+======================
sPAPR hypervisor calls
-----------------------
+======================
When used with the ``pseries`` machine type, ``qemu-system-ppc64`` implements
-a set of hypervisor calls (a.k.a. hcalls) defined in the `Linux on Power
-Architecture Reference document (LoPAR)
-<https://cdn.openpowerfoundation.org/wp-content/uploads/2020/07/LoPAR-20200812.pdf>`_.
-This document is a subset of the Power Architecture Platform Reference (PAPR+)
-specification (IBM internal only), which is what PowerVM, the IBM proprietary
-hypervisor, adheres to.
+a set of hypervisor calls (a.k.a. hcalls) defined in the Linux on Power
+Architecture Reference ([LoPAR]_) document. This document is a subset of the
+Power Architecture Platform Reference (PAPR+) specification (IBM internal only),
+which is what PowerVM, the IBM proprietary hypervisor, adheres to.
The subset in LoPAR is selected based on the requirements of Linux as a guest.
All those hypercalls start at hcall number 0xf000 which correspond
to an implementation specific range in PAPR.
-H_RTAS (0xf000)
-^^^^^^^^^^^^^^^
+``H_RTAS (0xf000)``
+===================
RTAS stands for Run-Time Abstraction Sercies and is a set of runtime services
generally provided by the firmware inside the guest to the operating system. It
``H_PARAMETER``: Unknown token.
-H_LOGICAL_MEMOP (0xf001)
-^^^^^^^^^^^^^^^^^^^^^^^^
+``H_LOGICAL_MEMOP (0xf001)``
+============================
When the guest runs in "real mode" (in powerpc terminology this means with MMU
disabled, i.e. guest effective address equals to guest physical address), it
+===================================
pSeries family boards (``pseries``)
===================================
-The Power machine para-virtualized environment described by the `Linux on Power
-Architecture Reference document (LoPAR)
-<https://openpowerfoundation.org/wp-content/uploads/2020/07/LoPAR-20200812.pdf>`_
-is called pSeries. This environment is also known as sPAPR, System p guests, or
-simply Power Linux guests (although it is capable of running other operating
-systems, such as AIX).
+The Power machine para-virtualized environment described by the Linux on Power
+Architecture Reference ([LoPAR]_) document is called pSeries. This environment
+is also known as sPAPR, System p guests, or simply Power Linux guests (although
+it is capable of running other operating systems, such as AIX).
Even though pSeries is designed to behave as a guest environment, it is also
capable of acting as a hypervisor OS, providing, on that role, nested
virtualization capabilities.
Supported devices
------------------
+=================
* Multi processor support for many Power processors generations: POWER7,
POWER7+, POWER8, POWER8NVL, POWER9, and Power10. Support for POWER5+ exists,
* PCIe device pass through.
Missing devices
----------------
+===============
* SPICE support.
Firmware
---------
+========
`SLOF <https://github.com/aik/SLOF>`_ (Slimline Open Firmware) is an
implementation of the `IEEE 1275-1994, Standard for Boot (Initialization
version is required.
Build directions
-----------------
+================
.. code-block:: bash
./configure --target-list=ppc64-softmmu && make
Running instructions
---------------------
+====================
Someone can select the pSeries machine type by running QEMU with the following
options:
qemu-system-ppc64 -M pseries <other QEMU arguments>
sPAPR devices
--------------
+=============
The sPAPR specification defines a set of para-virtualized devices, which are
also supported by the pSeries machine in QEMU and can be instantiated with the
NVRAM device with ``-global spapr-nvram.drive=pfid``.
sPAPR specification
-^^^^^^^^^^^^^^^^^^^
+-------------------
-The main source of documentation on the sPAPR standard is the `Linux on Power
-Architecture Reference document (LoPAR)
-<https://openpowerfoundation.org/wp-content/uploads/2020/07/LoPAR-20200812.pdf>`_.
+The main source of documentation on the sPAPR standard is the [LoPAR]_ document.
However, documentation specific to QEMU's implementation of the specification
can also be found in QEMU documentation:
(``/docs/specs/ppc-spapr-uv-hcalls.txt``).
Switching between the KVM-PR and KVM-HV kernel module
------------------------------------------------------
+=====================================================
Currently, there are two implementations of KVM on Power, ``kvm_hv.ko`` and
``kvm_pr.ko``.
instead.
KVM-PR
-^^^^^^
+------
KVM-PR uses the so-called **PR**\ oblem state of the PPC CPUs to run the guests,
i.e. the virtual machine is run in user mode and all privileged instructions
QEMU with ``kernel_irqchip=off`` command line option.
KVM-HV
-^^^^^^
+------
KVM-HV uses the hypervisor mode of more recent Power processors, that allow
access to the bare metal hardware directly. Although POWER7 had this capability,
``-cpu POWER8,compat=power7`` as parameter to QEMU.
Modules support
----------------
+===============
As noticed in the sections above, each module can run in a different
environment. The following table shows with which environment each module can
Maintainer contact information
-------------------------------
+==============================
Cédric Le Goater <clg@kaod.org>
Daniel Henrique Barboza <danielhb413@gmail.com>
+
+.. [LoPAR] `Linux on Power Architecture Reference document (LoPAR) revision
+ 2.9 <https://openpowerfoundation.org/wp-content/uploads/2020/07/LoPAR-20200812.pdf>`_.