fbdev: sh_mobile_hdmi: Re-init regs before irq re-enable on resume

When the PM domain containing the HDMI hardware block is powered down,
the HDMI register values (incl. interrupt polarity settings) are lost.
During resume, after powering up the PM domain, interrupts are
re-enabled, and an interrupt storm happens due to incorrect interrupt
polarity settings:

    irq 163: nobody cared (try booting with the "irqpoll" option)
    ...
    Disabling IRQ #163

To fix this, re-initialize the interrupt polarity settings, and the
htop1 register block (if present), during resume.

As the .suspend_noirq() and .resume_noirq() callbacks are not called
when using the generic PM domain, the normal .resume() callback is used,
and the device interrupt needs to be disabled/enabled manually.

This fixes resume from s2ram with power down of the A4MP PM domain on
r8a7740/Armadillo.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

diff --git a/drivers/video/fbdev/sh_mobile_hdmi.c b/drivers/video/fbdev/sh_mobile_hdmi.c
index 9a33ee0..7c72a3f 100644 (file)
--- a/drivers/video/fbdev/sh_mobile_hdmi.c
+++ b/drivers/video/fbdev/sh_mobile_hdmi.c
@@ -281,6 +281,7 @@ struct sh_hdmi {
        u8 edid_block_addr;
        u8 edid_segment_nr;
        u8 edid_blocks;
+       int irq;
        struct clk *hdmi_clk;
        struct device *dev;
        struct delayed_work edid_work;
@@ -1299,6 +1300,7 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
        hdmi->dev = &pdev->dev;
        hdmi->entity.owner = THIS_MODULE;
        hdmi->entity.ops = &sh_hdmi_ops;
+       hdmi->irq = irq;
 
        hdmi->hdmi_clk = clk_get(&pdev->dev, "ick");
        if (IS_ERR(hdmi->hdmi_clk)) {
@@ -1415,12 +1417,11 @@ static int __exit sh_hdmi_remove(struct platform_device *pdev)
 {
        struct sh_hdmi *hdmi = entity_to_sh_hdmi(platform_get_drvdata(pdev));
        struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       int irq = platform_get_irq(pdev, 0);
 
        snd_soc_unregister_codec(&pdev->dev);
 
        /* No new work will be scheduled, wait for running ISR */
-       free_irq(irq, hdmi);
+       free_irq(hdmi->irq, hdmi);
        /* Wait for already scheduled work */
        cancel_delayed_work_sync(&hdmi->edid_work);
        pm_runtime_put(&pdev->dev);
@@ -1435,10 +1436,49 @@ static int __exit sh_hdmi_remove(struct platform_device *pdev)
        return 0;
 }
 
+static int sh_hdmi_suspend(struct device *dev)
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       struct sh_hdmi *hdmi = entity_to_sh_hdmi(platform_get_drvdata(pdev));
+
+       disable_irq(hdmi->irq);
+       /* Wait for already scheduled work */
+       cancel_delayed_work_sync(&hdmi->edid_work);
+       return 0;
+}
+
+static int sh_hdmi_resume(struct device *dev)
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       struct sh_mobile_hdmi_info *pdata = dev_get_platdata(dev);
+       struct sh_hdmi *hdmi = entity_to_sh_hdmi(platform_get_drvdata(pdev));
+
+       /* Re-init interrupt polarity */
+       if (pdata->flags & HDMI_OUTPUT_PUSH_PULL)
+               hdmi_bit_set(hdmi, 0x02, 0x02, HDMI_SYSTEM_CTRL);
+
+       if (pdata->flags & HDMI_OUTPUT_POLARITY_HI)
+               hdmi_bit_set(hdmi, 0x01, 0x01, HDMI_SYSTEM_CTRL);
+
+       /* Re-init htop1 */
+       if (hdmi->htop1)
+               sh_hdmi_htop1_init(hdmi);
+
+       /* Now it's safe to enable interrupts again */
+       enable_irq(hdmi->irq);
+       return 0;
+}
+
+static const struct dev_pm_ops sh_hdmi_pm_ops = {
+       .suspend        = sh_hdmi_suspend,
+       .resume         = sh_hdmi_resume,
+};
+
 static struct platform_driver sh_hdmi_driver = {
        .remove         = __exit_p(sh_hdmi_remove),
        .driver = {
                .name   = "sh-mobile-hdmi",
+               .pm     = &sh_hdmi_pm_ops,
        },
 };