phy: rcar-gen3-usb2: add SoC-specific parameter for dedicated pins

This patch adds SoC-specific parameter to avoid reading/writing
specific registers wrongly if this driver runs on a SoC which doesn't
have dedicated pins (e.g. R-Car D3). This patch also changes the
value "has_otg" to "has_otg_pins" for slightly easier reading of
the code.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 00a8303..479ae94 100644 (file)
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
@@ -80,6 +81,8 @@
 #define USB2_ADPCTRL_IDPULLUP          BIT(5)  /* 1 = ID sampling is enabled */
 #define USB2_ADPCTRL_DRVVBUS           BIT(4)
 
+#define RCAR_GEN3_PHY_HAS_DEDICATED_PINS       1
+
 struct rcar_gen3_chan {
        void __iomem *base;
        struct extcon_dev *extcon;
@@ -87,7 +90,7 @@ struct rcar_gen3_chan {
        struct regulator *vbus;
        struct work_struct work;
        bool extcon_host;
-       bool has_otg;
+       bool has_otg_pins;
 };
 
 static void rcar_gen3_phy_usb2_work(struct work_struct *work)
@@ -234,7 +237,7 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr,
        bool is_b_device;
        enum phy_mode cur_mode, new_mode;
 
-       if (!ch->has_otg || !ch->phy->init_count)
+       if (!ch->has_otg_pins || !ch->phy->init_count)
                return -EIO;
 
        if (!strncmp(buf, "host", strlen("host")))
@@ -272,7 +275,7 @@ static ssize_t role_show(struct device *dev, struct device_attribute *attr,
 {
        struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
 
-       if (!ch->has_otg || !ch->phy->init_count)
+       if (!ch->has_otg_pins || !ch->phy->init_count)
                return -EIO;
 
        return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" :
@@ -311,7 +314,7 @@ static int rcar_gen3_phy_usb2_init(struct phy *p)
        writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
 
        /* Initialize otg part */
-       if (channel->has_otg)
+       if (channel->has_otg_pins)
                rcar_gen3_init_otg(channel);
 
        return 0;
@@ -385,9 +388,17 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
 }
 
 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
-       { .compatible = "renesas,usb2-phy-r8a7795" },
-       { .compatible = "renesas,usb2-phy-r8a7796" },
-       { .compatible = "renesas,rcar-gen3-usb2-phy" },
+       {
+               .compatible = "renesas,usb2-phy-r8a7795",
+               .data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
+       },
+       {
+               .compatible = "renesas,usb2-phy-r8a7796",
+               .data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
+       },
+       {
+               .compatible = "renesas,rcar-gen3-usb2-phy",
+       },
        { }
 };
 MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
@@ -433,7 +444,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
        if (of_usb_get_dr_mode_by_phy(dev->of_node, 0) == USB_DR_MODE_OTG) {
                int ret;
 
-               channel->has_otg = true;
+               channel->has_otg_pins = (uintptr_t)of_device_get_match_data(dev);
                channel->extcon = devm_extcon_dev_allocate(dev,
                                                        rcar_gen3_phy_cable);
                if (IS_ERR(channel->extcon))
@@ -475,7 +486,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
                dev_err(dev, "Failed to register PHY provider\n");
                ret = PTR_ERR(provider);
                goto error;
-       } else if (channel->has_otg) {
+       } else if (channel->has_otg_pins) {
                int ret;
 
                ret = device_create_file(dev, &dev_attr_role);
@@ -495,7 +506,7 @@ static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
 {
        struct rcar_gen3_chan *channel = platform_get_drvdata(pdev);
 
-       if (channel->has_otg)
+       if (channel->has_otg_pins)
                device_remove_file(&pdev->dev, &dev_attr_role);
 
        pm_runtime_disable(&pdev->dev);