thermal/drivers/tango: Remove tango driver

The tango platform is getting removed, so the driver is no
longer needed.

Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210120162400.4115366-2-arnd@kernel.org

diff --git a/Documentation/devicetree/bindings/thermal/tango-thermal.txt b/Documentation/devicetree/bindings/thermal/tango-thermal.txt
deleted file mode 100644 (file)
index 2c918d7..0000000
--- a/Documentation/devicetree/bindings/thermal/tango-thermal.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Tango Thermal
-
-The SMP8758 SoC includes 3 instances of this temperature sensor
-(in the CPU, video decoder, and PCIe controller).
-
-Required properties:
-- #thermal-sensor-cells: Should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml)
-- compatible: "sigma,smp8758-thermal"
-- reg: Address range of the thermal registers
-
-Example:
-
-       cpu_temp: thermal@920100 {
-               #thermal-sensor-cells = <0>;
-               compatible = "sigma,smp8758-thermal";
-               reg = <0x920100 12>;
-       };

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 7edc8dc..cf19957 100644 (file)
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -450,15 +450,6 @@ depends on (ARCH_STI || ARCH_STM32) && OF
 source "drivers/thermal/st/Kconfig"
 endmenu
 
-config TANGO_THERMAL
-       tristate "Tango thermal management"
-       depends on ARCH_TANGO || COMPILE_TEST
-       help
-         Enable the Tango thermal driver, which supports the primitive
-         temperature sensor embedded in Tango chips since the SMP8758.
-         This sensor only generates a 1-bit signal to indicate whether
-         the die temperature exceeds a programmable threshold.
-
 source "drivers/thermal/tegra/Kconfig"
 
 config GENERIC_ADC_THERMAL

diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index b64dd50..a44dda2 100644 (file)
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -42,7 +42,6 @@ obj-y                         += samsung/
 obj-$(CONFIG_DOVE_THERMAL)     += dove_thermal.o
 obj-$(CONFIG_DB8500_THERMAL)   += db8500_thermal.o
 obj-$(CONFIG_ARMADA_THERMAL)   += armada_thermal.o
-obj-$(CONFIG_TANGO_THERMAL)    += tango_thermal.o
 obj-$(CONFIG_IMX_THERMAL)      += imx_thermal.o
 obj-$(CONFIG_IMX_SC_THERMAL)   += imx_sc_thermal.o
 obj-$(CONFIG_IMX8MM_THERMAL)   += imx8mm_thermal.o

diff --git a/drivers/thermal/tango_thermal.c b/drivers/thermal/tango_thermal.c
deleted file mode 100644 (file)
index 304b461..0000000
--- a/drivers/thermal/tango_thermal.c
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/thermal.h>
-#include <linux/platform_device.h>
-
-/*
- * According to a data sheet draft, "this temperature sensor uses a bandgap
- * type of circuit to compare a voltage which has a negative temperature
- * coefficient with a voltage that is proportional to absolute temperature.
- * A resistor bank allows 41 different temperature thresholds to be selected
- * and the logic output will then indicate whether the actual die temperature
- * lies above or below the selected threshold."
- */
-
-#define TEMPSI_CMD     0
-#define TEMPSI_RES     4
-#define TEMPSI_CFG     8
-
-#define CMD_OFF                0
-#define CMD_ON         1
-#define CMD_READ       2
-
-#define IDX_MIN                15
-#define IDX_MAX                40
-
-struct tango_thermal_priv {
-       void __iomem *base;
-       int thresh_idx;
-};
-
-static bool temp_above_thresh(void __iomem *base, int thresh_idx)
-{
-       writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD);
-       usleep_range(10, 20);
-       writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD);
-
-       return readl(base + TEMPSI_RES);
-}
-
-static int tango_get_temp(void *arg, int *res)
-{
-       struct tango_thermal_priv *priv = arg;
-       int idx = priv->thresh_idx;
-
-       if (temp_above_thresh(priv->base, idx)) {
-               /* Search upward by incrementing thresh_idx */
-               while (idx < IDX_MAX && temp_above_thresh(priv->base, ++idx))
-                       cpu_relax();
-               idx = idx - 1; /* always return lower bound */
-       } else {
-               /* Search downward by decrementing thresh_idx */
-               while (idx > IDX_MIN && !temp_above_thresh(priv->base, --idx))
-                       cpu_relax();
-       }
-
-       *res = (idx * 9 / 2 - 38) * 1000; /* millidegrees Celsius */
-       priv->thresh_idx = idx;
-
-       return 0;
-}
-
-static const struct thermal_zone_of_device_ops ops = {
-       .get_temp       = tango_get_temp,
-};
-
-static void tango_thermal_init(struct tango_thermal_priv *priv)
-{
-       writel(0, priv->base + TEMPSI_CFG);
-       writel(CMD_ON, priv->base + TEMPSI_CMD);
-}
-
-static int tango_thermal_probe(struct platform_device *pdev)
-{
-       struct resource *res;
-       struct tango_thermal_priv *priv;
-       struct thermal_zone_device *tzdev;
-
-       priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-       if (!priv)
-               return -ENOMEM;
-
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       priv->base = devm_ioremap_resource(&pdev->dev, res);
-       if (IS_ERR(priv->base))
-               return PTR_ERR(priv->base);
-
-       platform_set_drvdata(pdev, priv);
-       priv->thresh_idx = IDX_MIN;
-       tango_thermal_init(priv);
-
-       tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &ops);
-       return PTR_ERR_OR_ZERO(tzdev);
-}
-
-static int __maybe_unused tango_thermal_resume(struct device *dev)
-{
-       tango_thermal_init(dev_get_drvdata(dev));
-       return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(tango_thermal_pm, NULL, tango_thermal_resume);
-
-static const struct of_device_id tango_sensor_ids[] = {
-       {
-               .compatible = "sigma,smp8758-thermal",
-       },
-       { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, tango_sensor_ids);
-
-static struct platform_driver tango_thermal_driver = {
-       .probe  = tango_thermal_probe,
-       .driver = {
-               .name           = "tango-thermal",
-               .of_match_table = tango_sensor_ids,
-               .pm             = &tango_thermal_pm,
-       },
-};
-
-module_platform_driver(tango_thermal_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Sigma Designs");
-MODULE_DESCRIPTION("Tango temperature sensor");