In qdev_set_parent_bus(), when changing the parent bus of a
realized device, if the source and destination buses are not in the
same reset state, some adaptations are required. This patch adds
needed call to resettable_change_parent() to make sure a device reset
state stays coherent with its parent bus.
The addition is a no-op if:
1. the device being parented is not realized.
2. the device is realized, but both buses are not under reset.
Case 2 means that as long as qdev_set_parent_bus() is called
during the machine realization procedure (which is before the
machine reset so nothing is in reset), it is a no op.
There are 52 call sites of qdev_set_parent_bus(). All but one fall
into the no-op case:
+ 29 trivial calls related to virtio (in hw/{s390x,display,virtio}/
{vhost,virtio}-xxx.c) to set a vdev(or vgpu) composing device
parent bus just before realizing the same vdev(vgpu).
+ hw/core/qdev.c: when creating a device in qdev_try_create()
+ hw/core/sysbus.c: when initializing a device in the sysbus
+ hw/i386/amd_iommu.c: before realizing AMDVIState/pci
+ hw/isa/piix4.c: before realizing PIIX4State/rtc
+ hw/misc/auxbus.c: when creating an AUXBus
+ hw/misc/auxbus.c: when creating an AUXBus child
+ hw/misc/macio/macio.c: when initializing a MACIOState child
+ hw/misc/macio/macio.c: before realizing NewWorldMacIOState/pmu
+ hw/misc/macio/macio.c: before realizing NewWorldMacIOState/cuda
+ hw/net/virtio-net.c: Used for migration when using the failover
mechanism to migration a vfio-pci/net. It is
a no-op because at this point the device is
already on the bus.
+ hw/pci-host/designware.c: before realizing DesignwarePCIEHost/root
+ hw/pci-host/gpex.c: before realizing GPEXHost/root
+ hw/pci-host/prep.c: when initialiazing PREPPCIState/pci_dev
+ hw/pci-host/q35.c: before realizing Q35PCIHost/mch
+ hw/pci-host/versatile.c: when initializing PCIVPBState/pci_dev
+ hw/pci-host/xilinx-pcie.c: before realizing XilinxPCIEHost/root
+ hw/s390x/event-facility.c: when creating SCLPEventFacility/
TYPE_SCLP_QUIESCE
+ hw/s390x/event-facility.c: ditto with SCLPEventFacility/
TYPE_SCLP_CPU_HOTPLUG
+ hw/s390x/sclp.c: Not trivial because it is called on a SLCPDevice
just after realizing it. Ok because at this point the destination
bus (sysbus) is not in reset; the realize step is before the
machine reset.
+ hw/sd/core.c: Not OK. Used in sdbus_reparent_card(). See below.
+ hw/ssi/ssi.c: Used to put spi slave on spi bus and connect the cs
line in ssi_auto_connect_slave(). Ok because this function is only
used in realize step in hw/ssi/aspeed_smc.ci, hw/ssi/imx_spi.c,
hw/ssi/mss-spi.c, hw/ssi/xilinx_spi.c and hw/ssi/xilinx_spips.c.
+ hw/xen/xen-legacy-backend.c: when creating a XenLegacyDevice device
+ qdev-monitor.c: in device hotplug creation procedure before realize
Note that this commit alone will have no effect, right now there is no
use of resettable API to reset anything. So a bus will never be tagged
as in-reset by this same API.
The one place where side-effect will occurs is in hw/sd/core.c in
sdbus_reparent_card(). This function is only used in the raspi machines,
including during the sysbus reset procedure. This case will be
carrefully handled when doing the multiple phase reset transition.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20200123132823.
1117486-7-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
void qdev_set_parent_bus(DeviceState *dev, BusState *bus)
{
- bool replugging = dev->parent_bus != NULL;
+ BusState *old_parent_bus = dev->parent_bus;
- if (replugging) {
+ if (old_parent_bus) {
trace_qdev_update_parent_bus(dev, object_get_typename(OBJECT(dev)),
- dev->parent_bus, object_get_typename(OBJECT(dev->parent_bus)),
+ old_parent_bus, object_get_typename(OBJECT(old_parent_bus)),
OBJECT(bus), object_get_typename(OBJECT(bus)));
/*
* Keep a reference to the device while it's not plugged into
* any bus, to avoid it potentially evaporating when it is
* dereffed in bus_remove_child().
+ * Also keep the ref of the parent bus until the end, so that
+ * we can safely call resettable_change_parent() below.
*/
object_ref(OBJECT(dev));
bus_remove_child(dev->parent_bus, dev);
- object_unref(OBJECT(dev->parent_bus));
}
dev->parent_bus = bus;
object_ref(OBJECT(bus));
bus_add_child(bus, dev);
- if (replugging) {
+ if (dev->realized) {
+ resettable_change_parent(OBJECT(dev), OBJECT(bus),
+ OBJECT(old_parent_bus));
+ }
+ if (old_parent_bus) {
+ object_unref(OBJECT(old_parent_bus));
object_unref(OBJECT(dev));
}
}