ARM: dts: sunxi: h3/h5: Fix GPIO regulator state array

Even though it translates to the same thing down to the binary level, we
should have an array of 2 number cells to describe each voltage state,
which in turns create a validation warning.

Let's fix this.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index 78a37a4..d277d04 100644 (file)
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -59,8 +59,7 @@
                gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
                enable-active-high;
                gpios-states = <0x1>;
-               states = <1100000 0x0
-                         1300000 0x1>;
+               states = <1100000 0>, <1300000 1>;
        };
 
        wifi_pwrseq: wifi_pwrseq {

diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index 4970eda..f19ed98 100644 (file)
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -102,8 +102,7 @@
                gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
                enable-active-high;
                gpios-states = <1>;
-               states = <1100000 0
-                         1300000 1>;
+               states = <1100000 0>, <1300000 1>;
        };
 
        wifi_pwrseq: wifi_pwrseq {

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 8408491..4759ba3 100644 (file)
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -109,8 +109,7 @@
                gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
                enable-active-high;
                gpios-states = <0x1>;
-               states = <1100000 0x0
-                         1300000 0x1>;
+               states = <1100000 0>, <1300000 1>;
        };
 };
 

diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
index 53edd1f..22466af 100644 (file)
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -21,8 +21,7 @@
                regulator-ramp-delay = <50>; /* 4ms */
                gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
                gpios-states = <0x1>;
-               states = <1100000 0x0
-                         1300000 0x1>;
+               states = <1100000 0>, <1300000 1>;
        };
 };
 

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
index 62409af..c924090 100644 (file)
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
@@ -55,8 +55,7 @@
                regulator-ramp-delay = <50>; /* 4ms */
                gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
                gpios-states = <0x1>;
-               states = <1100000 0x0
-                         1300000 0x1>;
+               states = <1100000 0>, <1300000 1>;
        };
 };
 

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
index 9887948..1c7dde8 100644 (file)
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
@@ -104,8 +104,7 @@
                regulator-ramp-delay = <50>; /* 4ms */
                gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
                gpios-states = <0x1>;
-               states = <1100000 0x0
-                         1300000 0x1>;
+               states = <1100000 0>, <1300000 1>;
        };
 
        wifi_pwrseq: wifi_pwrseq {