static void extended_remote_open (char *name, int from_tty);
static void extended_remote_async_open (char *name, int from_tty);
-static void remote_open_1 (char *, int, struct target_ops *, int extended_p);
-static void remote_async_open_1 (char *, int, struct target_ops *,
- int extended_p);
+static void remote_open_1 (char *, int, struct target_ops *, int extended_p,
+ int async_p);
static void remote_close (int quitting);
static void update_packet_config (struct packet_config *config);
-/* Define the target subroutine names */
-
-void open_remote_target (char *, int, struct target_ops *, int);
-
void _initialize_remote (void);
/* Description of the remote protocol. Strictly speaking, when the
static void
remote_open (char *name, int from_tty)
{
- remote_open_1 (name, from_tty, &remote_ops, 0);
+ remote_open_1 (name, from_tty, &remote_ops, 0, 0);
}
/* Just like remote_open, but with asynchronous support. */
static void
remote_async_open (char *name, int from_tty)
{
- remote_async_open_1 (name, from_tty, &remote_async_ops, 0);
+ remote_open_1 (name, from_tty, &remote_async_ops, 0, 1);
}
/* Open a connection to a remote debugger using the extended
static void
extended_remote_open (char *name, int from_tty)
{
- remote_open_1 (name, from_tty, &extended_remote_ops, 1 /*extended_p */ );
+ remote_open_1 (name, from_tty, &extended_remote_ops, 1 /*extended_p */,
+ 0 /* async_p */);
}
/* Just like extended_remote_open, but with asynchronous support. */
static void
extended_remote_async_open (char *name, int from_tty)
{
- remote_async_open_1 (name, from_tty, &extended_async_remote_ops, 1 /*extended_p */ );
+ remote_open_1 (name, from_tty, &extended_async_remote_ops,
+ 1 /*extended_p */, 1 /* async_p */);
}
/* Generic code for opening a connection to a remote target. */
static void
remote_open_1 (char *name, int from_tty, struct target_ops *target,
- int extended_p)
+ int extended_p, int async_p)
{
int ex;
struct remote_state *rs = get_remote_state ();
"(e.g. /dev/ttyS0, /dev/ttya, COM1, etc.).");
/* See FIXME above */
- wait_forever_enabled_p = 1;
+ if (!async_p)
+ wait_forever_enabled_p = 1;
target_preopen (from_tty);
someday have a notion of debugging several processes. */
inferior_ptid = pid_to_ptid (MAGIC_NULL_PID);
+
+ if (async_p)
+ {
+ /* With this target we start out by owning the terminal. */
+ remote_async_terminal_ours_p = 1;
+
+ /* FIXME: cagney/1999-09-23: During the initial connection it is
+ assumed that the target is already ready and able to respond to
+ requests. Unfortunately remote_start_remote() eventually calls
+ wait_for_inferior() with no timeout. wait_forever_enabled_p gets
+ around this. Eventually a mechanism that allows
+ wait_for_inferior() to expect/get timeouts will be
+ implemented. */
+ wait_forever_enabled_p = 0;
+ }
+
#ifdef SOLIB_CREATE_INFERIOR_HOOK
/* First delete any symbols previously loaded from shared libraries. */
no_shared_libraries (NULL, 0);
if (ex < 0)
{
pop_target ();
+ if (async_p)
+ wait_forever_enabled_p = 1;
throw_exception (ex);
}
- if (extended_p)
- {
- /* Tell the remote that we are using the extended protocol. */
- char *buf = alloca (rs->remote_packet_size);
- putpkt ("!");
- getpkt (buf, (rs->remote_packet_size), 0);
- }
-#ifdef SOLIB_CREATE_INFERIOR_HOOK
- /* FIXME: need a master target_open vector from which all
- remote_opens can be called, so that stuff like this can
- go there. Failing that, the following code must be copied
- to the open function for any remote target that wants to
- support svr4 shared libraries. */
-
- /* Set up to detect and load shared libraries. */
- if (exec_bfd) /* No use without an exec file. */
- {
- SOLIB_CREATE_INFERIOR_HOOK (PIDGET (inferior_ptid));
- remote_check_symbols (symfile_objfile);
- }
-#endif
-}
-
-/* Just like remote_open but with asynchronous support. */
-static void
-remote_async_open_1 (char *name, int from_tty, struct target_ops *target,
- int extended_p)
-{
- int ex;
- struct remote_state *rs = get_remote_state ();
- if (name == 0)
- error ("To open a remote debug connection, you need to specify what\n"
- "serial device is attached to the remote system\n"
- "(e.g. /dev/ttyS0, /dev/ttya, COM1, etc.).");
-
- target_preopen (from_tty);
-
- unpush_target (target);
-
- remote_desc = remote_serial_open (name);
- if (!remote_desc)
- perror_with_name (name);
-
- if (baud_rate != -1)
- {
- if (serial_setbaudrate (remote_desc, baud_rate))
- {
- serial_close (remote_desc);
- perror_with_name (name);
- }
- }
-
- serial_raw (remote_desc);
-
- /* If there is something sitting in the buffer we might take it as a
- response to a command, which would be bad. */
- serial_flush_input (remote_desc);
-
- if (from_tty)
- {
- puts_filtered ("Remote debugging using ");
- puts_filtered (name);
- puts_filtered ("\n");
- }
-
- push_target (target); /* Switch to using remote target now */
-
- init_all_packet_configs ();
-
- general_thread = -2;
- continue_thread = -2;
-
- /* Probe for ability to use "ThreadInfo" query, as required. */
- use_threadinfo_query = 1;
- use_threadextra_query = 1;
-
- /* Without this, some commands which require an active target (such
- as kill) won't work. This variable serves (at least) double duty
- as both the pid of the target process (if it has such), and as a
- flag indicating that a target is active. These functions should
- be split out into seperate variables, especially since GDB will
- someday have a notion of debugging several processes. */
- inferior_ptid = pid_to_ptid (MAGIC_NULL_PID);
-
- /* With this target we start out by owning the terminal. */
- remote_async_terminal_ours_p = 1;
-
- /* FIXME: cagney/1999-09-23: During the initial connection it is
- assumed that the target is already ready and able to respond to
- requests. Unfortunately remote_start_remote() eventually calls
- wait_for_inferior() with no timeout. wait_forever_enabled_p gets
- around this. Eventually a mechanism that allows
- wait_for_inferior() to expect/get timeouts will be
- implemented. */
- wait_forever_enabled_p = 0;
-
-#ifdef SOLIB_CREATE_INFERIOR_HOOK
- /* First delete any symbols previously loaded from shared libraries. */
- no_shared_libraries (NULL, 0);
-#endif
-
- /* Start the remote connection; if error, discard this target. See
- the comments in remote_open_1() for further details such as the
- need to re-throw the exception. */
- ex = catch_exceptions (uiout,
- remote_start_remote, NULL,
- "Couldn't establish connection to remote"
- " target\n",
- RETURN_MASK_ALL);
- if (ex < 0)
- {
- pop_target ();
- wait_forever_enabled_p = 1;
- throw_exception (ex);
- }
-
- wait_forever_enabled_p = 1;
+ if (async_p)
+ wait_forever_enabled_p = 1;
if (extended_p)
{
remote_open (name, from_tty);
}
-/* Other targets want to use the entire remote serial module but with
- certain remote_ops overridden. */
-
-void
-open_remote_target (char *name, int from_tty, struct target_ops *target,
- int extended_p)
-{
- printf_filtered ("Selecting the %sremote protocol\n",
- (extended_p ? "extended-" : ""));
- remote_open_1 (name, from_tty, target, extended_p);
-}
-
/* Table used by the crc32 function to calcuate the checksum. */
static unsigned long crc32_table[256] =
OSDN Git Service
