libiberty_topdir = @libiberty_topdir@
srcdir = @srcdir@
+top_builddir = .
+
prefix = @prefix@
exec_prefix = @exec_prefix@
INSTALL_DATA = @INSTALL_DATA@
mkinstalldirs = $(SHELL) $(libiberty_topdir)/mkinstalldirs
-# Some compilers can't handle cc -c blah.c -o foo/blah.o.
-OUTPUT_OPTION = @OUTPUT_OPTION@
-
AR = @AR@
AR_FLAGS = rc
RANLIB = @RANLIB@
MAKEINFO = @MAKEINFO@
PERL = @PERL@
+LIBTOOL = @LIBTOOL@
PICFLAG =
TESTLIB = ./testlib.a
LIBOBJS = @LIBOBJS@
+LTLIBOBJS = @LTLIBOBJS@
# A configuration can specify extra .o files that should be included,
# even if they are in libc. (Perhaps the libc version is buggy.)
EXTRA_OFILES =
+EXTRA_LTOFILES =
# Flags to pass to a recursive make.
FLAGS_TO_PASS = \
"DESTDIR=$(DESTDIR)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"EXTRA_OFILES=$(EXTRA_OFILES)" \
+ "EXTRA_LTOFILES=$(EXTRA_LTOFILES)" \
"HDEFINES=$(HDEFINES)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
SUBDIRS = testsuite
# FIXME: add @BUILD_INFO@ once we're sure it works for everyone.
-all: stamp-picdir $(TARGETLIB) needed-list required-list all-subdir
+all: $(TARGETLIB) needed-list required-list all-subdir
@: $(MAKE) ; exec $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=all
.PHONY: check installcheck
INCDIR=$(srcdir)/$(MULTISRCTOP)../include
COMPILE.c = $(CC) -c @DEFS@ $(LIBCFLAGS) -I. -I$(INCDIR) $(HDEFINES) @ac_libiberty_warn_cflags@
+LTCOMPILE = $(LIBTOOL) --mode=compile $(COMPILE.c)
# Just to make sure we don't use a built-in rule with VPATH
.c.o:
false
+.c.lo:
+ false
+
# NOTE: If you add new files to the library, add them to this list
-# (alphabetical), and add them to REQUIRED_OFILES, or
-# CONFIGURED_OFILES and funcs in configure.ac. Also run "make maint-deps"
-# to build the new rules.
+# (alphabetical), and add them to REQUIRED_OFILES/REQUIRED_LTOFILES, or
+# CONFIGURED_OFILES/CONFIGURED_LTOFILES and funcs in configure.ac.
+# Also run "make maint-deps" to build the new rules.
CFILES = alloca.c argv.c asprintf.c atexit.c \
basename.c bcmp.c bcopy.c bsearch.c bzero.c \
calloc.c choose-temp.c clock.c concat.c cp-demangle.c \
./ternary.o \
./xatexit.o ./xexit.o ./xmalloc.o ./xmemdup.o ./xstrdup.o \
./xstrerror.o
+REQUIRED_LTOFILES = ./regex.lo ./cplus-dem.lo ./cp-demangle.lo ./md5.lo \
+ ./alloca.lo ./argv.lo \
+ ./choose-temp.lo ./concat.lo ./cp-demint.lo \
+ ./dyn-string.lo \
+ ./fdmatch.lo ./fibheap.lo ./floatformat.lo ./fnmatch.lo \
+ ./getopt.lo ./getopt1.lo ./getpwd.lo ./getruntime.lo \
+ ./hashtab.lo ./hex.lo \
+ ./lbasename.lo ./lrealpath.lo \
+ ./make-relative-prefix.lo ./make-temp-file.lo \
+ ./objalloc.lo ./obstack.lo \
+ ./partition.lo ./physmem.lo @ltpexecute@ \
+ ./safe-ctype.lo ./sort.lo ./spaces.lo ./splay-tree.lo ./strerror.lo \
+ ./strsignal.lo \
+ ./ternary.lo \
+ ./xatexit.lo ./xexit.lo ./xmalloc.lo ./xmemdup.lo ./xstrdup.lo \
+ ./xstrerror.lo
# These are all the objects that configure may add to the library via
# $funcs or EXTRA_OFILES. This list exists here only for "make
./vasprintf.o ./vfork.o ./vfprintf.o ./vprintf.o ./vsnprintf.o \
./vsprintf.o \
./waitpid.o
+CONFIGURED_LTOFILES = ./asprintf.lo ./atexit.lo \
+ ./basename.lo ./bcmp.lo ./bcopy.lo ./bsearch.lo ./bzero.lo \
+ ./calloc.lo ./clock.lo ./copysign.lo \
+ ./_doprnt.lo \
+ ./ffs.lo \
+ ./getcwd.lo ./getpagesize.lo \
+ ./index.lo ./insque.lo \
+ ./memchr.lo ./memcmp.lo ./memcpy.lo ./memmove.lo ./mempcpy.lo \
+ ./memset.lo ./mkstemps.lo \
+ ./pex-djgpp.lo ./pex-mpw.lo ./pex-msdos.lo ./pex-os2.lo \
+ ./pex-unix.lo ./pex-win32.lo \
+ ./putenv.lo \
+ ./random.lo ./rename.lo ./rindex.lo \
+ ./setenv.lo ./sigsetmask.lo ./snprintf.lo ./stpcpy.lo ./stpncpy.lo \
+ ./strcasecmp.lo ./strchr.lo ./strdup.lo ./strncasecmp.lo \
+ ./strncmp.lo ./strrchr.lo ./strstr.lo \
+ ./strtod.lo ./strtol.lo ./strtoul.lo \
+ ./tmpnam.lo \
+ ./vasprintf.lo ./vfork.lo ./vfprintf.lo ./vprintf.lo ./vsnprintf.lo \
+ ./vsprintf.lo \
+ ./waitpid.lo
# These files are installed if the library has been configured to do so.
INSTALLED_HEADERS = \
$(INCDIR)/splay-tree.h \
$(INCDIR)/ternary.h
-$(TARGETLIB): $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS)
- -rm -f $(TARGETLIB) pic/$(TARGETLIB)
+$(TARGETLIB): $(REQUIRED_LTOFILES) $(EXTRA_LTOFILES) $(LTLIBOBJS)
+ -rm -f $(TARGETLIB) .libs/$(TARGETLIB)
$(AR) $(AR_FLAGS) $(TARGETLIB) \
$(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS)
$(RANLIB) $(TARGETLIB)
- if [ x"$(PICFLAG)" != x ]; then \
- cd pic; \
+ if [ -d .libs ]; then \
+ cd .libs; \
$(AR) $(AR_FLAGS) $(TARGETLIB) \
$(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS); \
$(RANLIB) $(TARGETLIB); \
+ [ -d ../pic ] || mkdir ../pic; \
+ rm -f ../pic/$(TARGETLIB); \
+ cp $(TARGETLIB) ../pic/$(TARGETLIB); \
cd ..; \
else true; fi
-$(TESTLIB): $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
+$(TESTLIB): $(REQUIRED_LTOFILES) $(CONFIGURED_LTOFILES)
-rm -f $(TESTLIB)
$(AR) $(AR_FLAGS) $(TESTLIB) \
$(REQUIRED_OFILES) $(CONFIGURED_OFILES)
required-list: Makefile
echo $(REQUIRED_OFILES) > required-list
-stamp-picdir:
- if [ x"$(PICFLAG)" != x ] && [ ! -d pic ]; then \
- mkdir pic; \
- else true; fi
- touch stamp-picdir
-
.PHONY: all etags tags ls clean stage1 stage2
etags tags: TAGS etags-subdir
# Various targets for maintainers.
maint-missing :
- @$(PERL) $(srcdir)/maint-tool -s $(srcdir) missing $(CFILES) $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
+ @$(PERL) $(srcdir)/maint-tool -s $(srcdir) missing $(CFILES) $(REQUIRED_LTOFILES) $(CONFIGURED_LTOFILES)
-maint-buildall : $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
+maint-buildall : $(REQUIRED_LTOFILES) $(CONFIGURED_LTOFILES)
@true
maint-undoc : $(srcdir)/functions.texi
# Cleaning has to be done carefully to ensure that we don't clean our SUBDIRS
# multiple times, hence our explicit recursion with an empty SUBDIRS.
mostlyclean: mostlyclean-subdir
- -rm -rf *.o pic core errs \#* *.E a.out
+ -rm -rf *.o *.lo pic .libs core errs \#* *.E a.out
-rm -f needed.awk needed2.awk errors dummy needed-list config.h stamp-*
- -rm -f $(CONFIG_H) $(NEEDED_LIST) stamp-picdir
+ -rm -f $(CONFIG_H) $(NEEDED_LIST)
-rm -f libiberty.aux libiberty.cp libiberty.cps libiberty.fn libiberty.ky
-rm -f libiberty.log libiberty.tmp libiberty.tps libiberty.pg
-rm -f libiberty.pgs libiberty.toc libiberty.tp libiberty.tpl libiberty.vr
cd $$dir && $(MAKE) $(FLAGS_TO_PASS) $$target; \
done
-$(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS): stamp-picdir
-$(CONFIGURED_OFILES): stamp-picdir
-
+# Don't export variables to the environment, in order to not confuse
+# configure.
+.NOEXPORT:
# The dependencies in the remainder of this file are automatically
# generated by "make maint-deps". Manual edits will be lost.
-./_doprnt.o: $(srcdir)/_doprnt.c config.h $(INCDIR)/ansidecl.h \
+./_doprnt.lo: $(srcdir)/_doprnt.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/safe-ctype.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/_doprnt.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/_doprnt.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/_doprnt.c
-./alloca.o: $(srcdir)/alloca.c config.h $(INCDIR)/ansidecl.h \
+./alloca.lo: $(srcdir)/alloca.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/alloca.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/alloca.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/alloca.c
-./argv.o: $(srcdir)/argv.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/argv.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/argv.c $(OUTPUT_OPTION)
+./argv.lo: $(srcdir)/argv.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/argv.c
-./asprintf.o: $(srcdir)/asprintf.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/asprintf.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/asprintf.c $(OUTPUT_OPTION)
+./asprintf.lo: $(srcdir)/asprintf.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/asprintf.c
-./atexit.o: $(srcdir)/atexit.c config.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/atexit.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/atexit.c $(OUTPUT_OPTION)
+./atexit.lo: $(srcdir)/atexit.c config.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/atexit.c
-./basename.o: $(srcdir)/basename.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+./basename.lo: $(srcdir)/basename.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
$(INCDIR)/safe-ctype.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/basename.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/basename.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/basename.c
-./bcmp.o: $(srcdir)/bcmp.c
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/bcmp.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/bcmp.c $(OUTPUT_OPTION)
+./bcmp.lo: $(srcdir)/bcmp.c
+ $(LTCOMPILE) -c -o $@ $(srcdir)/bcmp.c
-./bcopy.o: $(srcdir)/bcopy.c
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/bcopy.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/bcopy.c $(OUTPUT_OPTION)
+./bcopy.lo: $(srcdir)/bcopy.c
+ $(LTCOMPILE) -c -o $@ $(srcdir)/bcopy.c
-./bsearch.o: $(srcdir)/bsearch.c config.h $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/bsearch.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/bsearch.c $(OUTPUT_OPTION)
+./bsearch.lo: $(srcdir)/bsearch.c config.h $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/bsearch.c
-./bzero.o: $(srcdir)/bzero.c
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/bzero.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/bzero.c $(OUTPUT_OPTION)
+./bzero.lo: $(srcdir)/bzero.c
+ $(LTCOMPILE) -c -o $@ $(srcdir)/bzero.c
-./calloc.o: $(srcdir)/calloc.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/calloc.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/calloc.c $(OUTPUT_OPTION)
+./calloc.lo: $(srcdir)/calloc.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/calloc.c
-./choose-temp.o: $(srcdir)/choose-temp.c config.h $(INCDIR)/ansidecl.h \
+./choose-temp.lo: $(srcdir)/choose-temp.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/choose-temp.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/choose-temp.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/choose-temp.c
-./clock.o: $(srcdir)/clock.c config.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/clock.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/clock.c $(OUTPUT_OPTION)
+./clock.lo: $(srcdir)/clock.c config.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/clock.c
-./concat.o: $(srcdir)/concat.c config.h $(INCDIR)/ansidecl.h \
+./concat.lo: $(srcdir)/concat.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/concat.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/concat.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/concat.c
-./copysign.o: $(srcdir)/copysign.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/copysign.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/copysign.c $(OUTPUT_OPTION)
+./copysign.lo: $(srcdir)/copysign.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/copysign.c
-./cp-demangle.o: $(srcdir)/cp-demangle.c config.h $(INCDIR)/ansidecl.h \
+./cp-demangle.lo: $(srcdir)/cp-demangle.c config.h $(INCDIR)/ansidecl.h \
$(srcdir)/cp-demangle.h $(INCDIR)/demangle.h \
$(INCDIR)/dyn-string.h $(INCDIR)/getopt.h $(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/cp-demangle.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/cp-demangle.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/cp-demangle.c
-./cp-demint.o: $(srcdir)/cp-demint.c config.h $(INCDIR)/ansidecl.h \
+./cp-demint.lo: $(srcdir)/cp-demint.c config.h $(INCDIR)/ansidecl.h \
$(srcdir)/cp-demangle.h $(INCDIR)/demangle.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/cp-demint.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/cp-demint.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/cp-demint.c
-./cplus-dem.o: $(srcdir)/cplus-dem.c config.h $(INCDIR)/ansidecl.h \
+./cplus-dem.lo: $(srcdir)/cplus-dem.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/demangle.h $(INCDIR)/libiberty.h \
$(INCDIR)/safe-ctype.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/cplus-dem.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/cplus-dem.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/cplus-dem.c
-./dyn-string.o: $(srcdir)/dyn-string.c config.h $(INCDIR)/ansidecl.h \
+./dyn-string.lo: $(srcdir)/dyn-string.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/dyn-string.h $(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/dyn-string.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/dyn-string.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/dyn-string.c
-./fdmatch.o: $(srcdir)/fdmatch.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/fdmatch.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/fdmatch.c $(OUTPUT_OPTION)
+./fdmatch.lo: $(srcdir)/fdmatch.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/fdmatch.c
-./ffs.o: $(srcdir)/ffs.c
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/ffs.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/ffs.c $(OUTPUT_OPTION)
+./ffs.lo: $(srcdir)/ffs.c
+ $(LTCOMPILE) -c -o $@ $(srcdir)/ffs.c
-./fibheap.o: $(srcdir)/fibheap.c config.h $(INCDIR)/ansidecl.h \
+./fibheap.lo: $(srcdir)/fibheap.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/fibheap.h $(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/fibheap.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/fibheap.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/fibheap.c
-./floatformat.o: $(srcdir)/floatformat.c config.h $(INCDIR)/ansidecl.h \
+./floatformat.lo: $(srcdir)/floatformat.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/floatformat.h $(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/floatformat.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/floatformat.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/floatformat.c
-./fnmatch.o: $(srcdir)/fnmatch.c config.h $(INCDIR)/fnmatch.h \
+./fnmatch.lo: $(srcdir)/fnmatch.c config.h $(INCDIR)/fnmatch.h \
$(INCDIR)/safe-ctype.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/fnmatch.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/fnmatch.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/fnmatch.c
-./getcwd.o: $(srcdir)/getcwd.c config.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/getcwd.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/getcwd.c $(OUTPUT_OPTION)
+./getcwd.lo: $(srcdir)/getcwd.c config.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/getcwd.c
-./getopt.o: $(srcdir)/getopt.c config.h $(INCDIR)/getopt.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/getopt.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/getopt.c $(OUTPUT_OPTION)
+./getopt.lo: $(srcdir)/getopt.c config.h $(INCDIR)/getopt.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/getopt.c
-./getopt1.o: $(srcdir)/getopt1.c config.h $(INCDIR)/getopt.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/getopt1.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/getopt1.c $(OUTPUT_OPTION)
+./getopt1.lo: $(srcdir)/getopt1.c config.h $(INCDIR)/getopt.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/getopt1.c
-./getpagesize.o: $(srcdir)/getpagesize.c config.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/getpagesize.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/getpagesize.c $(OUTPUT_OPTION)
+./getpagesize.lo: $(srcdir)/getpagesize.c config.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/getpagesize.c
-./getpwd.o: $(srcdir)/getpwd.c config.h $(INCDIR)/ansidecl.h \
+./getpwd.lo: $(srcdir)/getpwd.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/getpwd.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/getpwd.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/getpwd.c
-./getruntime.o: $(srcdir)/getruntime.c config.h $(INCDIR)/ansidecl.h \
+./getruntime.lo: $(srcdir)/getruntime.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/getruntime.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/getruntime.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/getruntime.c
-./hashtab.o: $(srcdir)/hashtab.c config.h $(INCDIR)/ansidecl.h \
+./hashtab.lo: $(srcdir)/hashtab.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/hashtab.h $(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/hashtab.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/hashtab.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/hashtab.c
-./hex.o: $(srcdir)/hex.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+./hex.lo: $(srcdir)/hex.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
$(INCDIR)/safe-ctype.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/hex.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/hex.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/hex.c
-./index.o: $(srcdir)/index.c
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/index.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/index.c $(OUTPUT_OPTION)
+./index.lo: $(srcdir)/index.c
+ $(LTCOMPILE) -c -o $@ $(srcdir)/index.c
-./insque.o: $(srcdir)/insque.c
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/insque.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/insque.c $(OUTPUT_OPTION)
+./insque.lo: $(srcdir)/insque.c
+ $(LTCOMPILE) -c -o $@ $(srcdir)/insque.c
-./lbasename.o: $(srcdir)/lbasename.c $(INCDIR)/ansidecl.h $(INCDIR)/filenames.h \
+./lbasename.lo: $(srcdir)/lbasename.c $(INCDIR)/ansidecl.h $(INCDIR)/filenames.h \
$(INCDIR)/libiberty.h $(INCDIR)/safe-ctype.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/lbasename.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/lbasename.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/lbasename.c
-./lrealpath.o: $(srcdir)/lrealpath.c config.h $(INCDIR)/ansidecl.h \
+./lrealpath.lo: $(srcdir)/lrealpath.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/lrealpath.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/lrealpath.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/lrealpath.c
-./make-relative-prefix.o: $(srcdir)/make-relative-prefix.c config.h \
+./make-relative-prefix.lo: $(srcdir)/make-relative-prefix.c config.h \
$(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/make-relative-prefix.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/make-relative-prefix.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/make-relative-prefix.c
-./make-temp-file.o: $(srcdir)/make-temp-file.c config.h $(INCDIR)/ansidecl.h \
+./make-temp-file.lo: $(srcdir)/make-temp-file.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/make-temp-file.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/make-temp-file.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/make-temp-file.c
-./md5.o: $(srcdir)/md5.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/md5.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/md5.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/md5.c $(OUTPUT_OPTION)
+./md5.lo: $(srcdir)/md5.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/md5.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/md5.c
-./memchr.o: $(srcdir)/memchr.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/memchr.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/memchr.c $(OUTPUT_OPTION)
+./memchr.lo: $(srcdir)/memchr.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/memchr.c
-./memcmp.o: $(srcdir)/memcmp.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/memcmp.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/memcmp.c $(OUTPUT_OPTION)
+./memcmp.lo: $(srcdir)/memcmp.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/memcmp.c
-./memcpy.o: $(srcdir)/memcpy.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/memcpy.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/memcpy.c $(OUTPUT_OPTION)
+./memcpy.lo: $(srcdir)/memcpy.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/memcpy.c
-./memmove.o: $(srcdir)/memmove.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/memmove.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/memmove.c $(OUTPUT_OPTION)
+./memmove.lo: $(srcdir)/memmove.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/memmove.c
-./mempcpy.o: $(srcdir)/mempcpy.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/mempcpy.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/mempcpy.c $(OUTPUT_OPTION)
+./mempcpy.lo: $(srcdir)/mempcpy.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/mempcpy.c
-./memset.o: $(srcdir)/memset.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/memset.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/memset.c $(OUTPUT_OPTION)
+./memset.lo: $(srcdir)/memset.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/memset.c
-./mkstemps.o: $(srcdir)/mkstemps.c config.h $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/mkstemps.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/mkstemps.c $(OUTPUT_OPTION)
+./mkstemps.lo: $(srcdir)/mkstemps.c config.h $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/mkstemps.c
-./mpw.o: $(srcdir)/mpw.c
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/mpw.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/mpw.c $(OUTPUT_OPTION)
+./mpw.lo: $(srcdir)/mpw.c
+ $(LTCOMPILE) -c -o $@ $(srcdir)/mpw.c
-./msdos.o: $(srcdir)/msdos.c
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/msdos.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/msdos.c $(OUTPUT_OPTION)
+./msdos.lo: $(srcdir)/msdos.c
+ $(LTCOMPILE) -c -o $@ $(srcdir)/msdos.c
-./objalloc.o: $(srcdir)/objalloc.c config.h $(INCDIR)/ansidecl.h \
+./objalloc.lo: $(srcdir)/objalloc.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/objalloc.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/objalloc.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/objalloc.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/objalloc.c
-./obstack.o: $(srcdir)/obstack.c config.h $(INCDIR)/obstack.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/obstack.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/obstack.c $(OUTPUT_OPTION)
+./obstack.lo: $(srcdir)/obstack.c config.h $(INCDIR)/obstack.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/obstack.c
-./partition.o: $(srcdir)/partition.c config.h $(INCDIR)/ansidecl.h \
+./partition.lo: $(srcdir)/partition.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(INCDIR)/partition.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/partition.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/partition.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/partition.c
-./pex-djgpp.o: $(srcdir)/pex-djgpp.c config.h $(INCDIR)/ansidecl.h \
+./pex-djgpp.lo: $(srcdir)/pex-djgpp.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-djgpp.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/pex-djgpp.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/pex-djgpp.c
-./pex-mpw.o: $(srcdir)/pex-mpw.c config.h $(INCDIR)/ansidecl.h \
+./pex-mpw.lo: $(srcdir)/pex-mpw.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-mpw.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/pex-mpw.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/pex-mpw.c
-./pex-msdos.o: $(srcdir)/pex-msdos.c config.h $(INCDIR)/ansidecl.h \
+./pex-msdos.lo: $(srcdir)/pex-msdos.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h \
$(INCDIR)/safe-ctype.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-msdos.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/pex-msdos.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/pex-msdos.c
-./pex-os2.o: $(srcdir)/pex-os2.c config.h $(INCDIR)/ansidecl.h \
+./pex-os2.lo: $(srcdir)/pex-os2.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-os2.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/pex-os2.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/pex-os2.c
-./pex-unix.o: $(srcdir)/pex-unix.c config.h $(INCDIR)/ansidecl.h \
+./pex-unix.lo: $(srcdir)/pex-unix.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-unix.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/pex-unix.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/pex-unix.c
-./pex-win32.o: $(srcdir)/pex-win32.c config.h $(INCDIR)/ansidecl.h \
+./pex-win32.lo: $(srcdir)/pex-win32.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-win32.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/pex-win32.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/pex-win32.c
-./physmem.o: $(srcdir)/physmem.c config.h $(INCDIR)/ansidecl.h \
+./physmem.lo: $(srcdir)/physmem.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/physmem.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/physmem.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/physmem.c
-./putenv.o: $(srcdir)/putenv.c config.h $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/putenv.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/putenv.c $(OUTPUT_OPTION)
+./putenv.lo: $(srcdir)/putenv.c config.h $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/putenv.c
-./random.o: $(srcdir)/random.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/random.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/random.c $(OUTPUT_OPTION)
+./random.lo: $(srcdir)/random.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/random.c
-./regex.o: $(srcdir)/regex.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/xregex.h \
+./regex.lo: $(srcdir)/regex.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/xregex.h \
$(INCDIR)/xregex2.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/regex.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/regex.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/regex.c
-./rename.o: $(srcdir)/rename.c config.h $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/rename.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/rename.c $(OUTPUT_OPTION)
+./rename.lo: $(srcdir)/rename.c config.h $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/rename.c
-./rindex.o: $(srcdir)/rindex.c
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/rindex.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/rindex.c $(OUTPUT_OPTION)
+./rindex.lo: $(srcdir)/rindex.c
+ $(LTCOMPILE) -c -o $@ $(srcdir)/rindex.c
-./safe-ctype.o: $(srcdir)/safe-ctype.c $(INCDIR)/ansidecl.h \
+./safe-ctype.lo: $(srcdir)/safe-ctype.c $(INCDIR)/ansidecl.h \
$(INCDIR)/safe-ctype.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/safe-ctype.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/safe-ctype.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/safe-ctype.c
-./setenv.o: $(srcdir)/setenv.c config.h $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/setenv.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/setenv.c $(OUTPUT_OPTION)
+./setenv.lo: $(srcdir)/setenv.c config.h $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/setenv.c
-./sigsetmask.o: $(srcdir)/sigsetmask.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/sigsetmask.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/sigsetmask.c $(OUTPUT_OPTION)
+./sigsetmask.lo: $(srcdir)/sigsetmask.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/sigsetmask.c
-./snprintf.o: $(srcdir)/snprintf.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/snprintf.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/snprintf.c $(OUTPUT_OPTION)
+./snprintf.lo: $(srcdir)/snprintf.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/snprintf.c
-./sort.o: $(srcdir)/sort.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+./sort.lo: $(srcdir)/sort.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
$(INCDIR)/sort.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/sort.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/sort.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/sort.c
-./spaces.o: $(srcdir)/spaces.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/spaces.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/spaces.c $(OUTPUT_OPTION)
+./spaces.lo: $(srcdir)/spaces.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/spaces.c
-./splay-tree.o: $(srcdir)/splay-tree.c config.h $(INCDIR)/ansidecl.h \
+./splay-tree.lo: $(srcdir)/splay-tree.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(INCDIR)/splay-tree.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/splay-tree.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/splay-tree.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/splay-tree.c
-./stpcpy.o: $(srcdir)/stpcpy.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/stpcpy.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/stpcpy.c $(OUTPUT_OPTION)
+./stpcpy.lo: $(srcdir)/stpcpy.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/stpcpy.c
-./stpncpy.o: $(srcdir)/stpncpy.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/stpncpy.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/stpncpy.c $(OUTPUT_OPTION)
+./stpncpy.lo: $(srcdir)/stpncpy.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/stpncpy.c
-./strcasecmp.o: $(srcdir)/strcasecmp.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/strcasecmp.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/strcasecmp.c $(OUTPUT_OPTION)
+./strcasecmp.lo: $(srcdir)/strcasecmp.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/strcasecmp.c
-./strchr.o: $(srcdir)/strchr.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/strchr.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/strchr.c $(OUTPUT_OPTION)
+./strchr.lo: $(srcdir)/strchr.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/strchr.c
-./strdup.o: $(srcdir)/strdup.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/strdup.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/strdup.c $(OUTPUT_OPTION)
+./strdup.lo: $(srcdir)/strdup.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/strdup.c
-./strerror.o: $(srcdir)/strerror.c config.h $(INCDIR)/ansidecl.h \
+./strerror.lo: $(srcdir)/strerror.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/strerror.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/strerror.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/strerror.c
-./strncasecmp.o: $(srcdir)/strncasecmp.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/strncasecmp.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/strncasecmp.c $(OUTPUT_OPTION)
+./strncasecmp.lo: $(srcdir)/strncasecmp.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/strncasecmp.c
-./strncmp.o: $(srcdir)/strncmp.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/strncmp.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/strncmp.c $(OUTPUT_OPTION)
+./strncmp.lo: $(srcdir)/strncmp.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/strncmp.c
-./strrchr.o: $(srcdir)/strrchr.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/strrchr.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/strrchr.c $(OUTPUT_OPTION)
+./strrchr.lo: $(srcdir)/strrchr.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/strrchr.c
-./strsignal.o: $(srcdir)/strsignal.c config.h $(INCDIR)/ansidecl.h \
+./strsignal.lo: $(srcdir)/strsignal.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/strsignal.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/strsignal.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/strsignal.c
-./strstr.o: $(srcdir)/strstr.c
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/strstr.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/strstr.c $(OUTPUT_OPTION)
+./strstr.lo: $(srcdir)/strstr.c
+ $(LTCOMPILE) -c -o $@ $(srcdir)/strstr.c
-./strtod.o: $(srcdir)/strtod.c $(INCDIR)/ansidecl.h $(INCDIR)/safe-ctype.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/strtod.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/strtod.c $(OUTPUT_OPTION)
+./strtod.lo: $(srcdir)/strtod.c $(INCDIR)/ansidecl.h $(INCDIR)/safe-ctype.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/strtod.c
-./strtol.o: $(srcdir)/strtol.c config.h $(INCDIR)/safe-ctype.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/strtol.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/strtol.c $(OUTPUT_OPTION)
+./strtol.lo: $(srcdir)/strtol.c config.h $(INCDIR)/safe-ctype.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/strtol.c
-./strtoul.o: $(srcdir)/strtoul.c config.h $(INCDIR)/ansidecl.h \
+./strtoul.lo: $(srcdir)/strtoul.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/safe-ctype.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/strtoul.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/strtoul.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/strtoul.c
-./ternary.o: $(srcdir)/ternary.c config.h $(INCDIR)/ansidecl.h \
+./ternary.lo: $(srcdir)/ternary.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(INCDIR)/ternary.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/ternary.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/ternary.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/ternary.c
-./tmpnam.o: $(srcdir)/tmpnam.c
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/tmpnam.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/tmpnam.c $(OUTPUT_OPTION)
+./tmpnam.lo: $(srcdir)/tmpnam.c
+ $(LTCOMPILE) -c -o $@ $(srcdir)/tmpnam.c
-./vasprintf.o: $(srcdir)/vasprintf.c config.h $(INCDIR)/ansidecl.h \
+./vasprintf.lo: $(srcdir)/vasprintf.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/vasprintf.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/vasprintf.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/vasprintf.c
-./vfork.o: $(srcdir)/vfork.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/vfork.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/vfork.c $(OUTPUT_OPTION)
+./vfork.lo: $(srcdir)/vfork.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/vfork.c
-./vfprintf.o: $(srcdir)/vfprintf.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/vfprintf.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/vfprintf.c $(OUTPUT_OPTION)
+./vfprintf.lo: $(srcdir)/vfprintf.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/vfprintf.c
-./vprintf.o: $(srcdir)/vprintf.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/vprintf.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/vprintf.c $(OUTPUT_OPTION)
+./vprintf.lo: $(srcdir)/vprintf.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/vprintf.c
-./vsnprintf.o: $(srcdir)/vsnprintf.c config.h $(INCDIR)/ansidecl.h \
+./vsnprintf.lo: $(srcdir)/vsnprintf.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/vsnprintf.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/vsnprintf.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/vsnprintf.c
-./vsprintf.o: $(srcdir)/vsprintf.c $(INCDIR)/ansidecl.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/vsprintf.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/vsprintf.c $(OUTPUT_OPTION)
+./vsprintf.lo: $(srcdir)/vsprintf.c $(INCDIR)/ansidecl.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/vsprintf.c
-./waitpid.o: $(srcdir)/waitpid.c config.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/waitpid.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/waitpid.c $(OUTPUT_OPTION)
+./waitpid.lo: $(srcdir)/waitpid.c config.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/waitpid.c
-./xatexit.o: $(srcdir)/xatexit.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/xatexit.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/xatexit.c $(OUTPUT_OPTION)
+./xatexit.lo: $(srcdir)/xatexit.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/xatexit.c
-./xexit.o: $(srcdir)/xexit.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/xexit.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/xexit.c $(OUTPUT_OPTION)
+./xexit.lo: $(srcdir)/xexit.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+ $(LTCOMPILE) -c -o $@ $(srcdir)/xexit.c
-./xmalloc.o: $(srcdir)/xmalloc.c config.h $(INCDIR)/ansidecl.h \
+./xmalloc.lo: $(srcdir)/xmalloc.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/xmalloc.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/xmalloc.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/xmalloc.c
-./xmemdup.o: $(srcdir)/xmemdup.c config.h $(INCDIR)/ansidecl.h \
+./xmemdup.lo: $(srcdir)/xmemdup.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/xmemdup.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/xmemdup.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/xmemdup.c
-./xstrdup.o: $(srcdir)/xstrdup.c config.h $(INCDIR)/ansidecl.h \
+./xstrdup.lo: $(srcdir)/xstrdup.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/xstrdup.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/xstrdup.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/xstrdup.c
-./xstrerror.o: $(srcdir)/xstrerror.c config.h $(INCDIR)/ansidecl.h \
+./xstrerror.lo: $(srcdir)/xstrerror.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/xstrerror.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/xstrerror.c $(OUTPUT_OPTION)
+ $(LTCOMPILE) -c -o $@ $(srcdir)/xstrerror.c
-# Don't export variables to the environment, in order to not confuse
-# configure.
-.NOEXPORT:
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS libiberty_topdir MAINT NOTMAINT MAKEINFO BUILD_INFO PERL HAVE_PERL build build_cpu build_vendor build_os host host_cpu host_vendor host_os AR ac_ct_AR RANLIB ac_ct_RANLIB CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP ac_libiberty_warn_cflags NO_MINUS_C_MINUS_O OUTPUT_OPTION INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA EGREP LIBOBJS CHECK target_header_dir pexecute INSTALL_DEST LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS libiberty_topdir MAINT NOTMAINT MAKEINFO BUILD_INFO PERL HAVE_PERL build build_cpu build_vendor build_os host host_cpu host_vendor host_os AR ac_ct_AR RANLIB ac_ct_RANLIB CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP LN_S STRIP ac_ct_STRIP LIBTOOL ac_libiberty_warn_cflags INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA EGREP LIBOBJS CHECK target_header_dir pexecute ltpexecute INSTALL_DEST LTLIBOBJS'
ac_subst_files='host_makefile_frag'
# Initialize some variables set by options.
--enable-maintainer-mode
enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
+ --enable-shared=PKGS build shared libraries default=yes
+ --enable-static=PKGS build static libraries default=yes
+ --enable-fast-install=PKGS optimize for fast installation default=yes
+ --disable-libtool-lock avoid locking (might break parallel builds)
--enable-install-libiberty Install headers for end users
Optional Packages:
--with-build-subdir=SUBDIR Configuring in a subdirectory for build
--with-cross-host=HOST Configuring with a cross compiler
--with-newlib Configuring with newlib
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-pic try to use only PIC/non-PIC objects default=use both
Some influential environment variables:
CC C compiler command
else
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
fi
- cd "$ac_popdir"
+ cd $ac_popdir
done
fi
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
ac_c_preproc_warn_flag=yes
-if test x$GCC = xyes; then
- ac_libiberty_warn_cflags='-W -Wall -Wtraditional -pedantic'
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_shared=yes
+fi;
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+ enableval="$enable_static"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_static=yes
+fi;
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+ enableval="$enable_fast_install"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_fast_install=yes
+fi;
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi;
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo "$as_me:$LINENO: checking for ld used by GCC" >&5
+echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+else
+ echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+fi
+if test "${lt_cv_path_LD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
fi
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+ { (exit 1); exit 1; }; }
+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+if test "${lt_cv_prog_gnu_ld+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ lt_cv_prog_gnu_ld=yes
+else
+ lt_cv_prog_gnu_ld=no
+fi
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
-if test "x$CC" != xcc; then
- echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5
-echo $ECHO_N "checking whether $CC and cc understand -c and -o together... $ECHO_C" >&6
+
+echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
+if test "${lt_cv_ld_reload_flag+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5
-echo $ECHO_N "checking whether cc understands -c and -o together... $ECHO_C" >&6
+ lt_cv_ld_reload_flag='-r'
fi
-set dummy $CC; ac_cc=`echo $2 |
- sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-if eval "test \"\${ac_cv_prog_cc_${ac_cc}_c_o+set}\" = set"; then
+echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
+echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
+if test "${lt_cv_path_NM+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat >conftest.$ac_ext <<_ACEOF
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ else
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi
+fi
+
+NM="$lt_cv_path_NM"
+echo "$as_me:$LINENO: result: $NM" >&5
+echo "${ECHO_T}$NM" >&6
+
+echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6
+fi
+
+echo "$as_me:$LINENO: checking how to recognise dependant libraries" >&5
+echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6
+if test "${lt_cv_deplibs_check_method+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi4*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin* | mingw* |pw32*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ case "$host_os" in
+ rhapsody* | darwin1.012)
+ lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
+ ;;
+ *) # Darwin 1.3 on
+ lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+ ;;
+ esac
+ ;;
+
+freebsd* | kfreebsd*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20*|hpux11*)
+ case $host_cpu in
+ hppa*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ esac
+ ;;
+
+irix5* | irix6*)
+ case $host_os in
+ irix5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ case $host_cpu in
+ alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
+netbsd* | knetbsd*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
+ fi
+ ;;
+
+newsos6)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+sysv5uw[78]* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case $host_vendor in
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ esac
+ ;;
+esac
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+
+
+
+
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ echo "$as_me:$LINENO: checking for file" >&5
+echo $ECHO_N "checking for file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ RANLIB=$ac_ct_RANLIB
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ STRIP=$ac_ct_STRIP
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+
+fi;
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+ withval="$with_pic"
+ pic_mode="$withval"
+else
+ pic_mode=default
+fi;
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line 3678 "configure"' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ case "`/usr/bin/file conftest.o`" in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
+if test "${lt_cv_cc_needs_belf+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ if test x$gcc_no_link = xyes; then
+ { { echo "$as_me:$LINENO: error: Link tests are not allowed after GCC_NO_EXECUTABLES." >&5
+echo "$as_me: error: Link tests are not allowed after GCC_NO_EXECUTABLES." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
return 0;
}
_ACEOF
-# Make sure it works both with $CC and with simple cc.
-# We do the test twice because some compilers refuse to overwrite an
-# existing .o file with -o, though they will create one.
-ac_try='$CC -c conftest.$ac_ext -o conftest.$ac_objext >&5'
-if { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- test -f conftest.$ac_objext && { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); };
-then
- eval ac_cv_prog_cc_${ac_cc}_c_o=yes
- if test "x$CC" != xcc; then
- # Test first that cc exists at all.
- if { ac_try='cc -c conftest.$ac_ext >&5'
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_try='cc -c conftest.$ac_ext -o conftest.$ac_objext >&5'
- if { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- test -f conftest.$ac_objext && { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); };
- then
- # cc works too.
- :
- else
- # cc exists but doesn't like -o.
- eval ac_cv_prog_cc_${ac_cc}_c_o=no
- fi
- fi
- fi
+ lt_cv_cc_needs_belf=yes
else
- eval ac_cv_prog_cc_${ac_cc}_c_o=no
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+lt_cv_cc_needs_belf=no
fi
-rm -f conftest*
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
-if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+
+esac
+
+
+# Save cache, so that ltconfig can load it
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
-cat >>confdefs.h <<\_ACEOF
-#define NO_MINUS_C_MINUS_O 1
_ACEOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+ (set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+} |
+ sed '
+ t clear
+ : clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+ if test -w $cache_file; then
+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ cat confcache >$cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
fi
+rm -f confcache
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
+|| { { echo "$as_me:$LINENO: error: libtool configure failed" >&5
+echo "$as_me: error: libtool configure failed" >&2;}
+ { (exit 1); exit 1; }; }
-# autoconf is lame and doesn't give us any substitution variable for this.
-if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
- NO_MINUS_C_MINUS_O=yes
+# Reload cache, that may have been modified by ltconfig
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . $cache_file;;
+ *) . ./$cache_file;;
+ esac
+ fi
else
- OUTPUT_OPTION='-o $@'
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
fi
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+
+
+
+
+
+
+
+if test x$GCC = xyes; then
+ ac_libiberty_warn_cflags='-W -Wall -Wtraditional -pedantic'
+fi
echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
-echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
else
cat >conftest.$ac_ext <<_ACEOF
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
# Figure out which version of pexecute to use.
case "${host}" in
- *-*-mingw* | *-*-winnt*) pexecute=./pex-win32.o ;;
- *-*-msdosdjgpp*) pexecute=./pex-djgpp.o ;;
- *-*-msdos*) pexecute=./pex-msdos.o ;;
- *-*-os2-emx*) pexecute=./pex-os2.o ;;
- *) pexecute=./pex-unix.o ;;
+ *-*-mingw* | *-*-winnt*) pex=./pex-win32 ;;
+ *-*-msdosdjgpp*) pex=./pex-djgpp ;;
+ *-*-msdos*) pex=./pex-msdos ;;
+ *-*-os2-emx*) pex=./pex-os2 ;;
+ *) pex=./pex-unix ;;
esac
+pexecute=${pex}.o
+ltpexecute=${pex}.lo
+
if test x$gcc_no_link = xyes; then
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
fi
-
-L=""
-for l in x $LIBOBJS; do
- case $l in
- x) ;;
- *) L="$L ./$l" ;;
- esac
-done
-LIBOBJS="$L"
-
# We need multilib support, but only if configuring for the target.
ac_config_files="$ac_config_files Makefile testsuite/Makefile"
s,@EXEEXT@,$EXEEXT,;t t
s,@OBJEXT@,$OBJEXT,;t t
s,@CPP@,$CPP,;t t
+s,@LN_S@,$LN_S,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@LIBTOOL@,$LIBTOOL,;t t
s,@ac_libiberty_warn_cflags@,$ac_libiberty_warn_cflags,;t t
-s,@NO_MINUS_C_MINUS_O@,$NO_MINUS_C_MINUS_O,;t t
-s,@OUTPUT_OPTION@,$OUTPUT_OPTION,;t t
s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
s,@INSTALL_DATA@,$INSTALL_DATA,;t t
s,@CHECK@,$CHECK,;t t
s,@target_header_dir@,$target_header_dir,;t t
s,@pexecute@,$pexecute,;t t
+s,@ltpexecute@,$ltpexecute,;t t
s,@INSTALL_DEST@,$INSTALL_DEST,;t t
s,@LTLIBOBJS@,$LTLIBOBJS,;t t
/@host_makefile_frag@/r $host_makefile_frag
*) ac_INSTALL=$ac_top_builddir$INSTALL ;;
esac
+ if test x"$ac_file" != x-; then
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ rm -f "$ac_file"
+ fi
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
fi;;
esac
done` || { (exit 1); exit 1; }
-
- if test x"$ac_file" != x-; then
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
sed "$ac_vpsub
OSDN Git Service
