#define ATEN2011_MSR_CD 0x80 /* Current state of CD */
-/* 1: Enables the debugging -- 0: Disable the debugging */
-#define ATEN_DEBUG 0
-
-#ifdef ATEN_DEBUG
-static int debug = 0;
-#define DPRINTK(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ## args)
-
-#else
-static int debug = 0;
-#define DPRINTK(fmt, args...)
-
-#endif
+static int debug;
/*
* Version Information
struct usb_device *dev = port->serial->dev;
val = val & 0x00ff;
- dbg("%s: is %x, value %x\n", __func__, reg, val);
+ dbg("%s: is %x, value %x", __func__, reg, val);
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ,
ATEN_WR_RTYPE, val, reg, NULL, 0,
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ,
ATEN_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
ATEN_WDR_TIMEOUT);
- dbg("%s: offset is %x, return val %x\n", __func__, reg, *val);
+ dbg("%s: offset is %x, return val %x", __func__, reg, *val);
*val = (*val) & 0x00ff;
return ret;
}
else
val |= (((__u16)port->number - minor) + 2) << 8;
}
- dbg("%s: application number is %x\n", __func__, val);
+ dbg("%s: application number is %x", __func__, val);
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ,
ATEN_WR_RTYPE, val, reg, NULL, 0,
else
wval = (((__u16) port->number - minor) + 2) << 8;
}
- dbg("%s: application number is %x\n", __func__, wval);
+ dbg("%s: application number is %x", __func__, wval);
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ,
ATEN_RD_RTYPE, wval, reg, val, VENDOR_READ_LENGTH,
ATEN_WDR_TIMEOUT);
struct ATENINTL_port *ATEN2011_port;
__u8 regval = 0x0;
- if (!urb) {
- DPRINTK("%s", "Invalid Pointer !!!!:\n");
- return;
- }
-
switch (urb->status) {
case 0:
/* success */
ATEN2011_port = (struct ATENINTL_port *)urb->context;
- DPRINTK("%s urb buffer size is %d\n", __FUNCTION__, urb->actual_length);
- DPRINTK("%s ATEN2011_port->MsrLsr is %d port %d\n", __FUNCTION__,
+ dbg("%s urb buffer size is %d", __FUNCTION__, urb->actual_length);
+ dbg("%s ATEN2011_port->MsrLsr is %d port %d", __FUNCTION__,
ATEN2011_port->MsrLsr, ATEN2011_port->port_num);
data = urb->transfer_buffer;
regval = (__u8) data[0];
- DPRINTK("%s data is %x\n", __FUNCTION__, regval);
+ dbg("%s data is %x", __FUNCTION__, regval);
if (ATEN2011_port->MsrLsr == 0)
handle_newMsr(ATEN2011_port, regval);
else if (ATEN2011_port->MsrLsr == 1)
__u16 wval;
int minor;
- DPRINTK("%s", " : Entering\n");
+ dbg("%s", " : Entering");
ATEN2011_serial = (struct ATENINTL_serial *)urb->context;
- if (!urb) {
- DPRINTK("%s", "Invalid Pointer !!!!:\n");
- return;
- }
switch (urb->status) {
case 0:
* Byte 5 FIFO status for both */
if (length && length > 5) {
- DPRINTK("%s \n", "Wrong data !!!");
+ dbg("%s", "Wrong data !!!");
return;
}
(__u16) (minor)) + 1) << 8;
if (ATEN2011_port->open != 0) {
if (sp[i] & 0x01) {
- DPRINTK("SP%d No Interrupt !!!\n", i);
+ dbg("SP%d No Interrupt !!!", i);
} else {
switch (sp[i] & 0x0f) {
case SERIAL_IIR_RLS:
- DPRINTK
- ("Serial Port %d: Receiver status error or ",
- i);
- DPRINTK
- ("address bit detected in 9-bit mode\n");
+ dbg("Serial Port %d: Receiver status error or address bit detected in 9-bit mode", i);
ATEN2011_port->MsrLsr = 1;
ATEN2011_get_reg(ATEN2011_port, wval,
LINE_STATUS_REGISTER,
&Data);
break;
case SERIAL_IIR_MS:
- DPRINTK
- ("Serial Port %d: Modem status change\n",
- i);
+ dbg("Serial Port %d: Modem status change", i);
ATEN2011_port->MsrLsr = 0;
ATEN2011_get_reg(ATEN2011_port, wval,
MODEM_STATUS_REGISTER,
struct ATENINTL_serial *ATEN2011_serial;
struct ATENINTL_port *ATEN2011_port;
struct tty_struct *tty;
- if (!urb) {
- DPRINTK("%s", "Invalid Pointer !!!!:\n");
- return;
- }
if (urb->status) {
- DPRINTK("nonzero read bulk status received: %d", urb->status);
+ dbg("nonzero read bulk status received: %d", urb->status);
return;
}
ATEN2011_port = (struct ATENINTL_port *)urb->context;
- if (!ATEN2011_port) {
- DPRINTK("%s", "NULL ATEN2011_port pointer \n");
- return;
- }
port = (struct usb_serial_port *)ATEN2011_port->port;
serial = port->serial;
- DPRINTK("%s\n", "Entering... \n");
+ dbg("%s", "Entering...");
data = urb->transfer_buffer;
ATEN2011_serial = usb_get_serial_data(serial);
- DPRINTK("%s", "Entering ........... \n");
-
if (urb->actual_length) {
tty = tty_port_tty_get(&ATEN2011_port->port->port);
if (tty) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
- DPRINTK(" %s \n", data);
tty_flip_buffer_push(tty);
tty_kref_put(tty);
}
ATEN2011_port->icount.rx += urb->actual_length;
- DPRINTK("ATEN2011_port->icount.rx is %d:\n",
+ dbg("ATEN2011_port->icount.rx is %d:",
ATEN2011_port->icount.rx);
}
if (!ATEN2011_port->read_urb) {
- DPRINTK("%s", "URB KILLED !!!\n");
+ dbg("%s", "URB KILLED !!!");
return;
}
status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
if (status) {
- DPRINTK
- (" usb_submit_urb(read bulk) failed, status = %d",
- status);
+ dbg("usb_submit_urb(read bulk) failed, status = %d", status);
}
}
}
{
struct ATENINTL_port *ATEN2011_port;
struct tty_struct *tty;
- if (!urb) {
- DPRINTK("%s", "Invalid Pointer !!!!:\n");
- return;
- }
if (urb->status) {
- DPRINTK("nonzero write bulk status received:%d\n", urb->status);
+ dbg("nonzero write bulk status received:%d", urb->status);
return;
}
ATEN2011_port = (struct ATENINTL_port *)urb->context;
- if (!ATEN2011_port) {
- DPRINTK("%s", "NULL ATEN2011_port pointer \n");
- return;
- }
- DPRINTK("%s \n", "Entering .........");
+ dbg("%s", "Entering .........");
tty = tty_port_tty_get(&ATEN2011_port->port->port);
Data = 0x0;
status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
if (status < 0) {
- DPRINTK("Reading Spreg failed\n");
+ dbg("Reading Spreg failed");
return -1;
}
Data |= 0x80;
status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
if (status < 0) {
- DPRINTK("writing Spreg failed\n");
+ dbg("writing Spreg failed");
return -1;
}
Data &= ~0x80;
status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
if (status < 0) {
- DPRINTK("writing Spreg failed\n");
+ dbg("writing Spreg failed");
return -1;
}
Data = 0x00;
status = set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
if (status < 0) {
- DPRINTK("Writing SCRATCH_PAD_REGISTER failed status-0x%x\n",
- status);
+ dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x", status);
return -1;
} else
- DPRINTK("SCRATCH_PAD_REGISTER Writing success status%d\n",
- status);
+ dbg("SCRATCH_PAD_REGISTER Writing success status%d", status);
/**************************CHECK***************************/
Data = 0x0;
status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
if (status < 0) {
- DPRINTK("Reading Controlreg failed\n");
+ dbg("Reading Controlreg failed");
return -1;
}
Data |= 0x08; /* Driver done bit */
status =
set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
if (status < 0) {
- DPRINTK("writing Controlreg failed\n");
+ dbg("writing Controlreg failed");
return -1;
}
/*
Data = 0x00;
status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
if (status < 0) {
- DPRINTK("disableing interrupts failed\n");
+ dbg("disableing interrupts failed");
return -1;
}
/* Set FIFO_CONTROL_REGISTER to the default value */
Data = 0x00;
status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
- DPRINTK("Writing FIFO_CONTROL_REGISTER failed\n");
+ dbg("Writing FIFO_CONTROL_REGISTER failed");
return -1;
}
Data = 0xcf; /* chk */
status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
- DPRINTK("Writing FIFO_CONTROL_REGISTER failed\n");
+ dbg("Writing FIFO_CONTROL_REGISTER failed");
return -1;
}
if (tty)
tty->low_latency = 1;
-/*
- printk("port number is %d \n",port->number);
- printk("serial number is %d \n",port->serial->minor);
- printk("Bulkin endpoint is %d \n",port->bulk_in_endpointAddress);
- printk("BulkOut endpoint is %d \n",port->bulk_out_endpointAddress);
- printk("Interrupt endpoint is %d \n",port->interrupt_in_endpointAddress);
- printk("port's number in the device is %d\n",ATEN2011_port->port_num);
-*/
/*
* Check to see if we've set up our endpoint info yet
* (can't set it up in ATEN2011_startup as the structures
usb_submit_urb(ATEN2011_serial->interrupt_read_urb,
GFP_KERNEL);
if (response) {
- DPRINTK("%s - Error %d submitting interrupt urb",
+ dbg("%s - Error %d submitting interrupt urb",
__FUNCTION__, response);
}
* structures were not set up at that time.)
*/
- DPRINTK("port number is %d \n", port->number);
- DPRINTK("serial number is %d \n", port->serial->minor);
- DPRINTK("Bulkin endpoint is %d \n", port->bulk_in_endpointAddress);
- DPRINTK("BulkOut endpoint is %d \n", port->bulk_out_endpointAddress);
- DPRINTK("Interrupt endpoint is %d \n",
+ dbg("port number is %d", port->number);
+ dbg("serial number is %d", port->serial->minor);
+ dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress);
+ dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress);
+ dbg("Interrupt endpoint is %d",
port->interrupt_in_endpointAddress);
- DPRINTK("port's number in the device is %d\n", ATEN2011_port->port_num);
+ dbg("port's number in the device is %d", ATEN2011_port->port_num);
ATEN2011_port->bulk_in_buffer = port->bulk_in_buffer;
ATEN2011_port->bulk_in_endpoint = port->bulk_in_endpointAddress;
ATEN2011_port->read_urb = port->read_urb;
transfer_buffer_length,
ATEN2011_bulk_in_callback, ATEN2011_port);
- DPRINTK("ATEN2011_open: bulkin endpoint is %d\n",
+ dbg("ATEN2011_open: bulkin endpoint is %d",
port->bulk_in_endpointAddress);
response = usb_submit_urb(ATEN2011_port->read_urb, GFP_KERNEL);
if (response) {
ATEN2011_port->icount.tx = 0;
ATEN2011_port->icount.rx = 0;
- DPRINTK
- ("\n\nusb_serial serial:%x ATEN2011_port:%x\nATEN2011_serial:%x usb_serial_port port:%x\n\n",
+ dbg("usb_serial serial:%x ATEN2011_port:%x\nATEN2011_serial:%x usb_serial_port port:%x",
(unsigned int)serial, (unsigned int)ATEN2011_port,
(unsigned int)ATEN2011_serial, (unsigned int)port);
int chars = 0;
struct ATENINTL_port *ATEN2011_port;
- /* DPRINTK("%s \n"," ATEN2011_chars_in_buffer:entering ..........."); */
+ /* dbg("%s"," ATEN2011_chars_in_buffer:entering ..........."); */
ATEN2011_port = usb_get_serial_port_data(port);
if (ATEN2011_port == NULL) {
- DPRINTK("%s \n", "ATEN2011_break:leaving ...........");
+ dbg("%s", "ATEN2011_break:leaving ...........");
return -1;
}
int no_urbs;
__u16 Data;
- DPRINTK("%s\n", "ATEN2011_close:entering...");
+ dbg("%s", "ATEN2011_close:entering...");
serial = port->serial;
/* take the Adpater and port's private data */
* and interrupt read if they exists */
if (serial->dev) {
if (ATEN2011_port->write_urb) {
- DPRINTK("%s", "Shutdown bulk write\n");
+ dbg("%s", "Shutdown bulk write");
usb_kill_urb(ATEN2011_port->write_urb);
}
if (ATEN2011_port->read_urb) {
- DPRINTK("%s", "Shutdown bulk read\n");
+ dbg("%s", "Shutdown bulk read");
usb_kill_urb(ATEN2011_port->read_urb);
}
if ((&ATEN2011_port->control_urb)) {
- DPRINTK("%s", "Shutdown control read\n");
+ dbg("%s", "Shutdown control read");
/* usb_kill_urb (ATEN2011_port->control_urb); */
}
/* kfree(ATEN2011_port->ctrl_buf); */
/* decrement the no.of open ports counter of an individual USB-serial adapter. */
ATEN2011_serial->NoOfOpenPorts--;
- DPRINTK("NoOfOpenPorts in close%d:in port%d\n",
+ dbg("NoOfOpenPorts in close%d:in port%d",
ATEN2011_serial->NoOfOpenPorts, port->number);
if (ATEN2011_serial->NoOfOpenPorts == 0) {
/* stop the stus polling here */
ATEN2011_serial->status_polling_started = 0;
if (ATEN2011_serial->interrupt_read_urb) {
- DPRINTK("%s", "Shutdown interrupt_read_urb\n");
+ dbg("%s", "Shutdown interrupt_read_urb");
/* ATEN2011_serial->interrupt_in_buffer=NULL; */
/* usb_kill_urb (ATEN2011_serial->interrupt_read_urb); */
}
set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
ATEN2011_port->open = 0;
- DPRINTK("%s \n", "Leaving ............");
+ dbg("%s", "Leaving ............");
}
struct ATENINTL_serial *ATEN2011_serial;
struct ATENINTL_port *ATEN2011_port;
- DPRINTK("%s \n", "Entering ...........");
- DPRINTK("ATEN2011_break: Start\n");
+ dbg("%s", "Entering ...........");
+ dbg("ATEN2011_break: Start");
serial = port->serial;
}
ATEN2011_port->shadowLCR = data;
- DPRINTK("ATEN2011_break ATEN2011_port->shadowLCR is %x\n",
+ dbg("ATEN2011_break ATEN2011_port->shadowLCR is %x",
ATEN2011_port->shadowLCR);
set_uart_reg(port, LINE_CONTROL_REGISTER, ATEN2011_port->shadowLCR);
ATEN2011_port = usb_get_serial_port_data(port);
if (ATEN2011_port == NULL) {
- DPRINTK("%s \n", "ATEN2011_break:leaving ...........");
+ dbg("%s", "ATEN2011_break:leaving ...........");
return -1;
}
struct urb *urb;
const unsigned char *current_position = data;
unsigned char *data1;
- DPRINTK("%s \n", "entering ...........");
+ dbg("%s", "entering ...........");
serial = port->serial;
ATEN2011_port = usb_get_serial_port_data(port);
if (ATEN2011_port == NULL) {
- DPRINTK("%s", "ATEN2011_port is NULL\n");
+ dbg("%s", "ATEN2011_port is NULL");
return -1;
}
ATEN2011_serial = usb_get_serial_data(serial);
if (ATEN2011_serial == NULL) {
- DPRINTK("%s", "ATEN2011_serial is NULL \n");
+ dbg("%s", "ATEN2011_serial is NULL");
return -1;
}
for (i = 0; i < NUM_URBS; ++i) {
if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS) {
urb = ATEN2011_port->write_urb_pool[i];
- DPRINTK("\nURB:%d", i);
+ dbg("URB:%d", i);
break;
}
}
ATEN2011_port);
data1 = urb->transfer_buffer;
- DPRINTK("\nbulkout endpoint is %d", port->bulk_out_endpointAddress);
+ dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
/* for(i=0;i < urb->actual_length;i++) */
- /* DPRINTK("Data is %c\n ",data1[i]); */
+ /* dbg("Data is %c ",data1[i]); */
/* send it down the pipe */
status = usb_submit_urb(urb, GFP_ATOMIC);
}
bytes_sent = transfer_size;
ATEN2011_port->icount.tx += transfer_size;
- DPRINTK("ATEN2011_port->icount.tx is %d:\n", ATEN2011_port->icount.tx);
+ dbg("ATEN2011_port->icount.tx is %d:", ATEN2011_port->icount.tx);
exit:
return bytes_sent;
struct ATENINTL_port *ATEN2011_port;
int status;
- DPRINTK("- port %d\n", port->number);
+ dbg("- port %d", port->number);
ATEN2011_port = usb_get_serial_port_data(port);
return;
if (!ATEN2011_port->open) {
- DPRINTK("%s\n", "port not opened");
+ dbg("%s", "port not opened");
return;
}
- DPRINTK("%s", "Entering .......... \n");
+ dbg("%s", "Entering .......... ");
if (!tty) {
dbg("%s - no tty available", __FUNCTION__);
return;
}
- DPRINTK("%s", "Entering .......... \n");
+ dbg("%s", "Entering .......... ");
if (!tty) {
dbg("%s - no tty available", __FUNCTION__);
int status = 0;
ATEN2011_port = usb_get_serial_port_data(port);
- DPRINTK("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __FUNCTION__, port->number);
if (ATEN2011_port == NULL)
return -ENODEV;
| ((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0)
| ((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0);
- DPRINTK("%s - 0x%04X", __FUNCTION__, result);
+ dbg("%s - 0x%04X", __FUNCTION__, result);
return result;
}
unsigned int mcr;
unsigned int status;
- DPRINTK("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __FUNCTION__, port->number);
ATEN2011_port = usb_get_serial_port_data(port);
status = set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
if (status < 0) {
- DPRINTK("setting MODEM_CONTROL_REGISTER Failed\n");
+ dbg("setting MODEM_CONTROL_REGISTER Failed");
return -1;
}
struct usb_serial *serial;
struct ATENINTL_port *ATEN2011_port;
- DPRINTK("ATEN2011_set_termios: START\n");
+ dbg("ATEN2011_set_termios: START");
serial = port->serial;
return;
}
- DPRINTK("%s\n", "setting termios - ");
+ dbg("%s", "setting termios - ");
cflag = tty->termios->c_cflag;
if (!cflag) {
- DPRINTK("%s %s\n", __FUNCTION__, "cflag is NULL");
+ dbg("%s %s", __FUNCTION__, "cflag is NULL");
return;
}
if ((cflag == old_termios->c_cflag) &&
(RELEVANT_IFLAG(tty->termios->c_iflag) ==
RELEVANT_IFLAG(old_termios->c_iflag))) {
- DPRINTK("%s\n", "Nothing to change");
+ dbg("%s", "Nothing to change");
return;
}
}
ATEN2011_change_port_settings(tty, ATEN2011_port, old_termios);
if (!ATEN2011_port->read_urb) {
- DPRINTK("%s", "URB KILLED !!!!!\n");
+ dbg("%s", "URB KILLED !!!!!");
return;
}
ATEN2011_port->read_urb->dev = serial->dev;
status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
if (status) {
- DPRINTK
+ dbg
(" usb_submit_urb(read bulk) failed, status = %d",
status);
}
Data = ATEN2011_port->shadowMCR;
status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
if (status < 0) {
- DPRINTK("setting MODEM_CONTROL_REGISTER Failed\n");
+ dbg("setting MODEM_CONTROL_REGISTER Failed");
return -1;
}
port = (struct usb_serial_port *)ATEN2011_port->port;
- DPRINTK("%s", "Entering .......... \n");
+ dbg("%s", "Entering .......... ");
minor = ATEN2011_port->port->serial->minor;
if (minor == SERIAL_TTY_NO_MINOR)
ATEN2011_port->shadowMCR = Data;
status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
if (status < 0) {
- DPRINTK("Writing spreg failed in set_serial_baud\n");
+ dbg("Writing spreg failed in set_serial_baud");
return -1;
}
#endif
ATEN2011_port->shadowMCR = Data;
status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
if (status < 0) {
- DPRINTK("Writing spreg failed in set_serial_baud\n");
+ dbg("Writing spreg failed in set_serial_baud");
return -1;
}
#endif
&clk_sel_val);
status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
if (status < 0) {
- DPRINTK("reading spreg failed in set_serial_baud\n");
+ dbg("reading spreg failed in set_serial_baud");
return -1;
}
Data = (Data & 0x8f) | clk_sel_val;
status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
if (status < 0) {
- DPRINTK("Writing spreg failed in set_serial_baud\n");
+ dbg("Writing spreg failed in set_serial_baud");
return -1;
}
/* Calculate the Divisor */
if (status) {
err("%s - bad baud rate", __FUNCTION__);
- DPRINTK("%s\n", "bad baud rate");
+ dbg("%s", "bad baud rate");
return status;
}
/* Enable access to divisor latch */
/* Write the divisor */
Data = (unsigned char)(divisor & 0xff);
- DPRINTK("set_serial_baud Value to write DLL is %x\n", Data);
+ dbg("set_serial_baud Value to write DLL is %x", Data);
set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
Data = (unsigned char)((divisor & 0xff00) >> 8);
- DPRINTK("set_serial_baud Value to write DLM is %x\n", Data);
+ dbg("set_serial_baud Value to write DLM is %x", Data);
set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
/* Disable access to divisor latch */
return;
}
- DPRINTK("%s", "Entering .......... \n");
+ dbg("%s", "Entering .......... ");
lData = LCR_BITS_8;
lStop = LCR_STOP_1;
~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
ATEN2011_port->shadowLCR |= (lData | lParity | lStop);
- DPRINTK
- ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is %x\n",
+ dbg
+ ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is %x",
ATEN2011_port->shadowLCR);
/* Disable Interrupts */
Data = 0x00;
if (!baud) {
/* pick a default, any default... */
- DPRINTK("%s\n", "Picked default baud...");
+ dbg("%s", "Picked default baud...");
baud = 9600;
}
status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
if (status) {
- DPRINTK
+ dbg
(" usb_submit_urb(read bulk) failed, status = %d",
status);
}
}
- DPRINTK
- ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is End %x\n",
+ dbg
+ ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is End %x",
ATEN2011_port->shadowLCR);
return;
int minor;
__u16 Data;
- DPRINTK("%s \n", " ATEN2011_startup :entering..........");
+ dbg("%s", " ATEN2011_startup :entering..........");
if (!serial) {
- DPRINTK("%s\n", "Invalid Handler");
+ dbg("%s", "Invalid Handler");
return -1;
}
dev = serial->dev;
- DPRINTK("%s\n", "Entering...");
+ dbg("%s", "Entering...");
/* create our private serial structure */
ATEN2011_serial = kzalloc(sizeof(struct ATENINTL_serial), GFP_KERNEL);
status = get_reg_sync(serial->port[i],
ATEN2011_port->ControlRegOffset, &Data);
if (status < 0) {
- DPRINTK("Reading ControlReg failed status-0x%x\n",
+ dbg("Reading ControlReg failed status-0x%x",
status);
break;
} else
- DPRINTK
- ("ControlReg Reading success val is %x, status%d\n",
+ dbg
+ ("ControlReg Reading success val is %x, status%d",
Data, status);
Data |= 0x08; /* setting driver done bit */
Data |= 0x04; /* sp1_bit to have cts change reflect in modem status reg */
status = set_reg_sync(serial->port[i],
ATEN2011_port->ControlRegOffset, Data);
if (status < 0) {
- DPRINTK
- ("Writing ControlReg failed(rx_disable) status-0x%x\n",
+ dbg
+ ("Writing ControlReg failed(rx_disable) status-0x%x",
status);
break;
} else
- DPRINTK
- ("ControlReg Writing success(rx_disable) status%d\n",
+ dbg
+ ("ControlReg Writing success(rx_disable) status%d",
status);
/*
(__u16)(ATEN2011_port->DcrRegOffset + 0),
Data);
if (status < 0) {
- DPRINTK("Writing DCR0 failed status-0x%x\n", status);
+ dbg("Writing DCR0 failed status-0x%x", status);
break;
} else
- DPRINTK("DCR0 Writing success status%d\n", status);
+ dbg("DCR0 Writing success status%d", status);
Data = 0x05;
status = set_reg_sync(serial->port[i],
(__u16)(ATEN2011_port->DcrRegOffset + 1),
Data);
if (status < 0) {
- DPRINTK("Writing DCR1 failed status-0x%x\n", status);
+ dbg("Writing DCR1 failed status-0x%x", status);
break;
} else
- DPRINTK("DCR1 Writing success status%d\n", status);
+ dbg("DCR1 Writing success status%d", status);
Data = 0x24;
status = set_reg_sync(serial->port[i],
(__u16)(ATEN2011_port->DcrRegOffset + 2),
Data);
if (status < 0) {
- DPRINTK("Writing DCR2 failed status-0x%x\n", status);
+ dbg("Writing DCR2 failed status-0x%x", status);
break;
} else
- DPRINTK("DCR2 Writing success status%d\n", status);
+ dbg("DCR2 Writing success status%d", status);
/* write values in clkstart0x0 and clkmulti 0x20 */
Data = 0x0;
status = set_reg_sync(serial->port[i], CLK_START_VALUE_REGISTER,
Data);
if (status < 0) {
- DPRINTK
- ("Writing CLK_START_VALUE_REGISTER failed status-0x%x\n",
+ dbg
+ ("Writing CLK_START_VALUE_REGISTER failed status-0x%x",
status);
break;
} else
- DPRINTK
- ("CLK_START_VALUE_REGISTER Writing success status%d\n",
+ dbg
+ ("CLK_START_VALUE_REGISTER Writing success status%d",
status);
Data = 0x20;
status = set_reg_sync(serial->port[i], CLK_MULTI_REGISTER,
Data);
if (status < 0) {
- DPRINTK
- ("Writing CLK_MULTI_REGISTER failed status-0x%x\n",
+ dbg
+ ("Writing CLK_MULTI_REGISTER failed status-0x%x",
status);
break;
} else
- DPRINTK("CLK_MULTI_REGISTER Writing success status%d\n",
+ dbg("CLK_MULTI_REGISTER Writing success status%d",
status);
/* Zero Length flag register */
status = set_reg_sync(serial->port[i],
(__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num)),
Data);
- DPRINTK("ZLIP offset%x\n",
+ dbg("ZLIP offset%x",
(__u16) (ZLP_REG1 +
((__u16) ATEN2011_port->port_num)));
if (status < 0) {
- DPRINTK
- ("Writing ZLP_REG%d failed status-0x%x\n",
+ dbg
+ ("Writing ZLP_REG%d failed status-0x%x",
i + 2, status);
break;
} else
- DPRINTK("ZLP_REG%d Writing success status%d\n",
+ dbg("ZLP_REG%d Writing success status%d",
i + 2, status);
} else {
Data = 0xff;
status = set_reg_sync(serial->port[i],
(__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num) - 0x1),
Data);
- DPRINTK("ZLIP offset%x\n",
+ dbg("ZLIP offset%x",
(__u16) (ZLP_REG1 +
((__u16) ATEN2011_port->port_num) -
0x1));
if (status < 0) {
- DPRINTK
- ("Writing ZLP_REG%d failed status-0x%x\n",
+ dbg
+ ("Writing ZLP_REG%d failed status-0x%x",
i + 1, status);
break;
} else
- DPRINTK("ZLP_REG%d Writing success status%d\n",
+ dbg("ZLP_REG%d Writing success status%d",
i + 1, status);
}
Data = 0x0f;
status = set_reg_sync(serial->port[0], ZLP_REG5, Data);
if (status < 0) {
- DPRINTK("Writing ZLP_REG5 failed status-0x%x\n", status);
+ dbg("Writing ZLP_REG5 failed status-0x%x", status);
return -1;
} else
- DPRINTK("ZLP_REG5 Writing success status%d\n", status);
+ dbg("ZLP_REG5 Writing success status%d", status);
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
{
int i;
struct ATENINTL_port *ATEN2011_port;
- DPRINTK("%s \n", " shutdown :entering..........");
- if (!serial) {
- DPRINTK("%s", "Invalid Handler \n");
- return;
- }
-
- /* check for the ports to be closed,close the ports and disconnect */
+ /* check for the ports to be closed,close the ports and disconnect */
/* free private structure allocated for serial port *
* stop reads and writes on all ports */
kfree(usb_get_serial_data(serial));
usb_set_serial_data(serial, NULL);
-
- DPRINTK("%s\n", "Thank u :: ");
-
}
static struct usb_serial_driver aten_serial_driver = {
OSDN Git Service
