r8152: rename fw_type_1 with fw_mac

The struct fw_type_1 is used by MAC only, so rename it to a meaningful one.

Besides, adjust two messages. Replace "load xxx fail" with "check xxx fail"

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 55d0bcb..55a7674 100644 (file)
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -867,11 +867,11 @@ struct fw_header {
 } __packed;
 
 /**
- * struct fw_type_1 - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
+ * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
  *     The layout of the firmware block is:
- *     <struct fw_type_1> + <info> + <firmware data>.
+ *     <struct fw_mac> + <info> + <firmware data>.
  * @fw_offset: offset of the firmware binary data. The start address of
- *     the data would be the address of struct fw_type_1 + @fw_offset.
+ *     the data would be the address of struct fw_mac + @fw_offset.
  * @fw_reg: the register to load the firmware. Depends on chip.
  * @bp_ba_addr: the register to write break point base address. Depends on
  *     chip.
@@ -888,7 +888,7 @@ struct fw_header {
  * @info: additional information for debugging, and is followed by the
  *     binary data of firmware.
  */
-struct fw_type_1 {
+struct fw_mac {
        struct fw_block blk_hdr;
        __le16 fw_offset;
        __le16 fw_reg;
@@ -3397,14 +3397,14 @@ static void rtl_clear_bp(struct r8152 *tp, u16 type)
        ocp_write_word(tp, type, PLA_BP_BA, 0);
 }
 
-static bool rtl8152_is_fw_type1_ok(struct r8152 *tp, struct fw_type_1 *type1)
+static bool rtl8152_is_fw_mac_ok(struct r8152 *tp, struct fw_mac *mac)
 {
        u16 fw_reg, bp_ba_addr, bp_en_addr, bp_start;
        bool rc = false;
        u32 length, type;
        int i, max_bp;
 
-       type = __le32_to_cpu(type1->blk_hdr.type);
+       type = __le32_to_cpu(mac->blk_hdr.type);
        if (type == RTL_FW_PLA) {
                switch (tp->version) {
                case RTL_VER_01:
@@ -3461,46 +3461,46 @@ static bool rtl8152_is_fw_type1_ok(struct r8152 *tp, struct fw_type_1 *type1)
                goto out;
        }
 
-       length = __le32_to_cpu(type1->blk_hdr.length);
-       if (length < __le16_to_cpu(type1->fw_offset)) {
+       length = __le32_to_cpu(mac->blk_hdr.length);
+       if (length < __le16_to_cpu(mac->fw_offset)) {
                dev_err(&tp->intf->dev, "invalid fw_offset\n");
                goto out;
        }
 
-       length -= __le16_to_cpu(type1->fw_offset);
+       length -= __le16_to_cpu(mac->fw_offset);
        if (length < 4 || (length & 3)) {
                dev_err(&tp->intf->dev, "invalid block length\n");
                goto out;
        }
 
-       if (__le16_to_cpu(type1->fw_reg) != fw_reg) {
+       if (__le16_to_cpu(mac->fw_reg) != fw_reg) {
                dev_err(&tp->intf->dev, "invalid register to load firmware\n");
                goto out;
        }
 
-       if (__le16_to_cpu(type1->bp_ba_addr) != bp_ba_addr) {
+       if (__le16_to_cpu(mac->bp_ba_addr) != bp_ba_addr) {
                dev_err(&tp->intf->dev, "invalid base address register\n");
                goto out;
        }
 
-       if (__le16_to_cpu(type1->bp_en_addr) != bp_en_addr) {
+       if (__le16_to_cpu(mac->bp_en_addr) != bp_en_addr) {
                dev_err(&tp->intf->dev, "invalid enabled mask register\n");
                goto out;
        }
 
-       if (__le16_to_cpu(type1->bp_start) != bp_start) {
+       if (__le16_to_cpu(mac->bp_start) != bp_start) {
                dev_err(&tp->intf->dev,
                        "invalid start register of break point\n");
                goto out;
        }
 
-       if (__le16_to_cpu(type1->bp_num) > max_bp) {
+       if (__le16_to_cpu(mac->bp_num) > max_bp) {
                dev_err(&tp->intf->dev, "invalid break point number\n");
                goto out;
        }
 
-       for (i = __le16_to_cpu(type1->bp_num); i < max_bp; i++) {
-               if (type1->bp[i]) {
+       for (i = __le16_to_cpu(mac->bp_num); i < max_bp; i++) {
+               if (mac->bp[i]) {
                        dev_err(&tp->intf->dev, "unused bp%u is not zero\n", i);
                        goto out;
                }
@@ -3566,7 +3566,7 @@ static long rtl8152_check_firmware(struct r8152 *tp, struct rtl_fw *rtl_fw)
 {
        const struct firmware *fw = rtl_fw->fw;
        struct fw_header *fw_hdr = (struct fw_header *)fw->data;
-       struct fw_type_1 *pla = NULL, *usb = NULL;
+       struct fw_mac *pla = NULL, *usb = NULL;
        long ret = -EFAULT;
        int i;
 
@@ -3601,10 +3601,10 @@ static long rtl8152_check_firmware(struct r8152 *tp, struct rtl_fw *rtl_fw)
                                goto fail;
                        }
 
-                       pla = (struct fw_type_1 *)block;
-                       if (!rtl8152_is_fw_type1_ok(tp, pla)) {
+                       pla = (struct fw_mac *)block;
+                       if (!rtl8152_is_fw_mac_ok(tp, pla)) {
                                dev_err(&tp->intf->dev,
-                                       "load PLA firmware failed\n");
+                                       "check PLA firmware failed\n");
                                goto fail;
                        }
                        break;
@@ -3615,10 +3615,10 @@ static long rtl8152_check_firmware(struct r8152 *tp, struct rtl_fw *rtl_fw)
                                goto fail;
                        }
 
-                       usb = (struct fw_type_1 *)block;
-                       if (!rtl8152_is_fw_type1_ok(tp, usb)) {
+                       usb = (struct fw_mac *)block;
+                       if (!rtl8152_is_fw_mac_ok(tp, usb)) {
                                dev_err(&tp->intf->dev,
-                                       "load USB firmware failed\n");
+                                       "check USB firmware failed\n");
                                goto fail;
                        }
                        break;
@@ -3638,14 +3638,14 @@ fail:
        return ret;
 }
 
-static void rtl8152_fw_type_1_apply(struct r8152 *tp, struct fw_type_1 *type1)
+static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac)
 {
        u16 bp_en_addr, bp_index, type, bp_num, fw_ver_reg;
        u32 length;
        u8 *data;
        int i;
 
-       switch (__le32_to_cpu(type1->blk_hdr.type)) {
+       switch (__le32_to_cpu(mac->blk_hdr.type)) {
        case RTL_FW_PLA:
                type = MCU_TYPE_PLA;
                break;
@@ -3667,36 +3667,36 @@ static void rtl8152_fw_type_1_apply(struct r8152 *tp, struct fw_type_1 *type1)
                ocp_write_word(tp, MCU_TYPE_PLA, PLA_MACDBG_POST, DEBUG_LTSSM);
        }
 
-       length = __le32_to_cpu(type1->blk_hdr.length);
-       length -= __le16_to_cpu(type1->fw_offset);
+       length = __le32_to_cpu(mac->blk_hdr.length);
+       length -= __le16_to_cpu(mac->fw_offset);
 
-       data = (u8 *)type1;
-       data += __le16_to_cpu(type1->fw_offset);
+       data = (u8 *)mac;
+       data += __le16_to_cpu(mac->fw_offset);
 
-       generic_ocp_write(tp, __le16_to_cpu(type1->fw_reg), 0xff, length, data,
+       generic_ocp_write(tp, __le16_to_cpu(mac->fw_reg), 0xff, length, data,
                          type);
 
-       ocp_write_word(tp, type, __le16_to_cpu(type1->bp_ba_addr),
-                      __le16_to_cpu(type1->bp_ba_value));
+       ocp_write_word(tp, type, __le16_to_cpu(mac->bp_ba_addr),
+                      __le16_to_cpu(mac->bp_ba_value));
 
-       bp_index = __le16_to_cpu(type1->bp_start);
-       bp_num = __le16_to_cpu(type1->bp_num);
+       bp_index = __le16_to_cpu(mac->bp_start);
+       bp_num = __le16_to_cpu(mac->bp_num);
        for (i = 0; i < bp_num; i++) {
-               ocp_write_word(tp, type, bp_index, __le16_to_cpu(type1->bp[i]));
+               ocp_write_word(tp, type, bp_index, __le16_to_cpu(mac->bp[i]));
                bp_index += 2;
        }
 
-       bp_en_addr = __le16_to_cpu(type1->bp_en_addr);
+       bp_en_addr = __le16_to_cpu(mac->bp_en_addr);
        if (bp_en_addr)
                ocp_write_word(tp, type, bp_en_addr,
-                              __le16_to_cpu(type1->bp_en_value));
+                              __le16_to_cpu(mac->bp_en_value));
 
-       fw_ver_reg = __le16_to_cpu(type1->fw_ver_reg);
+       fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg);
        if (fw_ver_reg)
                ocp_write_byte(tp, MCU_TYPE_USB, fw_ver_reg,
-                              type1->fw_ver_data);
+                              mac->fw_ver_data);
 
-       dev_dbg(&tp->intf->dev, "successfully applied %s\n", type1->info);
+       dev_dbg(&tp->intf->dev, "successfully applied %s\n", mac->info);
 }
 
 static void rtl8152_apply_firmware(struct r8152 *tp)
@@ -3720,7 +3720,7 @@ static void rtl8152_apply_firmware(struct r8152 *tp)
                        goto post_fw;
                case RTL_FW_PLA:
                case RTL_FW_USB:
-                       rtl8152_fw_type_1_apply(tp, (struct fw_type_1 *)block);
+                       rtl8152_fw_mac_apply(tp, (struct fw_mac *)block);
                        break;
                default:
                        break;