return dal_pixel_format;
}
-static void rect_swap_helper(struct rect *rect)
-{
- swap(rect->height, rect->width);
- swap(rect->x, rect->y);
+static inline void get_vp_scan_direction(
+ enum dc_rotation_angle rotation,
+ bool horizontal_mirror,
+ bool *orthogonal_rotation,
+ bool *flip_vert_scan_dir,
+ bool *flip_horz_scan_dir)
+{
+ *orthogonal_rotation = false;
+ *flip_vert_scan_dir = false;
+ *flip_horz_scan_dir = false;
+ if (rotation == ROTATION_ANGLE_180) {
+ *flip_vert_scan_dir = true;
+ *flip_horz_scan_dir = true;
+ } else if (rotation == ROTATION_ANGLE_90) {
+ *orthogonal_rotation = true;
+ *flip_horz_scan_dir = true;
+ } else if (rotation == ROTATION_ANGLE_270) {
+ *orthogonal_rotation = true;
+ *flip_vert_scan_dir = true;
+ }
+
+ if (horizontal_mirror)
+ *flip_horz_scan_dir = !*flip_horz_scan_dir;
}
static void calculate_viewport(struct pipe_ctx *pipe_ctx)
const struct dc_stream_state *stream = pipe_ctx->stream;
struct scaler_data *data = &pipe_ctx->plane_res.scl_data;
struct rect surf_src = plane_state->src_rect;
- struct rect clip = { 0 };
+ struct rect clip, dest;
int vpc_div = (data->format == PIXEL_FORMAT_420BPP8
|| data->format == PIXEL_FORMAT_420BPP10) ? 2 : 1;
bool pri_split = pipe_ctx->bottom_pipe &&
pipe_ctx->bottom_pipe->plane_state == pipe_ctx->plane_state;
bool sec_split = pipe_ctx->top_pipe &&
pipe_ctx->top_pipe->plane_state == pipe_ctx->plane_state;
- bool flip_vert_scan_dir = false, flip_horz_scan_dir = false;
-
-
- /*
- * We need take horizontal mirror into account. On an unrotated surface this means
- * that the viewport offset is actually the offset from the other side of source
- * image so we have to subtract the right edge of the viewport from the right edge of
- * the source window. Similar to mirror we need to take into account how offset is
- * affected for 270/180 rotations
- */
- if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_180) {
- flip_vert_scan_dir = true;
- flip_horz_scan_dir = true;
- } else if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_90)
- flip_vert_scan_dir = true;
- else if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_270)
- flip_horz_scan_dir = true;
-
- if (pipe_ctx->plane_state->horizontal_mirror)
- flip_horz_scan_dir = !flip_horz_scan_dir;
+ bool orthogonal_rotation, flip_y_start, flip_x_start;
if (stream->view_format == VIEW_3D_FORMAT_SIDE_BY_SIDE ||
stream->view_format == VIEW_3D_FORMAT_TOP_AND_BOTTOM) {
sec_split = false;
}
- if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_90 ||
- pipe_ctx->plane_state->rotation == ROTATION_ANGLE_270)
- rect_swap_helper(&surf_src);
-
/* The actual clip is an intersection between stream
* source and surface clip
*/
+ dest = plane_state->dst_rect;
clip.x = stream->src.x > plane_state->clip_rect.x ?
stream->src.x : plane_state->clip_rect.x;
stream->src.y + stream->src.height - clip.y :
plane_state->clip_rect.y + plane_state->clip_rect.height - clip.y ;
- /* offset = surf_src.ofs + (clip.ofs - surface->dst_rect.ofs) * scl_ratio
- * note: surf_src.ofs should be added after rotation/mirror offset direction
- * adjustment since it is already in viewport space
- * num_pixels = clip.num_pix * scl_ratio
+ /*
+ * Need to calculate how scan origin is shifted in vp space
+ * to correctly rotate clip and dst
*/
- data->viewport.x = (clip.x - plane_state->dst_rect.x) *
- surf_src.width / plane_state->dst_rect.width;
- data->viewport.width = clip.width *
- surf_src.width / plane_state->dst_rect.width;
+ get_vp_scan_direction(
+ plane_state->rotation,
+ plane_state->horizontal_mirror,
+ &orthogonal_rotation,
+ &flip_y_start,
+ &flip_x_start);
- data->viewport.y = (clip.y - plane_state->dst_rect.y) *
- surf_src.height / plane_state->dst_rect.height;
- data->viewport.height = clip.height *
- surf_src.height / plane_state->dst_rect.height;
-
- if (flip_vert_scan_dir)
- data->viewport.y = surf_src.height - data->viewport.y - data->viewport.height;
- if (flip_horz_scan_dir)
- data->viewport.x = surf_src.width - data->viewport.x - data->viewport.width;
+ if (orthogonal_rotation) {
+ swap(clip.x, clip.y);
+ swap(clip.width, clip.height);
+ swap(dest.x, dest.y);
+ swap(dest.width, dest.height);
+ }
+ if (flip_x_start) {
+ clip.x = dest.x + dest.width - clip.x - clip.width;
+ dest.x = 0;
+ }
+ if (flip_y_start) {
+ clip.y = dest.y + dest.height - clip.y - clip.height;
+ dest.y = 0;
+ }
- data->viewport.x += surf_src.x;
- data->viewport.y += surf_src.y;
+ /* offset = surf_src.ofs + (clip.ofs - surface->dst_rect.ofs) * scl_ratio
+ * num_pixels = clip.num_pix * scl_ratio
+ */
+ data->viewport.x = surf_src.x + (clip.x - dest.x) * surf_src.width / dest.width;
+ data->viewport.width = clip.width * surf_src.width / dest.width;
+
+ data->viewport.y = surf_src.y + (clip.y - dest.y) * surf_src.height / dest.height;
+ data->viewport.height = clip.height * surf_src.height / dest.height;
+
+ /* Handle split */
+ if (pri_split || sec_split) {
+ if (orthogonal_rotation) {
+ if (flip_y_start != pri_split)
+ data->viewport.height /= 2;
+ else {
+ data->viewport.y += data->viewport.height / 2;
+ /* Ceil offset pipe */
+ data->viewport.height = (data->viewport.height + 1) / 2;
+ }
+ } else {
+ if (flip_x_start != pri_split)
+ data->viewport.width /= 2;
+ else {
+ data->viewport.x += data->viewport.width / 2;
+ /* Ceil offset pipe */
+ data->viewport.width = (data->viewport.width + 1) / 2;
+ }
+ }
+ }
/* Round down, compensate in init */
data->viewport_c.x = data->viewport.x / vpc_div;
data->viewport_c.y = data->viewport.y / vpc_div;
- data->inits.h_c = (data->viewport.x % vpc_div) != 0 ?
- dc_fixpt_half : dc_fixpt_zero;
- data->inits.v_c = (data->viewport.y % vpc_div) != 0 ?
- dc_fixpt_half : dc_fixpt_zero;
+ data->inits.h_c = (data->viewport.x % vpc_div) != 0 ? dc_fixpt_half : dc_fixpt_zero;
+ data->inits.v_c = (data->viewport.y % vpc_div) != 0 ? dc_fixpt_half : dc_fixpt_zero;
+
/* Round up, assume original video size always even dimensions */
data->viewport_c.width = (data->viewport.width + vpc_div - 1) / vpc_div;
data->viewport_c.height = (data->viewport.height + vpc_div - 1) / vpc_div;
-
- /* Handle hsplit */
- if (sec_split) {
- data->viewport.x += data->viewport.width / 2;
- data->viewport_c.x += data->viewport_c.width / 2;
- /* Ceil offset pipe */
- data->viewport.width = (data->viewport.width + 1) / 2;
- data->viewport_c.width = (data->viewport_c.width + 1) / 2;
- } else if (pri_split) {
- if (data->viewport.width > 1)
- data->viewport.width /= 2;
- if (data->viewport_c.width > 1)
- data->viewport_c.width /= 2;
- }
-
- if (plane_state->rotation == ROTATION_ANGLE_90 ||
- plane_state->rotation == ROTATION_ANGLE_270) {
- rect_swap_helper(&data->viewport_c);
- rect_swap_helper(&data->viewport);
- }
}
-static void calculate_recout(struct pipe_ctx *pipe_ctx, struct rect *recout_full)
+static void calculate_recout(struct pipe_ctx *pipe_ctx)
{
const struct dc_plane_state *plane_state = pipe_ctx->plane_state;
const struct dc_stream_state *stream = pipe_ctx->stream;
- struct rect surf_src = plane_state->src_rect;
struct rect surf_clip = plane_state->clip_rect;
bool pri_split = pipe_ctx->bottom_pipe &&
pipe_ctx->bottom_pipe->plane_state == pipe_ctx->plane_state;
pipe_ctx->top_pipe->plane_state == pipe_ctx->plane_state;
bool top_bottom_split = stream->view_format == VIEW_3D_FORMAT_TOP_AND_BOTTOM;
- if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_90 ||
- pipe_ctx->plane_state->rotation == ROTATION_ANGLE_270)
- rect_swap_helper(&surf_src);
-
pipe_ctx->plane_res.scl_data.recout.x = stream->dst.x;
if (stream->src.x < surf_clip.x)
pipe_ctx->plane_res.scl_data.recout.x += (surf_clip.x
stream->dst.y + stream->dst.height
- pipe_ctx->plane_res.scl_data.recout.y;
- /* Handle h & vsplit */
+ /* Handle h & v split, handle rotation using viewport */
if (sec_split && top_bottom_split) {
pipe_ctx->plane_res.scl_data.recout.y +=
pipe_ctx->plane_res.scl_data.recout.height / 2;
(pipe_ctx->plane_res.scl_data.recout.height + 1) / 2;
} else if (pri_split && top_bottom_split)
pipe_ctx->plane_res.scl_data.recout.height /= 2;
- else if (pri_split || sec_split) {
- /* HMirror XOR Secondary_pipe XOR Rotation_180 */
- bool right_view = (sec_split != plane_state->horizontal_mirror) !=
- (plane_state->rotation == ROTATION_ANGLE_180);
-
- if (plane_state->rotation == ROTATION_ANGLE_90
- || plane_state->rotation == ROTATION_ANGLE_270)
- /* Secondary_pipe XOR Rotation_270 */
- right_view = (plane_state->rotation == ROTATION_ANGLE_270) != sec_split;
-
- if (right_view) {
- pipe_ctx->plane_res.scl_data.recout.x +=
- pipe_ctx->plane_res.scl_data.recout.width / 2;
- /* Ceil offset pipe */
- pipe_ctx->plane_res.scl_data.recout.width =
- (pipe_ctx->plane_res.scl_data.recout.width + 1) / 2;
- } else {
- if (pipe_ctx->plane_res.scl_data.recout.width > 1)
- pipe_ctx->plane_res.scl_data.recout.width /= 2;
- }
- }
- /* Unclipped recout offset = stream dst offset + ((surf dst offset - stream surf_src offset)
- * * 1/ stream scaling ratio) - (surf surf_src offset * 1/ full scl
- * ratio)
- */
- recout_full->x = stream->dst.x + (plane_state->dst_rect.x - stream->src.x)
- * stream->dst.width / stream->src.width -
- surf_src.x * plane_state->dst_rect.width / surf_src.width
- * stream->dst.width / stream->src.width;
- recout_full->y = stream->dst.y + (plane_state->dst_rect.y - stream->src.y)
- * stream->dst.height / stream->src.height -
- surf_src.y * plane_state->dst_rect.height / surf_src.height
- * stream->dst.height / stream->src.height;
-
- recout_full->width = plane_state->dst_rect.width
- * stream->dst.width / stream->src.width;
- recout_full->height = plane_state->dst_rect.height
- * stream->dst.height / stream->src.height;
+ else if (sec_split) {
+ pipe_ctx->plane_res.scl_data.recout.x +=
+ pipe_ctx->plane_res.scl_data.recout.width / 2;
+ /* Ceil offset pipe */
+ pipe_ctx->plane_res.scl_data.recout.width =
+ (pipe_ctx->plane_res.scl_data.recout.width + 1) / 2;
+ } else if (pri_split)
+ pipe_ctx->plane_res.scl_data.recout.width /= 2;
}
static void calculate_scaling_ratios(struct pipe_ctx *pipe_ctx)
const int out_w = stream->dst.width;
const int out_h = stream->dst.height;
+ /*Swap surf_src height and width since scaling ratios are in recout rotation*/
if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_90 ||
pipe_ctx->plane_state->rotation == ROTATION_ANGLE_270)
- rect_swap_helper(&surf_src);
+ swap(surf_src.height, surf_src.width);
pipe_ctx->plane_res.scl_data.ratios.horz = dc_fixpt_from_fraction(
surf_src.width,
pipe_ctx->plane_res.scl_data.ratios.vert_c, 19);
}
-static void calculate_inits_and_adj_vp(struct pipe_ctx *pipe_ctx, struct rect *recout_full)
+static inline void adjust_vp_and_init_for_seamless_clip(
+ bool flip_scan_dir,
+ int recout_skip,
+ int src_size,
+ int taps,
+ struct fixed31_32 ratio,
+ struct fixed31_32 *init,
+ int *vp_offset,
+ int *vp_size)
{
- struct scaler_data *data = &pipe_ctx->plane_res.scl_data;
- struct rect src = pipe_ctx->plane_state->src_rect;
- int vpc_div = (data->format == PIXEL_FORMAT_420BPP8
- || data->format == PIXEL_FORMAT_420BPP10) ? 2 : 1;
- bool flip_vert_scan_dir = false, flip_horz_scan_dir = false;
-
- /*
- * Need to calculate the scan direction for viewport to make adjustments
- */
- if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_180) {
- flip_vert_scan_dir = true;
- flip_horz_scan_dir = true;
- } else if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_90)
- flip_vert_scan_dir = true;
- else if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_270)
- flip_horz_scan_dir = true;
-
- if (pipe_ctx->plane_state->horizontal_mirror)
- flip_horz_scan_dir = !flip_horz_scan_dir;
-
- if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_90 ||
- pipe_ctx->plane_state->rotation == ROTATION_ANGLE_270) {
- rect_swap_helper(&src);
- rect_swap_helper(&data->viewport_c);
- rect_swap_helper(&data->viewport);
- }
-
- /*
- * Init calculated according to formula:
- * init = (scaling_ratio + number_of_taps + 1) / 2
- * init_bot = init + scaling_ratio
- * init_c = init + truncated_vp_c_offset(from calculate viewport)
- */
- data->inits.h = dc_fixpt_truncate(dc_fixpt_div_int(
- dc_fixpt_add_int(data->ratios.horz, data->taps.h_taps + 1), 2), 19);
-
- data->inits.h_c = dc_fixpt_truncate(dc_fixpt_add(data->inits.h_c, dc_fixpt_div_int(
- dc_fixpt_add_int(data->ratios.horz_c, data->taps.h_taps_c + 1), 2)), 19);
-
- data->inits.v = dc_fixpt_truncate(dc_fixpt_div_int(
- dc_fixpt_add_int(data->ratios.vert, data->taps.v_taps + 1), 2), 19);
-
- data->inits.v_c = dc_fixpt_truncate(dc_fixpt_add(data->inits.v_c, dc_fixpt_div_int(
- dc_fixpt_add_int(data->ratios.vert_c, data->taps.v_taps_c + 1), 2)), 19);
-
- if (!flip_horz_scan_dir) {
+ if (!flip_scan_dir) {
/* Adjust for viewport end clip-off */
- if ((data->viewport.x + data->viewport.width) < (src.x + src.width)) {
- int vp_clip = src.x + src.width - data->viewport.width - data->viewport.x;
- int int_part = dc_fixpt_floor(
- dc_fixpt_sub(data->inits.h, data->ratios.horz));
-
- int_part = int_part > 0 ? int_part : 0;
- data->viewport.width += int_part < vp_clip ? int_part : vp_clip;
- }
- if ((data->viewport_c.x + data->viewport_c.width) < (src.x + src.width) / vpc_div) {
- int vp_clip = (src.x + src.width) / vpc_div -
- data->viewport_c.width - data->viewport_c.x;
- int int_part = dc_fixpt_floor(
- dc_fixpt_sub(data->inits.h_c, data->ratios.horz_c));
+ if ((*vp_offset + *vp_size) < src_size) {
+ int vp_clip = src_size - *vp_size - *vp_offset;
+ int int_part = dc_fixpt_floor(dc_fixpt_sub(*init, ratio));
int_part = int_part > 0 ? int_part : 0;
- data->viewport_c.width += int_part < vp_clip ? int_part : vp_clip;
+ *vp_size += int_part < vp_clip ? int_part : vp_clip;
}
/* Adjust for non-0 viewport offset */
- if (data->viewport.x) {
+ if (*vp_offset) {
int int_part;
- data->inits.h = dc_fixpt_add(data->inits.h, dc_fixpt_mul_int(
- data->ratios.horz, data->recout.x - recout_full->x));
- int_part = dc_fixpt_floor(data->inits.h) - data->viewport.x;
- if (int_part < data->taps.h_taps) {
- int int_adj = data->viewport.x >= (data->taps.h_taps - int_part) ?
- (data->taps.h_taps - int_part) : data->viewport.x;
- data->viewport.x -= int_adj;
- data->viewport.width += int_adj;
+ *init = dc_fixpt_add(*init, dc_fixpt_mul_int(ratio, recout_skip));
+ int_part = dc_fixpt_floor(*init) - *vp_offset;
+ if (int_part < taps) {
+ int int_adj = *vp_offset >= (taps - int_part) ?
+ (taps - int_part) : *vp_offset;
+ *vp_offset -= int_adj;
+ *vp_size += int_adj;
int_part += int_adj;
- } else if (int_part > data->taps.h_taps) {
- data->viewport.x += int_part - data->taps.h_taps;
- data->viewport.width -= int_part - data->taps.h_taps;
- int_part = data->taps.h_taps;
+ } else if (int_part > taps) {
+ *vp_offset += int_part - taps;
+ *vp_size -= int_part - taps;
+ int_part = taps;
}
- data->inits.h.value &= 0xffffffff;
- data->inits.h = dc_fixpt_add_int(data->inits.h, int_part);
- }
-
- if (data->viewport_c.x) {
- int int_part;
-
- data->inits.h_c = dc_fixpt_add(data->inits.h_c, dc_fixpt_mul_int(
- data->ratios.horz_c, data->recout.x - recout_full->x));
- int_part = dc_fixpt_floor(data->inits.h_c) - data->viewport_c.x;
- if (int_part < data->taps.h_taps_c) {
- int int_adj = data->viewport_c.x >= (data->taps.h_taps_c - int_part) ?
- (data->taps.h_taps_c - int_part) : data->viewport_c.x;
- data->viewport_c.x -= int_adj;
- data->viewport_c.width += int_adj;
- int_part += int_adj;
- } else if (int_part > data->taps.h_taps_c) {
- data->viewport_c.x += int_part - data->taps.h_taps_c;
- data->viewport_c.width -= int_part - data->taps.h_taps_c;
- int_part = data->taps.h_taps_c;
- }
- data->inits.h_c.value &= 0xffffffff;
- data->inits.h_c = dc_fixpt_add_int(data->inits.h_c, int_part);
+ init->value &= 0xffffffff;
+ *init = dc_fixpt_add_int(*init, int_part);
}
} else {
/* Adjust for non-0 viewport offset */
- if (data->viewport.x) {
- int int_part = dc_fixpt_floor(
- dc_fixpt_sub(data->inits.h, data->ratios.horz));
-
- int_part = int_part > 0 ? int_part : 0;
- data->viewport.width += int_part < data->viewport.x ? int_part : data->viewport.x;
- data->viewport.x -= int_part < data->viewport.x ? int_part : data->viewport.x;
- }
- if (data->viewport_c.x) {
- int int_part = dc_fixpt_floor(
- dc_fixpt_sub(data->inits.h_c, data->ratios.horz_c));
+ if (*vp_offset) {
+ int int_part = dc_fixpt_floor(dc_fixpt_sub(*init, ratio));
int_part = int_part > 0 ? int_part : 0;
- data->viewport_c.width += int_part < data->viewport_c.x ? int_part : data->viewport_c.x;
- data->viewport_c.x -= int_part < data->viewport_c.x ? int_part : data->viewport_c.x;
+ *vp_size += int_part < *vp_offset ? int_part : *vp_offset;
+ *vp_offset -= int_part < *vp_offset ? int_part : *vp_offset;
}
/* Adjust for viewport end clip-off */
- if ((data->viewport.x + data->viewport.width) < (src.x + src.width)) {
+ if ((*vp_offset + *vp_size) < src_size) {
int int_part;
- int end_offset = src.x + src.width
- - data->viewport.x - data->viewport.width;
+ int end_offset = src_size - *vp_offset - *vp_size;
/*
* this is init if vp had no offset, keep in mind this is from the
* right side of vp due to scan direction
*/
- data->inits.h = dc_fixpt_add(data->inits.h, dc_fixpt_mul_int(
- data->ratios.horz, data->recout.x - recout_full->x));
+ *init = dc_fixpt_add(*init, dc_fixpt_mul_int(ratio, recout_skip));
/*
* this is the difference between first pixel of viewport available to read
* and init position, takning into account scan direction
*/
- int_part = dc_fixpt_floor(data->inits.h) - end_offset;
- if (int_part < data->taps.h_taps) {
- int int_adj = end_offset >= (data->taps.h_taps - int_part) ?
- (data->taps.h_taps - int_part) : end_offset;
- data->viewport.width += int_adj;
+ int_part = dc_fixpt_floor(*init) - end_offset;
+ if (int_part < taps) {
+ int int_adj = end_offset >= (taps - int_part) ?
+ (taps - int_part) : end_offset;
+ *vp_size += int_adj;
int_part += int_adj;
- } else if (int_part > data->taps.h_taps) {
- data->viewport.width += int_part - data->taps.h_taps;
- int_part = data->taps.h_taps;
+ } else if (int_part > taps) {
+ *vp_size += int_part - taps;
+ int_part = taps;
}
- data->inits.h.value &= 0xffffffff;
- data->inits.h = dc_fixpt_add_int(data->inits.h, int_part);
+ init->value &= 0xffffffff;
+ *init = dc_fixpt_add_int(*init, int_part);
}
-
- if ((data->viewport_c.x + data->viewport_c.width) < (src.x + src.width) / vpc_div) {
- int int_part;
- int end_offset = (src.x + src.width) / vpc_div
- - data->viewport_c.x - data->viewport_c.width;
-
- /*
- * this is init if vp had no offset, keep in mind this is from the
- * right side of vp due to scan direction
- */
- data->inits.h_c = dc_fixpt_add(data->inits.h_c, dc_fixpt_mul_int(
- data->ratios.horz_c, data->recout.x - recout_full->x));
- /*
- * this is the difference between first pixel of viewport available to read
- * and init position, takning into account scan direction
- */
- int_part = dc_fixpt_floor(data->inits.h_c) - end_offset;
- if (int_part < data->taps.h_taps_c) {
- int int_adj = end_offset >= (data->taps.h_taps_c - int_part) ?
- (data->taps.h_taps_c - int_part) : end_offset;
- data->viewport_c.width += int_adj;
- int_part += int_adj;
- } else if (int_part > data->taps.h_taps_c) {
- data->viewport_c.width += int_part - data->taps.h_taps_c;
- int_part = data->taps.h_taps_c;
- }
- data->inits.h_c.value &= 0xffffffff;
- data->inits.h_c = dc_fixpt_add_int(data->inits.h_c, int_part);
- }
-
}
- if (!flip_vert_scan_dir) {
- /* Adjust for viewport end clip-off */
- if ((data->viewport.y + data->viewport.height) < (src.y + src.height)) {
- int vp_clip = src.y + src.height - data->viewport.height - data->viewport.y;
- int int_part = dc_fixpt_floor(
- dc_fixpt_sub(data->inits.v, data->ratios.vert));
-
- int_part = int_part > 0 ? int_part : 0;
- data->viewport.height += int_part < vp_clip ? int_part : vp_clip;
- }
- if ((data->viewport_c.y + data->viewport_c.height) < (src.y + src.height) / vpc_div) {
- int vp_clip = (src.y + src.height) / vpc_div -
- data->viewport_c.height - data->viewport_c.y;
- int int_part = dc_fixpt_floor(
- dc_fixpt_sub(data->inits.v_c, data->ratios.vert_c));
-
- int_part = int_part > 0 ? int_part : 0;
- data->viewport_c.height += int_part < vp_clip ? int_part : vp_clip;
- }
-
- /* Adjust for non-0 viewport offset */
- if (data->viewport.y) {
- int int_part;
-
- data->inits.v = dc_fixpt_add(data->inits.v, dc_fixpt_mul_int(
- data->ratios.vert, data->recout.y - recout_full->y));
- int_part = dc_fixpt_floor(data->inits.v) - data->viewport.y;
- if (int_part < data->taps.v_taps) {
- int int_adj = data->viewport.y >= (data->taps.v_taps - int_part) ?
- (data->taps.v_taps - int_part) : data->viewport.y;
- data->viewport.y -= int_adj;
- data->viewport.height += int_adj;
- int_part += int_adj;
- } else if (int_part > data->taps.v_taps) {
- data->viewport.y += int_part - data->taps.v_taps;
- data->viewport.height -= int_part - data->taps.v_taps;
- int_part = data->taps.v_taps;
- }
- data->inits.v.value &= 0xffffffff;
- data->inits.v = dc_fixpt_add_int(data->inits.v, int_part);
- }
-
- if (data->viewport_c.y) {
- int int_part;
+}
- data->inits.v_c = dc_fixpt_add(data->inits.v_c, dc_fixpt_mul_int(
- data->ratios.vert_c, data->recout.y - recout_full->y));
- int_part = dc_fixpt_floor(data->inits.v_c) - data->viewport_c.y;
- if (int_part < data->taps.v_taps_c) {
- int int_adj = data->viewport_c.y >= (data->taps.v_taps_c - int_part) ?
- (data->taps.v_taps_c - int_part) : data->viewport_c.y;
- data->viewport_c.y -= int_adj;
- data->viewport_c.height += int_adj;
- int_part += int_adj;
- } else if (int_part > data->taps.v_taps_c) {
- data->viewport_c.y += int_part - data->taps.v_taps_c;
- data->viewport_c.height -= int_part - data->taps.v_taps_c;
- int_part = data->taps.v_taps_c;
- }
- data->inits.v_c.value &= 0xffffffff;
- data->inits.v_c = dc_fixpt_add_int(data->inits.v_c, int_part);
- }
- } else {
- /* Adjust for non-0 viewport offset */
- if (data->viewport.y) {
- int int_part = dc_fixpt_floor(
- dc_fixpt_sub(data->inits.v, data->ratios.vert));
+static void calculate_inits_and_adj_vp(struct pipe_ctx *pipe_ctx)
+{
+ const struct dc_plane_state *plane_state = pipe_ctx->plane_state;
+ const struct dc_stream_state *stream = pipe_ctx->stream;
+ struct scaler_data *data = &pipe_ctx->plane_res.scl_data;
+ struct rect src = pipe_ctx->plane_state->src_rect;
+ int recout_skip_h, recout_skip_v, surf_size_h, surf_size_v;
+ int vpc_div = (data->format == PIXEL_FORMAT_420BPP8
+ || data->format == PIXEL_FORMAT_420BPP10) ? 2 : 1;
+ bool orthogonal_rotation, flip_vert_scan_dir, flip_horz_scan_dir;
- int_part = int_part > 0 ? int_part : 0;
- data->viewport.height += int_part < data->viewport.y ? int_part : data->viewport.y;
- data->viewport.y -= int_part < data->viewport.y ? int_part : data->viewport.y;
- }
- if (data->viewport_c.y) {
- int int_part = dc_fixpt_floor(
- dc_fixpt_sub(data->inits.v_c, data->ratios.vert_c));
+ /*
+ * Need to calculate the scan direction for viewport to make adjustments
+ */
+ get_vp_scan_direction(
+ plane_state->rotation,
+ plane_state->horizontal_mirror,
+ &orthogonal_rotation,
+ &flip_vert_scan_dir,
+ &flip_horz_scan_dir);
+
+ /* Calculate src rect rotation adjusted to recout space */
+ surf_size_h = src.x + src.width;
+ surf_size_v = src.y + src.height;
+ if (flip_horz_scan_dir)
+ src.x = 0;
+ if (flip_vert_scan_dir)
+ src.y = 0;
+ if (orthogonal_rotation) {
+ swap(src.x, src.y);
+ swap(src.width, src.height);
+ }
- int_part = int_part > 0 ? int_part : 0;
- data->viewport_c.height += int_part < data->viewport_c.y ? int_part : data->viewport_c.y;
- data->viewport_c.y -= int_part < data->viewport_c.y ? int_part : data->viewport_c.y;
- }
+ /* Recout matching initial vp offset = recout_offset - (stream dst offset +
+ * ((surf dst offset - stream src offset) * 1/ stream scaling ratio)
+ * - (surf surf_src offset * 1/ full scl ratio))
+ */
+ recout_skip_h = data->recout.x - (stream->dst.x + (plane_state->dst_rect.x - stream->src.x)
+ * stream->dst.width / stream->src.width -
+ src.x * plane_state->dst_rect.width / src.width
+ * stream->dst.width / stream->src.width);
+ recout_skip_v = data->recout.y - (stream->dst.y + (plane_state->dst_rect.y - stream->src.y)
+ * stream->dst.height / stream->src.height -
+ src.y * plane_state->dst_rect.height / src.height
+ * stream->dst.height / stream->src.height);
+ if (orthogonal_rotation)
+ swap(recout_skip_h, recout_skip_v);
+ /*
+ * Init calculated according to formula:
+ * init = (scaling_ratio + number_of_taps + 1) / 2
+ * init_bot = init + scaling_ratio
+ * init_c = init + truncated_vp_c_offset(from calculate viewport)
+ */
+ data->inits.h = dc_fixpt_truncate(dc_fixpt_div_int(
+ dc_fixpt_add_int(data->ratios.horz, data->taps.h_taps + 1), 2), 19);
- /* Adjust for viewport end clip-off */
- if ((data->viewport.y + data->viewport.height) < (src.y + src.height)) {
- int int_part;
- int end_offset = src.y + src.height
- - data->viewport.y - data->viewport.height;
+ data->inits.h_c = dc_fixpt_truncate(dc_fixpt_add(data->inits.h_c, dc_fixpt_div_int(
+ dc_fixpt_add_int(data->ratios.horz_c, data->taps.h_taps_c + 1), 2)), 19);
- /*
- * this is init if vp had no offset, keep in mind this is from the
- * right side of vp due to scan direction
- */
- data->inits.v = dc_fixpt_add(data->inits.v, dc_fixpt_mul_int(
- data->ratios.vert, data->recout.y - recout_full->y));
- /*
- * this is the difference between first pixel of viewport available to read
- * and init position, taking into account scan direction
- */
- int_part = dc_fixpt_floor(data->inits.v) - end_offset;
- if (int_part < data->taps.v_taps) {
- int int_adj = end_offset >= (data->taps.v_taps - int_part) ?
- (data->taps.v_taps - int_part) : end_offset;
- data->viewport.height += int_adj;
- int_part += int_adj;
- } else if (int_part > data->taps.v_taps) {
- data->viewport.height += int_part - data->taps.v_taps;
- int_part = data->taps.v_taps;
- }
- data->inits.v.value &= 0xffffffff;
- data->inits.v = dc_fixpt_add_int(data->inits.v, int_part);
- }
+ data->inits.v = dc_fixpt_truncate(dc_fixpt_div_int(
+ dc_fixpt_add_int(data->ratios.vert, data->taps.v_taps + 1), 2), 19);
- if ((data->viewport_c.y + data->viewport_c.height) < (src.y + src.height) / vpc_div) {
- int int_part;
- int end_offset = (src.y + src.height) / vpc_div
- - data->viewport_c.y - data->viewport_c.height;
+ data->inits.v_c = dc_fixpt_truncate(dc_fixpt_add(data->inits.v_c, dc_fixpt_div_int(
+ dc_fixpt_add_int(data->ratios.vert_c, data->taps.v_taps_c + 1), 2)), 19);
- /*
- * this is init if vp had no offset, keep in mind this is from the
- * right side of vp due to scan direction
- */
- data->inits.v_c = dc_fixpt_add(data->inits.v_c, dc_fixpt_mul_int(
- data->ratios.vert_c, data->recout.y - recout_full->y));
- /*
- * this is the difference between first pixel of viewport available to read
- * and init position, taking into account scan direction
- */
- int_part = dc_fixpt_floor(data->inits.v_c) - end_offset;
- if (int_part < data->taps.v_taps_c) {
- int int_adj = end_offset >= (data->taps.v_taps_c - int_part) ?
- (data->taps.v_taps_c - int_part) : end_offset;
- data->viewport_c.height += int_adj;
- int_part += int_adj;
- } else if (int_part > data->taps.v_taps_c) {
- data->viewport_c.height += int_part - data->taps.v_taps_c;
- int_part = data->taps.v_taps_c;
- }
- data->inits.v_c.value &= 0xffffffff;
- data->inits.v_c = dc_fixpt_add_int(data->inits.v_c, int_part);
- }
- }
+ /*
+ * Taps, inits and scaling ratios are in recout space need to rotate
+ * to viewport rotation before adjustment
+ */
+ adjust_vp_and_init_for_seamless_clip(
+ flip_horz_scan_dir,
+ recout_skip_h,
+ surf_size_h,
+ orthogonal_rotation ? data->taps.v_taps : data->taps.h_taps,
+ orthogonal_rotation ? data->ratios.vert : data->ratios.horz,
+ orthogonal_rotation ? &data->inits.v : &data->inits.h,
+ &data->viewport.x,
+ &data->viewport.width);
+ adjust_vp_and_init_for_seamless_clip(
+ flip_horz_scan_dir,
+ recout_skip_h,
+ surf_size_h / vpc_div,
+ orthogonal_rotation ? data->taps.v_taps_c : data->taps.h_taps_c,
+ orthogonal_rotation ? data->ratios.vert_c : data->ratios.horz_c,
+ orthogonal_rotation ? &data->inits.v_c : &data->inits.h_c,
+ &data->viewport_c.x,
+ &data->viewport_c.width);
+ adjust_vp_and_init_for_seamless_clip(
+ flip_vert_scan_dir,
+ recout_skip_v,
+ surf_size_v,
+ orthogonal_rotation ? data->taps.h_taps : data->taps.v_taps,
+ orthogonal_rotation ? data->ratios.horz : data->ratios.vert,
+ orthogonal_rotation ? &data->inits.h : &data->inits.v,
+ &data->viewport.y,
+ &data->viewport.height);
+ adjust_vp_and_init_for_seamless_clip(
+ flip_vert_scan_dir,
+ recout_skip_v,
+ surf_size_v / vpc_div,
+ orthogonal_rotation ? data->taps.h_taps_c : data->taps.v_taps_c,
+ orthogonal_rotation ? data->ratios.horz_c : data->ratios.vert_c,
+ orthogonal_rotation ? &data->inits.h_c : &data->inits.v_c,
+ &data->viewport_c.y,
+ &data->viewport_c.height);
/* Interlaced inits based on final vert inits */
data->inits.v_bot = dc_fixpt_add(data->inits.v, data->ratios.vert);
data->inits.v_c_bot = dc_fixpt_add(data->inits.v_c, data->ratios.vert_c);
- if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_90 ||
- pipe_ctx->plane_state->rotation == ROTATION_ANGLE_270) {
- rect_swap_helper(&data->viewport_c);
- rect_swap_helper(&data->viewport);
- }
}
bool resource_build_scaling_params(struct pipe_ctx *pipe_ctx)
{
const struct dc_plane_state *plane_state = pipe_ctx->plane_state;
struct dc_crtc_timing *timing = &pipe_ctx->stream->timing;
- struct rect recout_full = { 0 };
bool res = false;
DC_LOGGER_INIT(pipe_ctx->stream->ctx->logger);
/* Important: scaling ratio calculation requires pixel format,
if (pipe_ctx->plane_res.scl_data.viewport.height < 16 || pipe_ctx->plane_res.scl_data.viewport.width < 16)
return false;
- calculate_recout(pipe_ctx, &recout_full);
+ calculate_recout(pipe_ctx);
/**
* Setting line buffer pixel depth to 24bpp yields banding
if (res)
/* May need to re-check lb size after this in some obscure scenario */
- calculate_inits_and_adj_vp(pipe_ctx, &recout_full);
+ calculate_inits_and_adj_vp(pipe_ctx);
DC_LOG_SCALER(
"%s: Viewport:\nheight:%d width:%d x:%d "
OSDN Git Service
