ARM: dts: imx28-duckbill: fix phy reset gpio

Fix a copy & paste error: on duckbills the GPIO used for resetting
the ethernet phy differs from FSL's MX28EVK board.

Reported-by: Stefan Wahren <info@lategoodbye.de>
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
index a697870..91c1a9a 100644 (file)
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ b/arch/arm/boot/dts/imx28-duckbill.dts
@@ -39,7 +39,7 @@
                                hog_pins_a: hog@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
-                                               MX28_PAD_ENET0_RX_CLK__GPIO_4_13 /* PHY Reset */
+                                               MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */
                                        >;
                                        fsl,drive-strength = <MXS_DRIVE_4mA>;
                                        fsl,voltage = <MXS_VOLTAGE_HIGH>;
@@ -82,7 +82,7 @@
                        pinctrl-names = "default";
                        pinctrl-0 = <&mac0_pins_a>;
                        phy-supply = <&reg_3p3v>;
-                       phy-reset-gpios = <&gpio4 13 0>;
+                       phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
                        phy-reset-duration = <100>;
                        status = "okay";
                };