OSDN Git Service

pwm: add ep93xx PWM support
authorH Hartley Sweeten <hartleys@visionengravers.com>
Wed, 16 Oct 2013 01:40:03 +0000 (18:40 -0700)
committerThierry Reding <thierry.reding@gmail.com>
Thu, 17 Oct 2013 14:07:19 +0000 (16:07 +0200)
Remove the non-standard EP93xx PWM driver in drivers/misc and add
a new driver for the PWM controllers on the EP93xx platform based
on the PWM framework.

These PWM controllers each support 1 PWM channel with programmable
duty cycle, frequency, and polarity inversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
drivers/misc/Kconfig
drivers/misc/Makefile
drivers/misc/ep93xx_pwm.c [deleted file]
drivers/pwm/Kconfig
drivers/pwm/Makefile
drivers/pwm/pwm-ep93xx.c [new file with mode: 0644]

index 8dacd4c..c43c66a 100644 (file)
@@ -381,19 +381,6 @@ config HMC6352
          This driver provides support for the Honeywell HMC6352 compass,
          providing configuration and heading data via sysfs.
 
-config EP93XX_PWM
-       tristate "EP93xx PWM support"
-       depends on ARCH_EP93XX
-       help
-         This option enables device driver support for the PWM channels
-         on the Cirrus EP93xx processors.  The EP9307 chip only has one
-         PWM channel all the others have two, the second channel is an
-         alternate function of the EGPIO14 pin.  A sysfs interface is
-         provided to control the PWM channels.
-
-         To compile this driver as a module, choose M here: the module will
-         be called ep93xx_pwm.
-
 config DS1682
        tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
        depends on I2C
index c235d5b..ecccd00 100644 (file)
@@ -33,7 +33,6 @@ obj-$(CONFIG_APDS9802ALS)     += apds9802als.o
 obj-$(CONFIG_ISL29003)         += isl29003.o
 obj-$(CONFIG_ISL29020)         += isl29020.o
 obj-$(CONFIG_SENSORS_TSL2550)  += tsl2550.o
-obj-$(CONFIG_EP93XX_PWM)       += ep93xx_pwm.o
 obj-$(CONFIG_DS1682)           += ds1682.o
 obj-$(CONFIG_TI_DAC7512)       += ti_dac7512.o
 obj-$(CONFIG_C2PORT)           += c2port/
diff --git a/drivers/misc/ep93xx_pwm.c b/drivers/misc/ep93xx_pwm.c
deleted file mode 100644 (file)
index cdb67a9..0000000
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- *  Simple PWM driver for EP93XX
- *
- *     (c) Copyright 2009  Matthieu Crapet <mcrapet@gmail.com>
- *     (c) Copyright 2009  H Hartley Sweeten <hsweeten@visionengravers.com>
- *
- *     This program is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     as published by the Free Software Foundation; either version
- *     2 of the License, or (at your option) any later version.
- *
- *  EP9307 has only one channel:
- *    - PWMOUT
- *
- *  EP9301/02/12/15 have two channels:
- *    - PWMOUT
- *    - PWMOUT1 (alternate function for EGPIO14)
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/platform.h>
-
-#define EP93XX_PWMx_TERM_COUNT 0x00
-#define EP93XX_PWMx_DUTY_CYCLE 0x04
-#define EP93XX_PWMx_ENABLE     0x08
-#define EP93XX_PWMx_INVERT     0x0C
-
-#define EP93XX_PWM_MAX_COUNT   0xFFFF
-
-struct ep93xx_pwm {
-       void __iomem    *mmio_base;
-       struct clk      *clk;
-       u32             duty_percent;
-};
-
-/*
- * /sys/devices/platform/ep93xx-pwm.N
- *   /min_freq      read-only   minimum pwm output frequency
- *   /max_req       read-only   maximum pwm output frequency
- *   /freq          read-write  pwm output frequency (0 = disable output)
- *   /duty_percent  read-write  pwm duty cycle percent (1..99)
- *   /invert        read-write  invert pwm output
- */
-
-static ssize_t ep93xx_pwm_get_min_freq(struct device *dev,
-               struct device_attribute *attr, char *buf)
-{
-       struct platform_device *pdev = to_platform_device(dev);
-       struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
-       unsigned long rate = clk_get_rate(pwm->clk);
-
-       return sprintf(buf, "%ld\n", rate / (EP93XX_PWM_MAX_COUNT + 1));
-}
-
-static ssize_t ep93xx_pwm_get_max_freq(struct device *dev,
-               struct device_attribute *attr, char *buf)
-{
-       struct platform_device *pdev = to_platform_device(dev);
-       struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
-       unsigned long rate = clk_get_rate(pwm->clk);
-
-       return sprintf(buf, "%ld\n", rate / 2);
-}
-
-static ssize_t ep93xx_pwm_get_freq(struct device *dev,
-               struct device_attribute *attr, char *buf)
-{
-       struct platform_device *pdev = to_platform_device(dev);
-       struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
-
-       if (readl(pwm->mmio_base + EP93XX_PWMx_ENABLE) & 0x1) {
-               unsigned long rate = clk_get_rate(pwm->clk);
-               u16 term = readl(pwm->mmio_base + EP93XX_PWMx_TERM_COUNT);
-
-               return sprintf(buf, "%ld\n", rate / (term + 1));
-       } else {
-               return sprintf(buf, "disabled\n");
-       }
-}
-
-static ssize_t ep93xx_pwm_set_freq(struct device *dev,
-               struct device_attribute *attr, const char *buf, size_t count)
-{
-       struct platform_device *pdev = to_platform_device(dev);
-       struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
-       long val;
-       int err;
-
-       err = kstrtol(buf, 10, &val);
-       if (err)
-               return -EINVAL;
-
-       if (val == 0) {
-               writel(0x0, pwm->mmio_base + EP93XX_PWMx_ENABLE);
-       } else if (val <= (clk_get_rate(pwm->clk) / 2)) {
-               u32 term, duty;
-
-               val = (clk_get_rate(pwm->clk) / val) - 1;
-               if (val > EP93XX_PWM_MAX_COUNT)
-                       val = EP93XX_PWM_MAX_COUNT;
-               if (val < 1)
-                       val = 1;
-
-               term = readl(pwm->mmio_base + EP93XX_PWMx_TERM_COUNT);
-               duty = ((val + 1) * pwm->duty_percent / 100) - 1;
-
-               /* If pwm is running, order is important */
-               if (val > term) {
-                       writel(val, pwm->mmio_base + EP93XX_PWMx_TERM_COUNT);
-                       writel(duty, pwm->mmio_base + EP93XX_PWMx_DUTY_CYCLE);
-               } else {
-                       writel(duty, pwm->mmio_base + EP93XX_PWMx_DUTY_CYCLE);
-                       writel(val, pwm->mmio_base + EP93XX_PWMx_TERM_COUNT);
-               }
-
-               if (!readl(pwm->mmio_base + EP93XX_PWMx_ENABLE) & 0x1)
-                       writel(0x1, pwm->mmio_base + EP93XX_PWMx_ENABLE);
-       } else {
-               return -EINVAL;
-       }
-
-       return count;
-}
-
-static ssize_t ep93xx_pwm_get_duty_percent(struct device *dev,
-               struct device_attribute *attr, char *buf)
-{
-       struct platform_device *pdev = to_platform_device(dev);
-       struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
-
-       return sprintf(buf, "%d\n", pwm->duty_percent);
-}
-
-static ssize_t ep93xx_pwm_set_duty_percent(struct device *dev,
-               struct device_attribute *attr, const char *buf, size_t count)
-{
-       struct platform_device *pdev = to_platform_device(dev);
-       struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
-       long val;
-       int err;
-
-       err = kstrtol(buf, 10, &val);
-       if (err)
-               return -EINVAL;
-
-       if (val > 0 && val < 100) {
-               u32 term = readl(pwm->mmio_base + EP93XX_PWMx_TERM_COUNT);
-               u32 duty = ((term + 1) * val / 100) - 1;
-
-               writel(duty, pwm->mmio_base + EP93XX_PWMx_DUTY_CYCLE);
-               pwm->duty_percent = val;
-               return count;
-       }
-
-       return -EINVAL;
-}
-
-static ssize_t ep93xx_pwm_get_invert(struct device *dev,
-               struct device_attribute *attr, char *buf)
-{
-       struct platform_device *pdev = to_platform_device(dev);
-       struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
-       int inverted = readl(pwm->mmio_base + EP93XX_PWMx_INVERT) & 0x1;
-
-       return sprintf(buf, "%d\n", inverted);
-}
-
-static ssize_t ep93xx_pwm_set_invert(struct device *dev,
-               struct device_attribute *attr, const char *buf, size_t count)
-{
-       struct platform_device *pdev = to_platform_device(dev);
-       struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
-       long val;
-       int err;
-
-       err = kstrtol(buf, 10, &val);
-       if (err)
-               return -EINVAL;
-
-       if (val == 0)
-               writel(0x0, pwm->mmio_base + EP93XX_PWMx_INVERT);
-       else if (val == 1)
-               writel(0x1, pwm->mmio_base + EP93XX_PWMx_INVERT);
-       else
-               return -EINVAL;
-
-       return count;
-}
-
-static DEVICE_ATTR(min_freq, S_IRUGO, ep93xx_pwm_get_min_freq, NULL);
-static DEVICE_ATTR(max_freq, S_IRUGO, ep93xx_pwm_get_max_freq, NULL);
-static DEVICE_ATTR(freq, S_IWUSR | S_IRUGO,
-                  ep93xx_pwm_get_freq, ep93xx_pwm_set_freq);
-static DEVICE_ATTR(duty_percent, S_IWUSR | S_IRUGO,
-                  ep93xx_pwm_get_duty_percent, ep93xx_pwm_set_duty_percent);
-static DEVICE_ATTR(invert, S_IWUSR | S_IRUGO,
-                  ep93xx_pwm_get_invert, ep93xx_pwm_set_invert);
-
-static struct attribute *ep93xx_pwm_attrs[] = {
-       &dev_attr_min_freq.attr,
-       &dev_attr_max_freq.attr,
-       &dev_attr_freq.attr,
-       &dev_attr_duty_percent.attr,
-       &dev_attr_invert.attr,
-       NULL
-};
-
-static const struct attribute_group ep93xx_pwm_sysfs_files = {
-       .attrs  = ep93xx_pwm_attrs,
-};
-
-static int ep93xx_pwm_probe(struct platform_device *pdev)
-{
-       struct ep93xx_pwm *pwm;
-       struct resource *res;
-       int ret;
-
-       pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
-       if (!pwm)
-               return -ENOMEM;
-
-       pwm->clk = devm_clk_get(&pdev->dev, "pwm_clk");
-       if (IS_ERR(pwm->clk))
-               return PTR_ERR(pwm->clk);
-
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       pwm->mmio_base = devm_ioremap_resource(&pdev->dev, res);
-       if (IS_ERR(pwm->mmio_base))
-               return PTR_ERR(pwm->mmio_base);
-
-       ret = ep93xx_pwm_acquire_gpio(pdev);
-       if (ret)
-               return ret;
-
-       ret = sysfs_create_group(&pdev->dev.kobj, &ep93xx_pwm_sysfs_files);
-       if (ret) {
-               ep93xx_pwm_release_gpio(pdev);
-               return ret;
-       }
-
-       pwm->duty_percent = 50;
-
-       /* disable pwm at startup. Avoids zero value. */
-       writel(0x0, pwm->mmio_base + EP93XX_PWMx_ENABLE);
-       writel(EP93XX_PWM_MAX_COUNT, pwm->mmio_base + EP93XX_PWMx_TERM_COUNT);
-       writel(EP93XX_PWM_MAX_COUNT/2, pwm->mmio_base + EP93XX_PWMx_DUTY_CYCLE);
-
-       clk_enable(pwm->clk);
-
-       platform_set_drvdata(pdev, pwm);
-       return 0;
-}
-
-static int ep93xx_pwm_remove(struct platform_device *pdev)
-{
-       struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
-
-       writel(0x0, pwm->mmio_base + EP93XX_PWMx_ENABLE);
-       clk_disable(pwm->clk);
-       sysfs_remove_group(&pdev->dev.kobj, &ep93xx_pwm_sysfs_files);
-       ep93xx_pwm_release_gpio(pdev);
-
-       return 0;
-}
-
-static struct platform_driver ep93xx_pwm_driver = {
-       .driver         = {
-               .name   = "ep93xx-pwm",
-               .owner  = THIS_MODULE,
-       },
-       .probe          = ep93xx_pwm_probe,
-       .remove         = ep93xx_pwm_remove,
-};
-module_platform_driver(ep93xx_pwm_driver);
-
-MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>, "
-             "H Hartley Sweeten <hsweeten@visionengravers.com>");
-MODULE_DESCRIPTION("EP93xx PWM driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ep93xx-pwm");
index 75840b5..eece329 100644 (file)
@@ -62,6 +62,15 @@ config PWM_BFIN
          To compile this driver as a module, choose M here: the module
          will be called pwm-bfin.
 
+config PWM_EP93XX
+       tristate "Cirrus Logic EP93xx PWM support"
+       depends on ARCH_EP93XX
+       help
+         Generic PWM framework driver for Cirrus Logic EP93xx.
+
+         To compile this driver as a module, choose M here: the module
+         will be called pwm-ep93xx.
+
 config PWM_IMX
        tristate "i.MX PWM support"
        depends on ARCH_MXC
index 77a8c18..8b754e4 100644 (file)
@@ -3,6 +3,7 @@ obj-$(CONFIG_PWM_SYSFS)         += sysfs.o
 obj-$(CONFIG_PWM_AB8500)       += pwm-ab8500.o
 obj-$(CONFIG_PWM_ATMEL_TCB)    += pwm-atmel-tcb.o
 obj-$(CONFIG_PWM_BFIN)         += pwm-bfin.o
+obj-$(CONFIG_PWM_EP93XX)       += pwm-ep93xx.o
 obj-$(CONFIG_PWM_IMX)          += pwm-imx.o
 obj-$(CONFIG_PWM_JZ4740)       += pwm-jz4740.o
 obj-$(CONFIG_PWM_LPC32XX)      += pwm-lpc32xx.o
diff --git a/drivers/pwm/pwm-ep93xx.c b/drivers/pwm/pwm-ep93xx.c
new file mode 100644 (file)
index 0000000..33aa446
--- /dev/null
@@ -0,0 +1,230 @@
+/*
+ * PWM framework driver for Cirrus Logic EP93xx
+ *
+ * Copyright (c) 2009        Matthieu Crapet <mcrapet@gmail.com>
+ * Copyright (c) 2009, 2013  H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * EP9301/02 have only one channel:
+ *   platform device ep93xx-pwm.1 - PWMOUT1 (EGPIO14)
+ *
+ * EP9307 has only one channel:
+ *   platform device ep93xx-pwm.0 - PWMOUT
+ *
+ * EP9312/15 have two channels:
+ *   platform device ep93xx-pwm.0 - PWMOUT
+ *   platform device ep93xx-pwm.1 - PWMOUT1 (EGPIO14)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+
+#include <mach/platform.h>     /* for ep93xx_pwm_{acquire,release}_gpio() */
+
+#define EP93XX_PWMx_TERM_COUNT 0x00
+#define EP93XX_PWMx_DUTY_CYCLE 0x04
+#define EP93XX_PWMx_ENABLE     0x08
+#define EP93XX_PWMx_INVERT     0x0c
+
+struct ep93xx_pwm {
+       void __iomem *base;
+       struct clk *clk;
+       struct pwm_chip chip;
+};
+
+static inline struct ep93xx_pwm *to_ep93xx_pwm(struct pwm_chip *chip)
+{
+       return container_of(chip, struct ep93xx_pwm, chip);
+}
+
+static int ep93xx_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+       struct platform_device *pdev = to_platform_device(chip->dev);
+
+       return ep93xx_pwm_acquire_gpio(pdev);
+}
+
+static void ep93xx_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+       struct platform_device *pdev = to_platform_device(chip->dev);
+
+       ep93xx_pwm_release_gpio(pdev);
+}
+
+static int ep93xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+                            int duty_ns, int period_ns)
+{
+       struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip);
+       void __iomem *base = ep93xx_pwm->base;
+       unsigned long long c;
+       unsigned long period_cycles;
+       unsigned long duty_cycles;
+       unsigned long term;
+       int ret = 0;
+
+       /*
+        * The clock needs to be enabled to access the PWM registers.
+        * Configuration can be changed at any time.
+        */
+       if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+               ret = clk_enable(ep93xx_pwm->clk);
+               if (ret)
+                       return ret;
+       }
+
+       c = clk_get_rate(ep93xx_pwm->clk);
+       c *= period_ns;
+       do_div(c, 1000000000);
+       period_cycles = c;
+
+       c = period_cycles;
+       c *= duty_ns;
+       do_div(c, period_ns);
+       duty_cycles = c;
+
+       if (period_cycles < 0x10000 && duty_cycles < 0x10000) {
+               term = readw(base + EP93XX_PWMx_TERM_COUNT);
+
+               /* Order is important if PWM is running */
+               if (period_cycles > term) {
+                       writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT);
+                       writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE);
+               } else {
+                       writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE);
+                       writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT);
+               }
+       } else {
+               ret = -EINVAL;
+       }
+
+       if (!test_bit(PWMF_ENABLED, &pwm->flags))
+               clk_disable(ep93xx_pwm->clk);
+
+       return ret;
+}
+
+static int ep93xx_pwm_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+                              enum pwm_polarity polarity)
+{
+       struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip);
+       int ret;
+
+       /*
+        * The clock needs to be enabled to access the PWM registers.
+        * Polarity can only be changed when the PWM is disabled.
+        */
+       ret = clk_enable(ep93xx_pwm->clk);
+       if (ret)
+               return ret;
+
+       if (polarity == PWM_POLARITY_INVERSED)
+               writew(0x1, ep93xx_pwm->base + EP93XX_PWMx_INVERT);
+       else
+               writew(0x0, ep93xx_pwm->base + EP93XX_PWMx_INVERT);
+
+       clk_disable(ep93xx_pwm->clk);
+
+       return 0;
+}
+
+static int ep93xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+       struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip);
+       int ret;
+
+       ret = clk_enable(ep93xx_pwm->clk);
+       if (ret)
+               return ret;
+
+       writew(0x1, ep93xx_pwm->base + EP93XX_PWMx_ENABLE);
+
+       return 0;
+}
+
+static void ep93xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+       struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip);
+
+       writew(0x0, ep93xx_pwm->base + EP93XX_PWMx_ENABLE);
+       clk_disable(ep93xx_pwm->clk);
+}
+
+static const struct pwm_ops ep93xx_pwm_ops = {
+       .request = ep93xx_pwm_request,
+       .free = ep93xx_pwm_free,
+       .config = ep93xx_pwm_config,
+       .set_polarity = ep93xx_pwm_polarity,
+       .enable = ep93xx_pwm_enable,
+       .disable = ep93xx_pwm_disable,
+       .owner = THIS_MODULE,
+};
+
+static int ep93xx_pwm_probe(struct platform_device *pdev)
+{
+       struct ep93xx_pwm *ep93xx_pwm;
+       struct resource *res;
+       int ret;
+
+       ep93xx_pwm = devm_kzalloc(&pdev->dev, sizeof(*ep93xx_pwm), GFP_KERNEL);
+       if (!ep93xx_pwm)
+               return -ENOMEM;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       ep93xx_pwm->base = devm_ioremap_resource(&pdev->dev, res);
+       if (IS_ERR(ep93xx_pwm->base))
+               return PTR_ERR(ep93xx_pwm->base);
+
+       ep93xx_pwm->clk = devm_clk_get(&pdev->dev, "pwm_clk");
+       if (IS_ERR(ep93xx_pwm->clk))
+               return PTR_ERR(ep93xx_pwm->clk);
+
+       ep93xx_pwm->chip.dev = &pdev->dev;
+       ep93xx_pwm->chip.ops = &ep93xx_pwm_ops;
+       ep93xx_pwm->chip.base = -1;
+       ep93xx_pwm->chip.npwm = 1;
+
+       ret = pwmchip_add(&ep93xx_pwm->chip);
+       if (ret < 0)
+               return ret;
+
+       platform_set_drvdata(pdev, ep93xx_pwm);
+       return 0;
+}
+
+static int ep93xx_pwm_remove(struct platform_device *pdev)
+{
+       struct ep93xx_pwm *ep93xx_pwm = platform_get_drvdata(pdev);
+
+       return pwmchip_remove(&ep93xx_pwm->chip);
+}
+
+static struct platform_driver ep93xx_pwm_driver = {
+       .driver = {
+               .name = "ep93xx-pwm",
+       },
+       .probe = ep93xx_pwm_probe,
+       .remove = ep93xx_pwm_remove,
+};
+module_platform_driver(ep93xx_pwm_driver);
+
+MODULE_DESCRIPTION("Cirrus Logic EP93xx PWM driver");
+MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>, "
+             "H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_ALIAS("platform:ep93xx-pwm");
+MODULE_LICENSE("GPL");