q800: use GLUE IRQ numbers instead of IRQ level for GLUE IRQs

In order to allow dynamic routing of IRQs to different IRQ levels on the CPU
depending upon port B bit 6, use GLUE IRQ numbers and map them to the the
corresponding CPU IRQ level accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
index 15f3067..81c335b 100644 (file)
--- a/hw/m68k/q800.c
+++ b/hw/m68k/q800.c
@@ -102,11 +102,34 @@ struct GLUEState {
     uint8_t ipr;
 };
 
+#define GLUE_IRQ_IN_VIA1       0
+#define GLUE_IRQ_IN_VIA2       1
+#define GLUE_IRQ_IN_SONIC      2
+#define GLUE_IRQ_IN_ESCC       3
+
 static void GLUE_set_irq(void *opaque, int irq, int level)
 {
     GLUEState *s = opaque;
     int i;
 
+    switch (irq) {
+    case GLUE_IRQ_IN_VIA1:
+        irq = 5;
+        break;
+
+    case GLUE_IRQ_IN_VIA2:
+        irq = 1;
+        break;
+
+    case GLUE_IRQ_IN_SONIC:
+        irq = 2;
+        break;
+
+    case GLUE_IRQ_IN_ESCC:
+        irq = 3;
+        break;
+    }
+
     if (level) {
         s->ipr |= 1 << irq;
     } else {
@@ -284,7 +307,7 @@ static void q800_init(MachineState *machine)
     sysbus = SYS_BUS_DEVICE(via1_dev);
     sysbus_realize_and_unref(sysbus, &error_fatal);
     sysbus_mmio_map(sysbus, 1, VIA_BASE);
-    sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(glue, 5));
+    sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(glue, GLUE_IRQ_IN_VIA1));
 
     adb_bus = qdev_get_child_bus(via1_dev, "adb.0");
     dev = qdev_new(TYPE_ADB_KEYBOARD);
@@ -297,7 +320,7 @@ static void q800_init(MachineState *machine)
     sysbus = SYS_BUS_DEVICE(via2_dev);
     sysbus_realize_and_unref(sysbus, &error_fatal);
     sysbus_mmio_map(sysbus, 1, VIA_BASE + VIA_SIZE);
-    sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(glue, 1));
+    sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(glue, GLUE_IRQ_IN_VIA2));
 
     /* MACSONIC */
 
@@ -330,7 +353,7 @@ static void q800_init(MachineState *machine)
     sysbus = SYS_BUS_DEVICE(dev);
     sysbus_realize_and_unref(sysbus, &error_fatal);
     sysbus_mmio_map(sysbus, 0, SONIC_BASE);
-    sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(glue, 2));
+    sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(glue, GLUE_IRQ_IN_SONIC));
 
     memory_region_init_rom(dp8393x_prom, NULL, "dp8393x-q800.prom",
                            SONIC_PROM_SIZE, &error_fatal);
@@ -366,7 +389,8 @@ static void q800_init(MachineState *machine)
     qdev_realize_and_unref(escc_orgate, NULL, &error_fatal);
     sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(escc_orgate, 0));
     sysbus_connect_irq(sysbus, 1, qdev_get_gpio_in(escc_orgate, 1));
-    qdev_connect_gpio_out(DEVICE(escc_orgate), 0, qdev_get_gpio_in(glue, 3));
+    qdev_connect_gpio_out(DEVICE(escc_orgate), 0,
+                          qdev_get_gpio_in(glue, GLUE_IRQ_IN_ESCC));
     sysbus_mmio_map(sysbus, 0, SCC_BASE);
 
     /* SCSI */