ra_set_finalize(brw->wm.regs, NULL);
}
+int
+count_to_loop_end(fs_inst *do_inst)
+{
+ int depth = 1;
+ int ip = ip;
+ for (fs_inst *inst = (fs_inst *)do_inst->next;
+ depth > 0;
+ inst = (fs_inst *)inst->next) {
+ switch (inst->opcode) {
+ case BRW_OPCODE_DO:
+ depth++;
+ break;
+ case BRW_OPCODE_WHILE:
+ depth--;
+ break;
+ default:
+ break;
+ }
+ ip++;
+ }
+ return ip;
+}
+
/**
* Sets up interference between thread payload registers and the virtual GRFs
* to be allocated for program temporaries.
+ *
+ * We want to be able to reallocate the payload for our virtual GRFs, notably
+ * because the setup coefficients for a full set of 16 FS inputs takes up 8 of
+ * our 128 registers.
+ *
+ * The layout of the payload registers is:
+ *
+ * 0..nr_payload_regs-1: fixed function setup (including bary coordinates).
+ * nr_payload_regs..nr_payload_regs+curb_read_lengh-1: uniform data
+ * nr_payload_regs+curb_read_lengh..first_non_payload_grf-1: setup coefficients.
+ *
+ * And we have payload_node_count nodes covering these registers in order
+ * (note that in 16-wide, a node is two registers).
*/
-static void
-brw_setup_payload_interference(struct ra_graph *g,
- int payload_reg_count,
- int first_payload_node,
- int reg_node_count)
+void
+fs_visitor::setup_payload_interference(struct ra_graph *g,
+ int payload_node_count,
+ int first_payload_node)
{
- for (int i = 0; i < payload_reg_count; i++) {
- /* Mark each payload reg node as being allocated to its physical register.
+ int reg_width = c->dispatch_width / 8;
+ int loop_depth = 0;
+ int loop_end_ip = 0;
+
+ int payload_last_use_ip[payload_node_count];
+ memset(payload_last_use_ip, 0, sizeof(payload_last_use_ip));
+ int ip = 0;
+ foreach_list(node, &this->instructions) {
+ fs_inst *inst = (fs_inst *)node;
+
+ switch (inst->opcode) {
+ case BRW_OPCODE_DO:
+ loop_depth++;
+
+ /* Since payload regs are deffed only at the start of the shader
+ * execution, any uses of the payload within a loop mean the live
+ * interval extends to the end of the outermost loop. Find the ip of
+ * the end now.
+ */
+ if (loop_depth == 1)
+ loop_end_ip = ip + count_to_loop_end(inst);
+ break;
+ case BRW_OPCODE_WHILE:
+ loop_depth--;
+ break;
+ default:
+ break;
+ }
+
+ int use_ip;
+ if (loop_depth > 0)
+ use_ip = loop_end_ip;
+ else
+ use_ip = ip;
+
+ /* Note that UNIFORM args have been turned into FIXED_HW_REG by
+ * assign_curbe_setup(), and interpolation uses fixed hardware regs from
+ * the start (see interp_reg()).
+ */
+ for (int i = 0; i < 3; i++) {
+ if (inst->src[i].file == FIXED_HW_REG &&
+ inst->src[i].fixed_hw_reg.file == BRW_GENERAL_REGISTER_FILE) {
+ int node_nr = inst->src[i].fixed_hw_reg.nr / reg_width;
+ if (node_nr >= payload_node_count)
+ continue;
+
+ payload_last_use_ip[node_nr] = use_ip;
+ }
+ }
+
+ /* Special case instructions which have extra implied registers used. */
+ switch (inst->opcode) {
+ case FS_OPCODE_FB_WRITE:
+ /* We could omit this for the !inst->header_present case, except that
+ * the simulator apparently incorrectly reads from g0/g1 instead of
+ * sideband. It also really freaks out driver developers to see g0
+ * used in unusual places, so just always reserve it.
+ */
+ payload_last_use_ip[0 / reg_width] = use_ip;
+ payload_last_use_ip[1 / reg_width] = use_ip;
+ break;
+ case FS_OPCODE_DISCARD:
+ payload_last_use_ip[1 / reg_width] = use_ip;
+ break;
+
+ case FS_OPCODE_LINTERP:
+ /* On gen6+ in 16-wide, there are 4 adjacent registers (so 2 nodes)
+ * used by PLN's sourcing of the deltas, while we list only the first
+ * two in the arguments (1 node). Pre-gen6, the deltas are computed
+ * in normal VGRFs.
+ */
+ if (intel->gen >= 6) {
+ int delta_x_arg = 0;
+ if (inst->src[delta_x_arg].file == FIXED_HW_REG &&
+ inst->src[delta_x_arg].fixed_hw_reg.file ==
+ BRW_GENERAL_REGISTER_FILE) {
+ int sechalf_node = (inst->src[delta_x_arg].fixed_hw_reg.nr /
+ reg_width) + 1;
+ assert(sechalf_node < payload_node_count);
+ payload_last_use_ip[sechalf_node] = use_ip;
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ ip++;
+ }
+
+ for (int i = 0; i < payload_node_count; i++) {
+ /* Mark the payload node as interfering with any virtual grf that is
+ * live between the start of the program and our last use of the payload
+ * node.
+ */
+ for (int j = 0; j < this->virtual_grf_count; j++) {
+ if (this->virtual_grf_def[j] <= payload_last_use_ip[i] ||
+ this->virtual_grf_use[j] <= payload_last_use_ip[i]) {
+ ra_add_node_interference(g, first_payload_node + i, j);
+ }
+ }
+ }
+
+ for (int i = 0; i < payload_node_count; i++) {
+ /* Mark each payload node as being allocated to its physical register.
*
* The alternative would be to have per-physical-register classes, which
* would just be silly.
*/
ra_set_node_reg(g, first_payload_node + i, i);
-
- /* For now, just mark each payload node as interfering with every other
- * node to be allocated.
- */
- for (int j = 0; j < reg_node_count; j++) {
- ra_add_node_interference(g, first_payload_node + i, j);
- }
}
}
*/
int reg_width = c->dispatch_width / 8;
int hw_reg_mapping[this->virtual_grf_count];
- int payload_reg_count = (ALIGN(this->first_non_payload_grf, reg_width) /
+ int payload_node_count = (ALIGN(this->first_non_payload_grf, reg_width) /
reg_width);
int base_reg_count = max_grf / reg_width;
int node_count = this->virtual_grf_count;
int first_payload_node = node_count;
- node_count += payload_reg_count;
+ node_count += payload_node_count;
struct ra_graph *g = ra_alloc_interference_graph(brw->wm.regs, node_count);
for (int i = 0; i < this->virtual_grf_count; i++) {
}
}
- brw_setup_payload_interference(g, payload_reg_count, first_payload_node,
- this->virtual_grf_count);
+ setup_payload_interference(g, payload_node_count, first_payload_node);
if (!ra_allocate_no_spills(g)) {
/* Failed to allocate registers. Spill a reg, and the caller will
* regs in the register classes back down to real hardware reg
* numbers.
*/
- this->grf_used = payload_reg_count * reg_width;
+ this->grf_used = payload_node_count * reg_width;
for (int i = 0; i < this->virtual_grf_count; i++) {
int reg = ra_get_node_reg(g, i);
OSDN Git Service
