-}
-static void map_mode_jpg(struct zoran_fh *fh, int play)
-{
- fh->map_mode = play ? ZORAN_MAP_MODE_JPG_PLAY : ZORAN_MAP_MODE_JPG_REC;
- fh->buffers.buffer_size = jpg_bufsize;
- fh->buffers.num_buffers = jpg_nbufs;
-}
-static inline const char *mode_name(enum zoran_map_mode mode)
-{
- return mode == ZORAN_MAP_MODE_RAW ? "V4L" : "JPG";
-}
-
-/*
- * Allocate the V4L grab buffers
- *
- * These have to be pysically contiguous.
- */
-
-static int v4l_fbuffer_alloc(struct zoran_fh *fh)
-{
- struct zoran *zr = fh->zr;
- int i, off;
- unsigned char *mem;
-
- for (i = 0; i < fh->buffers.num_buffers; i++) {
- if (fh->buffers.buffer[i].v4l.fbuffer)
- dprintk(2,
- KERN_WARNING
- "%s: %s - buffer %d already allocated!?\n",
- ZR_DEVNAME(zr), __func__, i);
-
- //udelay(20);
- mem = kmalloc(fh->buffers.buffer_size,
- GFP_KERNEL | __GFP_NOWARN);
- if (!mem) {
- dprintk(1,
- KERN_ERR
- "%s: %s - kmalloc for V4L buf %d failed\n",
- ZR_DEVNAME(zr), __func__, i);
- v4l_fbuffer_free(fh);
- return -ENOBUFS;
- }
- fh->buffers.buffer[i].v4l.fbuffer = mem;
- fh->buffers.buffer[i].v4l.fbuffer_phys = virt_to_phys(mem);
- fh->buffers.buffer[i].v4l.fbuffer_bus = virt_to_bus(mem);
- for (off = 0; off < fh->buffers.buffer_size;
- off += PAGE_SIZE)
- SetPageReserved(virt_to_page(mem + off));
- dprintk(4,
- KERN_INFO
- "%s: %s - V4L frame %d mem %p (bus: 0x%llx)\n",
- ZR_DEVNAME(zr), __func__, i, mem,
- (unsigned long long)virt_to_bus(mem));
- }
-
- fh->buffers.allocated = 1;
-
- return 0;
-}
-
-/* free the V4L grab buffers */
-static void v4l_fbuffer_free(struct zoran_fh *fh)
-{
- struct zoran *zr = fh->zr;
- int i, off;
- unsigned char *mem;
-
- dprintk(4, KERN_INFO "%s: %s\n", ZR_DEVNAME(zr), __func__);
-
- for (i = 0; i < fh->buffers.num_buffers; i++) {
- if (!fh->buffers.buffer[i].v4l.fbuffer)
- continue;
-
- mem = fh->buffers.buffer[i].v4l.fbuffer;
- for (off = 0; off < fh->buffers.buffer_size;
- off += PAGE_SIZE)
- ClearPageReserved(virt_to_page(mem + off));
- kfree(fh->buffers.buffer[i].v4l.fbuffer);
- fh->buffers.buffer[i].v4l.fbuffer = NULL;
- }
-
- fh->buffers.allocated = 0;
-}
-
-/*
- * Allocate the MJPEG grab buffers.
- *
- * If a Natoma chipset is present and this is a revision 1 zr36057,
- * each MJPEG buffer needs to be physically contiguous.
- * (RJ: This statement is from Dave Perks' original driver,
- * I could never check it because I have a zr36067)
- *
- * RJ: The contents grab buffers needs never be accessed in the driver.
- * Therefore there is no need to allocate them with vmalloc in order
- * to get a contiguous virtual memory space.
- * I don't understand why many other drivers first allocate them with
- * vmalloc (which uses internally also get_zeroed_page, but delivers you
- * virtual addresses) and then again have to make a lot of efforts
- * to get the physical address.
- *
- * Ben Capper:
- * On big-endian architectures (such as ppc) some extra steps
- * are needed. When reading and writing to the stat_com array
- * and fragment buffers, the device expects to see little-
- * endian values. The use of cpu_to_le32() and le32_to_cpu()
- * in this function (and one or two others in zoran_device.c)
- * ensure that these values are always stored in little-endian
- * form, regardless of architecture. The zr36057 does Very Bad
- * Things on big endian architectures if the stat_com array
- * and fragment buffers are not little-endian.
- */
-
-static int jpg_fbuffer_alloc(struct zoran_fh *fh)
-{
- struct zoran *zr = fh->zr;
- int i, j, off;
- u8 *mem;
-
- for (i = 0; i < fh->buffers.num_buffers; i++) {
- if (fh->buffers.buffer[i].jpg.frag_tab)
- dprintk(2,
- KERN_WARNING
- "%s: %s - buffer %d already allocated!?\n",
- ZR_DEVNAME(zr), __func__, i);
-
- /* Allocate fragment table for this buffer */
-
- mem = (void *)get_zeroed_page(GFP_KERNEL);
- if (!mem) {
- dprintk(1,
- KERN_ERR
- "%s: %s - get_zeroed_page (frag_tab) failed for buffer %d\n",
- ZR_DEVNAME(zr), __func__, i);
- jpg_fbuffer_free(fh);
- return -ENOBUFS;
- }
- fh->buffers.buffer[i].jpg.frag_tab = (__le32 *)mem;
- fh->buffers.buffer[i].jpg.frag_tab_bus = virt_to_bus(mem);
-
- if (fh->buffers.need_contiguous) {
- mem = kmalloc(fh->buffers.buffer_size, GFP_KERNEL);
- if (mem == NULL) {
- dprintk(1,
- KERN_ERR
- "%s: %s - kmalloc failed for buffer %d\n",
- ZR_DEVNAME(zr), __func__, i);
- jpg_fbuffer_free(fh);
- return -ENOBUFS;
- }
- fh->buffers.buffer[i].jpg.frag_tab[0] =
- cpu_to_le32(virt_to_bus(mem));
- fh->buffers.buffer[i].jpg.frag_tab[1] =
- cpu_to_le32((fh->buffers.buffer_size >> 1) | 1);
- for (off = 0; off < fh->buffers.buffer_size; off += PAGE_SIZE)
- SetPageReserved(virt_to_page(mem + off));
- } else {
- /* jpg_bufsize is already page aligned */
- for (j = 0; j < fh->buffers.buffer_size / PAGE_SIZE; j++) {
- mem = (void *)get_zeroed_page(GFP_KERNEL);
- if (mem == NULL) {
- dprintk(1,
- KERN_ERR
- "%s: %s - get_zeroed_page failed for buffer %d\n",
- ZR_DEVNAME(zr), __func__, i);
- jpg_fbuffer_free(fh);
- return -ENOBUFS;
- }
-
- fh->buffers.buffer[i].jpg.frag_tab[2 * j] =
- cpu_to_le32(virt_to_bus(mem));
- fh->buffers.buffer[i].jpg.frag_tab[2 * j + 1] =
- cpu_to_le32((PAGE_SIZE >> 2) << 1);
- SetPageReserved(virt_to_page(mem));
- }
-
- fh->buffers.buffer[i].jpg.frag_tab[2 * j - 1] |= cpu_to_le32(1);
- }
- }
-
- dprintk(4,
- KERN_DEBUG "%s: %s - %d KB allocated\n",
- ZR_DEVNAME(zr), __func__,
- (fh->buffers.num_buffers * fh->buffers.buffer_size) >> 10);
-
- fh->buffers.allocated = 1;
-
- return 0;
-}
-
-/* free the MJPEG grab buffers */
-static void jpg_fbuffer_free(struct zoran_fh *fh)
-{
- struct zoran *zr = fh->zr;
- int i, j, off;
- unsigned char *mem;
- __le32 frag_tab;
- struct zoran_buffer *buffer;
-
- dprintk(4, KERN_DEBUG "%s: %s\n", ZR_DEVNAME(zr), __func__);
-
- for (i = 0, buffer = &fh->buffers.buffer[0];
- i < fh->buffers.num_buffers; i++, buffer++) {
- if (!buffer->jpg.frag_tab)
- continue;
-
- if (fh->buffers.need_contiguous) {
- frag_tab = buffer->jpg.frag_tab[0];
-
- if (frag_tab) {
- mem = bus_to_virt(le32_to_cpu(frag_tab));
- for (off = 0; off < fh->buffers.buffer_size; off += PAGE_SIZE)
- ClearPageReserved(virt_to_page(mem + off));
- kfree(mem);
- buffer->jpg.frag_tab[0] = 0;
- buffer->jpg.frag_tab[1] = 0;
- }
- } else {
- for (j = 0; j < fh->buffers.buffer_size / PAGE_SIZE; j++) {
- frag_tab = buffer->jpg.frag_tab[2 * j];
-
- if (!frag_tab)
- break;
- ClearPageReserved(virt_to_page(bus_to_virt(le32_to_cpu(frag_tab))));
- free_page((unsigned long)bus_to_virt(le32_to_cpu(frag_tab)));
- buffer->jpg.frag_tab[2 * j] = 0;
- buffer->jpg.frag_tab[2 * j + 1] = 0;
- }
- }
-
- free_page((unsigned long)buffer->jpg.frag_tab);
- buffer->jpg.frag_tab = NULL;
- }
-
- fh->buffers.allocated = 0;
-}
-
-/*
- * V4L Buffer grabbing
- */
-
-static int
-zoran_v4l_set_format (struct zoran_fh *fh,
- int width,
- int height,
- const struct zoran_format *format)
-{
- struct zoran *zr = fh->zr;
- int bpp;
-
- /* Check size and format of the grab wanted */
-
- if (height < BUZ_MIN_HEIGHT || width < BUZ_MIN_WIDTH ||
- height > BUZ_MAX_HEIGHT || width > BUZ_MAX_WIDTH) {
- dprintk(1,
- KERN_ERR
- "%s: %s - wrong frame size (%dx%d)\n",
- ZR_DEVNAME(zr), __func__, width, height);
- return -EINVAL;
- }
-
- bpp = (format->depth + 7) / 8;
-
- /* Check against available buffer size */
- if (height * width * bpp > fh->buffers.buffer_size) {
- dprintk(1,
- KERN_ERR
- "%s: %s - video buffer size (%d kB) is too small\n",
- ZR_DEVNAME(zr), __func__, fh->buffers.buffer_size >> 10);
- return -EINVAL;
- }
-
- /* The video front end needs 4-byte alinged line sizes */
-
- if ((bpp == 2 && (width & 1)) || (bpp == 3 && (width & 3))) {
- dprintk(1,
- KERN_ERR
- "%s: %s - wrong frame alignment\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
-
- fh->v4l_settings.width = width;
- fh->v4l_settings.height = height;
- fh->v4l_settings.format = format;
- fh->v4l_settings.bytesperline = bpp * fh->v4l_settings.width;
-
- return 0;
-}
-
-static int zoran_v4l_queue_frame(struct zoran_fh *fh, int num)
-{
- struct zoran *zr = fh->zr;
- unsigned long flags;
- int res = 0;
-
- if (!fh->buffers.allocated) {
- dprintk(1,
- KERN_ERR
- "%s: %s - buffers not yet allocated\n",
- ZR_DEVNAME(zr), __func__);
- res = -ENOMEM;
- }
-
- /* No grabbing outside the buffer range! */
- if (num >= fh->buffers.num_buffers || num < 0) {
- dprintk(1,
- KERN_ERR
- "%s: %s - buffer %d is out of range\n",
- ZR_DEVNAME(zr), __func__, num);
- res = -EINVAL;
- }
-
- spin_lock_irqsave(&zr->spinlock, flags);
-
- if (fh->buffers.active == ZORAN_FREE) {
- if (zr->v4l_buffers.active == ZORAN_FREE) {
- zr->v4l_buffers = fh->buffers;
- fh->buffers.active = ZORAN_ACTIVE;
- } else {
- dprintk(1,
- KERN_ERR
- "%s: %s - another session is already capturing\n",
- ZR_DEVNAME(zr), __func__);
- res = -EBUSY;
- }
- }
-
- /* make sure a grab isn't going on currently with this buffer */
- if (!res) {
- switch (zr->v4l_buffers.buffer[num].state) {
- default:
- case BUZ_STATE_PEND:
- if (zr->v4l_buffers.active == ZORAN_FREE) {
- fh->buffers.active = ZORAN_FREE;
- zr->v4l_buffers.allocated = 0;
- }
- res = -EBUSY; /* what are you doing? */
- break;
- case BUZ_STATE_DONE:
- dprintk(2,
- KERN_WARNING
- "%s: %s - queueing buffer %d in state DONE!?\n",
- ZR_DEVNAME(zr), __func__, num);
- /* fall through */
- case BUZ_STATE_USER:
- /* since there is at least one unused buffer there's room for at least
- * one more pend[] entry */
- zr->v4l_pend[zr->v4l_pend_head++ & V4L_MASK_FRAME] = num;
- zr->v4l_buffers.buffer[num].state = BUZ_STATE_PEND;
- zr->v4l_buffers.buffer[num].bs.length =
- fh->v4l_settings.bytesperline *
- zr->v4l_settings.height;
- fh->buffers.buffer[num] = zr->v4l_buffers.buffer[num];
- break;
- }
- }
-
- spin_unlock_irqrestore(&zr->spinlock, flags);
-
- if (!res && zr->v4l_buffers.active == ZORAN_FREE)
- zr->v4l_buffers.active = fh->buffers.active;
-
- return res;
-}
-
-/*
- * Sync on a V4L buffer
- */
-
-static int v4l_sync(struct zoran_fh *fh, int frame)
-{
- struct zoran *zr = fh->zr;
- unsigned long flags;
-
- if (fh->buffers.active == ZORAN_FREE) {
- dprintk(1,
- KERN_ERR
- "%s: %s - no grab active for this session\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
-
- /* check passed-in frame number */
- if (frame >= fh->buffers.num_buffers || frame < 0) {
- dprintk(1,
- KERN_ERR "%s: %s - frame %d is invalid\n",
- ZR_DEVNAME(zr), __func__, frame);
- return -EINVAL;
- }
-
- /* Check if is buffer was queued at all */
- if (zr->v4l_buffers.buffer[frame].state == BUZ_STATE_USER) {
- dprintk(1,
- KERN_ERR
- "%s: %s - attempt to sync on a buffer which was not queued?\n",
- ZR_DEVNAME(zr), __func__);
- return -EPROTO;
- }
-
- mutex_unlock(&zr->lock);
- /* wait on this buffer to get ready */
- if (!wait_event_interruptible_timeout(zr->v4l_capq,
- (zr->v4l_buffers.buffer[frame].state != BUZ_STATE_PEND), 10*HZ)) {
- mutex_lock(&zr->lock);
- return -ETIME;
- }
- mutex_lock(&zr->lock);
- if (signal_pending(current))
- return -ERESTARTSYS;
-
- /* buffer should now be in BUZ_STATE_DONE */
- if (zr->v4l_buffers.buffer[frame].state != BUZ_STATE_DONE)
- dprintk(2,
- KERN_ERR "%s: %s - internal state error\n",
- ZR_DEVNAME(zr), __func__);
-
- zr->v4l_buffers.buffer[frame].state = BUZ_STATE_USER;
- fh->buffers.buffer[frame] = zr->v4l_buffers.buffer[frame];
-
- spin_lock_irqsave(&zr->spinlock, flags);
-
- /* Check if streaming capture has finished */
- if (zr->v4l_pend_tail == zr->v4l_pend_head) {
- zr36057_set_memgrab(zr, 0);
- if (zr->v4l_buffers.active == ZORAN_ACTIVE) {
- fh->buffers.active = zr->v4l_buffers.active = ZORAN_FREE;
- zr->v4l_buffers.allocated = 0;
- }
- }
-
- spin_unlock_irqrestore(&zr->spinlock, flags);
-
- return 0;
-}
-
-/*
- * Queue a MJPEG buffer for capture/playback
- */
-
-static int zoran_jpg_queue_frame(struct zoran_fh *fh, int num,
- enum zoran_codec_mode mode)
-{
- struct zoran *zr = fh->zr;
- unsigned long flags;
- int res = 0;
-
- /* Check if buffers are allocated */
- if (!fh->buffers.allocated) {
- dprintk(1,
- KERN_ERR
- "%s: %s - buffers not yet allocated\n",
- ZR_DEVNAME(zr), __func__);
- return -ENOMEM;
- }
-
- /* No grabbing outside the buffer range! */
- if (num >= fh->buffers.num_buffers || num < 0) {
- dprintk(1,
- KERN_ERR
- "%s: %s - buffer %d out of range\n",
- ZR_DEVNAME(zr), __func__, num);
- return -EINVAL;
- }
-
- /* what is the codec mode right now? */
- if (zr->codec_mode == BUZ_MODE_IDLE) {
- zr->jpg_settings = fh->jpg_settings;
- } else if (zr->codec_mode != mode) {
- /* wrong codec mode active - invalid */
- dprintk(1,
- KERN_ERR
- "%s: %s - codec in wrong mode\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
-
- if (fh->buffers.active == ZORAN_FREE) {
- if (zr->jpg_buffers.active == ZORAN_FREE) {
- zr->jpg_buffers = fh->buffers;
- fh->buffers.active = ZORAN_ACTIVE;
- } else {
- dprintk(1,
- KERN_ERR
- "%s: %s - another session is already capturing\n",
- ZR_DEVNAME(zr), __func__);
- res = -EBUSY;
- }
- }
-
- if (!res && zr->codec_mode == BUZ_MODE_IDLE) {
- /* Ok load up the jpeg codec */
- zr36057_enable_jpg(zr, mode);
- }
-
- spin_lock_irqsave(&zr->spinlock, flags);
-
- if (!res) {
- switch (zr->jpg_buffers.buffer[num].state) {
- case BUZ_STATE_DONE:
- dprintk(2,
- KERN_WARNING
- "%s: %s - queuing frame in BUZ_STATE_DONE state!?\n",
- ZR_DEVNAME(zr), __func__);
- /* fall through */
- case BUZ_STATE_USER:
- /* since there is at least one unused buffer there's room for at
- *least one more pend[] entry */
- zr->jpg_pend[zr->jpg_que_head++ & BUZ_MASK_FRAME] = num;
- zr->jpg_buffers.buffer[num].state = BUZ_STATE_PEND;
- fh->buffers.buffer[num] = zr->jpg_buffers.buffer[num];
- zoran_feed_stat_com(zr);
- break;
- default:
- case BUZ_STATE_DMA:
- case BUZ_STATE_PEND:
- if (zr->jpg_buffers.active == ZORAN_FREE) {
- fh->buffers.active = ZORAN_FREE;
- zr->jpg_buffers.allocated = 0;
- }
- res = -EBUSY; /* what are you doing? */
- break;
- }
- }
-
- spin_unlock_irqrestore(&zr->spinlock, flags);
-
- if (!res && zr->jpg_buffers.active == ZORAN_FREE)
- zr->jpg_buffers.active = fh->buffers.active;
-
- return res;
-}
-
-static int jpg_qbuf(struct zoran_fh *fh, int frame, enum zoran_codec_mode mode)
-{
- struct zoran *zr = fh->zr;
- int res = 0;
-
- /* Does the user want to stop streaming? */
- if (frame < 0) {
- if (zr->codec_mode == mode) {
- if (fh->buffers.active == ZORAN_FREE) {
- dprintk(1,
- KERN_ERR
- "%s: %s(-1) - session not active\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
- fh->buffers.active = zr->jpg_buffers.active = ZORAN_FREE;
- zr->jpg_buffers.allocated = 0;
- zr36057_enable_jpg(zr, BUZ_MODE_IDLE);
- return 0;
- } else {
- dprintk(1,
- KERN_ERR
- "%s: %s - stop streaming but not in streaming mode\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
- }
-
- if ((res = zoran_jpg_queue_frame(fh, frame, mode)))
- return res;
-
- /* Start the jpeg codec when the first frame is queued */
- if (!res && zr->jpg_que_head == 1)
- jpeg_start(zr);
-
- return res;
-}
-
-/*
- * Sync on a MJPEG buffer
- */
-
-static int jpg_sync(struct zoran_fh *fh, struct zoran_sync *bs)
-{
- struct zoran *zr = fh->zr;
- unsigned long flags;
- int frame;
-
- if (fh->buffers.active == ZORAN_FREE) {
- dprintk(1,
- KERN_ERR
- "%s: %s - capture is not currently active\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
- if (zr->codec_mode != BUZ_MODE_MOTION_DECOMPRESS &&
- zr->codec_mode != BUZ_MODE_MOTION_COMPRESS) {
- dprintk(1,
- KERN_ERR
- "%s: %s - codec not in streaming mode\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
- mutex_unlock(&zr->lock);
- if (!wait_event_interruptible_timeout(zr->jpg_capq,
- (zr->jpg_que_tail != zr->jpg_dma_tail ||
- zr->jpg_dma_tail == zr->jpg_dma_head),
- 10*HZ)) {
- int isr;
-
- btand(~ZR36057_JMC_Go_en, ZR36057_JMC);
- udelay(1);
- zr->codec->control(zr->codec, CODEC_G_STATUS,
- sizeof(isr), &isr);
- mutex_lock(&zr->lock);
- dprintk(1,
- KERN_ERR
- "%s: %s - timeout: codec isr=0x%02x\n",
- ZR_DEVNAME(zr), __func__, isr);
-
- return -ETIME;
-
- }
- mutex_lock(&zr->lock);
- if (signal_pending(current))
- return -ERESTARTSYS;
-
- spin_lock_irqsave(&zr->spinlock, flags);
-
- if (zr->jpg_dma_tail != zr->jpg_dma_head)
- frame = zr->jpg_pend[zr->jpg_que_tail++ & BUZ_MASK_FRAME];
- else
- frame = zr->jpg_pend[zr->jpg_que_tail & BUZ_MASK_FRAME];
-
- /* buffer should now be in BUZ_STATE_DONE */
- if (zr->jpg_buffers.buffer[frame].state != BUZ_STATE_DONE)
- dprintk(2,
- KERN_ERR "%s: %s - internal state error\n",
- ZR_DEVNAME(zr), __func__);
-
- *bs = zr->jpg_buffers.buffer[frame].bs;
- bs->frame = frame;
- zr->jpg_buffers.buffer[frame].state = BUZ_STATE_USER;
- fh->buffers.buffer[frame] = zr->jpg_buffers.buffer[frame];
-
- spin_unlock_irqrestore(&zr->spinlock, flags);
-
- return 0;
-}
-
-static void zoran_open_init_session(struct zoran_fh *fh)
-{
- int i;
- struct zoran *zr = fh->zr;
-
- /* Per default, map the V4L Buffers */
- map_mode_raw(fh);
-
- /* take over the card's current settings */
- fh->overlay_settings = zr->overlay_settings;
- fh->overlay_settings.is_set = 0;
- fh->overlay_settings.format = zr->overlay_settings.format;
- fh->overlay_active = ZORAN_FREE;
-
- /* v4l settings */
- fh->v4l_settings = zr->v4l_settings;
- /* jpg settings */
- fh->jpg_settings = zr->jpg_settings;
-
- /* buffers */
- memset(&fh->buffers, 0, sizeof(fh->buffers));
- for (i = 0; i < MAX_FRAME; i++) {
- fh->buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */
- fh->buffers.buffer[i].bs.frame = i;
- }
- fh->buffers.allocated = 0;
- fh->buffers.active = ZORAN_FREE;
-}
-
-static void zoran_close_end_session(struct zoran_fh *fh)
-{
- struct zoran *zr = fh->zr;
-
- /* overlay */
- if (fh->overlay_active != ZORAN_FREE) {
- fh->overlay_active = zr->overlay_active = ZORAN_FREE;
- zr->v4l_overlay_active = 0;
- if (!zr->v4l_memgrab_active)
- zr36057_overlay(zr, 0);
- zr->overlay_mask = NULL;
- }
-
- if (fh->map_mode == ZORAN_MAP_MODE_RAW) {
- /* v4l capture */
- if (fh->buffers.active != ZORAN_FREE) {
- unsigned long flags;
-
- spin_lock_irqsave(&zr->spinlock, flags);
- zr36057_set_memgrab(zr, 0);
- zr->v4l_buffers.allocated = 0;
- zr->v4l_buffers.active = fh->buffers.active = ZORAN_FREE;
- spin_unlock_irqrestore(&zr->spinlock, flags);
- }
-
- /* v4l buffers */
- if (fh->buffers.allocated)
- v4l_fbuffer_free(fh);
- } else {
- /* jpg capture */
- if (fh->buffers.active != ZORAN_FREE) {
- zr36057_enable_jpg(zr, BUZ_MODE_IDLE);
- zr->jpg_buffers.allocated = 0;
- zr->jpg_buffers.active = fh->buffers.active = ZORAN_FREE;
- }
-
- /* jpg buffers */
- if (fh->buffers.allocated)
- jpg_fbuffer_free(fh);
- }
-}
-
-/*
- * Open a zoran card. Right now the flags stuff is just playing
- */
-
-static int zoran_open(struct file *file)
-{
- struct zoran *zr = video_drvdata(file);
- struct zoran_fh *fh;
- int res, first_open = 0;
-
- dprintk(2, KERN_INFO "%s: %s(%s, pid=[%d]), users(-)=%d\n",
- ZR_DEVNAME(zr), __func__, current->comm, task_pid_nr(current), zr->user + 1);
-
- mutex_lock(&zr->lock);
-
- if (zr->user >= 2048) {
- dprintk(1, KERN_ERR "%s: too many users (%d) on device\n",
- ZR_DEVNAME(zr), zr->user);
- res = -EBUSY;
- goto fail_unlock;
- }
-
- /* now, create the open()-specific file_ops struct */
- fh = kzalloc(sizeof(struct zoran_fh), GFP_KERNEL);
- if (!fh) {
- dprintk(1,
- KERN_ERR
- "%s: %s - allocation of zoran_fh failed\n",
- ZR_DEVNAME(zr), __func__);
- res = -ENOMEM;
- goto fail_unlock;
- }
- v4l2_fh_init(&fh->fh, video_devdata(file));
-
- /* used to be BUZ_MAX_WIDTH/HEIGHT, but that gives overflows
- * on norm-change! */
- fh->overlay_mask =
- kmalloc(array3_size((768 + 31) / 32, 576, 4), GFP_KERNEL);
- if (!fh->overlay_mask) {
- dprintk(1,
- KERN_ERR
- "%s: %s - allocation of overlay_mask failed\n",
- ZR_DEVNAME(zr), __func__);
- res = -ENOMEM;
- goto fail_fh;
- }
-
- if (zr->user++ == 0)
- first_open = 1;
-
- /* default setup - TODO: look at flags */
- if (first_open) { /* First device open */
- zr36057_restart(zr);
- zoran_open_init_params(zr);
- zoran_init_hardware(zr);
-
- btor(ZR36057_ICR_IntPinEn, ZR36057_ICR);
- }
-
- /* set file_ops stuff */
- file->private_data = fh;
- fh->zr = zr;
- zoran_open_init_session(fh);
- v4l2_fh_add(&fh->fh);
- mutex_unlock(&zr->lock);
-
- return 0;
-
-fail_fh:
- v4l2_fh_exit(&fh->fh);
- kfree(fh);
-fail_unlock:
- mutex_unlock(&zr->lock);
-
- dprintk(2, KERN_INFO "%s: open failed (%d), users(-)=%d\n",
- ZR_DEVNAME(zr), res, zr->user);
-
- return res;
-}
-
-static int
-zoran_close(struct file *file)
-{
- struct zoran_fh *fh = file->private_data;
- struct zoran *zr = fh->zr;
-
- dprintk(2, KERN_INFO "%s: %s(%s, pid=[%d]), users(+)=%d\n",
- ZR_DEVNAME(zr), __func__, current->comm, task_pid_nr(current), zr->user - 1);
-
- /* kernel locks (fs/device.c), so don't do that ourselves
- * (prevents deadlocks) */
- mutex_lock(&zr->lock);
-
- zoran_close_end_session(fh);
-
- if (zr->user-- == 1) { /* Last process */
- /* Clean up JPEG process */
- wake_up_interruptible(&zr->jpg_capq);
- zr36057_enable_jpg(zr, BUZ_MODE_IDLE);
- zr->jpg_buffers.allocated = 0;
- zr->jpg_buffers.active = ZORAN_FREE;
-
- /* disable interrupts */
- btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR);
-
- if (zr36067_debug > 1)
- print_interrupts(zr);
-
- /* Overlay off */
- zr->v4l_overlay_active = 0;
- zr36057_overlay(zr, 0);
- zr->overlay_mask = NULL;
-
- /* capture off */
- wake_up_interruptible(&zr->v4l_capq);
- zr36057_set_memgrab(zr, 0);
- zr->v4l_buffers.allocated = 0;
- zr->v4l_buffers.active = ZORAN_FREE;
- zoran_set_pci_master(zr, 0);
-
- if (!pass_through) { /* Switch to color bar */
- decoder_call(zr, video, s_stream, 0);
- encoder_call(zr, video, s_routing, 2, 0, 0);
- }
- }
- mutex_unlock(&zr->lock);
-
- v4l2_fh_del(&fh->fh);
- v4l2_fh_exit(&fh->fh);
- kfree(fh->overlay_mask);
- kfree(fh);
-
- dprintk(4, KERN_INFO "%s: %s done\n", ZR_DEVNAME(zr), __func__);
-
- return 0;
-}
-
-static int setup_fbuffer(struct zoran_fh *fh,
- void *base,
- const struct zoran_format *fmt,
- int width,
- int height,
- int bytesperline)
-{
- struct zoran *zr = fh->zr;
-
- /* (Ronald) v4l/v4l2 guidelines */
- if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO))
- return -EPERM;
-
- /* Don't allow frame buffer overlay if PCI or AGP is buggy, or on
- ALi Magik (that needs very low latency while the card needs a
- higher value always) */
-
- if (pci_pci_problems & (PCIPCI_FAIL | PCIAGP_FAIL | PCIPCI_ALIMAGIK))
- return -ENXIO;
-
- /* we need a bytesperline value, even if not given */
- if (!bytesperline)
- bytesperline = width * ((fmt->depth + 7) & ~7) / 8;
-
-#if 0
- if (zr->overlay_active) {
- /* dzjee... stupid users... don't even bother to turn off
- * overlay before changing the memory location...
- * normally, we would return errors here. However, one of
- * the tools that does this is... xawtv! and since xawtv
- * is used by +/- 99% of the users, we'd rather be user-
- * friendly and silently do as if nothing went wrong */
- dprintk(3,
- KERN_ERR
- "%s: %s - forced overlay turnoff because framebuffer changed\n",
- ZR_DEVNAME(zr), __func__);
- zr36057_overlay(zr, 0);
- }
-#endif
-
- if (!(fmt->flags & ZORAN_FORMAT_OVERLAY)) {
- dprintk(1,
- KERN_ERR
- "%s: %s - no valid overlay format given\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
- if (height <= 0 || width <= 0 || bytesperline <= 0) {
- dprintk(1,
- KERN_ERR
- "%s: %s - invalid height/width/bpl value (%d|%d|%d)\n",
- ZR_DEVNAME(zr), __func__, width, height, bytesperline);
- return -EINVAL;
- }
- if (bytesperline & 3) {
- dprintk(1,
- KERN_ERR
- "%s: %s - bytesperline (%d) must be 4-byte aligned\n",
- ZR_DEVNAME(zr), __func__, bytesperline);
- return -EINVAL;
- }
-
- zr->vbuf_base = (void *) ((unsigned long) base & ~3);
- zr->vbuf_height = height;
- zr->vbuf_width = width;
- zr->vbuf_depth = fmt->depth;
- zr->overlay_settings.format = fmt;
- zr->vbuf_bytesperline = bytesperline;
-
- /* The user should set new window parameters */
- zr->overlay_settings.is_set = 0;
-
- return 0;
-}
-
-
-static int setup_window(struct zoran_fh *fh,
- int x,
- int y,
- int width,
- int height,
- struct v4l2_clip __user *clips,
- unsigned int clipcount,
- void __user *bitmap)
-{
- struct zoran *zr = fh->zr;
- struct v4l2_clip *vcp = NULL;
- int on, end;
-
-
- if (!zr->vbuf_base) {
- dprintk(1,
- KERN_ERR
- "%s: %s - frame buffer has to be set first\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
-
- if (!fh->overlay_settings.format) {
- dprintk(1,
- KERN_ERR
- "%s: %s - no overlay format set\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
-
- if (clipcount > 2048) {
- dprintk(1,
- KERN_ERR
- "%s: %s - invalid clipcount\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
-
- /*
- * The video front end needs 4-byte alinged line sizes, we correct that
- * silently here if necessary
- */
- if (zr->vbuf_depth == 15 || zr->vbuf_depth == 16) {
- end = (x + width) & ~1; /* round down */
- x = (x + 1) & ~1; /* round up */
- width = end - x;
- }
-
- if (zr->vbuf_depth == 24) {
- end = (x + width) & ~3; /* round down */
- x = (x + 3) & ~3; /* round up */
- width = end - x;
- }
-
- if (width > BUZ_MAX_WIDTH)
- width = BUZ_MAX_WIDTH;
- if (height > BUZ_MAX_HEIGHT)
- height = BUZ_MAX_HEIGHT;
-
- /* Check for invalid parameters */
- if (width < BUZ_MIN_WIDTH || height < BUZ_MIN_HEIGHT ||
- width > BUZ_MAX_WIDTH || height > BUZ_MAX_HEIGHT) {
- dprintk(1,
- KERN_ERR
- "%s: %s - width = %d or height = %d invalid\n",
- ZR_DEVNAME(zr), __func__, width, height);
- return -EINVAL;
- }
-
- fh->overlay_settings.x = x;
- fh->overlay_settings.y = y;
- fh->overlay_settings.width = width;
- fh->overlay_settings.height = height;
- fh->overlay_settings.clipcount = clipcount;
-
- /*
- * If an overlay is running, we have to switch it off
- * and switch it on again in order to get the new settings in effect.
- *
- * We also want to avoid that the overlay mask is written
- * when an overlay is running.
- */
-
- on = zr->v4l_overlay_active && !zr->v4l_memgrab_active &&
- zr->overlay_active != ZORAN_FREE &&
- fh->overlay_active != ZORAN_FREE;
- if (on)
- zr36057_overlay(zr, 0);
-
- /*
- * Write the overlay mask if clips are wanted.
- * We prefer a bitmap.
- */
- if (bitmap) {
- /* fake value - it just means we want clips */
- fh->overlay_settings.clipcount = 1;
-
- if (copy_from_user(fh->overlay_mask, bitmap,
- (width * height + 7) / 8)) {
- return -EFAULT;
- }
- } else if (clipcount) {
- /* write our own bitmap from the clips */
- vcp = vmalloc(array_size(sizeof(struct v4l2_clip),
- clipcount + 4));
- if (vcp == NULL) {
- dprintk(1,
- KERN_ERR
- "%s: %s - Alloc of clip mask failed\n",
- ZR_DEVNAME(zr), __func__);
- return -ENOMEM;
- }
- if (copy_from_user
- (vcp, clips, sizeof(struct v4l2_clip) * clipcount)) {
- vfree(vcp);
- return -EFAULT;
- }
- write_overlay_mask(fh, vcp, clipcount);
- vfree(vcp);
- }
-
- fh->overlay_settings.is_set = 1;
- if (fh->overlay_active != ZORAN_FREE &&
- zr->overlay_active != ZORAN_FREE)
- zr->overlay_settings = fh->overlay_settings;
-
- if (on)
- zr36057_overlay(zr, 1);
-
- /* Make sure the changes come into effect */
- return wait_grab_pending(zr);
-}
-
-static int setup_overlay(struct zoran_fh *fh, int on)
-{
- struct zoran *zr = fh->zr;
-
- /* If there is nothing to do, return immediately */
- if ((on && fh->overlay_active != ZORAN_FREE) ||
- (!on && fh->overlay_active == ZORAN_FREE))
- return 0;
-
- /* check whether we're touching someone else's overlay */
- if (on && zr->overlay_active != ZORAN_FREE &&
- fh->overlay_active == ZORAN_FREE) {
- dprintk(1,
- KERN_ERR
- "%s: %s - overlay is already active for another session\n",
- ZR_DEVNAME(zr), __func__);
- return -EBUSY;
- }
- if (!on && zr->overlay_active != ZORAN_FREE &&
- fh->overlay_active == ZORAN_FREE) {
- dprintk(1,
- KERN_ERR
- "%s: %s - you cannot cancel someone else's session\n",
- ZR_DEVNAME(zr), __func__);
- return -EPERM;
- }
-
- if (on == 0) {
- zr->overlay_active = fh->overlay_active = ZORAN_FREE;
- zr->v4l_overlay_active = 0;
- /* When a grab is running, the video simply
- * won't be switched on any more */
- if (!zr->v4l_memgrab_active)
- zr36057_overlay(zr, 0);
- zr->overlay_mask = NULL;
- } else {
- if (!zr->vbuf_base || !fh->overlay_settings.is_set) {
- dprintk(1,
- KERN_ERR
- "%s: %s - buffer or window not set\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
- if (!fh->overlay_settings.format) {
- dprintk(1,
- KERN_ERR
- "%s: %s - no overlay format set\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
- zr->overlay_active = fh->overlay_active = ZORAN_LOCKED;
- zr->v4l_overlay_active = 1;
- zr->overlay_mask = fh->overlay_mask;
- zr->overlay_settings = fh->overlay_settings;
- if (!zr->v4l_memgrab_active)
- zr36057_overlay(zr, 1);
- /* When a grab is running, the video will be
- * switched on when grab is finished */
- }
-
- /* Make sure the changes come into effect */
- return wait_grab_pending(zr);
-}
-
-/* get the status of a buffer in the clients buffer queue */
-static int zoran_v4l2_buffer_status(struct zoran_fh *fh,
- struct v4l2_buffer *buf, int num)
-{
- struct zoran *zr = fh->zr;
- unsigned long flags;
-
- buf->flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
-
- switch (fh->map_mode) {
- case ZORAN_MAP_MODE_RAW:
- /* check range */
- if (num < 0 || num >= fh->buffers.num_buffers ||
- !fh->buffers.allocated) {
- dprintk(1,
- KERN_ERR
- "%s: %s - wrong number or buffers not allocated\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
-
- spin_lock_irqsave(&zr->spinlock, flags);
- dprintk(3,
- KERN_DEBUG
- "%s: %s() - raw active=%c, buffer %d: state=%c, map=%c\n",
- ZR_DEVNAME(zr), __func__,
- "FAL"[fh->buffers.active], num,
- "UPMD"[zr->v4l_buffers.buffer[num].state],
- fh->buffers.buffer[num].map ? 'Y' : 'N');
- spin_unlock_irqrestore(&zr->spinlock, flags);
-
- buf->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- buf->length = fh->buffers.buffer_size;
-
- /* get buffer */
- buf->bytesused = fh->buffers.buffer[num].bs.length;
- if (fh->buffers.buffer[num].state == BUZ_STATE_DONE ||
- fh->buffers.buffer[num].state == BUZ_STATE_USER) {
- buf->sequence = fh->buffers.buffer[num].bs.seq;
- buf->flags |= V4L2_BUF_FLAG_DONE;
- buf->timestamp = ns_to_timeval(fh->buffers.buffer[num].bs.ts);
- } else {
- buf->flags |= V4L2_BUF_FLAG_QUEUED;
- }
-
- if (fh->v4l_settings.height <= BUZ_MAX_HEIGHT / 2)
- buf->field = V4L2_FIELD_TOP;
- else
- buf->field = V4L2_FIELD_INTERLACED;
-
- break;
-
- case ZORAN_MAP_MODE_JPG_REC:
- case ZORAN_MAP_MODE_JPG_PLAY:
-
- /* check range */
- if (num < 0 || num >= fh->buffers.num_buffers ||
- !fh->buffers.allocated) {
- dprintk(1,
- KERN_ERR
- "%s: %s - wrong number or buffers not allocated\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
-
- buf->type = (fh->map_mode == ZORAN_MAP_MODE_JPG_REC) ?
- V4L2_BUF_TYPE_VIDEO_CAPTURE :
- V4L2_BUF_TYPE_VIDEO_OUTPUT;
- buf->length = fh->buffers.buffer_size;
-
- /* these variables are only written after frame has been captured */
- if (fh->buffers.buffer[num].state == BUZ_STATE_DONE ||
- fh->buffers.buffer[num].state == BUZ_STATE_USER) {
- buf->sequence = fh->buffers.buffer[num].bs.seq;
- buf->timestamp = ns_to_timeval(fh->buffers.buffer[num].bs.ts);
- buf->bytesused = fh->buffers.buffer[num].bs.length;
- buf->flags |= V4L2_BUF_FLAG_DONE;
- } else {
- buf->flags |= V4L2_BUF_FLAG_QUEUED;
- }
-
- /* which fields are these? */
- if (fh->jpg_settings.TmpDcm != 1)
- buf->field = fh->jpg_settings.odd_even ?
- V4L2_FIELD_TOP : V4L2_FIELD_BOTTOM;
- else
- buf->field = fh->jpg_settings.odd_even ?
- V4L2_FIELD_SEQ_TB : V4L2_FIELD_SEQ_BT;
-
- break;
-
- default:
-
- dprintk(5,
- KERN_ERR
- "%s: %s - invalid buffer type|map_mode (%d|%d)\n",
- ZR_DEVNAME(zr), __func__, buf->type, fh->map_mode);
- return -EINVAL;
- }
-
- buf->memory = V4L2_MEMORY_MMAP;
- buf->index = num;
- buf->m.offset = buf->length * num;
-
- return 0;
-}
-
-static int
-zoran_set_norm (struct zoran *zr,
- v4l2_std_id norm)
-{
- int on;
-
- if (zr->v4l_buffers.active != ZORAN_FREE ||
- zr->jpg_buffers.active != ZORAN_FREE) {
- dprintk(1,
- KERN_WARNING
- "%s: %s called while in playback/capture mode\n",
- ZR_DEVNAME(zr), __func__);
- return -EBUSY;
- }
-
- if (!(norm & zr->card.norms)) {
- dprintk(1,
- KERN_ERR "%s: %s - unsupported norm %llx\n",
- ZR_DEVNAME(zr), __func__, norm);
- return -EINVAL;
- }
-
- if (norm & V4L2_STD_SECAM)
- zr->timing = zr->card.tvn[2];
- else if (norm & V4L2_STD_NTSC)
- zr->timing = zr->card.tvn[1];
- else
- zr->timing = zr->card.tvn[0];
-
- /* We switch overlay off and on since a change in the
- * norm needs different VFE settings */
- on = zr->overlay_active && !zr->v4l_memgrab_active;
- if (on)
- zr36057_overlay(zr, 0);
-
- decoder_call(zr, video, s_std, norm);
- encoder_call(zr, video, s_std_output, norm);
-
- if (on)
- zr36057_overlay(zr, 1);
-
- /* Make sure the changes come into effect */
- zr->norm = norm;
-
- return 0;
-}
-
-static int
-zoran_set_input (struct zoran *zr,
- int input)
-{
- if (input == zr->input) {
- return 0;
- }
-
- if (zr->v4l_buffers.active != ZORAN_FREE ||
- zr->jpg_buffers.active != ZORAN_FREE) {
- dprintk(1,
- KERN_WARNING
- "%s: %s called while in playback/capture mode\n",
- ZR_DEVNAME(zr), __func__);
- return -EBUSY;
- }
-
- if (input < 0 || input >= zr->card.inputs) {
- dprintk(1,
- KERN_ERR
- "%s: %s - unsupported input %d\n",
- ZR_DEVNAME(zr), __func__, input);
- return -EINVAL;
- }
-
- zr->input = input;
-
- decoder_call(zr, video, s_routing,
- zr->card.input[input].muxsel, 0, 0);
-
- return 0;
-}
-
-/*
- * ioctl routine
- */
-
-static int zoran_querycap(struct file *file, void *__fh, struct v4l2_capability *cap)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
-
- strscpy(cap->card, ZR_DEVNAME(zr), sizeof(cap->card));
- strscpy(cap->driver, "zoran", sizeof(cap->driver));
- snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
- pci_name(zr->pci_dev));
- cap->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE |
- V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_VIDEO_OVERLAY;
- cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
- return 0;
-}
-
-static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag)
-{
- unsigned int num, i;
-
- for (num = i = 0; i < NUM_FORMATS; i++) {
- if (zoran_formats[i].flags & flag && num++ == fmt->index) {
- strscpy(fmt->description, zoran_formats[i].name,
- sizeof(fmt->description));
- /* fmt struct pre-zeroed, so adding '\0' not needed */
- fmt->pixelformat = zoran_formats[i].fourcc;
- if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)
- fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
- return 0;
- }
- }
- return -EINVAL;
-}
-
-static int zoran_enum_fmt_vid_cap(struct file *file, void *__fh,
- struct v4l2_fmtdesc *f)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
-
- return zoran_enum_fmt(zr, f, ZORAN_FORMAT_CAPTURE);
-}
-
-static int zoran_enum_fmt_vid_out(struct file *file, void *__fh,
- struct v4l2_fmtdesc *f)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
-
- return zoran_enum_fmt(zr, f, ZORAN_FORMAT_PLAYBACK);
-}
-
-static int zoran_enum_fmt_vid_overlay(struct file *file, void *__fh,
- struct v4l2_fmtdesc *f)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
-
- return zoran_enum_fmt(zr, f, ZORAN_FORMAT_OVERLAY);
-}
-
-static int zoran_g_fmt_vid_out(struct file *file, void *__fh,
- struct v4l2_format *fmt)
-{
- struct zoran_fh *fh = __fh;
-
- fmt->fmt.pix.width = fh->jpg_settings.img_width / fh->jpg_settings.HorDcm;
- fmt->fmt.pix.height = fh->jpg_settings.img_height * 2 /
- (fh->jpg_settings.VerDcm * fh->jpg_settings.TmpDcm);
- fmt->fmt.pix.sizeimage = zoran_v4l2_calc_bufsize(&fh->jpg_settings);
- fmt->fmt.pix.pixelformat = V4L2_PIX_FMT_MJPEG;
- if (fh->jpg_settings.TmpDcm == 1)
- fmt->fmt.pix.field = (fh->jpg_settings.odd_even ?
- V4L2_FIELD_SEQ_TB : V4L2_FIELD_SEQ_BT);
- else
- fmt->fmt.pix.field = (fh->jpg_settings.odd_even ?
- V4L2_FIELD_TOP : V4L2_FIELD_BOTTOM);
- fmt->fmt.pix.bytesperline = 0;
- fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
-
- return 0;
-}
-
-static int zoran_g_fmt_vid_cap(struct file *file, void *__fh,
- struct v4l2_format *fmt)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
-
- if (fh->map_mode != ZORAN_MAP_MODE_RAW)
- return zoran_g_fmt_vid_out(file, fh, fmt);
-
- fmt->fmt.pix.width = fh->v4l_settings.width;
- fmt->fmt.pix.height = fh->v4l_settings.height;
- fmt->fmt.pix.sizeimage = fh->v4l_settings.bytesperline *
- fh->v4l_settings.height;
- fmt->fmt.pix.pixelformat = fh->v4l_settings.format->fourcc;
- fmt->fmt.pix.colorspace = fh->v4l_settings.format->colorspace;
- fmt->fmt.pix.bytesperline = fh->v4l_settings.bytesperline;
- if (BUZ_MAX_HEIGHT < (fh->v4l_settings.height * 2))
- fmt->fmt.pix.field = V4L2_FIELD_INTERLACED;
- else
- fmt->fmt.pix.field = V4L2_FIELD_TOP;
- return 0;
-}
-
-static int zoran_g_fmt_vid_overlay(struct file *file, void *__fh,
- struct v4l2_format *fmt)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
-
- fmt->fmt.win.w.left = fh->overlay_settings.x;
- fmt->fmt.win.w.top = fh->overlay_settings.y;
- fmt->fmt.win.w.width = fh->overlay_settings.width;
- fmt->fmt.win.w.height = fh->overlay_settings.height;
- if (fh->overlay_settings.width * 2 > BUZ_MAX_HEIGHT)
- fmt->fmt.win.field = V4L2_FIELD_INTERLACED;
- else
- fmt->fmt.win.field = V4L2_FIELD_TOP;
-
- return 0;
-}
-
-static int zoran_try_fmt_vid_overlay(struct file *file, void *__fh,
- struct v4l2_format *fmt)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
-
- if (fmt->fmt.win.w.width > BUZ_MAX_WIDTH)
- fmt->fmt.win.w.width = BUZ_MAX_WIDTH;
- if (fmt->fmt.win.w.width < BUZ_MIN_WIDTH)
- fmt->fmt.win.w.width = BUZ_MIN_WIDTH;
- if (fmt->fmt.win.w.height > BUZ_MAX_HEIGHT)
- fmt->fmt.win.w.height = BUZ_MAX_HEIGHT;
- if (fmt->fmt.win.w.height < BUZ_MIN_HEIGHT)
- fmt->fmt.win.w.height = BUZ_MIN_HEIGHT;
-
- return 0;
-}
-
-static int zoran_try_fmt_vid_out(struct file *file, void *__fh,
- struct v4l2_format *fmt)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
- struct zoran_jpg_settings settings;
- int res = 0;
-
- if (fmt->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG)
- return -EINVAL;
-
- settings = fh->jpg_settings;
-
- /* we actually need to set 'real' parameters now */
- if ((fmt->fmt.pix.height * 2) > BUZ_MAX_HEIGHT)
- settings.TmpDcm = 1;
- else
- settings.TmpDcm = 2;
- settings.decimation = 0;
- if (fmt->fmt.pix.height <= fh->jpg_settings.img_height / 2)
- settings.VerDcm = 2;
- else
- settings.VerDcm = 1;
- if (fmt->fmt.pix.width <= fh->jpg_settings.img_width / 4)
- settings.HorDcm = 4;
- else if (fmt->fmt.pix.width <= fh->jpg_settings.img_width / 2)
- settings.HorDcm = 2;
- else
- settings.HorDcm = 1;
- if (settings.TmpDcm == 1)
- settings.field_per_buff = 2;
- else
- settings.field_per_buff = 1;
-
- if (settings.HorDcm > 1) {
- settings.img_x = (BUZ_MAX_WIDTH == 720) ? 8 : 0;
- settings.img_width = (BUZ_MAX_WIDTH == 720) ? 704 : BUZ_MAX_WIDTH;
- } else {
- settings.img_x = 0;
- settings.img_width = BUZ_MAX_WIDTH;
- }
-
- /* check */
- res = zoran_check_jpg_settings(zr, &settings, 1);
- if (res)
- return res;
-
- /* tell the user what we actually did */
- fmt->fmt.pix.width = settings.img_width / settings.HorDcm;
- fmt->fmt.pix.height = settings.img_height * 2 /
- (settings.TmpDcm * settings.VerDcm);
- if (settings.TmpDcm == 1)
- fmt->fmt.pix.field = (fh->jpg_settings.odd_even ?
- V4L2_FIELD_SEQ_TB : V4L2_FIELD_SEQ_BT);
- else
- fmt->fmt.pix.field = (fh->jpg_settings.odd_even ?
- V4L2_FIELD_TOP : V4L2_FIELD_BOTTOM);
-
- fmt->fmt.pix.sizeimage = zoran_v4l2_calc_bufsize(&settings);
- fmt->fmt.pix.bytesperline = 0;
- fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
- return res;
-}
-
-static int zoran_try_fmt_vid_cap(struct file *file, void *__fh,
- struct v4l2_format *fmt)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
- int bpp;
- int i;
-
- if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG)
- return zoran_try_fmt_vid_out(file, fh, fmt);
-
- for (i = 0; i < NUM_FORMATS; i++)
- if (zoran_formats[i].fourcc == fmt->fmt.pix.pixelformat)
- break;
-
- if (i == NUM_FORMATS)
- return -EINVAL;
-
- bpp = DIV_ROUND_UP(zoran_formats[i].depth, 8);
- v4l_bound_align_image(
- &fmt->fmt.pix.width, BUZ_MIN_WIDTH, BUZ_MAX_WIDTH, bpp == 2 ? 1 : 2,
- &fmt->fmt.pix.height, BUZ_MIN_HEIGHT, BUZ_MAX_HEIGHT, 0, 0);
- return 0;
-}
-
-static int zoran_s_fmt_vid_overlay(struct file *file, void *__fh,
- struct v4l2_format *fmt)
-{
- struct zoran_fh *fh = __fh;
- int res;
-
- dprintk(3, "x=%d, y=%d, w=%d, h=%d, cnt=%d, map=0x%p\n",
- fmt->fmt.win.w.left, fmt->fmt.win.w.top,
- fmt->fmt.win.w.width,
- fmt->fmt.win.w.height,
- fmt->fmt.win.clipcount,
- fmt->fmt.win.bitmap);
- res = setup_window(fh, fmt->fmt.win.w.left, fmt->fmt.win.w.top,
- fmt->fmt.win.w.width, fmt->fmt.win.w.height,
- (struct v4l2_clip __user *)fmt->fmt.win.clips,
- fmt->fmt.win.clipcount, fmt->fmt.win.bitmap);
- return res;
-}
-
-static int zoran_s_fmt_vid_out(struct file *file, void *__fh,
- struct v4l2_format *fmt)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
- __le32 printformat = __cpu_to_le32(fmt->fmt.pix.pixelformat);
- struct zoran_jpg_settings settings;
- int res = 0;
-
- dprintk(3, "size=%dx%d, fmt=0x%x (%4.4s)\n",
- fmt->fmt.pix.width, fmt->fmt.pix.height,
- fmt->fmt.pix.pixelformat,
- (char *) &printformat);
- if (fmt->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG)
- return -EINVAL;
-
- if (fh->buffers.allocated) {
- dprintk(1, KERN_ERR "%s: VIDIOC_S_FMT - cannot change capture mode\n",
- ZR_DEVNAME(zr));
- res = -EBUSY;
- return res;
- }
-
- settings = fh->jpg_settings;
-
- /* we actually need to set 'real' parameters now */
- if (fmt->fmt.pix.height * 2 > BUZ_MAX_HEIGHT)
- settings.TmpDcm = 1;
- else
- settings.TmpDcm = 2;
- settings.decimation = 0;
- if (fmt->fmt.pix.height <= fh->jpg_settings.img_height / 2)
- settings.VerDcm = 2;
- else
- settings.VerDcm = 1;
- if (fmt->fmt.pix.width <= fh->jpg_settings.img_width / 4)
- settings.HorDcm = 4;
- else if (fmt->fmt.pix.width <= fh->jpg_settings.img_width / 2)
- settings.HorDcm = 2;
- else
- settings.HorDcm = 1;
- if (settings.TmpDcm == 1)
- settings.field_per_buff = 2;
- else
- settings.field_per_buff = 1;
-
- if (settings.HorDcm > 1) {
- settings.img_x = (BUZ_MAX_WIDTH == 720) ? 8 : 0;
- settings.img_width = (BUZ_MAX_WIDTH == 720) ? 704 : BUZ_MAX_WIDTH;
- } else {
- settings.img_x = 0;
- settings.img_width = BUZ_MAX_WIDTH;
- }
-
- /* check */
- res = zoran_check_jpg_settings(zr, &settings, 0);
- if (res)
- return res;
-
- /* it's ok, so set them */
- fh->jpg_settings = settings;
-
- map_mode_jpg(fh, fmt->type == V4L2_BUF_TYPE_VIDEO_OUTPUT);
- fh->buffers.buffer_size = zoran_v4l2_calc_bufsize(&fh->jpg_settings);
-
- /* tell the user what we actually did */
- fmt->fmt.pix.width = settings.img_width / settings.HorDcm;
- fmt->fmt.pix.height = settings.img_height * 2 /
- (settings.TmpDcm * settings.VerDcm);
- if (settings.TmpDcm == 1)
- fmt->fmt.pix.field = (fh->jpg_settings.odd_even ?
- V4L2_FIELD_SEQ_TB : V4L2_FIELD_SEQ_BT);
- else
- fmt->fmt.pix.field = (fh->jpg_settings.odd_even ?
- V4L2_FIELD_TOP : V4L2_FIELD_BOTTOM);
- fmt->fmt.pix.bytesperline = 0;
- fmt->fmt.pix.sizeimage = fh->buffers.buffer_size;
- fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
- return res;
-}
-
-static int zoran_s_fmt_vid_cap(struct file *file, void *__fh,
- struct v4l2_format *fmt)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
- int i;
- int res = 0;
-
- if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG)
- return zoran_s_fmt_vid_out(file, fh, fmt);
-
- for (i = 0; i < NUM_FORMATS; i++)
- if (fmt->fmt.pix.pixelformat == zoran_formats[i].fourcc)
- break;
- if (i == NUM_FORMATS) {
- dprintk(1, KERN_ERR "%s: VIDIOC_S_FMT - unknown/unsupported format 0x%x\n",
- ZR_DEVNAME(zr), fmt->fmt.pix.pixelformat);
- return -EINVAL;
- }
-
- if ((fh->map_mode != ZORAN_MAP_MODE_RAW && fh->buffers.allocated) ||
- fh->buffers.active != ZORAN_FREE) {
- dprintk(1, KERN_ERR "%s: VIDIOC_S_FMT - cannot change capture mode\n",
- ZR_DEVNAME(zr));
- res = -EBUSY;
- return res;
- }
- if (fmt->fmt.pix.height > BUZ_MAX_HEIGHT)
- fmt->fmt.pix.height = BUZ_MAX_HEIGHT;
- if (fmt->fmt.pix.width > BUZ_MAX_WIDTH)
- fmt->fmt.pix.width = BUZ_MAX_WIDTH;
-
- map_mode_raw(fh);
-
- res = zoran_v4l_set_format(fh, fmt->fmt.pix.width, fmt->fmt.pix.height,
- &zoran_formats[i]);
- if (res)
- return res;
-
- /* tell the user the results/missing stuff */
- fmt->fmt.pix.bytesperline = fh->v4l_settings.bytesperline;
- fmt->fmt.pix.sizeimage = fh->v4l_settings.height * fh->v4l_settings.bytesperline;
- fmt->fmt.pix.colorspace = fh->v4l_settings.format->colorspace;
- if (BUZ_MAX_HEIGHT < (fh->v4l_settings.height * 2))
- fmt->fmt.pix.field = V4L2_FIELD_INTERLACED;
- else
- fmt->fmt.pix.field = V4L2_FIELD_TOP;
- return res;
-}
-
-static int zoran_g_fbuf(struct file *file, void *__fh,
- struct v4l2_framebuffer *fb)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
-
- memset(fb, 0, sizeof(*fb));
- fb->base = zr->vbuf_base;
- fb->fmt.width = zr->vbuf_width;
- fb->fmt.height = zr->vbuf_height;
- if (zr->overlay_settings.format)
- fb->fmt.pixelformat = fh->overlay_settings.format->fourcc;
- fb->fmt.bytesperline = zr->vbuf_bytesperline;
- fb->fmt.colorspace = V4L2_COLORSPACE_SRGB;
- fb->fmt.field = V4L2_FIELD_INTERLACED;
- fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING;
-
- return 0;
-}
-
-static int zoran_s_fbuf(struct file *file, void *__fh,
- const struct v4l2_framebuffer *fb)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
- int i, res = 0;
- __le32 printformat = __cpu_to_le32(fb->fmt.pixelformat);
-
- for (i = 0; i < NUM_FORMATS; i++)
- if (zoran_formats[i].fourcc == fb->fmt.pixelformat)
- break;
- if (i == NUM_FORMATS) {
- dprintk(1, KERN_ERR "%s: VIDIOC_S_FBUF - format=0x%x (%4.4s) not allowed\n",
- ZR_DEVNAME(zr), fb->fmt.pixelformat,
- (char *)&printformat);
- return -EINVAL;
- }
-
- res = setup_fbuffer(fh, fb->base, &zoran_formats[i], fb->fmt.width,
- fb->fmt.height, fb->fmt.bytesperline);
-
- return res;
-}
-
-static int zoran_overlay(struct file *file, void *__fh, unsigned int on)
-{
- struct zoran_fh *fh = __fh;
- int res;
-
- res = setup_overlay(fh, on);
-
- return res;
-}
-
-static int zoran_streamoff(struct file *file, void *__fh, enum v4l2_buf_type type);
-
-static int zoran_reqbufs(struct file *file, void *__fh, struct v4l2_requestbuffers *req)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
- int res = 0;
-
- if (req->memory != V4L2_MEMORY_MMAP) {
- dprintk(2,
- KERN_ERR
- "%s: only MEMORY_MMAP capture is supported, not %d\n",
- ZR_DEVNAME(zr), req->memory);
- return -EINVAL;
- }
-
- if (req->count == 0)
- return zoran_streamoff(file, fh, req->type);
-
- if (fh->buffers.allocated) {
- dprintk(2,
- KERN_ERR
- "%s: VIDIOC_REQBUFS - buffers already allocated\n",
- ZR_DEVNAME(zr));
- res = -EBUSY;
- return res;
- }
-
- if (fh->map_mode == ZORAN_MAP_MODE_RAW &&
- req->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
- /* control user input */
- if (req->count < 2)
- req->count = 2;
- if (req->count > v4l_nbufs)
- req->count = v4l_nbufs;
-
- /* The next mmap will map the V4L buffers */
- map_mode_raw(fh);
- fh->buffers.num_buffers = req->count;
-
- if (v4l_fbuffer_alloc(fh)) {
- res = -ENOMEM;
- return res;
- }
- } else if (fh->map_mode == ZORAN_MAP_MODE_JPG_REC ||
- fh->map_mode == ZORAN_MAP_MODE_JPG_PLAY) {
- /* we need to calculate size ourselves now */
- if (req->count < 4)
- req->count = 4;
- if (req->count > jpg_nbufs)
- req->count = jpg_nbufs;
-
- /* The next mmap will map the MJPEG buffers */
- map_mode_jpg(fh, req->type == V4L2_BUF_TYPE_VIDEO_OUTPUT);
- fh->buffers.num_buffers = req->count;
- fh->buffers.buffer_size = zoran_v4l2_calc_bufsize(&fh->jpg_settings);
-
- if (jpg_fbuffer_alloc(fh)) {
- res = -ENOMEM;
- return res;
- }
- } else {
- dprintk(1,
- KERN_ERR
- "%s: VIDIOC_REQBUFS - unknown type %d\n",
- ZR_DEVNAME(zr), req->type);
- res = -EINVAL;
- return res;
- }
- return res;
-}
-
-static int zoran_querybuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
-{
- struct zoran_fh *fh = __fh;
- int res;
-
- res = zoran_v4l2_buffer_status(fh, buf, buf->index);
-
- return res;
-}
-
-static int zoran_qbuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
- int res = 0, codec_mode, buf_type;
-
- switch (fh->map_mode) {
- case ZORAN_MAP_MODE_RAW:
- if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
- dprintk(1, KERN_ERR
- "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n",
- ZR_DEVNAME(zr), buf->type, fh->map_mode);
- res = -EINVAL;
- return res;
- }
-
- res = zoran_v4l_queue_frame(fh, buf->index);
- if (res)
- return res;
- if (!zr->v4l_memgrab_active && fh->buffers.active == ZORAN_LOCKED)
- zr36057_set_memgrab(zr, 1);
- break;
-
- case ZORAN_MAP_MODE_JPG_REC:
- case ZORAN_MAP_MODE_JPG_PLAY:
- if (fh->map_mode == ZORAN_MAP_MODE_JPG_PLAY) {
- buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
- codec_mode = BUZ_MODE_MOTION_DECOMPRESS;
- } else {
- buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- codec_mode = BUZ_MODE_MOTION_COMPRESS;
- }
-
- if (buf->type != buf_type) {
- dprintk(1, KERN_ERR
- "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n",
- ZR_DEVNAME(zr), buf->type, fh->map_mode);
- res = -EINVAL;
- return res;
- }
-
- res = zoran_jpg_queue_frame(fh, buf->index, codec_mode);
- if (res != 0)
- return res;
- if (zr->codec_mode == BUZ_MODE_IDLE &&
- fh->buffers.active == ZORAN_LOCKED)
- zr36057_enable_jpg(zr, codec_mode);
-
- break;
-
- default:
- dprintk(1, KERN_ERR
- "%s: VIDIOC_QBUF - unsupported type %d\n",
- ZR_DEVNAME(zr), buf->type);
- res = -EINVAL;
- break;
- }
- return res;
-}
-
-static int zoran_dqbuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
- int res = 0, buf_type, num = -1; /* compiler borks here (?) */
-
- switch (fh->map_mode) {
- case ZORAN_MAP_MODE_RAW:
- if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
- dprintk(1, KERN_ERR
- "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n",
- ZR_DEVNAME(zr), buf->type, fh->map_mode);
- res = -EINVAL;
- return res;
- }
-
- num = zr->v4l_pend[zr->v4l_sync_tail & V4L_MASK_FRAME];
- if (file->f_flags & O_NONBLOCK &&
- zr->v4l_buffers.buffer[num].state != BUZ_STATE_DONE) {
- res = -EAGAIN;
- return res;
- }
- res = v4l_sync(fh, num);
- if (res)
- return res;
- zr->v4l_sync_tail++;
- res = zoran_v4l2_buffer_status(fh, buf, num);
- break;
-
- case ZORAN_MAP_MODE_JPG_REC:
- case ZORAN_MAP_MODE_JPG_PLAY:
- {
- struct zoran_sync bs;
-
- if (fh->map_mode == ZORAN_MAP_MODE_JPG_PLAY)
- buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
- else
- buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
- if (buf->type != buf_type) {
- dprintk(1, KERN_ERR
- "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n",
- ZR_DEVNAME(zr), buf->type, fh->map_mode);
- res = -EINVAL;
- return res;
- }
-
- num = zr->jpg_pend[zr->jpg_que_tail & BUZ_MASK_FRAME];
-
- if (file->f_flags & O_NONBLOCK &&
- zr->jpg_buffers.buffer[num].state != BUZ_STATE_DONE) {
- res = -EAGAIN;
- return res;
- }
- bs.frame = 0; /* suppress compiler warning */
- res = jpg_sync(fh, &bs);
- if (res)
- return res;
- res = zoran_v4l2_buffer_status(fh, buf, bs.frame);
- break;
- }
-
- default:
- dprintk(1, KERN_ERR
- "%s: VIDIOC_DQBUF - unsupported type %d\n",
- ZR_DEVNAME(zr), buf->type);
- res = -EINVAL;
- break;
- }
- return res;
-}
-
-static int zoran_streamon(struct file *file, void *__fh, enum v4l2_buf_type type)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
- int res = 0;
-
- switch (fh->map_mode) {
- case ZORAN_MAP_MODE_RAW: /* raw capture */
- if (zr->v4l_buffers.active != ZORAN_ACTIVE ||
- fh->buffers.active != ZORAN_ACTIVE) {
- res = -EBUSY;
- return res;
- }
-
- zr->v4l_buffers.active = fh->buffers.active = ZORAN_LOCKED;
- zr->v4l_settings = fh->v4l_settings;
-
- zr->v4l_sync_tail = zr->v4l_pend_tail;
- if (!zr->v4l_memgrab_active &&
- zr->v4l_pend_head != zr->v4l_pend_tail) {
- zr36057_set_memgrab(zr, 1);
- }
- break;
-
- case ZORAN_MAP_MODE_JPG_REC:
- case ZORAN_MAP_MODE_JPG_PLAY:
- /* what is the codec mode right now? */
- if (zr->jpg_buffers.active != ZORAN_ACTIVE ||
- fh->buffers.active != ZORAN_ACTIVE) {
- res = -EBUSY;
- return res;
- }
-
- zr->jpg_buffers.active = fh->buffers.active = ZORAN_LOCKED;
-
- if (zr->jpg_que_head != zr->jpg_que_tail) {
- /* Start the jpeg codec when the first frame is queued */
- jpeg_start(zr);
- }
- break;
-
- default:
- dprintk(1,
- KERN_ERR
- "%s: VIDIOC_STREAMON - invalid map mode %d\n",
- ZR_DEVNAME(zr), fh->map_mode);
- res = -EINVAL;
- break;
- }
- return res;
-}
-
-static int zoran_streamoff(struct file *file, void *__fh, enum v4l2_buf_type type)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
- int i, res = 0;
- unsigned long flags;
-
- switch (fh->map_mode) {
- case ZORAN_MAP_MODE_RAW: /* raw capture */
- if (fh->buffers.active == ZORAN_FREE &&
- zr->v4l_buffers.active != ZORAN_FREE) {
- res = -EPERM; /* stay off other's settings! */
- return res;
- }
- if (zr->v4l_buffers.active == ZORAN_FREE)
- return res;
-
- spin_lock_irqsave(&zr->spinlock, flags);
- /* unload capture */
- if (zr->v4l_memgrab_active) {
-
- zr36057_set_memgrab(zr, 0);
- }
-
- for (i = 0; i < fh->buffers.num_buffers; i++)
- zr->v4l_buffers.buffer[i].state = BUZ_STATE_USER;
- fh->buffers = zr->v4l_buffers;
-
- zr->v4l_buffers.active = fh->buffers.active = ZORAN_FREE;
-
- zr->v4l_grab_seq = 0;
- zr->v4l_pend_head = zr->v4l_pend_tail = 0;
- zr->v4l_sync_tail = 0;
-
- spin_unlock_irqrestore(&zr->spinlock, flags);
-
- break;
-
- case ZORAN_MAP_MODE_JPG_REC:
- case ZORAN_MAP_MODE_JPG_PLAY:
- if (fh->buffers.active == ZORAN_FREE &&
- zr->jpg_buffers.active != ZORAN_FREE) {
- res = -EPERM; /* stay off other's settings! */
- return res;
- }
- if (zr->jpg_buffers.active == ZORAN_FREE)
- return res;
-
- res = jpg_qbuf(fh, -1,
- (fh->map_mode == ZORAN_MAP_MODE_JPG_REC) ?
- BUZ_MODE_MOTION_COMPRESS :
- BUZ_MODE_MOTION_DECOMPRESS);
- if (res)
- return res;
- break;
- default:
- dprintk(1, KERN_ERR
- "%s: VIDIOC_STREAMOFF - invalid map mode %d\n",
- ZR_DEVNAME(zr), fh->map_mode);
- res = -EINVAL;
- break;
- }
- return res;
-}
-static int zoran_g_std(struct file *file, void *__fh, v4l2_std_id *std)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
-
- *std = zr->norm;
- return 0;
-}
-
-static int zoran_s_std(struct file *file, void *__fh, v4l2_std_id std)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
- int res = 0;
-
- res = zoran_set_norm(zr, std);
- if (res)
- return res;
-
- res = wait_grab_pending(zr);
- return res;
-}
-
-static int zoran_enum_input(struct file *file, void *__fh,
- struct v4l2_input *inp)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
-
- if (inp->index >= zr->card.inputs)
- return -EINVAL;
-
- strscpy(inp->name, zr->card.input[inp->index].name,
- sizeof(inp->name));
- inp->type = V4L2_INPUT_TYPE_CAMERA;
- inp->std = V4L2_STD_ALL;
-
- /* Get status of video decoder */
- decoder_call(zr, video, g_input_status, &inp->status);
- return 0;
-}
-
-static int zoran_g_input(struct file *file, void *__fh, unsigned int *input)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
-
- *input = zr->input;
-
- return 0;
-}
-
-static int zoran_s_input(struct file *file, void *__fh, unsigned int input)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
- int res;
-
- res = zoran_set_input(zr, input);
- if (res)
- return res;
-
- /* Make sure the changes come into effect */
- res = wait_grab_pending(zr);
- return res;
-}
-
-static int zoran_enum_output(struct file *file, void *__fh,
- struct v4l2_output *outp)
-{
- if (outp->index != 0)
- return -EINVAL;
-
- outp->index = 0;
- outp->type = V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY;
- strscpy(outp->name, "Autodetect", sizeof(outp->name));
-
- return 0;
-}
-
-static int zoran_g_output(struct file *file, void *__fh, unsigned int *output)
-{
- *output = 0;
-
- return 0;
-}
-
-static int zoran_s_output(struct file *file, void *__fh, unsigned int output)
-{
- if (output != 0)
- return -EINVAL;
-
- return 0;
-}
-
-/* cropping (sub-frame capture) */
-static int zoran_g_selection(struct file *file, void *__fh, struct v4l2_selection *sel)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
-
- if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT &&
- sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- if (fh->map_mode == ZORAN_MAP_MODE_RAW) {
- dprintk(1, KERN_ERR
- "%s: VIDIOC_G_SELECTION - subcapture only supported for compressed capture\n",
- ZR_DEVNAME(zr));
- return -EINVAL;
- }
-
- switch (sel->target) {
- case V4L2_SEL_TGT_CROP:
- sel->r.top = fh->jpg_settings.img_y;
- sel->r.left = fh->jpg_settings.img_x;
- sel->r.width = fh->jpg_settings.img_width;
- sel->r.height = fh->jpg_settings.img_height;
- break;
- case V4L2_SEL_TGT_CROP_DEFAULT:
- sel->r.top = sel->r.left = 0;
- sel->r.width = BUZ_MIN_WIDTH;
- sel->r.height = BUZ_MIN_HEIGHT;
- break;
- case V4L2_SEL_TGT_CROP_BOUNDS:
- sel->r.top = sel->r.left = 0;
- sel->r.width = BUZ_MAX_WIDTH;
- sel->r.height = BUZ_MAX_HEIGHT;
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static int zoran_s_selection(struct file *file, void *__fh, struct v4l2_selection *sel)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
- struct zoran_jpg_settings settings;
- int res;
-
- if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT &&
- sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- if (sel->target != V4L2_SEL_TGT_CROP)
- return -EINVAL;
-
- if (fh->map_mode == ZORAN_MAP_MODE_RAW) {
- dprintk(1, KERN_ERR
- "%s: VIDIOC_S_SELECTION - subcapture only supported for compressed capture\n",
- ZR_DEVNAME(zr));
- return -EINVAL;
- }
-
- settings = fh->jpg_settings;
-
- if (fh->buffers.allocated) {
- dprintk(1, KERN_ERR
- "%s: VIDIOC_S_SELECTION - cannot change settings while active\n",
- ZR_DEVNAME(zr));
- return -EBUSY;
- }
-
- /* move into a form that we understand */
- settings.img_x = sel->r.left;
- settings.img_y = sel->r.top;
- settings.img_width = sel->r.width;
- settings.img_height = sel->r.height;
-
- /* check validity */
- res = zoran_check_jpg_settings(zr, &settings, 0);
- if (res)
- return res;
-
- /* accept */
- fh->jpg_settings = settings;
- return res;
-}
-
-static int zoran_g_jpegcomp(struct file *file, void *__fh,
- struct v4l2_jpegcompression *params)
-{
- struct zoran_fh *fh = __fh;
- memset(params, 0, sizeof(*params));
-
- params->quality = fh->jpg_settings.jpg_comp.quality;
- params->APPn = fh->jpg_settings.jpg_comp.APPn;
- memcpy(params->APP_data,
- fh->jpg_settings.jpg_comp.APP_data,
- fh->jpg_settings.jpg_comp.APP_len);
- params->APP_len = fh->jpg_settings.jpg_comp.APP_len;
- memcpy(params->COM_data,
- fh->jpg_settings.jpg_comp.COM_data,
- fh->jpg_settings.jpg_comp.COM_len);
- params->COM_len = fh->jpg_settings.jpg_comp.COM_len;
- params->jpeg_markers =
- fh->jpg_settings.jpg_comp.jpeg_markers;
-
- return 0;
-}
-
-static int zoran_s_jpegcomp(struct file *file, void *__fh,
- const struct v4l2_jpegcompression *params)
-{
- struct zoran_fh *fh = __fh;
- struct zoran *zr = fh->zr;
- int res = 0;
- struct zoran_jpg_settings settings;
-
- settings = fh->jpg_settings;
-
- settings.jpg_comp = *params;
-
- if (fh->buffers.active != ZORAN_FREE) {
- dprintk(1, KERN_WARNING
- "%s: VIDIOC_S_JPEGCOMP called while in playback/capture mode\n",
- ZR_DEVNAME(zr));
- res = -EBUSY;
- return res;
- }
-
- res = zoran_check_jpg_settings(zr, &settings, 0);
- if (res)
- return res;
- if (!fh->buffers.allocated)
- fh->buffers.buffer_size =
- zoran_v4l2_calc_bufsize(&fh->jpg_settings);
- fh->jpg_settings.jpg_comp = settings.jpg_comp;
- return res;
-}
-
-static __poll_t
-zoran_poll (struct file *file,
- poll_table *wait)
-{
- struct zoran_fh *fh = file->private_data;
- struct zoran *zr = fh->zr;
- __poll_t res = v4l2_ctrl_poll(file, wait);
- int frame;
- unsigned long flags;
-
- /* we should check whether buffers are ready to be synced on
- * (w/o waits - O_NONBLOCK) here
- * if ready for read (sync), return EPOLLIN|EPOLLRDNORM,
- * if ready for write (sync), return EPOLLOUT|EPOLLWRNORM,
- * if error, return EPOLLERR,
- * if no buffers queued or so, return EPOLLNVAL
- */
-
- switch (fh->map_mode) {
- case ZORAN_MAP_MODE_RAW:
- poll_wait(file, &zr->v4l_capq, wait);
- frame = zr->v4l_pend[zr->v4l_sync_tail & V4L_MASK_FRAME];
-
- spin_lock_irqsave(&zr->spinlock, flags);
- dprintk(3,
- KERN_DEBUG
- "%s: %s() raw - active=%c, sync_tail=%lu/%c, pend_tail=%lu, pend_head=%lu\n",
- ZR_DEVNAME(zr), __func__,
- "FAL"[fh->buffers.active], zr->v4l_sync_tail,
- "UPMD"[zr->v4l_buffers.buffer[frame].state],
- zr->v4l_pend_tail, zr->v4l_pend_head);
- /* Process is the one capturing? */
- if (fh->buffers.active != ZORAN_FREE &&
- /* Buffer ready to DQBUF? */
- zr->v4l_buffers.buffer[frame].state == BUZ_STATE_DONE)
- res |= EPOLLIN | EPOLLRDNORM;
- spin_unlock_irqrestore(&zr->spinlock, flags);
-
- break;
-
- case ZORAN_MAP_MODE_JPG_REC:
- case ZORAN_MAP_MODE_JPG_PLAY:
- poll_wait(file, &zr->jpg_capq, wait);
- frame = zr->jpg_pend[zr->jpg_que_tail & BUZ_MASK_FRAME];
-
- spin_lock_irqsave(&zr->spinlock, flags);
- dprintk(3,
- KERN_DEBUG
- "%s: %s() jpg - active=%c, que_tail=%lu/%c, que_head=%lu, dma=%lu/%lu\n",
- ZR_DEVNAME(zr), __func__,
- "FAL"[fh->buffers.active], zr->jpg_que_tail,
- "UPMD"[zr->jpg_buffers.buffer[frame].state],
- zr->jpg_que_head, zr->jpg_dma_tail, zr->jpg_dma_head);
- if (fh->buffers.active != ZORAN_FREE &&
- zr->jpg_buffers.buffer[frame].state == BUZ_STATE_DONE) {
- if (fh->map_mode == ZORAN_MAP_MODE_JPG_REC)
- res |= EPOLLIN | EPOLLRDNORM;
- else
- res |= EPOLLOUT | EPOLLWRNORM;
- }
- spin_unlock_irqrestore(&zr->spinlock, flags);
-
- break;
-
- default:
- dprintk(1,
- KERN_ERR
- "%s: %s - internal error, unknown map_mode=%d\n",
- ZR_DEVNAME(zr), __func__, fh->map_mode);
- res |= EPOLLERR;
- }
-
- return res;
-}
-
-
-/*
- * This maps the buffers to user space.
- *
- * Depending on the state of fh->map_mode
- * the V4L or the MJPEG buffers are mapped
- * per buffer or all together
- *
- * Note that we need to connect to some
- * unmap signal event to unmap the de-allocate
- * the buffer accordingly (zoran_vm_close())
- */
-
-static void
-zoran_vm_open (struct vm_area_struct *vma)
-{
- struct zoran_mapping *map = vma->vm_private_data;
- atomic_inc(&map->count);
-}
-
-static void
-zoran_vm_close (struct vm_area_struct *vma)
-{
- struct zoran_mapping *map = vma->vm_private_data;
- struct zoran_fh *fh = map->fh;
- struct zoran *zr = fh->zr;
- int i;
-
- dprintk(3, KERN_INFO "%s: %s - munmap(%s)\n", ZR_DEVNAME(zr),
- __func__, mode_name(fh->map_mode));
-
- for (i = 0; i < fh->buffers.num_buffers; i++) {
- if (fh->buffers.buffer[i].map == map)
- fh->buffers.buffer[i].map = NULL;
- }
- kfree(map);
-
- /* Any buffers still mapped? */
- for (i = 0; i < fh->buffers.num_buffers; i++) {
- if (fh->buffers.buffer[i].map) {
- return;
- }
- }
-
- dprintk(3, KERN_INFO "%s: %s - free %s buffers\n", ZR_DEVNAME(zr),
- __func__, mode_name(fh->map_mode));
-
- if (fh->map_mode == ZORAN_MAP_MODE_RAW) {
- if (fh->buffers.active != ZORAN_FREE) {
- unsigned long flags;
-
- spin_lock_irqsave(&zr->spinlock, flags);
- zr36057_set_memgrab(zr, 0);
- zr->v4l_buffers.allocated = 0;
- zr->v4l_buffers.active = fh->buffers.active = ZORAN_FREE;
- spin_unlock_irqrestore(&zr->spinlock, flags);
- }
- v4l_fbuffer_free(fh);
- } else {
- if (fh->buffers.active != ZORAN_FREE) {
- jpg_qbuf(fh, -1, zr->codec_mode);
- zr->jpg_buffers.allocated = 0;
- zr->jpg_buffers.active = fh->buffers.active = ZORAN_FREE;
- }
- jpg_fbuffer_free(fh);
- }
-}
-
-static const struct vm_operations_struct zoran_vm_ops = {
- .open = zoran_vm_open,
- .close = zoran_vm_close,
-};
-
-static int
-zoran_mmap (struct file *file,
- struct vm_area_struct *vma)
-{
- struct zoran_fh *fh = file->private_data;
- struct zoran *zr = fh->zr;
- unsigned long size = (vma->vm_end - vma->vm_start);
- unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
- int i, j;
- unsigned long page, start = vma->vm_start, todo, pos, fraglen;
- int first, last;
- struct zoran_mapping *map;
- int res = 0;
-
- dprintk(3,
- KERN_INFO "%s: %s(%s) of 0x%08lx-0x%08lx (size=%lu)\n",
- ZR_DEVNAME(zr), __func__,
- mode_name(fh->map_mode), vma->vm_start, vma->vm_end, size);
-
- if (!(vma->vm_flags & VM_SHARED) || !(vma->vm_flags & VM_READ) ||
- !(vma->vm_flags & VM_WRITE)) {
- dprintk(1,
- KERN_ERR
- "%s: %s - no MAP_SHARED/PROT_{READ,WRITE} given\n",
- ZR_DEVNAME(zr), __func__);
- return -EINVAL;
- }
-
- if (!fh->buffers.allocated) {
- dprintk(1,
- KERN_ERR
- "%s: %s(%s) - buffers not yet allocated\n",
- ZR_DEVNAME(zr), __func__, mode_name(fh->map_mode));
- res = -ENOMEM;
- return res;
- }
-
- first = offset / fh->buffers.buffer_size;
- last = first - 1 + size / fh->buffers.buffer_size;
- if (offset % fh->buffers.buffer_size != 0 ||
- size % fh->buffers.buffer_size != 0 || first < 0 ||
- last < 0 || first >= fh->buffers.num_buffers ||
- last >= fh->buffers.buffer_size) {
- dprintk(1,
- KERN_ERR
- "%s: %s(%s) - offset=%lu or size=%lu invalid for bufsize=%d and numbufs=%d\n",
- ZR_DEVNAME(zr), __func__, mode_name(fh->map_mode), offset, size,
- fh->buffers.buffer_size,
- fh->buffers.num_buffers);
- res = -EINVAL;
- return res;
- }
-
- /* Check if any buffers are already mapped */
- for (i = first; i <= last; i++) {
- if (fh->buffers.buffer[i].map) {
- dprintk(1,
- KERN_ERR
- "%s: %s(%s) - buffer %d already mapped\n",
- ZR_DEVNAME(zr), __func__, mode_name(fh->map_mode), i);
- res = -EBUSY;
- return res;
- }
- }
-
- /* map these buffers */
- map = kmalloc(sizeof(struct zoran_mapping), GFP_KERNEL);
- if (!map) {
- res = -ENOMEM;
- return res;
- }
- map->fh = fh;
- atomic_set(&map->count, 1);
-
- vma->vm_ops = &zoran_vm_ops;
- vma->vm_flags |= VM_DONTEXPAND;
- vma->vm_private_data = map;
-
- if (fh->map_mode == ZORAN_MAP_MODE_RAW) {
- for (i = first; i <= last; i++) {
- todo = size;
- if (todo > fh->buffers.buffer_size)
- todo = fh->buffers.buffer_size;
- page = fh->buffers.buffer[i].v4l.fbuffer_phys;
- if (remap_pfn_range(vma, start, page >> PAGE_SHIFT,
- todo, PAGE_SHARED)) {
- dprintk(1,
- KERN_ERR
- "%s: %s(V4L) - remap_pfn_range failed\n",
- ZR_DEVNAME(zr), __func__);
- res = -EAGAIN;
- return res;
- }
- size -= todo;
- start += todo;
- fh->buffers.buffer[i].map = map;
- if (size == 0)
- break;
- }
- } else {
- for (i = first; i <= last; i++) {
- for (j = 0;
- j < fh->buffers.buffer_size / PAGE_SIZE;
- j++) {
- fraglen =
- (le32_to_cpu(fh->buffers.buffer[i].jpg.
- frag_tab[2 * j + 1]) & ~1) << 1;
- todo = size;
- if (todo > fraglen)
- todo = fraglen;
- pos =
- le32_to_cpu(fh->buffers.
- buffer[i].jpg.frag_tab[2 * j]);
- /* should just be pos on i386 */
- page = virt_to_phys(bus_to_virt(pos))
- >> PAGE_SHIFT;
- if (remap_pfn_range(vma, start, page,
- todo, PAGE_SHARED)) {
- dprintk(1,
- KERN_ERR
- "%s: %s(V4L) - remap_pfn_range failed\n",
- ZR_DEVNAME(zr), __func__);
- res = -EAGAIN;
- return res;
- }
- size -= todo;
- start += todo;
- if (size == 0)
- break;
- if (le32_to_cpu(fh->buffers.buffer[i].jpg.
- frag_tab[2 * j + 1]) & 1)
- break; /* was last fragment */
- }
- fh->buffers.buffer[i].map = map;
- if (size == 0)
- break;
-
- }
- }
- return res;
-}
-
-static const struct v4l2_ioctl_ops zoran_ioctl_ops = {
- .vidioc_querycap = zoran_querycap,
- .vidioc_s_selection = zoran_s_selection,
- .vidioc_g_selection = zoran_g_selection,
- .vidioc_enum_input = zoran_enum_input,
- .vidioc_g_input = zoran_g_input,
- .vidioc_s_input = zoran_s_input,
- .vidioc_enum_output = zoran_enum_output,
- .vidioc_g_output = zoran_g_output,
- .vidioc_s_output = zoran_s_output,
- .vidioc_g_fbuf = zoran_g_fbuf,
- .vidioc_s_fbuf = zoran_s_fbuf,
- .vidioc_g_std = zoran_g_std,
- .vidioc_s_std = zoran_s_std,
- .vidioc_g_jpegcomp = zoran_g_jpegcomp,
- .vidioc_s_jpegcomp = zoran_s_jpegcomp,
- .vidioc_overlay = zoran_overlay,
- .vidioc_reqbufs = zoran_reqbufs,
- .vidioc_querybuf = zoran_querybuf,
- .vidioc_qbuf = zoran_qbuf,
- .vidioc_dqbuf = zoran_dqbuf,
- .vidioc_streamon = zoran_streamon,
- .vidioc_streamoff = zoran_streamoff,
- .vidioc_enum_fmt_vid_cap = zoran_enum_fmt_vid_cap,
- .vidioc_enum_fmt_vid_out = zoran_enum_fmt_vid_out,
- .vidioc_enum_fmt_vid_overlay = zoran_enum_fmt_vid_overlay,
- .vidioc_g_fmt_vid_cap = zoran_g_fmt_vid_cap,
- .vidioc_g_fmt_vid_out = zoran_g_fmt_vid_out,
- .vidioc_g_fmt_vid_overlay = zoran_g_fmt_vid_overlay,
- .vidioc_s_fmt_vid_cap = zoran_s_fmt_vid_cap,
- .vidioc_s_fmt_vid_out = zoran_s_fmt_vid_out,
- .vidioc_s_fmt_vid_overlay = zoran_s_fmt_vid_overlay,
- .vidioc_try_fmt_vid_cap = zoran_try_fmt_vid_cap,
- .vidioc_try_fmt_vid_out = zoran_try_fmt_vid_out,
- .vidioc_try_fmt_vid_overlay = zoran_try_fmt_vid_overlay,
- .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
- .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
-};
-
-static const struct v4l2_file_operations zoran_fops = {
- .owner = THIS_MODULE,
- .open = zoran_open,
- .release = zoran_close,
- .unlocked_ioctl = video_ioctl2,
- .mmap = zoran_mmap,
- .poll = zoran_poll,
-};
-
-const struct video_device zoran_template = {
- .name = ZORAN_NAME,
- .fops = &zoran_fops,
- .ioctl_ops = &zoran_ioctl_ops,
- .release = &zoran_vdev_release,
- .tvnorms = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM,
-};
-
+++ /dev/null
-/*
- * Zoran zr36057/zr36067 PCI controller driver, for the
- * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux
- * Media Labs LML33/LML33R10.
- *
- * This part handles the procFS entries (/proc/ZORAN[%d])
- *
- * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
- *
- * Currently maintained by:
- * Ronald Bultje <rbultje@ronald.bitfreak.net>
- * Laurent Pinchart <laurent.pinchart@skynet.be>
- * Mailinglist <mjpeg-users@lists.sf.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/vmalloc.h>
-
-#include <linux/proc_fs.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/videodev2.h>
-#include <linux/spinlock.h>
-#include <linux/sem.h>
-#include <linux/seq_file.h>
-
-#include <linux/ctype.h>
-#include <linux/poll.h>
-#include <asm/io.h>
-
-#include "videocodec.h"
-#include "zoran.h"
-#include "zoran_procfs.h"
-#include "zoran_card.h"
-
-#ifdef CONFIG_PROC_FS
-struct procfs_params_zr36067 {
- char *name;
- short reg;
- u32 mask;
- short bit;
-};
-
-static const struct procfs_params_zr36067 zr67[] = {
- {"HSPol", 0x000, 1, 30},
- {"HStart", 0x000, 0x3ff, 10},
- {"HEnd", 0x000, 0x3ff, 0},
-
- {"VSPol", 0x004, 1, 30},
- {"VStart", 0x004, 0x3ff, 10},
- {"VEnd", 0x004, 0x3ff, 0},
-
- {"ExtFl", 0x008, 1, 26},
- {"TopField", 0x008, 1, 25},
- {"VCLKPol", 0x008, 1, 24},
- {"DupFld", 0x008, 1, 20},
- {"LittleEndian", 0x008, 1, 0},
-
- {"HsyncStart", 0x10c, 0xffff, 16},
- {"LineTot", 0x10c, 0xffff, 0},
-
- {"NAX", 0x110, 0xffff, 16},
- {"PAX", 0x110, 0xffff, 0},
-
- {"NAY", 0x114, 0xffff, 16},
- {"PAY", 0x114, 0xffff, 0},
-
- /* {"",,,}, */
-
- {NULL, 0, 0, 0},
-};
-
-static void
-setparam (struct zoran *zr,
- char *name,
- char *sval)
-{
- int i = 0, reg0, reg, val;
-
- while (zr67[i].name != NULL) {
- if (!strncmp(name, zr67[i].name, strlen(zr67[i].name))) {
- reg = reg0 = btread(zr67[i].reg);
- reg &= ~(zr67[i].mask << zr67[i].bit);
- if (!isdigit(sval[0]))
- break;
- val = simple_strtoul(sval, NULL, 0);
- if ((val & ~zr67[i].mask))
- break;
- reg |= (val & zr67[i].mask) << zr67[i].bit;
- dprintk(4,
- KERN_INFO
- "%s: setparam: setting ZR36067 register 0x%03x: 0x%08x=>0x%08x %s=%d\n",
- ZR_DEVNAME(zr), zr67[i].reg, reg0, reg,
- zr67[i].name, val);
- btwrite(reg, zr67[i].reg);
- break;
- }
- i++;
- }
-}
-
-static int zoran_show(struct seq_file *p, void *v)
-{
- struct zoran *zr = p->private;
- int i;
-
- seq_printf(p, "ZR36067 registers:\n");
- for (i = 0; i < 0x130; i += 16)
- seq_printf(p, "%03X %08X %08X %08X %08X \n", i,
- btread(i), btread(i+4), btread(i+8), btread(i+12));
- return 0;
-}
-
-static int zoran_open(struct inode *inode, struct file *file)
-{
- struct zoran *data = PDE_DATA(inode);
- return single_open(file, zoran_show, data);
-}
-
-static ssize_t zoran_write(struct file *file, const char __user *buffer,
- size_t count, loff_t *ppos)
-{
- struct zoran *zr = PDE_DATA(file_inode(file));
- char *string, *sp;
- char *line, *ldelim, *varname, *svar, *tdelim;
-
- if (count > 32768) /* Stupidity filter */
- return -EINVAL;
-
- string = sp = vmalloc(count + 1);
- if (!string) {
- dprintk(1,
- KERN_ERR
- "%s: write_proc: can not allocate memory\n",
- ZR_DEVNAME(zr));
- return -ENOMEM;
- }
- if (copy_from_user(string, buffer, count)) {
- vfree (string);
- return -EFAULT;
- }
- string[count] = 0;
- dprintk(4, KERN_INFO "%s: write_proc: name=%pD count=%zu zr=%p\n",
- ZR_DEVNAME(zr), file, count, zr);
- ldelim = " \t\n";
- tdelim = "=";
- line = strpbrk(sp, ldelim);
- while (line) {
- *line = 0;
- svar = strpbrk(sp, tdelim);
- if (svar) {
- *svar = 0;
- varname = sp;
- svar++;
- setparam(zr, varname, svar);
- }
- sp = line + 1;
- line = strpbrk(sp, ldelim);
- }
- vfree(string);
-
- return count;
-}
-
-static const struct file_operations zoran_operations = {
- .owner = THIS_MODULE,
- .open = zoran_open,
- .read = seq_read,
- .write = zoran_write,
- .llseek = seq_lseek,
- .release = single_release,
-};
-#endif
-
-int
-zoran_proc_init (struct zoran *zr)
-{
-#ifdef CONFIG_PROC_FS
- char name[8];
-
- snprintf(name, 7, "zoran%d", zr->id);
- zr->zoran_proc = proc_create_data(name, 0, NULL, &zoran_operations, zr);
- if (zr->zoran_proc != NULL) {
- dprintk(2,
- KERN_INFO
- "%s: procfs entry /proc/%s allocated. data=%p\n",
- ZR_DEVNAME(zr), name, zr);
- } else {
- dprintk(1, KERN_ERR "%s: Unable to initialise /proc/%s\n",
- ZR_DEVNAME(zr), name);
- return 1;
- }
-#endif
- return 0;
-}
-
-void
-zoran_proc_cleanup (struct zoran *zr)
-{
-#ifdef CONFIG_PROC_FS
- char name[8];
-
- snprintf(name, 7, "zoran%d", zr->id);
- if (zr->zoran_proc)
- remove_proc_entry(name, NULL);
- zr->zoran_proc = NULL;
-#endif
-}
+++ /dev/null
-/*
- * Zoran zr36057/zr36067 PCI controller driver, for the
- * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux
- * Media Labs LML33/LML33R10.
- *
- * This part handles card-specific data and detection
- *
- * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
- *
- * Currently maintained by:
- * Ronald Bultje <rbultje@ronald.bitfreak.net>
- * Laurent Pinchart <laurent.pinchart@skynet.be>
- * Mailinglist <mjpeg-users@lists.sf.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ZORAN_PROCFS_H__
-#define __ZORAN_PROCFS_H__
-
-extern int zoran_proc_init(struct zoran *zr);
-extern void zoran_proc_cleanup(struct zoran *zr);
-
-#endif /* __ZORAN_PROCFS_H__ */
+++ /dev/null
-/*
- * Zoran ZR36016 basic configuration functions
- *
- * Copyright (C) 2001 Wolfgang Scherr <scherr@net4you.at>
- *
- * $Id: zr36016.c,v 1.1.2.14 2003/08/20 19:46:55 rbultje Exp $
- *
- * ------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * ------------------------------------------------------------------------
- */
-
-#define ZR016_VERSION "v0.7"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include <linux/types.h>
-#include <linux/wait.h>
-
-/* I/O commands, error codes */
-#include <asm/io.h>
-
-/* v4l API */
-
-/* headerfile of this module */
-#include "zr36016.h"
-
-/* codec io API */
-#include "videocodec.h"
-
-/* it doesn't make sense to have more than 20 or so,
- just to prevent some unwanted loops */
-#define MAX_CODECS 20
-
-/* amount of chips attached via this driver */
-static int zr36016_codecs;
-
-/* debugging is available via module parameter */
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-4)");
-
-#define dprintk(num, format, args...) \
- do { \
- if (debug >= num) \
- printk(format, ##args); \
- } while (0)
-
-/* =========================================================================
- Local hardware I/O functions:
-
- read/write via codec layer (registers are located in the master device)
- ========================================================================= */
-
-/* read and write functions */
-static u8
-zr36016_read (struct zr36016 *ptr,
- u16 reg)
-{
- u8 value = 0;
-
- // just in case something is wrong...
- if (ptr->codec->master_data->readreg)
- value =
- (ptr->codec->master_data->
- readreg(ptr->codec, reg)) & 0xFF;
- else
- dprintk(1,
- KERN_ERR "%s: invalid I/O setup, nothing read!\n",
- ptr->name);
-
- dprintk(4, "%s: reading from 0x%04x: %02x\n", ptr->name, reg,
- value);
-
- return value;
-}
-
-static void
-zr36016_write (struct zr36016 *ptr,
- u16 reg,
- u8 value)
-{
- dprintk(4, "%s: writing 0x%02x to 0x%04x\n", ptr->name, value,
- reg);
-
- // just in case something is wrong...
- if (ptr->codec->master_data->writereg) {
- ptr->codec->master_data->writereg(ptr->codec, reg, value);
- } else
- dprintk(1,
- KERN_ERR
- "%s: invalid I/O setup, nothing written!\n",
- ptr->name);
-}
-
-/* indirect read and write functions */
-/* the 016 supports auto-addr-increment, but
- * writing it all time cost not much and is safer... */
-static u8
-zr36016_readi (struct zr36016 *ptr,
- u16 reg)
-{
- u8 value = 0;
-
- // just in case something is wrong...
- if ((ptr->codec->master_data->writereg) &&
- (ptr->codec->master_data->readreg)) {
- ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F); // ADDR
- value = (ptr->codec->master_data->readreg(ptr->codec, ZR016_IDATA)) & 0xFF; // DATA
- } else
- dprintk(1,
- KERN_ERR
- "%s: invalid I/O setup, nothing read (i)!\n",
- ptr->name);
-
- dprintk(4, "%s: reading indirect from 0x%04x: %02x\n", ptr->name,
- reg, value);
- return value;
-}
-
-static void
-zr36016_writei (struct zr36016 *ptr,
- u16 reg,
- u8 value)
-{
- dprintk(4, "%s: writing indirect 0x%02x to 0x%04x\n", ptr->name,
- value, reg);
-
- // just in case something is wrong...
- if (ptr->codec->master_data->writereg) {
- ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F); // ADDR
- ptr->codec->master_data->writereg(ptr->codec, ZR016_IDATA, value & 0x0FF); // DATA
- } else
- dprintk(1,
- KERN_ERR
- "%s: invalid I/O setup, nothing written (i)!\n",
- ptr->name);
-}
-
-/* =========================================================================
- Local helper function:
-
- version read
- ========================================================================= */
-
-/* version kept in datastructure */
-static u8
-zr36016_read_version (struct zr36016 *ptr)
-{
- ptr->version = zr36016_read(ptr, 0) >> 4;
- return ptr->version;
-}
-
-/* =========================================================================
- Local helper function:
-
- basic test of "connectivity", writes/reads to/from PAX-Lo register
- ========================================================================= */
-
-static int
-zr36016_basic_test (struct zr36016 *ptr)
-{
- if (debug) {
- int i;
- zr36016_writei(ptr, ZR016I_PAX_LO, 0x55);
- dprintk(1, KERN_INFO "%s: registers: ", ptr->name);
- for (i = 0; i <= 0x0b; i++)
- dprintk(1, "%02x ", zr36016_readi(ptr, i));
- dprintk(1, "\n");
- }
- // for testing just write 0, then the default value to a register and read
- // it back in both cases
- zr36016_writei(ptr, ZR016I_PAX_LO, 0x00);
- if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0) {
- dprintk(1,
- KERN_ERR
- "%s: attach failed, can't connect to vfe processor!\n",
- ptr->name);
- return -ENXIO;
- }
- zr36016_writei(ptr, ZR016I_PAX_LO, 0x0d0);
- if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0d0) {
- dprintk(1,
- KERN_ERR
- "%s: attach failed, can't connect to vfe processor!\n",
- ptr->name);
- return -ENXIO;
- }
- // we allow version numbers from 0-3, should be enough, though
- zr36016_read_version(ptr);
- if (ptr->version & 0x0c) {
- dprintk(1,
- KERN_ERR
- "%s: attach failed, suspicious version %d found...\n",
- ptr->name, ptr->version);
- return -ENXIO;
- }
-
- return 0; /* looks good! */
-}
-
-/* =========================================================================
- Local helper function:
-
- simple loop for pushing the init datasets - NO USE --
- ========================================================================= */
-
-#if 0
-static int zr36016_pushit (struct zr36016 *ptr,
- u16 startreg,
- u16 len,
- const char *data)
-{
- int i=0;
-
- dprintk(4, "%s: write data block to 0x%04x (len=%d)\n",
- ptr->name, startreg,len);
- while (i<len) {
- zr36016_writei(ptr, startreg++, data[i++]);
- }
-
- return i;
-}
-#endif
-
-/* =========================================================================
- Basic datasets & init:
-
- //TODO//
- ========================================================================= */
-
-static void
-zr36016_init (struct zr36016 *ptr)
-{
- // stop any processing
- zr36016_write(ptr, ZR016_GOSTOP, 0);
-
- // mode setup (yuv422 in and out, compression/expansuon due to mode)
- zr36016_write(ptr, ZR016_MODE,
- ZR016_YUV422 | ZR016_YUV422_YUV422 |
- (ptr->mode == CODEC_DO_COMPRESSION ?
- ZR016_COMPRESSION : ZR016_EXPANSION));
-
- // misc setup
- zr36016_writei(ptr, ZR016I_SETUP1,
- (ptr->xdec ? (ZR016_HRFL | ZR016_HORZ) : 0) |
- (ptr->ydec ? ZR016_VERT : 0) | ZR016_CNTI);
- zr36016_writei(ptr, ZR016I_SETUP2, ZR016_CCIR);
-
- // Window setup
- // (no extra offset for now, norm defines offset, default width height)
- zr36016_writei(ptr, ZR016I_PAX_HI, ptr->width >> 8);
- zr36016_writei(ptr, ZR016I_PAX_LO, ptr->width & 0xFF);
- zr36016_writei(ptr, ZR016I_PAY_HI, ptr->height >> 8);
- zr36016_writei(ptr, ZR016I_PAY_LO, ptr->height & 0xFF);
- zr36016_writei(ptr, ZR016I_NAX_HI, ptr->xoff >> 8);
- zr36016_writei(ptr, ZR016I_NAX_LO, ptr->xoff & 0xFF);
- zr36016_writei(ptr, ZR016I_NAY_HI, ptr->yoff >> 8);
- zr36016_writei(ptr, ZR016I_NAY_LO, ptr->yoff & 0xFF);
-
- /* shall we continue now, please? */
- zr36016_write(ptr, ZR016_GOSTOP, 1);
-}
-
-/* =========================================================================
- CODEC API FUNCTIONS
-
- this functions are accessed by the master via the API structure
- ========================================================================= */
-
-/* set compression/expansion mode and launches codec -
- this should be the last call from the master before starting processing */
-static int
-zr36016_set_mode (struct videocodec *codec,
- int mode)
-{
- struct zr36016 *ptr = (struct zr36016 *) codec->data;
-
- dprintk(2, "%s: set_mode %d call\n", ptr->name, mode);
-
- if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION))
- return -EINVAL;
-
- ptr->mode = mode;
- zr36016_init(ptr);
-
- return 0;
-}
-
-/* set picture size */
-static int
-zr36016_set_video (struct videocodec *codec,
- struct tvnorm *norm,
- struct vfe_settings *cap,
- struct vfe_polarity *pol)
-{
- struct zr36016 *ptr = (struct zr36016 *) codec->data;
-
- dprintk(2, "%s: set_video %d.%d, %d/%d-%dx%d (0x%x) call\n",
- ptr->name, norm->HStart, norm->VStart,
- cap->x, cap->y, cap->width, cap->height,
- cap->decimation);
-
- /* if () return -EINVAL;
- * trust the master driver that it knows what it does - so
- * we allow invalid startx/y for now ... */
- ptr->width = cap->width;
- ptr->height = cap->height;
- /* (Ronald) This is ugly. zoran_device.c, line 387
- * already mentions what happens if HStart is even
- * (blue faces, etc., cr/cb inversed). There's probably
- * some good reason why HStart is 0 instead of 1, so I'm
- * leaving it to this for now, but really... This can be
- * done a lot simpler */
- ptr->xoff = (norm->HStart ? norm->HStart : 1) + cap->x;
- /* Something to note here (I don't understand it), setting
- * VStart too high will cause the codec to 'not work'. I
- * really don't get it. values of 16 (VStart) already break
- * it here. Just '0' seems to work. More testing needed! */
- ptr->yoff = norm->VStart + cap->y;
- /* (Ronald) dzjeeh, can't this thing do hor_decimation = 4? */
- ptr->xdec = ((cap->decimation & 0xff) == 1) ? 0 : 1;
- ptr->ydec = (((cap->decimation >> 8) & 0xff) == 1) ? 0 : 1;
-
- return 0;
-}
-
-/* additional control functions */
-static int
-zr36016_control (struct videocodec *codec,
- int type,
- int size,
- void *data)
-{
- struct zr36016 *ptr = (struct zr36016 *) codec->data;
- int *ival = (int *) data;
-
- dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type,
- size);
-
- switch (type) {
- case CODEC_G_STATUS: /* get last status - we don't know it ... */
- if (size != sizeof(int))
- return -EFAULT;
- *ival = 0;
- break;
-
- case CODEC_G_CODEC_MODE:
- if (size != sizeof(int))
- return -EFAULT;
- *ival = 0;
- break;
-
- case CODEC_S_CODEC_MODE:
- if (size != sizeof(int))
- return -EFAULT;
- if (*ival != 0)
- return -EINVAL;
- /* not needed, do nothing */
- return 0;
-
- case CODEC_G_VFE:
- case CODEC_S_VFE:
- return 0;
-
- case CODEC_S_MMAP:
- /* not available, give an error */
- return -ENXIO;
-
- default:
- return -EINVAL;
- }
-
- return size;
-}
-
-/* =========================================================================
- Exit and unregister function:
-
- Deinitializes Zoran's JPEG processor
- ========================================================================= */
-
-static int
-zr36016_unset (struct videocodec *codec)
-{
- struct zr36016 *ptr = codec->data;
-
- if (ptr) {
- /* do wee need some codec deinit here, too ???? */
-
- dprintk(1, "%s: finished codec #%d\n", ptr->name,
- ptr->num);
- kfree(ptr);
- codec->data = NULL;
-
- zr36016_codecs--;
- return 0;
- }
-
- return -EFAULT;
-}
-
-/* =========================================================================
- Setup and registry function:
-
- Initializes Zoran's JPEG processor
-
- Also sets pixel size, average code size, mode (compr./decompr.)
- (the given size is determined by the processor with the video interface)
- ========================================================================= */
-
-static int
-zr36016_setup (struct videocodec *codec)
-{
- struct zr36016 *ptr;
- int res;
-
- dprintk(2, "zr36016: initializing VFE subsystem #%d.\n",
- zr36016_codecs);
-
- if (zr36016_codecs == MAX_CODECS) {
- dprintk(1,
- KERN_ERR "zr36016: Can't attach more codecs!\n");
- return -ENOSPC;
- }
- //mem structure init
- codec->data = ptr = kzalloc(sizeof(struct zr36016), GFP_KERNEL);
- if (NULL == ptr) {
- dprintk(1, KERN_ERR "zr36016: Can't get enough memory!\n");
- return -ENOMEM;
- }
-
- snprintf(ptr->name, sizeof(ptr->name), "zr36016[%d]",
- zr36016_codecs);
- ptr->num = zr36016_codecs++;
- ptr->codec = codec;
-
- //testing
- res = zr36016_basic_test(ptr);
- if (res < 0) {
- zr36016_unset(codec);
- return res;
- }
- //final setup
- ptr->mode = CODEC_DO_COMPRESSION;
- ptr->width = 768;
- ptr->height = 288;
- ptr->xdec = 1;
- ptr->ydec = 0;
- zr36016_init(ptr);
-
- dprintk(1, KERN_INFO "%s: codec v%d attached and running\n",
- ptr->name, ptr->version);
-
- return 0;
-}
-
-static const struct videocodec zr36016_codec = {
- .owner = THIS_MODULE,
- .name = "zr36016",
- .magic = 0L, // magic not used
- .flags =
- CODEC_FLAG_HARDWARE | CODEC_FLAG_VFE | CODEC_FLAG_ENCODER |
- CODEC_FLAG_DECODER,
- .type = CODEC_TYPE_ZR36016,
- .setup = zr36016_setup, // functionality
- .unset = zr36016_unset,
- .set_mode = zr36016_set_mode,
- .set_video = zr36016_set_video,
- .control = zr36016_control,
- // others are not used
-};
-
-/* =========================================================================
- HOOK IN DRIVER AS KERNEL MODULE
- ========================================================================= */
-
-static int __init
-zr36016_init_module (void)
-{
- //dprintk(1, "ZR36016 driver %s\n",ZR016_VERSION);
- zr36016_codecs = 0;
- return videocodec_register(&zr36016_codec);
-}
-
-static void __exit
-zr36016_cleanup_module (void)
-{
- if (zr36016_codecs) {
- dprintk(1,
- "zr36016: something's wrong - %d codecs left somehow.\n",
- zr36016_codecs);
- }
- videocodec_unregister(&zr36016_codec);
-}
-
-module_init(zr36016_init_module);
-module_exit(zr36016_cleanup_module);
-
-MODULE_AUTHOR("Wolfgang Scherr <scherr@net4you.at>");
-MODULE_DESCRIPTION("Driver module for ZR36016 video frontends "
- ZR016_VERSION);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Zoran ZR36016 basic configuration functions - header file
- *
- * Copyright (C) 2001 Wolfgang Scherr <scherr@net4you.at>
- *
- * $Id: zr36016.h,v 1.1.2.3 2003/01/14 21:18:07 rbultje Exp $
- *
- * ------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * ------------------------------------------------------------------------
- */
-
-#ifndef ZR36016_H
-#define ZR36016_H
-
-/* data stored for each zoran jpeg codec chip */
-struct zr36016 {
- char name[32];
- int num;
- /* io datastructure */
- struct videocodec *codec;
- // coder status
- __u8 version;
- // actual coder setup
- int mode;
-
- __u16 xoff;
- __u16 yoff;
- __u16 width;
- __u16 height;
- __u16 xdec;
- __u16 ydec;
-};
-
-/* direct register addresses */
-#define ZR016_GOSTOP 0x00
-#define ZR016_MODE 0x01
-#define ZR016_IADDR 0x02
-#define ZR016_IDATA 0x03
-
-/* indirect register addresses */
-#define ZR016I_SETUP1 0x00
-#define ZR016I_SETUP2 0x01
-#define ZR016I_NAX_LO 0x02
-#define ZR016I_NAX_HI 0x03
-#define ZR016I_PAX_LO 0x04
-#define ZR016I_PAX_HI 0x05
-#define ZR016I_NAY_LO 0x06
-#define ZR016I_NAY_HI 0x07
-#define ZR016I_PAY_LO 0x08
-#define ZR016I_PAY_HI 0x09
-#define ZR016I_NOL_LO 0x0a
-#define ZR016I_NOL_HI 0x0b
-
-/* possible values for mode register */
-#define ZR016_RGB444_YUV444 0x00
-#define ZR016_RGB444_YUV422 0x01
-#define ZR016_RGB444_YUV411 0x02
-#define ZR016_RGB444_Y400 0x03
-#define ZR016_RGB444_RGB444 0x04
-#define ZR016_YUV444_YUV444 0x08
-#define ZR016_YUV444_YUV422 0x09
-#define ZR016_YUV444_YUV411 0x0a
-#define ZR016_YUV444_Y400 0x0b
-#define ZR016_YUV444_RGB444 0x0c
-#define ZR016_YUV422_YUV422 0x11
-#define ZR016_YUV422_YUV411 0x12
-#define ZR016_YUV422_Y400 0x13
-#define ZR016_YUV411_YUV411 0x16
-#define ZR016_YUV411_Y400 0x17
-#define ZR016_4444_4444 0x19
-#define ZR016_100_100 0x1b
-
-#define ZR016_RGB444 0x00
-#define ZR016_YUV444 0x20
-#define ZR016_YUV422 0x40
-
-#define ZR016_COMPRESSION 0x80
-#define ZR016_EXPANSION 0x80
-
-/* possible values for setup 1 register */
-#define ZR016_CKRT 0x80
-#define ZR016_VERT 0x40
-#define ZR016_HORZ 0x20
-#define ZR016_HRFL 0x10
-#define ZR016_DSFL 0x08
-#define ZR016_SBFL 0x04
-#define ZR016_RSTR 0x02
-#define ZR016_CNTI 0x01
-
-/* possible values for setup 2 register */
-#define ZR016_SYEN 0x40
-#define ZR016_CCIR 0x04
-#define ZR016_SIGN 0x02
-#define ZR016_YMCS 0x01
-
-#endif /*fndef ZR36016_H */
+++ /dev/null
-/*
- * Zoran ZR36050 basic configuration functions
- *
- * Copyright (C) 2001 Wolfgang Scherr <scherr@net4you.at>
- *
- * $Id: zr36050.c,v 1.1.2.11 2003/08/03 14:54:53 rbultje Exp $
- *
- * ------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * ------------------------------------------------------------------------
- */
-
-#define ZR050_VERSION "v0.7.1"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include <linux/types.h>
-#include <linux/wait.h>
-
-/* I/O commands, error codes */
-#include <asm/io.h>
-
-/* headerfile of this module */
-#include "zr36050.h"
-
-/* codec io API */
-#include "videocodec.h"
-
-/* it doesn't make sense to have more than 20 or so,
- just to prevent some unwanted loops */
-#define MAX_CODECS 20
-
-/* amount of chips attached via this driver */
-static int zr36050_codecs;
-
-/* debugging is available via module parameter */
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-4)");
-
-#define dprintk(num, format, args...) \
- do { \
- if (debug >= num) \
- printk(format, ##args); \
- } while (0)
-
-/* =========================================================================
- Local hardware I/O functions:
-
- read/write via codec layer (registers are located in the master device)
- ========================================================================= */
-
-/* read and write functions */
-static u8
-zr36050_read (struct zr36050 *ptr,
- u16 reg)
-{
- u8 value = 0;
-
- // just in case something is wrong...
- if (ptr->codec->master_data->readreg)
- value = (ptr->codec->master_data->readreg(ptr->codec,
- reg)) & 0xFF;
- else
- dprintk(1,
- KERN_ERR "%s: invalid I/O setup, nothing read!\n",
- ptr->name);
-
- dprintk(4, "%s: reading from 0x%04x: %02x\n", ptr->name, reg,
- value);
-
- return value;
-}
-
-static void
-zr36050_write (struct zr36050 *ptr,
- u16 reg,
- u8 value)
-{
- dprintk(4, "%s: writing 0x%02x to 0x%04x\n", ptr->name, value,
- reg);
-
- // just in case something is wrong...
- if (ptr->codec->master_data->writereg)
- ptr->codec->master_data->writereg(ptr->codec, reg, value);
- else
- dprintk(1,
- KERN_ERR
- "%s: invalid I/O setup, nothing written!\n",
- ptr->name);
-}
-
-/* =========================================================================
- Local helper function:
-
- status read
- ========================================================================= */
-
-/* status is kept in datastructure */
-static u8
-zr36050_read_status1 (struct zr36050 *ptr)
-{
- ptr->status1 = zr36050_read(ptr, ZR050_STATUS_1);
-
- zr36050_read(ptr, 0);
- return ptr->status1;
-}
-
-/* =========================================================================
- Local helper function:
-
- scale factor read
- ========================================================================= */
-
-/* scale factor is kept in datastructure */
-static u16
-zr36050_read_scalefactor (struct zr36050 *ptr)
-{
- ptr->scalefact = (zr36050_read(ptr, ZR050_SF_HI) << 8) |
- (zr36050_read(ptr, ZR050_SF_LO) & 0xFF);
-
- /* leave 0 selected for an eventually GO from master */
- zr36050_read(ptr, 0);
- return ptr->scalefact;
-}
-
-/* =========================================================================
- Local helper function:
-
- wait if codec is ready to proceed (end of processing) or time is over
- ========================================================================= */
-
-static void
-zr36050_wait_end (struct zr36050 *ptr)
-{
- int i = 0;
-
- while (!(zr36050_read_status1(ptr) & 0x4)) {
- udelay(1);
- if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
- dprintk(1,
- "%s: timeout at wait_end (last status: 0x%02x)\n",
- ptr->name, ptr->status1);
- break;
- }
- }
-}
-
-/* =========================================================================
- Local helper function:
-
- basic test of "connectivity", writes/reads to/from memory the SOF marker
- ========================================================================= */
-
-static int
-zr36050_basic_test (struct zr36050 *ptr)
-{
- zr36050_write(ptr, ZR050_SOF_IDX, 0x00);
- zr36050_write(ptr, ZR050_SOF_IDX + 1, 0x00);
- if ((zr36050_read(ptr, ZR050_SOF_IDX) |
- zr36050_read(ptr, ZR050_SOF_IDX + 1)) != 0x0000) {
- dprintk(1,
- KERN_ERR
- "%s: attach failed, can't connect to jpeg processor!\n",
- ptr->name);
- return -ENXIO;
- }
- zr36050_write(ptr, ZR050_SOF_IDX, 0xff);
- zr36050_write(ptr, ZR050_SOF_IDX + 1, 0xc0);
- if (((zr36050_read(ptr, ZR050_SOF_IDX) << 8) |
- zr36050_read(ptr, ZR050_SOF_IDX + 1)) != 0xffc0) {
- dprintk(1,
- KERN_ERR
- "%s: attach failed, can't connect to jpeg processor!\n",
- ptr->name);
- return -ENXIO;
- }
-
- zr36050_wait_end(ptr);
- if ((ptr->status1 & 0x4) == 0) {
- dprintk(1,
- KERN_ERR
- "%s: attach failed, jpeg processor failed (end flag)!\n",
- ptr->name);
- return -EBUSY;
- }
-
- return 0; /* looks good! */
-}
-
-/* =========================================================================
- Local helper function:
-
- simple loop for pushing the init datasets
- ========================================================================= */
-
-static int
-zr36050_pushit (struct zr36050 *ptr,
- u16 startreg,
- u16 len,
- const char *data)
-{
- int i = 0;
-
- dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", ptr->name,
- startreg, len);
- while (i < len) {
- zr36050_write(ptr, startreg++, data[i++]);
- }
-
- return i;
-}
-
-/* =========================================================================
- Basic datasets:
-
- jpeg baseline setup data (you find it on lots places in internet, or just
- extract it from any regular .jpg image...)
-
- Could be variable, but until it's not needed it they are just fixed to save
- memory. Otherwise expand zr36050 structure with arrays, push the values to
- it and initialize from there, as e.g. the linux zr36057/60 driver does it.
- ========================================================================= */
-
-static const char zr36050_dqt[0x86] = {
- 0xff, 0xdb, //Marker: DQT
- 0x00, 0x84, //Length: 2*65+2
- 0x00, //Pq,Tq first table
- 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e,
- 0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28,
- 0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25,
- 0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33,
- 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44,
- 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57,
- 0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71,
- 0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63,
- 0x01, //Pq,Tq second table
- 0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a,
- 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63
-};
-
-static const char zr36050_dht[0x1a4] = {
- 0xff, 0xc4, //Marker: DHT
- 0x01, 0xa2, //Length: 2*AC, 2*DC
- 0x00, //DC first table
- 0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01,
- 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
- 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
- 0x01, //DC second table
- 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
- 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
- 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
- 0x10, //AC first table
- 0x00, 0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03,
- 0x05, 0x05, 0x04, 0x04, 0x00, 0x00,
- 0x01, 0x7D, 0x01, 0x02, 0x03, 0x00, 0x04, 0x11,
- 0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61,
- 0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1,
- 0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24,
- 0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17,
- 0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34,
- 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44,
- 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56,
- 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66,
- 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
- 0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88,
- 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99,
- 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8,
- 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9,
- 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8,
- 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9,
- 0xDA, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
- 0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7,
- 0xF8, 0xF9, 0xFA,
- 0x11, //AC second table
- 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04,
- 0x07, 0x05, 0x04, 0x04, 0x00, 0x01,
- 0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04,
- 0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71,
- 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91,
- 0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62,
- 0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25,
- 0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, 0x28, 0x29, 0x2A,
- 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44,
- 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56,
- 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66,
- 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
- 0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
- 0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98,
- 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7,
- 0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8,
- 0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7,
- 0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8,
- 0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
- 0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8,
- 0xF9, 0xFA
-};
-
-/* jpeg baseline setup, this is just fixed in this driver (YUV pictures) */
-#define NO_OF_COMPONENTS 0x3 //Y,U,V
-#define BASELINE_PRECISION 0x8 //MCU size (?)
-static const char zr36050_tq[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's QT
-static const char zr36050_td[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's DC
-static const char zr36050_ta[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's AC
-
-/* horizontal 422 decimation setup (maybe we support 411 or so later, too) */
-static const char zr36050_decimation_h[8] = { 2, 1, 1, 0, 0, 0, 0, 0 };
-static const char zr36050_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 };
-
-/* =========================================================================
- Local helper functions:
-
- calculation and setup of parameter-dependent JPEG baseline segments
- (needed for compression only)
- ========================================================================= */
-
-/* ------------------------------------------------------------------------- */
-
-/* SOF (start of frame) segment depends on width, height and sampling ratio
- of each color component */
-
-static int
-zr36050_set_sof (struct zr36050 *ptr)
-{
- char sof_data[34]; // max. size of register set
- int i;
-
- dprintk(3, "%s: write SOF (%dx%d, %d components)\n", ptr->name,
- ptr->width, ptr->height, NO_OF_COMPONENTS);
- sof_data[0] = 0xff;
- sof_data[1] = 0xc0;
- sof_data[2] = 0x00;
- sof_data[3] = (3 * NO_OF_COMPONENTS) + 8;
- sof_data[4] = BASELINE_PRECISION; // only '8' possible with zr36050
- sof_data[5] = (ptr->height) >> 8;
- sof_data[6] = (ptr->height) & 0xff;
- sof_data[7] = (ptr->width) >> 8;
- sof_data[8] = (ptr->width) & 0xff;
- sof_data[9] = NO_OF_COMPONENTS;
- for (i = 0; i < NO_OF_COMPONENTS; i++) {
- sof_data[10 + (i * 3)] = i; // index identifier
- sof_data[11 + (i * 3)] = (ptr->h_samp_ratio[i] << 4) | (ptr->v_samp_ratio[i]); // sampling ratios
- sof_data[12 + (i * 3)] = zr36050_tq[i]; // Q table selection
- }
- return zr36050_pushit(ptr, ZR050_SOF_IDX,
- (3 * NO_OF_COMPONENTS) + 10, sof_data);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* SOS (start of scan) segment depends on the used scan components
- of each color component */
-
-static int
-zr36050_set_sos (struct zr36050 *ptr)
-{
- char sos_data[16]; // max. size of register set
- int i;
-
- dprintk(3, "%s: write SOS\n", ptr->name);
- sos_data[0] = 0xff;
- sos_data[1] = 0xda;
- sos_data[2] = 0x00;
- sos_data[3] = 2 + 1 + (2 * NO_OF_COMPONENTS) + 3;
- sos_data[4] = NO_OF_COMPONENTS;
- for (i = 0; i < NO_OF_COMPONENTS; i++) {
- sos_data[5 + (i * 2)] = i; // index
- sos_data[6 + (i * 2)] = (zr36050_td[i] << 4) | zr36050_ta[i]; // AC/DC tbl.sel.
- }
- sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00; // scan start
- sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3F;
- sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 4] = 00;
- return zr36050_pushit(ptr, ZR050_SOS1_IDX,
- 4 + 1 + (2 * NO_OF_COMPONENTS) + 3,
- sos_data);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* DRI (define restart interval) */
-
-static int
-zr36050_set_dri (struct zr36050 *ptr)
-{
- char dri_data[6]; // max. size of register set
-
- dprintk(3, "%s: write DRI\n", ptr->name);
- dri_data[0] = 0xff;
- dri_data[1] = 0xdd;
- dri_data[2] = 0x00;
- dri_data[3] = 0x04;
- dri_data[4] = ptr->dri >> 8;
- dri_data[5] = ptr->dri & 0xff;
- return zr36050_pushit(ptr, ZR050_DRI_IDX, 6, dri_data);
-}
-
-/* =========================================================================
- Setup function:
-
- Setup compression/decompression of Zoran's JPEG processor
- ( see also zoran 36050 manual )
-
- ... sorry for the spaghetti code ...
- ========================================================================= */
-static void
-zr36050_init (struct zr36050 *ptr)
-{
- int sum = 0;
- long bitcnt, tmp;
-
- if (ptr->mode == CODEC_DO_COMPRESSION) {
- dprintk(2, "%s: COMPRESSION SETUP\n", ptr->name);
-
- /* 050 communicates with 057 in master mode */
- zr36050_write(ptr, ZR050_HARDWARE, ZR050_HW_MSTR);
-
- /* encoding table preload for compression */
- zr36050_write(ptr, ZR050_MODE,
- ZR050_MO_COMP | ZR050_MO_TLM);
- zr36050_write(ptr, ZR050_OPTIONS, 0);
-
- /* disable all IRQs */
- zr36050_write(ptr, ZR050_INT_REQ_0, 0);
- zr36050_write(ptr, ZR050_INT_REQ_1, 3); // low 2 bits always 1
-
- /* volume control settings */
- /*zr36050_write(ptr, ZR050_MBCV, ptr->max_block_vol);*/
- zr36050_write(ptr, ZR050_SF_HI, ptr->scalefact >> 8);
- zr36050_write(ptr, ZR050_SF_LO, ptr->scalefact & 0xff);
-
- zr36050_write(ptr, ZR050_AF_HI, 0xff);
- zr36050_write(ptr, ZR050_AF_M, 0xff);
- zr36050_write(ptr, ZR050_AF_LO, 0xff);
-
- /* setup the variable jpeg tables */
- sum += zr36050_set_sof(ptr);
- sum += zr36050_set_sos(ptr);
- sum += zr36050_set_dri(ptr);
-
- /* setup the fixed jpeg tables - maybe variable, though -
- * (see table init section above) */
- dprintk(3, "%s: write DQT, DHT, APP\n", ptr->name);
- sum += zr36050_pushit(ptr, ZR050_DQT_IDX,
- sizeof(zr36050_dqt), zr36050_dqt);
- sum += zr36050_pushit(ptr, ZR050_DHT_IDX,
- sizeof(zr36050_dht), zr36050_dht);
- zr36050_write(ptr, ZR050_APP_IDX, 0xff);
- zr36050_write(ptr, ZR050_APP_IDX + 1, 0xe0 + ptr->app.appn);
- zr36050_write(ptr, ZR050_APP_IDX + 2, 0x00);
- zr36050_write(ptr, ZR050_APP_IDX + 3, ptr->app.len + 2);
- sum += zr36050_pushit(ptr, ZR050_APP_IDX + 4, 60,
- ptr->app.data) + 4;
- zr36050_write(ptr, ZR050_COM_IDX, 0xff);
- zr36050_write(ptr, ZR050_COM_IDX + 1, 0xfe);
- zr36050_write(ptr, ZR050_COM_IDX + 2, 0x00);
- zr36050_write(ptr, ZR050_COM_IDX + 3, ptr->com.len + 2);
- sum += zr36050_pushit(ptr, ZR050_COM_IDX + 4, 60,
- ptr->com.data) + 4;
-
- /* do the internal huffman table preload */
- zr36050_write(ptr, ZR050_MARKERS_EN, ZR050_ME_DHTI);
-
- zr36050_write(ptr, ZR050_GO, 1); // launch codec
- zr36050_wait_end(ptr);
- dprintk(2, "%s: Status after table preload: 0x%02x\n",
- ptr->name, ptr->status1);
-
- if ((ptr->status1 & 0x4) == 0) {
- dprintk(1, KERN_ERR "%s: init aborted!\n",
- ptr->name);
- return; // something is wrong, its timed out!!!!
- }
-
- /* setup misc. data for compression (target code sizes) */
-
- /* size of compressed code to reach without header data */
- sum = ptr->real_code_vol - sum;
- bitcnt = sum << 3; /* need the size in bits */
-
- tmp = bitcnt >> 16;
- dprintk(3,
- "%s: code: csize=%d, tot=%d, bit=%ld, highbits=%ld\n",
- ptr->name, sum, ptr->real_code_vol, bitcnt, tmp);
- zr36050_write(ptr, ZR050_TCV_NET_HI, tmp >> 8);
- zr36050_write(ptr, ZR050_TCV_NET_MH, tmp & 0xff);
- tmp = bitcnt & 0xffff;
- zr36050_write(ptr, ZR050_TCV_NET_ML, tmp >> 8);
- zr36050_write(ptr, ZR050_TCV_NET_LO, tmp & 0xff);
-
- bitcnt -= bitcnt >> 7; // bits without stuffing
- bitcnt -= ((bitcnt * 5) >> 6); // bits without eob
-
- tmp = bitcnt >> 16;
- dprintk(3, "%s: code: nettobit=%ld, highnettobits=%ld\n",
- ptr->name, bitcnt, tmp);
- zr36050_write(ptr, ZR050_TCV_DATA_HI, tmp >> 8);
- zr36050_write(ptr, ZR050_TCV_DATA_MH, tmp & 0xff);
- tmp = bitcnt & 0xffff;
- zr36050_write(ptr, ZR050_TCV_DATA_ML, tmp >> 8);
- zr36050_write(ptr, ZR050_TCV_DATA_LO, tmp & 0xff);
-
- /* compression setup with or without bitrate control */
- zr36050_write(ptr, ZR050_MODE,
- ZR050_MO_COMP | ZR050_MO_PASS2 |
- (ptr->bitrate_ctrl ? ZR050_MO_BRC : 0));
-
- /* this headers seem to deliver "valid AVI" jpeg frames */
- zr36050_write(ptr, ZR050_MARKERS_EN,
- ZR050_ME_DQT | ZR050_ME_DHT |
- ((ptr->app.len > 0) ? ZR050_ME_APP : 0) |
- ((ptr->com.len > 0) ? ZR050_ME_COM : 0));
- } else {
- dprintk(2, "%s: EXPANSION SETUP\n", ptr->name);
-
- /* 050 communicates with 055 in master mode */
- zr36050_write(ptr, ZR050_HARDWARE,
- ZR050_HW_MSTR | ZR050_HW_CFIS_2_CLK);
-
- /* encoding table preload */
- zr36050_write(ptr, ZR050_MODE, ZR050_MO_TLM);
-
- /* disable all IRQs */
- zr36050_write(ptr, ZR050_INT_REQ_0, 0);
- zr36050_write(ptr, ZR050_INT_REQ_1, 3); // low 2 bits always 1
-
- dprintk(3, "%s: write DHT\n", ptr->name);
- zr36050_pushit(ptr, ZR050_DHT_IDX, sizeof(zr36050_dht),
- zr36050_dht);
-
- /* do the internal huffman table preload */
- zr36050_write(ptr, ZR050_MARKERS_EN, ZR050_ME_DHTI);
-
- zr36050_write(ptr, ZR050_GO, 1); // launch codec
- zr36050_wait_end(ptr);
- dprintk(2, "%s: Status after table preload: 0x%02x\n",
- ptr->name, ptr->status1);
-
- if ((ptr->status1 & 0x4) == 0) {
- dprintk(1, KERN_ERR "%s: init aborted!\n",
- ptr->name);
- return; // something is wrong, its timed out!!!!
- }
-
- /* setup misc. data for expansion */
- zr36050_write(ptr, ZR050_MODE, 0);
- zr36050_write(ptr, ZR050_MARKERS_EN, 0);
- }
-
- /* adr on selected, to allow GO from master */
- zr36050_read(ptr, 0);
-}
-
-/* =========================================================================
- CODEC API FUNCTIONS
-
- this functions are accessed by the master via the API structure
- ========================================================================= */
-
-/* set compression/expansion mode and launches codec -
- this should be the last call from the master before starting processing */
-static int
-zr36050_set_mode (struct videocodec *codec,
- int mode)
-{
- struct zr36050 *ptr = (struct zr36050 *) codec->data;
-
- dprintk(2, "%s: set_mode %d call\n", ptr->name, mode);
-
- if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION))
- return -EINVAL;
-
- ptr->mode = mode;
- zr36050_init(ptr);
-
- return 0;
-}
-
-/* set picture size (norm is ignored as the codec doesn't know about it) */
-static int
-zr36050_set_video (struct videocodec *codec,
- struct tvnorm *norm,
- struct vfe_settings *cap,
- struct vfe_polarity *pol)
-{
- struct zr36050 *ptr = (struct zr36050 *) codec->data;
- int size;
-
- dprintk(2, "%s: set_video %d.%d, %d/%d-%dx%d (0x%x) q%d call\n",
- ptr->name, norm->HStart, norm->VStart,
- cap->x, cap->y, cap->width, cap->height,
- cap->decimation, cap->quality);
- /* if () return -EINVAL;
- * trust the master driver that it knows what it does - so
- * we allow invalid startx/y and norm for now ... */
- ptr->width = cap->width / (cap->decimation & 0xff);
- ptr->height = cap->height / ((cap->decimation >> 8) & 0xff);
-
- /* (KM) JPEG quality */
- size = ptr->width * ptr->height;
- size *= 16; /* size in bits */
- /* apply quality setting */
- size = size * cap->quality / 200;
-
- /* Minimum: 1kb */
- if (size < 8192)
- size = 8192;
- /* Maximum: 7/8 of code buffer */
- if (size > ptr->total_code_vol * 7)
- size = ptr->total_code_vol * 7;
-
- ptr->real_code_vol = size >> 3; /* in bytes */
-
- /* Set max_block_vol here (previously in zr36050_init, moved
- * here for consistency with zr36060 code */
- zr36050_write(ptr, ZR050_MBCV, ptr->max_block_vol);
-
- return 0;
-}
-
-/* additional control functions */
-static int
-zr36050_control (struct videocodec *codec,
- int type,
- int size,
- void *data)
-{
- struct zr36050 *ptr = (struct zr36050 *) codec->data;
- int *ival = (int *) data;
-
- dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type,
- size);
-
- switch (type) {
- case CODEC_G_STATUS: /* get last status */
- if (size != sizeof(int))
- return -EFAULT;
- zr36050_read_status1(ptr);
- *ival = ptr->status1;
- break;
-
- case CODEC_G_CODEC_MODE:
- if (size != sizeof(int))
- return -EFAULT;
- *ival = CODEC_MODE_BJPG;
- break;
-
- case CODEC_S_CODEC_MODE:
- if (size != sizeof(int))
- return -EFAULT;
- if (*ival != CODEC_MODE_BJPG)
- return -EINVAL;
- /* not needed, do nothing */
- return 0;
-
- case CODEC_G_VFE:
- case CODEC_S_VFE:
- /* not needed, do nothing */
- return 0;
-
- case CODEC_S_MMAP:
- /* not available, give an error */
- return -ENXIO;
-
- case CODEC_G_JPEG_TDS_BYTE: /* get target volume in byte */
- if (size != sizeof(int))
- return -EFAULT;
- *ival = ptr->total_code_vol;
- break;
-
- case CODEC_S_JPEG_TDS_BYTE: /* get target volume in byte */
- if (size != sizeof(int))
- return -EFAULT;
- ptr->total_code_vol = *ival;
- /* (Kieran Morrissey)
- * code copied from zr36060.c to ensure proper bitrate */
- ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3;
- break;
-
- case CODEC_G_JPEG_SCALE: /* get scaling factor */
- if (size != sizeof(int))
- return -EFAULT;
- *ival = zr36050_read_scalefactor(ptr);
- break;
-
- case CODEC_S_JPEG_SCALE: /* set scaling factor */
- if (size != sizeof(int))
- return -EFAULT;
- ptr->scalefact = *ival;
- break;
-
- case CODEC_G_JPEG_APP_DATA: { /* get appn marker data */
- struct jpeg_app_marker *app = data;
-
- if (size != sizeof(struct jpeg_app_marker))
- return -EFAULT;
-
- *app = ptr->app;
- break;
- }
-
- case CODEC_S_JPEG_APP_DATA: { /* set appn marker data */
- struct jpeg_app_marker *app = data;
-
- if (size != sizeof(struct jpeg_app_marker))
- return -EFAULT;
-
- ptr->app = *app;
- break;
- }
-
- case CODEC_G_JPEG_COM_DATA: { /* get comment marker data */
- struct jpeg_com_marker *com = data;
-
- if (size != sizeof(struct jpeg_com_marker))
- return -EFAULT;
-
- *com = ptr->com;
- break;
- }
-
- case CODEC_S_JPEG_COM_DATA: { /* set comment marker data */
- struct jpeg_com_marker *com = data;
-
- if (size != sizeof(struct jpeg_com_marker))
- return -EFAULT;
-
- ptr->com = *com;
- break;
- }
-
- default:
- return -EINVAL;
- }
-
- return size;
-}
-
-/* =========================================================================
- Exit and unregister function:
-
- Deinitializes Zoran's JPEG processor
- ========================================================================= */
-
-static int
-zr36050_unset (struct videocodec *codec)
-{
- struct zr36050 *ptr = codec->data;
-
- if (ptr) {
- /* do wee need some codec deinit here, too ???? */
-
- dprintk(1, "%s: finished codec #%d\n", ptr->name,
- ptr->num);
- kfree(ptr);
- codec->data = NULL;
-
- zr36050_codecs--;
- return 0;
- }
-
- return -EFAULT;
-}
-
-/* =========================================================================
- Setup and registry function:
-
- Initializes Zoran's JPEG processor
-
- Also sets pixel size, average code size, mode (compr./decompr.)
- (the given size is determined by the processor with the video interface)
- ========================================================================= */
-
-static int
-zr36050_setup (struct videocodec *codec)
-{
- struct zr36050 *ptr;
- int res;
-
- dprintk(2, "zr36050: initializing MJPEG subsystem #%d.\n",
- zr36050_codecs);
-
- if (zr36050_codecs == MAX_CODECS) {
- dprintk(1,
- KERN_ERR "zr36050: Can't attach more codecs!\n");
- return -ENOSPC;
- }
- //mem structure init
- codec->data = ptr = kzalloc(sizeof(struct zr36050), GFP_KERNEL);
- if (NULL == ptr) {
- dprintk(1, KERN_ERR "zr36050: Can't get enough memory!\n");
- return -ENOMEM;
- }
-
- snprintf(ptr->name, sizeof(ptr->name), "zr36050[%d]",
- zr36050_codecs);
- ptr->num = zr36050_codecs++;
- ptr->codec = codec;
-
- //testing
- res = zr36050_basic_test(ptr);
- if (res < 0) {
- zr36050_unset(codec);
- return res;
- }
- //final setup
- memcpy(ptr->h_samp_ratio, zr36050_decimation_h, 8);
- memcpy(ptr->v_samp_ratio, zr36050_decimation_v, 8);
-
- ptr->bitrate_ctrl = 0; /* 0 or 1 - fixed file size flag
- * (what is the difference?) */
- ptr->mode = CODEC_DO_COMPRESSION;
- ptr->width = 384;
- ptr->height = 288;
- ptr->total_code_vol = 16000;
- ptr->max_block_vol = 240;
- ptr->scalefact = 0x100;
- ptr->dri = 1;
-
- /* no app/com marker by default */
- ptr->app.appn = 0;
- ptr->app.len = 0;
- ptr->com.len = 0;
-
- zr36050_init(ptr);
-
- dprintk(1, KERN_INFO "%s: codec attached and running\n",
- ptr->name);
-
- return 0;
-}
-
-static const struct videocodec zr36050_codec = {
- .owner = THIS_MODULE,
- .name = "zr36050",
- .magic = 0L, // magic not used
- .flags =
- CODEC_FLAG_JPEG | CODEC_FLAG_HARDWARE | CODEC_FLAG_ENCODER |
- CODEC_FLAG_DECODER,
- .type = CODEC_TYPE_ZR36050,
- .setup = zr36050_setup, // functionality
- .unset = zr36050_unset,
- .set_mode = zr36050_set_mode,
- .set_video = zr36050_set_video,
- .control = zr36050_control,
- // others are not used
-};
-
-/* =========================================================================
- HOOK IN DRIVER AS KERNEL MODULE
- ========================================================================= */
-
-static int __init
-zr36050_init_module (void)
-{
- //dprintk(1, "ZR36050 driver %s\n",ZR050_VERSION);
- zr36050_codecs = 0;
- return videocodec_register(&zr36050_codec);
-}
-
-static void __exit
-zr36050_cleanup_module (void)
-{
- if (zr36050_codecs) {
- dprintk(1,
- "zr36050: something's wrong - %d codecs left somehow.\n",
- zr36050_codecs);
- }
- videocodec_unregister(&zr36050_codec);
-}
-
-module_init(zr36050_init_module);
-module_exit(zr36050_cleanup_module);
-
-MODULE_AUTHOR("Wolfgang Scherr <scherr@net4you.at>");
-MODULE_DESCRIPTION("Driver module for ZR36050 jpeg processors "
- ZR050_VERSION);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Zoran ZR36050 basic configuration functions - header file
- *
- * Copyright (C) 2001 Wolfgang Scherr <scherr@net4you.at>
- *
- * $Id: zr36050.h,v 1.1.2.2 2003/01/14 21:18:22 rbultje Exp $
- *
- * ------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * ------------------------------------------------------------------------
- */
-
-#ifndef ZR36050_H
-#define ZR36050_H
-
-#include "videocodec.h"
-
-/* data stored for each zoran jpeg codec chip */
-struct zr36050 {
- char name[32];
- int num;
- /* io datastructure */
- struct videocodec *codec;
- // last coder status
- __u8 status1;
- // actual coder setup
- int mode;
-
- __u16 width;
- __u16 height;
-
- __u16 bitrate_ctrl;
-
- __u32 total_code_vol;
- __u32 real_code_vol;
- __u16 max_block_vol;
-
- __u8 h_samp_ratio[8];
- __u8 v_samp_ratio[8];
- __u16 scalefact;
- __u16 dri;
-
- /* com/app marker */
- struct jpeg_com_marker com;
- struct jpeg_app_marker app;
-};
-
-/* zr36050 register addresses */
-#define ZR050_GO 0x000
-#define ZR050_HARDWARE 0x002
-#define ZR050_MODE 0x003
-#define ZR050_OPTIONS 0x004
-#define ZR050_MBCV 0x005
-#define ZR050_MARKERS_EN 0x006
-#define ZR050_INT_REQ_0 0x007
-#define ZR050_INT_REQ_1 0x008
-#define ZR050_TCV_NET_HI 0x009
-#define ZR050_TCV_NET_MH 0x00a
-#define ZR050_TCV_NET_ML 0x00b
-#define ZR050_TCV_NET_LO 0x00c
-#define ZR050_TCV_DATA_HI 0x00d
-#define ZR050_TCV_DATA_MH 0x00e
-#define ZR050_TCV_DATA_ML 0x00f
-#define ZR050_TCV_DATA_LO 0x010
-#define ZR050_SF_HI 0x011
-#define ZR050_SF_LO 0x012
-#define ZR050_AF_HI 0x013
-#define ZR050_AF_M 0x014
-#define ZR050_AF_LO 0x015
-#define ZR050_ACV_HI 0x016
-#define ZR050_ACV_MH 0x017
-#define ZR050_ACV_ML 0x018
-#define ZR050_ACV_LO 0x019
-#define ZR050_ACT_HI 0x01a
-#define ZR050_ACT_MH 0x01b
-#define ZR050_ACT_ML 0x01c
-#define ZR050_ACT_LO 0x01d
-#define ZR050_ACV_TRUN_HI 0x01e
-#define ZR050_ACV_TRUN_MH 0x01f
-#define ZR050_ACV_TRUN_ML 0x020
-#define ZR050_ACV_TRUN_LO 0x021
-#define ZR050_STATUS_0 0x02e
-#define ZR050_STATUS_1 0x02f
-
-#define ZR050_SOF_IDX 0x040
-#define ZR050_SOS1_IDX 0x07a
-#define ZR050_SOS2_IDX 0x08a
-#define ZR050_SOS3_IDX 0x09a
-#define ZR050_SOS4_IDX 0x0aa
-#define ZR050_DRI_IDX 0x0c0
-#define ZR050_DNL_IDX 0x0c6
-#define ZR050_DQT_IDX 0x0cc
-#define ZR050_DHT_IDX 0x1d4
-#define ZR050_APP_IDX 0x380
-#define ZR050_COM_IDX 0x3c0
-
-/* zr36050 hardware register bits */
-
-#define ZR050_HW_BSWD 0x80
-#define ZR050_HW_MSTR 0x40
-#define ZR050_HW_DMA 0x20
-#define ZR050_HW_CFIS_1_CLK 0x00
-#define ZR050_HW_CFIS_2_CLK 0x04
-#define ZR050_HW_CFIS_3_CLK 0x08
-#define ZR050_HW_CFIS_4_CLK 0x0C
-#define ZR050_HW_CFIS_5_CLK 0x10
-#define ZR050_HW_CFIS_6_CLK 0x14
-#define ZR050_HW_CFIS_7_CLK 0x18
-#define ZR050_HW_CFIS_8_CLK 0x1C
-#define ZR050_HW_BELE 0x01
-
-/* zr36050 mode register bits */
-
-#define ZR050_MO_COMP 0x80
-#define ZR050_MO_ATP 0x40
-#define ZR050_MO_PASS2 0x20
-#define ZR050_MO_TLM 0x10
-#define ZR050_MO_DCONLY 0x08
-#define ZR050_MO_BRC 0x04
-
-#define ZR050_MO_ATP 0x40
-#define ZR050_MO_PASS2 0x20
-#define ZR050_MO_TLM 0x10
-#define ZR050_MO_DCONLY 0x08
-
-/* zr36050 option register bits */
-
-#define ZR050_OP_NSCN_1 0x00
-#define ZR050_OP_NSCN_2 0x20
-#define ZR050_OP_NSCN_3 0x40
-#define ZR050_OP_NSCN_4 0x60
-#define ZR050_OP_NSCN_5 0x80
-#define ZR050_OP_NSCN_6 0xA0
-#define ZR050_OP_NSCN_7 0xC0
-#define ZR050_OP_NSCN_8 0xE0
-#define ZR050_OP_OVF 0x10
-
-
-/* zr36050 markers-enable register bits */
-
-#define ZR050_ME_APP 0x80
-#define ZR050_ME_COM 0x40
-#define ZR050_ME_DRI 0x20
-#define ZR050_ME_DQT 0x10
-#define ZR050_ME_DHT 0x08
-#define ZR050_ME_DNL 0x04
-#define ZR050_ME_DQTI 0x02
-#define ZR050_ME_DHTI 0x01
-
-/* zr36050 status0/1 register bit masks */
-
-#define ZR050_ST_RST_MASK 0x20
-#define ZR050_ST_SOF_MASK 0x02
-#define ZR050_ST_SOS_MASK 0x02
-#define ZR050_ST_DATRDY_MASK 0x80
-#define ZR050_ST_MRKDET_MASK 0x40
-#define ZR050_ST_RFM_MASK 0x10
-#define ZR050_ST_RFD_MASK 0x08
-#define ZR050_ST_END_MASK 0x04
-#define ZR050_ST_TCVOVF_MASK 0x02
-#define ZR050_ST_DATOVF_MASK 0x01
-
-/* pixel component idx */
-
-#define ZR050_Y_COMPONENT 0
-#define ZR050_U_COMPONENT 1
-#define ZR050_V_COMPONENT 2
-
-#endif /*fndef ZR36050_H */
+++ /dev/null
-/*
- * zr36057.h - zr36057 register offsets
- *
- * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _ZR36057_H_
-#define _ZR36057_H_
-
-
-/* Zoran ZR36057 registers */
-
-#define ZR36057_VFEHCR 0x000 /* Video Front End, Horizontal Configuration Register */
-#define ZR36057_VFEHCR_HSPol (1<<30)
-#define ZR36057_VFEHCR_HStart 10
-#define ZR36057_VFEHCR_HEnd 0
-#define ZR36057_VFEHCR_Hmask 0x3ff
-
-#define ZR36057_VFEVCR 0x004 /* Video Front End, Vertical Configuration Register */
-#define ZR36057_VFEVCR_VSPol (1<<30)
-#define ZR36057_VFEVCR_VStart 10
-#define ZR36057_VFEVCR_VEnd 0
-#define ZR36057_VFEVCR_Vmask 0x3ff
-
-#define ZR36057_VFESPFR 0x008 /* Video Front End, Scaler and Pixel Format Register */
-#define ZR36057_VFESPFR_ExtFl (1<<26)
-#define ZR36057_VFESPFR_TopField (1<<25)
-#define ZR36057_VFESPFR_VCLKPol (1<<24)
-#define ZR36057_VFESPFR_HFilter 21
-#define ZR36057_VFESPFR_HorDcm 14
-#define ZR36057_VFESPFR_VerDcm 8
-#define ZR36057_VFESPFR_DispMode 6
-#define ZR36057_VFESPFR_YUV422 (0<<3)
-#define ZR36057_VFESPFR_RGB888 (1<<3)
-#define ZR36057_VFESPFR_RGB565 (2<<3)
-#define ZR36057_VFESPFR_RGB555 (3<<3)
-#define ZR36057_VFESPFR_ErrDif (1<<2)
-#define ZR36057_VFESPFR_Pack24 (1<<1)
-#define ZR36057_VFESPFR_LittleEndian (1<<0)
-
-#define ZR36057_VDTR 0x00c /* Video Display "Top" Register */
-
-#define ZR36057_VDBR 0x010 /* Video Display "Bottom" Register */
-
-#define ZR36057_VSSFGR 0x014 /* Video Stride, Status, and Frame Grab Register */
-#define ZR36057_VSSFGR_DispStride 16
-#define ZR36057_VSSFGR_VidOvf (1<<8)
-#define ZR36057_VSSFGR_SnapShot (1<<1)
-#define ZR36057_VSSFGR_FrameGrab (1<<0)
-
-#define ZR36057_VDCR 0x018 /* Video Display Configuration Register */
-#define ZR36057_VDCR_VidEn (1<<31)
-#define ZR36057_VDCR_MinPix 24
-#define ZR36057_VDCR_Triton (1<<24)
-#define ZR36057_VDCR_VidWinHt 12
-#define ZR36057_VDCR_VidWinWid 0
-
-#define ZR36057_MMTR 0x01c /* Masking Map "Top" Register */
-
-#define ZR36057_MMBR 0x020 /* Masking Map "Bottom" Register */
-
-#define ZR36057_OCR 0x024 /* Overlay Control Register */
-#define ZR36057_OCR_OvlEnable (1 << 15)
-#define ZR36057_OCR_MaskStride 0
-
-#define ZR36057_SPGPPCR 0x028 /* System, PCI, and General Purpose Pins Control Register */
-#define ZR36057_SPGPPCR_SoftReset (1<<24)
-
-#define ZR36057_GPPGCR1 0x02c /* General Purpose Pins and GuestBus Control Register (1) */
-
-#define ZR36057_MCSAR 0x030 /* MPEG Code Source Address Register */
-
-#define ZR36057_MCTCR 0x034 /* MPEG Code Transfer Control Register */
-#define ZR36057_MCTCR_CodTime (1 << 30)
-#define ZR36057_MCTCR_CEmpty (1 << 29)
-#define ZR36057_MCTCR_CFlush (1 << 28)
-#define ZR36057_MCTCR_CodGuestID 20
-#define ZR36057_MCTCR_CodGuestReg 16
-
-#define ZR36057_MCMPR 0x038 /* MPEG Code Memory Pointer Register */
-
-#define ZR36057_ISR 0x03c /* Interrupt Status Register */
-#define ZR36057_ISR_GIRQ1 (1<<30)
-#define ZR36057_ISR_GIRQ0 (1<<29)
-#define ZR36057_ISR_CodRepIRQ (1<<28)
-#define ZR36057_ISR_JPEGRepIRQ (1<<27)
-
-#define ZR36057_ICR 0x040 /* Interrupt Control Register */
-#define ZR36057_ICR_GIRQ1 (1<<30)
-#define ZR36057_ICR_GIRQ0 (1<<29)
-#define ZR36057_ICR_CodRepIRQ (1<<28)
-#define ZR36057_ICR_JPEGRepIRQ (1<<27)
-#define ZR36057_ICR_IntPinEn (1<<24)
-
-#define ZR36057_I2CBR 0x044 /* I2C Bus Register */
-#define ZR36057_I2CBR_SDA (1<<1)
-#define ZR36057_I2CBR_SCL (1<<0)
-
-#define ZR36057_JMC 0x100 /* JPEG Mode and Control */
-#define ZR36057_JMC_JPG (1 << 31)
-#define ZR36057_JMC_JPGExpMode (0 << 29)
-#define ZR36057_JMC_JPGCmpMode (1 << 29)
-#define ZR36057_JMC_MJPGExpMode (2 << 29)
-#define ZR36057_JMC_MJPGCmpMode (3 << 29)
-#define ZR36057_JMC_RTBUSY_FB (1 << 6)
-#define ZR36057_JMC_Go_en (1 << 5)
-#define ZR36057_JMC_SyncMstr (1 << 4)
-#define ZR36057_JMC_Fld_per_buff (1 << 3)
-#define ZR36057_JMC_VFIFO_FB (1 << 2)
-#define ZR36057_JMC_CFIFO_FB (1 << 1)
-#define ZR36057_JMC_Stll_LitEndian (1 << 0)
-
-#define ZR36057_JPC 0x104 /* JPEG Process Control */
-#define ZR36057_JPC_P_Reset (1 << 7)
-#define ZR36057_JPC_CodTrnsEn (1 << 5)
-#define ZR36057_JPC_Active (1 << 0)
-
-#define ZR36057_VSP 0x108 /* Vertical Sync Parameters */
-#define ZR36057_VSP_VsyncSize 16
-#define ZR36057_VSP_FrmTot 0
-
-#define ZR36057_HSP 0x10c /* Horizontal Sync Parameters */
-#define ZR36057_HSP_HsyncStart 16
-#define ZR36057_HSP_LineTot 0
-
-#define ZR36057_FHAP 0x110 /* Field Horizontal Active Portion */
-#define ZR36057_FHAP_NAX 16
-#define ZR36057_FHAP_PAX 0
-
-#define ZR36057_FVAP 0x114 /* Field Vertical Active Portion */
-#define ZR36057_FVAP_NAY 16
-#define ZR36057_FVAP_PAY 0
-
-#define ZR36057_FPP 0x118 /* Field Process Parameters */
-#define ZR36057_FPP_Odd_Even (1 << 0)
-
-#define ZR36057_JCBA 0x11c /* JPEG Code Base Address */
-
-#define ZR36057_JCFT 0x120 /* JPEG Code FIFO Threshold */
-
-#define ZR36057_JCGI 0x124 /* JPEG Codec Guest ID */
-#define ZR36057_JCGI_JPEGuestID 4
-#define ZR36057_JCGI_JPEGuestReg 0
-
-#define ZR36057_GCR2 0x12c /* GuestBus Control Register (2) */
-
-#define ZR36057_POR 0x200 /* Post Office Register */
-#define ZR36057_POR_POPen (1<<25)
-#define ZR36057_POR_POTime (1<<24)
-#define ZR36057_POR_PODir (1<<23)
-
-#define ZR36057_STR 0x300 /* "Still" Transfer Register */
-
-#endif
+++ /dev/null
-/*
- * Zoran ZR36060 basic configuration functions
- *
- * Copyright (C) 2002 Laurent Pinchart <laurent.pinchart@skynet.be>
- *
- * $Id: zr36060.c,v 1.1.2.22 2003/05/06 09:35:36 rbultje Exp $
- *
- * ------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * ------------------------------------------------------------------------
- */
-
-#define ZR060_VERSION "v0.7"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include <linux/types.h>
-#include <linux/wait.h>
-
-/* I/O commands, error codes */
-#include <asm/io.h>
-
-/* headerfile of this module */
-#include "zr36060.h"
-
-/* codec io API */
-#include "videocodec.h"
-
-/* it doesn't make sense to have more than 20 or so,
- just to prevent some unwanted loops */
-#define MAX_CODECS 20
-
-/* amount of chips attached via this driver */
-static int zr36060_codecs;
-
-static bool low_bitrate;
-module_param(low_bitrate, bool, 0);
-MODULE_PARM_DESC(low_bitrate, "Buz compatibility option, halves bitrate");
-
-/* debugging is available via module parameter */
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-4)");
-
-#define dprintk(num, format, args...) \
- do { \
- if (debug >= num) \
- printk(format, ##args); \
- } while (0)
-
-/* =========================================================================
- Local hardware I/O functions:
-
- read/write via codec layer (registers are located in the master device)
- ========================================================================= */
-
-/* read and write functions */
-static u8
-zr36060_read (struct zr36060 *ptr,
- u16 reg)
-{
- u8 value = 0;
-
- // just in case something is wrong...
- if (ptr->codec->master_data->readreg)
- value = (ptr->codec->master_data->readreg(ptr->codec,
- reg)) & 0xff;
- else
- dprintk(1,
- KERN_ERR "%s: invalid I/O setup, nothing read!\n",
- ptr->name);
-
- //dprintk(4, "%s: reading from 0x%04x: %02x\n",ptr->name,reg,value);
-
- return value;
-}
-
-static void
-zr36060_write(struct zr36060 *ptr,
- u16 reg,
- u8 value)
-{
- //dprintk(4, "%s: writing 0x%02x to 0x%04x\n",ptr->name,value,reg);
- dprintk(4, "0x%02x @0x%04x\n", value, reg);
-
- // just in case something is wrong...
- if (ptr->codec->master_data->writereg)
- ptr->codec->master_data->writereg(ptr->codec, reg, value);
- else
- dprintk(1,
- KERN_ERR
- "%s: invalid I/O setup, nothing written!\n",
- ptr->name);
-}
-
-/* =========================================================================
- Local helper function:
-
- status read
- ========================================================================= */
-
-/* status is kept in datastructure */
-static u8
-zr36060_read_status (struct zr36060 *ptr)
-{
- ptr->status = zr36060_read(ptr, ZR060_CFSR);
-
- zr36060_read(ptr, 0);
- return ptr->status;
-}
-
-/* =========================================================================
- Local helper function:
-
- scale factor read
- ========================================================================= */
-
-/* scale factor is kept in datastructure */
-static u16
-zr36060_read_scalefactor (struct zr36060 *ptr)
-{
- ptr->scalefact = (zr36060_read(ptr, ZR060_SF_HI) << 8) |
- (zr36060_read(ptr, ZR060_SF_LO) & 0xFF);
-
- /* leave 0 selected for an eventually GO from master */
- zr36060_read(ptr, 0);
- return ptr->scalefact;
-}
-
-/* =========================================================================
- Local helper function:
-
- wait if codec is ready to proceed (end of processing) or time is over
- ========================================================================= */
-
-static void
-zr36060_wait_end (struct zr36060 *ptr)
-{
- int i = 0;
-
- while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) {
- udelay(1);
- if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
- dprintk(1,
- "%s: timeout at wait_end (last status: 0x%02x)\n",
- ptr->name, ptr->status);
- break;
- }
- }
-}
-
-/* =========================================================================
- Local helper function:
-
- basic test of "connectivity", writes/reads to/from memory the SOF marker
- ========================================================================= */
-
-static int
-zr36060_basic_test (struct zr36060 *ptr)
-{
- if ((zr36060_read(ptr, ZR060_IDR_DEV) != 0x33) &&
- (zr36060_read(ptr, ZR060_IDR_REV) != 0x01)) {
- dprintk(1,
- KERN_ERR
- "%s: attach failed, can't connect to jpeg processor!\n",
- ptr->name);
- return -ENXIO;
- }
-
- zr36060_wait_end(ptr);
- if (ptr->status & ZR060_CFSR_Busy) {
- dprintk(1,
- KERN_ERR
- "%s: attach failed, jpeg processor failed (end flag)!\n",
- ptr->name);
- return -EBUSY;
- }
-
- return 0; /* looks good! */
-}
-
-/* =========================================================================
- Local helper function:
-
- simple loop for pushing the init datasets
- ========================================================================= */
-
-static int
-zr36060_pushit (struct zr36060 *ptr,
- u16 startreg,
- u16 len,
- const char *data)
-{
- int i = 0;
-
- dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", ptr->name,
- startreg, len);
- while (i < len) {
- zr36060_write(ptr, startreg++, data[i++]);
- }
-
- return i;
-}
-
-/* =========================================================================
- Basic datasets:
-
- jpeg baseline setup data (you find it on lots places in internet, or just
- extract it from any regular .jpg image...)
-
- Could be variable, but until it's not needed it they are just fixed to save
- memory. Otherwise expand zr36060 structure with arrays, push the values to
- it and initialize from there, as e.g. the linux zr36057/60 driver does it.
- ========================================================================= */
-
-static const char zr36060_dqt[0x86] = {
- 0xff, 0xdb, //Marker: DQT
- 0x00, 0x84, //Length: 2*65+2
- 0x00, //Pq,Tq first table
- 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e,
- 0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28,
- 0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25,
- 0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33,
- 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44,
- 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57,
- 0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71,
- 0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63,
- 0x01, //Pq,Tq second table
- 0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a,
- 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63
-};
-
-static const char zr36060_dht[0x1a4] = {
- 0xff, 0xc4, //Marker: DHT
- 0x01, 0xa2, //Length: 2*AC, 2*DC
- 0x00, //DC first table
- 0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01,
- 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
- 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
- 0x01, //DC second table
- 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
- 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
- 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
- 0x10, //AC first table
- 0x00, 0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03,
- 0x05, 0x05, 0x04, 0x04, 0x00, 0x00,
- 0x01, 0x7D, 0x01, 0x02, 0x03, 0x00, 0x04, 0x11,
- 0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61,
- 0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1,
- 0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24,
- 0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17,
- 0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34,
- 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44,
- 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56,
- 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66,
- 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
- 0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88,
- 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99,
- 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8,
- 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9,
- 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8,
- 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9,
- 0xDA, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
- 0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7,
- 0xF8, 0xF9, 0xFA,
- 0x11, //AC second table
- 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04,
- 0x07, 0x05, 0x04, 0x04, 0x00, 0x01,
- 0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04,
- 0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71,
- 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91,
- 0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62,
- 0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25,
- 0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, 0x28, 0x29, 0x2A,
- 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44,
- 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56,
- 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66,
- 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
- 0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
- 0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98,
- 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7,
- 0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8,
- 0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7,
- 0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8,
- 0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
- 0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8,
- 0xF9, 0xFA
-};
-
-/* jpeg baseline setup, this is just fixed in this driver (YUV pictures) */
-#define NO_OF_COMPONENTS 0x3 //Y,U,V
-#define BASELINE_PRECISION 0x8 //MCU size (?)
-static const char zr36060_tq[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's QT
-static const char zr36060_td[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's DC
-static const char zr36060_ta[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's AC
-
-/* horizontal 422 decimation setup (maybe we support 411 or so later, too) */
-static const char zr36060_decimation_h[8] = { 2, 1, 1, 0, 0, 0, 0, 0 };
-static const char zr36060_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 };
-
-/* =========================================================================
- Local helper functions:
-
- calculation and setup of parameter-dependent JPEG baseline segments
- (needed for compression only)
- ========================================================================= */
-
-/* ------------------------------------------------------------------------- */
-
-/* SOF (start of frame) segment depends on width, height and sampling ratio
- of each color component */
-
-static int
-zr36060_set_sof (struct zr36060 *ptr)
-{
- char sof_data[34]; // max. size of register set
- int i;
-
- dprintk(3, "%s: write SOF (%dx%d, %d components)\n", ptr->name,
- ptr->width, ptr->height, NO_OF_COMPONENTS);
- sof_data[0] = 0xff;
- sof_data[1] = 0xc0;
- sof_data[2] = 0x00;
- sof_data[3] = (3 * NO_OF_COMPONENTS) + 8;
- sof_data[4] = BASELINE_PRECISION; // only '8' possible with zr36060
- sof_data[5] = (ptr->height) >> 8;
- sof_data[6] = (ptr->height) & 0xff;
- sof_data[7] = (ptr->width) >> 8;
- sof_data[8] = (ptr->width) & 0xff;
- sof_data[9] = NO_OF_COMPONENTS;
- for (i = 0; i < NO_OF_COMPONENTS; i++) {
- sof_data[10 + (i * 3)] = i; // index identifier
- sof_data[11 + (i * 3)] = (ptr->h_samp_ratio[i] << 4) |
- (ptr->v_samp_ratio[i]); // sampling ratios
- sof_data[12 + (i * 3)] = zr36060_tq[i]; // Q table selection
- }
- return zr36060_pushit(ptr, ZR060_SOF_IDX,
- (3 * NO_OF_COMPONENTS) + 10, sof_data);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* SOS (start of scan) segment depends on the used scan components
- of each color component */
-
-static int
-zr36060_set_sos (struct zr36060 *ptr)
-{
- char sos_data[16]; // max. size of register set
- int i;
-
- dprintk(3, "%s: write SOS\n", ptr->name);
- sos_data[0] = 0xff;
- sos_data[1] = 0xda;
- sos_data[2] = 0x00;
- sos_data[3] = 2 + 1 + (2 * NO_OF_COMPONENTS) + 3;
- sos_data[4] = NO_OF_COMPONENTS;
- for (i = 0; i < NO_OF_COMPONENTS; i++) {
- sos_data[5 + (i * 2)] = i; // index
- sos_data[6 + (i * 2)] = (zr36060_td[i] << 4) |
- zr36060_ta[i]; // AC/DC tbl.sel.
- }
- sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00; // scan start
- sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3f;
- sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 4] = 00;
- return zr36060_pushit(ptr, ZR060_SOS_IDX,
- 4 + 1 + (2 * NO_OF_COMPONENTS) + 3,
- sos_data);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* DRI (define restart interval) */
-
-static int
-zr36060_set_dri (struct zr36060 *ptr)
-{
- char dri_data[6]; // max. size of register set
-
- dprintk(3, "%s: write DRI\n", ptr->name);
- dri_data[0] = 0xff;
- dri_data[1] = 0xdd;
- dri_data[2] = 0x00;
- dri_data[3] = 0x04;
- dri_data[4] = (ptr->dri) >> 8;
- dri_data[5] = (ptr->dri) & 0xff;
- return zr36060_pushit(ptr, ZR060_DRI_IDX, 6, dri_data);
-}
-
-/* =========================================================================
- Setup function:
-
- Setup compression/decompression of Zoran's JPEG processor
- ( see also zoran 36060 manual )
-
- ... sorry for the spaghetti code ...
- ========================================================================= */
-static void
-zr36060_init (struct zr36060 *ptr)
-{
- int sum = 0;
- long bitcnt, tmp;
-
- if (ptr->mode == CODEC_DO_COMPRESSION) {
- dprintk(2, "%s: COMPRESSION SETUP\n", ptr->name);
-
- zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst);
-
- /* 060 communicates with 067 in master mode */
- zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr);
-
- /* Compression with or without variable scale factor */
- /*FIXME: What about ptr->bitrate_ctrl? */
- zr36060_write(ptr, ZR060_CMR,
- ZR060_CMR_Comp | ZR060_CMR_Pass2 |
- ZR060_CMR_BRB);
-
- /* Must be zero */
- zr36060_write(ptr, ZR060_MBZ, 0x00);
- zr36060_write(ptr, ZR060_TCR_HI, 0x00);
- zr36060_write(ptr, ZR060_TCR_LO, 0x00);
-
- /* Disable all IRQs - no DataErr means autoreset */
- zr36060_write(ptr, ZR060_IMR, 0);
-
- /* volume control settings */
- zr36060_write(ptr, ZR060_SF_HI, ptr->scalefact >> 8);
- zr36060_write(ptr, ZR060_SF_LO, ptr->scalefact & 0xff);
-
- zr36060_write(ptr, ZR060_AF_HI, 0xff);
- zr36060_write(ptr, ZR060_AF_M, 0xff);
- zr36060_write(ptr, ZR060_AF_LO, 0xff);
-
- /* setup the variable jpeg tables */
- sum += zr36060_set_sof(ptr);
- sum += zr36060_set_sos(ptr);
- sum += zr36060_set_dri(ptr);
-
- /* setup the fixed jpeg tables - maybe variable, though -
- * (see table init section above) */
- sum +=
- zr36060_pushit(ptr, ZR060_DQT_IDX, sizeof(zr36060_dqt),
- zr36060_dqt);
- sum +=
- zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht),
- zr36060_dht);
- zr36060_write(ptr, ZR060_APP_IDX, 0xff);
- zr36060_write(ptr, ZR060_APP_IDX + 1, 0xe0 + ptr->app.appn);
- zr36060_write(ptr, ZR060_APP_IDX + 2, 0x00);
- zr36060_write(ptr, ZR060_APP_IDX + 3, ptr->app.len + 2);
- sum += zr36060_pushit(ptr, ZR060_APP_IDX + 4, 60,
- ptr->app.data) + 4;
- zr36060_write(ptr, ZR060_COM_IDX, 0xff);
- zr36060_write(ptr, ZR060_COM_IDX + 1, 0xfe);
- zr36060_write(ptr, ZR060_COM_IDX + 2, 0x00);
- zr36060_write(ptr, ZR060_COM_IDX + 3, ptr->com.len + 2);
- sum += zr36060_pushit(ptr, ZR060_COM_IDX + 4, 60,
- ptr->com.data) + 4;
-
- /* setup misc. data for compression (target code sizes) */
-
- /* size of compressed code to reach without header data */
- sum = ptr->real_code_vol - sum;
- bitcnt = sum << 3; /* need the size in bits */
-
- tmp = bitcnt >> 16;
- dprintk(3,
- "%s: code: csize=%d, tot=%d, bit=%ld, highbits=%ld\n",
- ptr->name, sum, ptr->real_code_vol, bitcnt, tmp);
- zr36060_write(ptr, ZR060_TCV_NET_HI, tmp >> 8);
- zr36060_write(ptr, ZR060_TCV_NET_MH, tmp & 0xff);
- tmp = bitcnt & 0xffff;
- zr36060_write(ptr, ZR060_TCV_NET_ML, tmp >> 8);
- zr36060_write(ptr, ZR060_TCV_NET_LO, tmp & 0xff);
-
- bitcnt -= bitcnt >> 7; // bits without stuffing
- bitcnt -= ((bitcnt * 5) >> 6); // bits without eob
-
- tmp = bitcnt >> 16;
- dprintk(3, "%s: code: nettobit=%ld, highnettobits=%ld\n",
- ptr->name, bitcnt, tmp);
- zr36060_write(ptr, ZR060_TCV_DATA_HI, tmp >> 8);
- zr36060_write(ptr, ZR060_TCV_DATA_MH, tmp & 0xff);
- tmp = bitcnt & 0xffff;
- zr36060_write(ptr, ZR060_TCV_DATA_ML, tmp >> 8);
- zr36060_write(ptr, ZR060_TCV_DATA_LO, tmp & 0xff);
-
- /* JPEG markers to be included in the compressed stream */
- zr36060_write(ptr, ZR060_MER,
- ZR060_MER_DQT | ZR060_MER_DHT |
- ((ptr->com.len > 0) ? ZR060_MER_Com : 0) |
- ((ptr->app.len > 0) ? ZR060_MER_App : 0));
-
- /* Setup the Video Frontend */
- /* Limit pixel range to 16..235 as per CCIR-601 */
- zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range);
-
- } else {
- dprintk(2, "%s: EXPANSION SETUP\n", ptr->name);
-
- zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst);
-
- /* 060 communicates with 067 in master mode */
- zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr);
-
- /* Decompression */
- zr36060_write(ptr, ZR060_CMR, 0);
-
- /* Must be zero */
- zr36060_write(ptr, ZR060_MBZ, 0x00);
- zr36060_write(ptr, ZR060_TCR_HI, 0x00);
- zr36060_write(ptr, ZR060_TCR_LO, 0x00);
-
- /* Disable all IRQs - no DataErr means autoreset */
- zr36060_write(ptr, ZR060_IMR, 0);
-
- /* setup misc. data for expansion */
- zr36060_write(ptr, ZR060_MER, 0);
-
- /* setup the fixed jpeg tables - maybe variable, though -
- * (see table init section above) */
- zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht),
- zr36060_dht);
-
- /* Setup the Video Frontend */
- //zr36060_write(ptr, ZR060_VCR, ZR060_VCR_FIExt);
- //this doesn't seem right and doesn't work...
- zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range);
- }
-
- /* Load the tables */
- zr36060_write(ptr, ZR060_LOAD,
- ZR060_LOAD_SyncRst | ZR060_LOAD_Load);
- zr36060_wait_end(ptr);
- dprintk(2, "%s: Status after table preload: 0x%02x\n", ptr->name,
- ptr->status);
-
- if (ptr->status & ZR060_CFSR_Busy) {
- dprintk(1, KERN_ERR "%s: init aborted!\n", ptr->name);
- return; // something is wrong, its timed out!!!!
- }
-}
-
-/* =========================================================================
- CODEC API FUNCTIONS
-
- this functions are accessed by the master via the API structure
- ========================================================================= */
-
-/* set compression/expansion mode and launches codec -
- this should be the last call from the master before starting processing */
-static int
-zr36060_set_mode (struct videocodec *codec,
- int mode)
-{
- struct zr36060 *ptr = (struct zr36060 *) codec->data;
-
- dprintk(2, "%s: set_mode %d call\n", ptr->name, mode);
-
- if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION))
- return -EINVAL;
-
- ptr->mode = mode;
- zr36060_init(ptr);
-
- return 0;
-}
-
-/* set picture size (norm is ignored as the codec doesn't know about it) */
-static int
-zr36060_set_video (struct videocodec *codec,
- struct tvnorm *norm,
- struct vfe_settings *cap,
- struct vfe_polarity *pol)
-{
- struct zr36060 *ptr = (struct zr36060 *) codec->data;
- u32 reg;
- int size;
-
- dprintk(2, "%s: set_video %d/%d-%dx%d (%%%d) call\n", ptr->name,
- cap->x, cap->y, cap->width, cap->height, cap->decimation);
-
- /* if () return -EINVAL;
- * trust the master driver that it knows what it does - so
- * we allow invalid startx/y and norm for now ... */
- ptr->width = cap->width / (cap->decimation & 0xff);
- ptr->height = cap->height / (cap->decimation >> 8);
-
- zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst);
-
- /* Note that VSPol/HSPol bits in zr36060 have the opposite
- * meaning of their zr360x7 counterparts with the same names
- * N.b. for VSPol this is only true if FIVEdge = 0 (default,
- * left unchanged here - in accordance with datasheet).
- */
- reg = (!pol->vsync_pol ? ZR060_VPR_VSPol : 0)
- | (!pol->hsync_pol ? ZR060_VPR_HSPol : 0)
- | (pol->field_pol ? ZR060_VPR_FIPol : 0)
- | (pol->blank_pol ? ZR060_VPR_BLPol : 0)
- | (pol->subimg_pol ? ZR060_VPR_SImgPol : 0)
- | (pol->poe_pol ? ZR060_VPR_PoePol : 0)
- | (pol->pvalid_pol ? ZR060_VPR_PValPol : 0)
- | (pol->vclk_pol ? ZR060_VPR_VCLKPol : 0);
- zr36060_write(ptr, ZR060_VPR, reg);
-
- reg = 0;
- switch (cap->decimation & 0xff) {
- default:
- case 1:
- break;
-
- case 2:
- reg |= ZR060_SR_HScale2;
- break;
-
- case 4:
- reg |= ZR060_SR_HScale4;
- break;
- }
-
- switch (cap->decimation >> 8) {
- default:
- case 1:
- break;
-
- case 2:
- reg |= ZR060_SR_VScale;
- break;
- }
- zr36060_write(ptr, ZR060_SR, reg);
-
- zr36060_write(ptr, ZR060_BCR_Y, 0x00);
- zr36060_write(ptr, ZR060_BCR_U, 0x80);
- zr36060_write(ptr, ZR060_BCR_V, 0x80);
-
- /* sync generator */
-
- reg = norm->Ht - 1; /* Vtotal */
- zr36060_write(ptr, ZR060_SGR_VTOTAL_HI, (reg >> 8) & 0xff);
- zr36060_write(ptr, ZR060_SGR_VTOTAL_LO, (reg >> 0) & 0xff);
-
- reg = norm->Wt - 1; /* Htotal */
- zr36060_write(ptr, ZR060_SGR_HTOTAL_HI, (reg >> 8) & 0xff);
- zr36060_write(ptr, ZR060_SGR_HTOTAL_LO, (reg >> 0) & 0xff);
-
- reg = 6 - 1; /* VsyncSize */
- zr36060_write(ptr, ZR060_SGR_VSYNC, reg);
-
- //reg = 30 - 1; /* HsyncSize */
-///*CP*/ reg = (zr->params.norm == 1 ? 57 : 68);
- reg = 68;
- zr36060_write(ptr, ZR060_SGR_HSYNC, reg);
-
- reg = norm->VStart - 1; /* BVstart */
- zr36060_write(ptr, ZR060_SGR_BVSTART, reg);
-
- reg += norm->Ha / 2; /* BVend */
- zr36060_write(ptr, ZR060_SGR_BVEND_HI, (reg >> 8) & 0xff);
- zr36060_write(ptr, ZR060_SGR_BVEND_LO, (reg >> 0) & 0xff);
-
- reg = norm->HStart - 1; /* BHstart */
- zr36060_write(ptr, ZR060_SGR_BHSTART, reg);
-
- reg += norm->Wa; /* BHend */
- zr36060_write(ptr, ZR060_SGR_BHEND_HI, (reg >> 8) & 0xff);
- zr36060_write(ptr, ZR060_SGR_BHEND_LO, (reg >> 0) & 0xff);
-
- /* active area */
- reg = cap->y + norm->VStart; /* Vstart */
- zr36060_write(ptr, ZR060_AAR_VSTART_HI, (reg >> 8) & 0xff);
- zr36060_write(ptr, ZR060_AAR_VSTART_LO, (reg >> 0) & 0xff);
-
- reg += cap->height; /* Vend */
- zr36060_write(ptr, ZR060_AAR_VEND_HI, (reg >> 8) & 0xff);
- zr36060_write(ptr, ZR060_AAR_VEND_LO, (reg >> 0) & 0xff);
-
- reg = cap->x + norm->HStart; /* Hstart */
- zr36060_write(ptr, ZR060_AAR_HSTART_HI, (reg >> 8) & 0xff);
- zr36060_write(ptr, ZR060_AAR_HSTART_LO, (reg >> 0) & 0xff);
-
- reg += cap->width; /* Hend */
- zr36060_write(ptr, ZR060_AAR_HEND_HI, (reg >> 8) & 0xff);
- zr36060_write(ptr, ZR060_AAR_HEND_LO, (reg >> 0) & 0xff);
-
- /* subimage area */
- reg = norm->VStart - 4; /* SVstart */
- zr36060_write(ptr, ZR060_SWR_VSTART_HI, (reg >> 8) & 0xff);
- zr36060_write(ptr, ZR060_SWR_VSTART_LO, (reg >> 0) & 0xff);
-
- reg += norm->Ha / 2 + 8; /* SVend */
- zr36060_write(ptr, ZR060_SWR_VEND_HI, (reg >> 8) & 0xff);
- zr36060_write(ptr, ZR060_SWR_VEND_LO, (reg >> 0) & 0xff);
-
- reg = norm->HStart /*+ 64 */ - 4; /* SHstart */
- zr36060_write(ptr, ZR060_SWR_HSTART_HI, (reg >> 8) & 0xff);
- zr36060_write(ptr, ZR060_SWR_HSTART_LO, (reg >> 0) & 0xff);
-
- reg += norm->Wa + 8; /* SHend */
- zr36060_write(ptr, ZR060_SWR_HEND_HI, (reg >> 8) & 0xff);
- zr36060_write(ptr, ZR060_SWR_HEND_LO, (reg >> 0) & 0xff);
-
- size = ptr->width * ptr->height;
- /* Target compressed field size in bits: */
- size = size * 16; /* uncompressed size in bits */
- /* (Ronald) by default, quality = 100 is a compression
- * ratio 1:2. Setting low_bitrate (insmod option) sets
- * it to 1:4 (instead of 1:2, zr36060 max) as limit because the
- * buz can't handle more at decimation=1... Use low_bitrate if
- * you have a Buz, unless you know what you're doing */
- size = size * cap->quality / (low_bitrate ? 400 : 200);
- /* Lower limit (arbitrary, 1 KB) */
- if (size < 8192)
- size = 8192;
- /* Upper limit: 7/8 of the code buffers */
- if (size > ptr->total_code_vol * 7)
- size = ptr->total_code_vol * 7;
-
- ptr->real_code_vol = size >> 3; /* in bytes */
-
- /* the MBCVR is the *maximum* block volume, according to the
- * JPEG ISO specs, this shouldn't be used, since that allows
- * for the best encoding quality. So set it to it's max value */
- reg = ptr->max_block_vol;
- zr36060_write(ptr, ZR060_MBCVR, reg);
-
- return 0;
-}
-
-/* additional control functions */
-static int
-zr36060_control (struct videocodec *codec,
- int type,
- int size,
- void *data)
-{
- struct zr36060 *ptr = (struct zr36060 *) codec->data;
- int *ival = (int *) data;
-
- dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type,
- size);
-
- switch (type) {
- case CODEC_G_STATUS: /* get last status */
- if (size != sizeof(int))
- return -EFAULT;
- zr36060_read_status(ptr);
- *ival = ptr->status;
- break;
-
- case CODEC_G_CODEC_MODE:
- if (size != sizeof(int))
- return -EFAULT;
- *ival = CODEC_MODE_BJPG;
- break;
-
- case CODEC_S_CODEC_MODE:
- if (size != sizeof(int))
- return -EFAULT;
- if (*ival != CODEC_MODE_BJPG)
- return -EINVAL;
- /* not needed, do nothing */
- return 0;
-
- case CODEC_G_VFE:
- case CODEC_S_VFE:
- /* not needed, do nothing */
- return 0;
-
- case CODEC_S_MMAP:
- /* not available, give an error */
- return -ENXIO;
-
- case CODEC_G_JPEG_TDS_BYTE: /* get target volume in byte */
- if (size != sizeof(int))
- return -EFAULT;
- *ival = ptr->total_code_vol;
- break;
-
- case CODEC_S_JPEG_TDS_BYTE: /* get target volume in byte */
- if (size != sizeof(int))
- return -EFAULT;
- ptr->total_code_vol = *ival;
- ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3;
- break;
-
- case CODEC_G_JPEG_SCALE: /* get scaling factor */
- if (size != sizeof(int))
- return -EFAULT;
- *ival = zr36060_read_scalefactor(ptr);
- break;
-
- case CODEC_S_JPEG_SCALE: /* set scaling factor */
- if (size != sizeof(int))
- return -EFAULT;
- ptr->scalefact = *ival;
- break;
-
- case CODEC_G_JPEG_APP_DATA: { /* get appn marker data */
- struct jpeg_app_marker *app = data;
-
- if (size != sizeof(struct jpeg_app_marker))
- return -EFAULT;
-
- *app = ptr->app;
- break;
- }
-
- case CODEC_S_JPEG_APP_DATA: { /* set appn marker data */
- struct jpeg_app_marker *app = data;
-
- if (size != sizeof(struct jpeg_app_marker))
- return -EFAULT;
-
- ptr->app = *app;
- break;
- }
-
- case CODEC_G_JPEG_COM_DATA: { /* get comment marker data */
- struct jpeg_com_marker *com = data;
-
- if (size != sizeof(struct jpeg_com_marker))
- return -EFAULT;
-
- *com = ptr->com;
- break;
- }
-
- case CODEC_S_JPEG_COM_DATA: { /* set comment marker data */
- struct jpeg_com_marker *com = data;
-
- if (size != sizeof(struct jpeg_com_marker))
- return -EFAULT;
-
- ptr->com = *com;
- break;
- }
-
- default:
- return -EINVAL;
- }
-
- return size;
-}
-
-/* =========================================================================
- Exit and unregister function:
-
- Deinitializes Zoran's JPEG processor
- ========================================================================= */
-
-static int
-zr36060_unset (struct videocodec *codec)
-{
- struct zr36060 *ptr = codec->data;
-
- if (ptr) {
- /* do wee need some codec deinit here, too ???? */
-
- dprintk(1, "%s: finished codec #%d\n", ptr->name,
- ptr->num);
- kfree(ptr);
- codec->data = NULL;
-
- zr36060_codecs--;
- return 0;
- }
-
- return -EFAULT;
-}
-
-/* =========================================================================
- Setup and registry function:
-
- Initializes Zoran's JPEG processor
-
- Also sets pixel size, average code size, mode (compr./decompr.)
- (the given size is determined by the processor with the video interface)
- ========================================================================= */
-
-static int
-zr36060_setup (struct videocodec *codec)
-{
- struct zr36060 *ptr;
- int res;
-
- dprintk(2, "zr36060: initializing MJPEG subsystem #%d.\n",
- zr36060_codecs);
-
- if (zr36060_codecs == MAX_CODECS) {
- dprintk(1,
- KERN_ERR "zr36060: Can't attach more codecs!\n");
- return -ENOSPC;
- }
- //mem structure init
- codec->data = ptr = kzalloc(sizeof(struct zr36060), GFP_KERNEL);
- if (NULL == ptr) {
- dprintk(1, KERN_ERR "zr36060: Can't get enough memory!\n");
- return -ENOMEM;
- }
-
- snprintf(ptr->name, sizeof(ptr->name), "zr36060[%d]",
- zr36060_codecs);
- ptr->num = zr36060_codecs++;
- ptr->codec = codec;
-
- //testing
- res = zr36060_basic_test(ptr);
- if (res < 0) {
- zr36060_unset(codec);
- return res;
- }
- //final setup
- memcpy(ptr->h_samp_ratio, zr36060_decimation_h, 8);
- memcpy(ptr->v_samp_ratio, zr36060_decimation_v, 8);
-
- ptr->bitrate_ctrl = 0; /* 0 or 1 - fixed file size flag
- * (what is the difference?) */
- ptr->mode = CODEC_DO_COMPRESSION;
- ptr->width = 384;
- ptr->height = 288;
- ptr->total_code_vol = 16000; /* CHECKME */
- ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3;
- ptr->max_block_vol = 240; /* CHECKME, was 120 is 240 */
- ptr->scalefact = 0x100;
- ptr->dri = 1; /* CHECKME, was 8 is 1 */
-
- /* by default, no COM or APP markers - app should set those */
- ptr->com.len = 0;
- ptr->app.appn = 0;
- ptr->app.len = 0;
-
- zr36060_init(ptr);
-
- dprintk(1, KERN_INFO "%s: codec attached and running\n",
- ptr->name);
-
- return 0;
-}
-
-static const struct videocodec zr36060_codec = {
- .owner = THIS_MODULE,
- .name = "zr36060",
- .magic = 0L, // magic not used
- .flags =
- CODEC_FLAG_JPEG | CODEC_FLAG_HARDWARE | CODEC_FLAG_ENCODER |
- CODEC_FLAG_DECODER | CODEC_FLAG_VFE,
- .type = CODEC_TYPE_ZR36060,
- .setup = zr36060_setup, // functionality
- .unset = zr36060_unset,
- .set_mode = zr36060_set_mode,
- .set_video = zr36060_set_video,
- .control = zr36060_control,
- // others are not used
-};
-
-/* =========================================================================
- HOOK IN DRIVER AS KERNEL MODULE
- ========================================================================= */
-
-static int __init
-zr36060_init_module (void)
-{
- //dprintk(1, "zr36060 driver %s\n",ZR060_VERSION);
- zr36060_codecs = 0;
- return videocodec_register(&zr36060_codec);
-}
-
-static void __exit
-zr36060_cleanup_module (void)
-{
- if (zr36060_codecs) {
- dprintk(1,
- "zr36060: something's wrong - %d codecs left somehow.\n",
- zr36060_codecs);
- }
-
- /* however, we can't just stay alive */
- videocodec_unregister(&zr36060_codec);
-}
-
-module_init(zr36060_init_module);
-module_exit(zr36060_cleanup_module);
-
-MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@skynet.be>");
-MODULE_DESCRIPTION("Driver module for ZR36060 jpeg processors "
- ZR060_VERSION);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Zoran ZR36060 basic configuration functions - header file
- *
- * Copyright (C) 2002 Laurent Pinchart <laurent.pinchart@skynet.be>
- *
- * $Id: zr36060.h,v 1.1.1.1.2.3 2003/01/14 21:18:47 rbultje Exp $
- *
- * ------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * ------------------------------------------------------------------------
- */
-
-#ifndef ZR36060_H
-#define ZR36060_H
-
-#include "videocodec.h"
-
-/* data stored for each zoran jpeg codec chip */
-struct zr36060 {
- char name[32];
- int num;
- /* io datastructure */
- struct videocodec *codec;
- // last coder status
- __u8 status;
- // actual coder setup
- int mode;
-
- __u16 width;
- __u16 height;
-
- __u16 bitrate_ctrl;
-
- __u32 total_code_vol;
- __u32 real_code_vol;
- __u16 max_block_vol;
-
- __u8 h_samp_ratio[8];
- __u8 v_samp_ratio[8];
- __u16 scalefact;
- __u16 dri;
-
- /* app/com marker data */
- struct jpeg_app_marker app;
- struct jpeg_com_marker com;
-};
-
-/* ZR36060 register addresses */
-#define ZR060_LOAD 0x000
-#define ZR060_CFSR 0x001
-#define ZR060_CIR 0x002
-#define ZR060_CMR 0x003
-#define ZR060_MBZ 0x004
-#define ZR060_MBCVR 0x005
-#define ZR060_MER 0x006
-#define ZR060_IMR 0x007
-#define ZR060_ISR 0x008
-#define ZR060_TCV_NET_HI 0x009
-#define ZR060_TCV_NET_MH 0x00a
-#define ZR060_TCV_NET_ML 0x00b
-#define ZR060_TCV_NET_LO 0x00c
-#define ZR060_TCV_DATA_HI 0x00d
-#define ZR060_TCV_DATA_MH 0x00e
-#define ZR060_TCV_DATA_ML 0x00f
-#define ZR060_TCV_DATA_LO 0x010
-#define ZR060_SF_HI 0x011
-#define ZR060_SF_LO 0x012
-#define ZR060_AF_HI 0x013
-#define ZR060_AF_M 0x014
-#define ZR060_AF_LO 0x015
-#define ZR060_ACV_HI 0x016
-#define ZR060_ACV_MH 0x017
-#define ZR060_ACV_ML 0x018
-#define ZR060_ACV_LO 0x019
-#define ZR060_ACT_HI 0x01a
-#define ZR060_ACT_MH 0x01b
-#define ZR060_ACT_ML 0x01c
-#define ZR060_ACT_LO 0x01d
-#define ZR060_ACV_TRUN_HI 0x01e
-#define ZR060_ACV_TRUN_MH 0x01f
-#define ZR060_ACV_TRUN_ML 0x020
-#define ZR060_ACV_TRUN_LO 0x021
-#define ZR060_IDR_DEV 0x022
-#define ZR060_IDR_REV 0x023
-#define ZR060_TCR_HI 0x024
-#define ZR060_TCR_LO 0x025
-#define ZR060_VCR 0x030
-#define ZR060_VPR 0x031
-#define ZR060_SR 0x032
-#define ZR060_BCR_Y 0x033
-#define ZR060_BCR_U 0x034
-#define ZR060_BCR_V 0x035
-#define ZR060_SGR_VTOTAL_HI 0x036
-#define ZR060_SGR_VTOTAL_LO 0x037
-#define ZR060_SGR_HTOTAL_HI 0x038
-#define ZR060_SGR_HTOTAL_LO 0x039
-#define ZR060_SGR_VSYNC 0x03a
-#define ZR060_SGR_HSYNC 0x03b
-#define ZR060_SGR_BVSTART 0x03c
-#define ZR060_SGR_BHSTART 0x03d
-#define ZR060_SGR_BVEND_HI 0x03e
-#define ZR060_SGR_BVEND_LO 0x03f
-#define ZR060_SGR_BHEND_HI 0x040
-#define ZR060_SGR_BHEND_LO 0x041
-#define ZR060_AAR_VSTART_HI 0x042
-#define ZR060_AAR_VSTART_LO 0x043
-#define ZR060_AAR_VEND_HI 0x044
-#define ZR060_AAR_VEND_LO 0x045
-#define ZR060_AAR_HSTART_HI 0x046
-#define ZR060_AAR_HSTART_LO 0x047
-#define ZR060_AAR_HEND_HI 0x048
-#define ZR060_AAR_HEND_LO 0x049
-#define ZR060_SWR_VSTART_HI 0x04a
-#define ZR060_SWR_VSTART_LO 0x04b
-#define ZR060_SWR_VEND_HI 0x04c
-#define ZR060_SWR_VEND_LO 0x04d
-#define ZR060_SWR_HSTART_HI 0x04e
-#define ZR060_SWR_HSTART_LO 0x04f
-#define ZR060_SWR_HEND_HI 0x050
-#define ZR060_SWR_HEND_LO 0x051
-
-#define ZR060_SOF_IDX 0x060
-#define ZR060_SOS_IDX 0x07a
-#define ZR060_DRI_IDX 0x0c0
-#define ZR060_DQT_IDX 0x0cc
-#define ZR060_DHT_IDX 0x1d4
-#define ZR060_APP_IDX 0x380
-#define ZR060_COM_IDX 0x3c0
-
-/* ZR36060 LOAD register bits */
-
-#define ZR060_LOAD_Load (1 << 7)
-#define ZR060_LOAD_SyncRst (1 << 0)
-
-/* ZR36060 Code FIFO Status register bits */
-
-#define ZR060_CFSR_Busy (1 << 7)
-#define ZR060_CFSR_CBusy (1 << 2)
-#define ZR060_CFSR_CFIFO (3 << 0)
-
-/* ZR36060 Code Interface register */
-
-#define ZR060_CIR_Code16 (1 << 7)
-#define ZR060_CIR_Endian (1 << 6)
-#define ZR060_CIR_CFIS (1 << 2)
-#define ZR060_CIR_CodeMstr (1 << 0)
-
-/* ZR36060 Codec Mode register */
-
-#define ZR060_CMR_Comp (1 << 7)
-#define ZR060_CMR_ATP (1 << 6)
-#define ZR060_CMR_Pass2 (1 << 5)
-#define ZR060_CMR_TLM (1 << 4)
-#define ZR060_CMR_BRB (1 << 2)
-#define ZR060_CMR_FSF (1 << 1)
-
-/* ZR36060 Markers Enable register */
-
-#define ZR060_MER_App (1 << 7)
-#define ZR060_MER_Com (1 << 6)
-#define ZR060_MER_DRI (1 << 5)
-#define ZR060_MER_DQT (1 << 4)
-#define ZR060_MER_DHT (1 << 3)
-
-/* ZR36060 Interrupt Mask register */
-
-#define ZR060_IMR_EOAV (1 << 3)
-#define ZR060_IMR_EOI (1 << 2)
-#define ZR060_IMR_End (1 << 1)
-#define ZR060_IMR_DataErr (1 << 0)
-
-/* ZR36060 Interrupt Status register */
-
-#define ZR060_ISR_ProCnt (3 << 6)
-#define ZR060_ISR_EOAV (1 << 3)
-#define ZR060_ISR_EOI (1 << 2)
-#define ZR060_ISR_End (1 << 1)
-#define ZR060_ISR_DataErr (1 << 0)
-
-/* ZR36060 Video Control register */
-
-#define ZR060_VCR_Video8 (1 << 7)
-#define ZR060_VCR_Range (1 << 6)
-#define ZR060_VCR_FIDet (1 << 3)
-#define ZR060_VCR_FIVedge (1 << 2)
-#define ZR060_VCR_FIExt (1 << 1)
-#define ZR060_VCR_SyncMstr (1 << 0)
-
-/* ZR36060 Video Polarity register */
-
-#define ZR060_VPR_VCLKPol (1 << 7)
-#define ZR060_VPR_PValPol (1 << 6)
-#define ZR060_VPR_PoePol (1 << 5)
-#define ZR060_VPR_SImgPol (1 << 4)
-#define ZR060_VPR_BLPol (1 << 3)
-#define ZR060_VPR_FIPol (1 << 2)
-#define ZR060_VPR_HSPol (1 << 1)
-#define ZR060_VPR_VSPol (1 << 0)
-
-/* ZR36060 Scaling register */
-
-#define ZR060_SR_VScale (1 << 2)
-#define ZR060_SR_HScale2 (1 << 0)
-#define ZR060_SR_HScale4 (2 << 0)
-
-#endif /*fndef ZR36060_H */
OSDN Git Service
