phy: qcom-qusb2: Power-on PHY before initialization

PHY must be powered on before turning ON clocks and
attempting to initialize it. Driver is exposing
separate init and power_on routines for this.
Apparently USB dwc3 core driver performs power-on
after init. Also, poweron and init for QUSB2 PHY
need to be executed together always, hence remove
poweron callback from phy_ops and explicitly perform
this from init, similar changes needed for poweroff.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 6c57524..4a5b2a1 100644 (file)
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -195,54 +195,31 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
        qusb2_setbits(qphy->base, QUSB2PHY_PORT_TUNE2, val[0] << 0x4);
 }
 
-static int qusb2_phy_poweron(struct phy *phy)
+static int qusb2_phy_init(struct phy *phy)
 {
        struct qusb2_phy *qphy = phy_get_drvdata(phy);
-       int num = ARRAY_SIZE(qphy->vregs);
+       unsigned int val;
+       unsigned int clk_scheme;
        int ret;
 
-       dev_vdbg(&phy->dev, "%s(): Powering-on QUSB2 phy\n", __func__);
+       dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__);
 
        /* turn on regulator supplies */
-       ret = regulator_bulk_enable(num, qphy->vregs);
+       ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
        if (ret)
                return ret;
 
        ret = clk_prepare_enable(qphy->iface_clk);
        if (ret) {
                dev_err(&phy->dev, "failed to enable iface_clk, %d\n", ret);
-               regulator_bulk_disable(num, qphy->vregs);
-               return ret;
+               goto poweroff_phy;
        }
 
-       return 0;
-}
-
-static int qusb2_phy_poweroff(struct phy *phy)
-{
-       struct qusb2_phy *qphy = phy_get_drvdata(phy);
-
-       clk_disable_unprepare(qphy->iface_clk);
-
-       regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
-
-       return 0;
-}
-
-static int qusb2_phy_init(struct phy *phy)
-{
-       struct qusb2_phy *qphy = phy_get_drvdata(phy);
-       unsigned int val;
-       unsigned int clk_scheme;
-       int ret;
-
-       dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__);
-
        /* enable ahb interface clock to program phy */
        ret = clk_prepare_enable(qphy->cfg_ahb_clk);
        if (ret) {
                dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
-               return ret;
+               goto disable_iface_clk;
        }
 
        /* Perform phy reset */
@@ -344,6 +321,11 @@ assert_phy_reset:
        reset_control_assert(qphy->phy_reset);
 disable_ahb_clk:
        clk_disable_unprepare(qphy->cfg_ahb_clk);
+disable_iface_clk:
+       clk_disable_unprepare(qphy->iface_clk);
+poweroff_phy:
+       regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
+
        return ret;
 }
 
@@ -361,6 +343,9 @@ static int qusb2_phy_exit(struct phy *phy)
        reset_control_assert(qphy->phy_reset);
 
        clk_disable_unprepare(qphy->cfg_ahb_clk);
+       clk_disable_unprepare(qphy->iface_clk);
+
+       regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
 
        return 0;
 }
@@ -368,8 +353,6 @@ static int qusb2_phy_exit(struct phy *phy)
 static const struct phy_ops qusb2_phy_gen_ops = {
        .init           = qusb2_phy_init,
        .exit           = qusb2_phy_exit,
-       .power_on       = qusb2_phy_poweron,
-       .power_off      = qusb2_phy_poweroff,
        .owner          = THIS_MODULE,
 };