debug_objects [KNL] Enable object debugging
- no_debug_objects
- [KNL] Disable object debugging
-
debug_guardpage_minorder=
[KNL] When CONFIG_DEBUG_PAGEALLOC is set, this
parameter allows control of the order of pages that will
no5lvl [X86-64] Disable 5-level paging mode. Forces
kernel to use 4-level paging instead.
- nofsgsbase [X86] Disables FSGSBASE instructions.
+ noaliencache [MM, NUMA, SLAB] Disables the allocation of alien
+ caches in the slab allocator. Saves per-node memory,
+ but will impact performance.
+
+ noalign [KNL,ARM]
+
+ noaltinstr [S390] Disables alternative instructions patching
+ (CPU alternatives feature).
+
+ noapic [SMP,APIC] Tells the kernel to not make use of any
+ IOAPICs that may be present in the system.
+
+ noautogroup Disable scheduler automatic task group creation.
+
+ nocache [ARM]
no_console_suspend
[HW] Never suspend the console
/sys/module/printk/parameters/console_suspend) to
turn on/off it dynamically.
- novmcoredd [KNL,KDUMP]
- Disable device dump. Device dump allows drivers to
- append dump data to vmcore so you can collect driver
- specified debug info. Drivers can append the data
- without any limit and this data is stored in memory,
- so this may cause significant memory stress. Disabling
- device dump can help save memory but the driver debug
- data will be no longer available. This parameter
- is only available when CONFIG_PROC_VMCORE_DEVICE_DUMP
- is set.
-
- noaliencache [MM, NUMA, SLAB] Disables the allocation of alien
- caches in the slab allocator. Saves per-node memory,
- but will impact performance.
-
- noalign [KNL,ARM]
-
- noaltinstr [S390] Disables alternative instructions patching
- (CPU alternatives feature).
-
- noapic [SMP,APIC] Tells the kernel to not make use of any
- IOAPICs that may be present in the system.
-
- noautogroup Disable scheduler automatic task group creation.
-
- nocache [ARM]
+ no_debug_objects
+ [KNL] Disable object debugging
nodsp [SH] Disable hardware DSP at boot time.
noexec [IA-64]
- nosmap [PPC]
- Disable SMAP (Supervisor Mode Access Prevention)
- even if it is supported by processor.
-
- nosmep [PPC64s]
- Disable SMEP (Supervisor Mode Execution Prevention)
- even if it is supported by processor.
-
noexec32 [X86-64]
This affects only 32-bit executables.
noexec32=on: enable non-executable mappings (default)
noexec32=off: disable non-executable mappings
read implies executable mappings
+ no_file_caps Tells the kernel not to honor file capabilities. The
+ only way then for a file to be executed with privilege
+ is to be setuid root or executed by root.
+
nofpu [MIPS,SH] Disable hardware FPU at boot time.
+ nofsgsbase [X86] Disables FSGSBASE instructions.
+
nofxsr [BUGS=X86-32] Disables x86 floating point extended
register save and restore. The kernel will only save
legacy floating-point registers on task switch.
- nohugeiomap [KNL,X86,PPC,ARM64] Disable kernel huge I/O mappings.
-
- nohugevmalloc [KNL,X86,PPC,ARM64] Disable kernel huge vmalloc mappings.
-
- nosmt [KNL,S390] Disable symmetric multithreading (SMT).
- Equivalent to smt=1.
-
- [KNL,X86] Disable symmetric multithreading (SMT).
- nosmt=force: Force disable SMT, cannot be undone
- via the sysfs control file.
-
- nospectre_v1 [X86,PPC] Disable mitigations for Spectre Variant 1
- (bounds check bypass). With this option data leaks are
- possible in the system.
-
- nospectre_v2 [X86,PPC_E500,ARM64] Disable all mitigations for
- the Spectre variant 2 (indirect branch prediction)
- vulnerability. System may allow data leaks with this
- option.
-
- nospectre_bhb [ARM64] Disable all mitigations for Spectre-BHB (branch
- history injection) vulnerability. System may allow data leaks
- with this option.
-
- nospec_store_bypass_disable
- [HW] Disable all mitigations for the Speculative Store Bypass vulnerability
-
- no_uaccess_flush
- [PPC] Don't flush the L1-D cache after accessing user data.
-
- noxsave [BUGS=X86] Disables x86 extended register state save
- and restore using xsave. The kernel will fallback to
- enabling legacy floating-point and sse state.
-
- noxsaveopt [X86] Disables xsaveopt used in saving x86 extended
- register states. The kernel will fall back to use
- xsave to save the states. By using this parameter,
- performance of saving the states is degraded because
- xsave doesn't support modified optimization while
- xsaveopt supports it on xsaveopt enabled systems.
-
- noxsaves [X86] Disables xsaves and xrstors used in saving and
- restoring x86 extended register state in compacted
- form of xsave area. The kernel will fall back to use
- xsaveopt and xrstor to save and restore the states
- in standard form of xsave area. By using this
- parameter, xsave area per process might occupy more
- memory on xsaves enabled systems.
-
- nohlt [ARM,ARM64,MICROBLAZE,SH] Forces the kernel to busy wait
- in do_idle() and not use the arch_cpu_idle()
- implementation; requires CONFIG_GENERIC_IDLE_POLL_SETUP
- to be effective. This is useful on platforms where the
- sleep(SH) or wfi(ARM,ARM64) instructions do not work
- correctly or when doing power measurements to evaluate
- the impact of the sleep instructions. This is also
- useful when using JTAG debugger.
-
- no_file_caps Tells the kernel not to honor file capabilities. The
- only way then for a file to be executed with privilege
- is to be setuid root or executed by root.
-
nohalt [IA-64] Tells the kernel not to use the power saving
function PAL_HALT_LIGHT when idle. This increases
power-consumption. On the positive side, it reduces
nohibernate [HIBERNATION] Disable hibernation and resume.
+ nohlt [ARM,ARM64,MICROBLAZE,SH] Forces the kernel to busy wait
+ in do_idle() and not use the arch_cpu_idle()
+ implementation; requires CONFIG_GENERIC_IDLE_POLL_SETUP
+ to be effective. This is useful on platforms where the
+ sleep(SH) or wfi(ARM,ARM64) instructions do not work
+ correctly or when doing power measurements to evaluate
+ the impact of the sleep instructions. This is also
+ useful when using JTAG debugger.
+
+ nohugeiomap [KNL,X86,PPC,ARM64] Disable kernel huge I/O mappings.
+
+ nohugevmalloc [KNL,X86,PPC,ARM64] Disable kernel huge vmalloc mappings.
+
nohz= [KNL] Boottime enable/disable dynamic ticks
Valid arguments: on, off
Default: on
Note that this argument takes precedence over
the CONFIG_RCU_NOCB_CPU_DEFAULT_ALL option.
- noiotrap [SH] Disables trapped I/O port accesses.
-
- noirqdebug [X86-32] Disables the code which attempts to detect and
- disable unhandled interrupt sources.
-
- no_timer_check [X86,APIC] Disables the code which tests for
- broken timer IRQ sources.
-
- noisapnp [ISAPNP] Disables ISA PnP code.
-
noinitrd [RAM] Tells the kernel not to load any configured
initial RAM disk.
noinvpcid [X86] Disable the INVPCID cpu feature.
+ noiotrap [SH] Disables trapped I/O port accesses.
+
+ noirqdebug [X86-32] Disables the code which attempts to detect and
+ disable unhandled interrupt sources.
+
+ noisapnp [ISAPNP] Disables ISA PnP code.
+
nojitter [IA-64] Disables jitter checking for ITC timers.
nokaslr [KNL]
kernel and module base offset ASLR (Address Space
Layout Randomization).
- no-kvmclock [X86,KVM] Disable paravirtualized KVM clock driver
-
no-kvmapf [X86,KVM] Disable paravirtualized asynchronous page
fault handling.
- no-vmw-sched-clock
- [X86,PV_OPS] Disable paravirtualized VMware scheduler
- clock and use the default one.
-
- no-steal-acc [X86,PV_OPS,ARM64,PPC/PSERIES] Disable paravirtualized
- steal time accounting. steal time is computed, but
- won't influence scheduler behaviour
+ no-kvmclock [X86,KVM] Disable paravirtualized KVM clock driver
nolapic [X86-32,APIC] Do not enable or use the local APIC.
nomfgpt [X86-32] Disable Multi-Function General Purpose
Timer usage (for AMD Geode machines).
- nonmi_ipi [X86] Disable using NMI IPIs during panic/reboot to
- shutdown the other cpus. Instead use the REBOOT_VECTOR
- irq.
-
nomodeset Disable kernel modesetting. Most systems' firmware
sets up a display mode and provides framebuffer memory
for output. With nomodeset, DRM and fbdev drivers will
nomodule Disable module load
+ nonmi_ipi [X86] Disable using NMI IPIs during panic/reboot to
+ shutdown the other cpus. Instead use the REBOOT_VECTOR
+ irq.
+
nopat [X86] Disable PAT (page attribute table extension of
pagetables) support.
nopku [X86] Disable Memory Protection Keys CPU feature found
in some Intel CPUs.
+ nopti [X86-64]
+ Equivalent to pti=off
+
nopv= [X86,XEN,KVM,HYPER_V,VMWARE]
Disables the PV optimizations forcing the guest to run
as generic guest with no PV drivers. Currently support
noresume [SWSUSP] Disables resume and restores original swap
space.
+ nosbagart [IA-64]
+
no-scroll [VGA] Disables scrollback.
This is required for the Braillex ib80-piezo Braille
reader made by F.H. Papenmeier (Germany).
- nosbagart [IA-64]
-
nosgx [X86-64,SGX] Disables Intel SGX kernel support.
+ nosmap [PPC]
+ Disable SMAP (Supervisor Mode Access Prevention)
+ even if it is supported by processor.
+
+ nosmep [PPC64s]
+ Disable SMEP (Supervisor Mode Execution Prevention)
+ even if it is supported by processor.
+
nosmp [SMP] Tells an SMP kernel to act as a UP kernel,
and disable the IO APIC. legacy for "maxcpus=0".
+ nosmt [KNL,S390] Disable symmetric multithreading (SMT).
+ Equivalent to smt=1.
+
+ [KNL,X86] Disable symmetric multithreading (SMT).
+ nosmt=force: Force disable SMT, cannot be undone
+ via the sysfs control file.
+
nosoftlockup [KNL] Disable the soft-lockup detector.
+ nospec_store_bypass_disable
+ [HW] Disable all mitigations for the Speculative Store Bypass vulnerability
+
+ nospectre_bhb [ARM64] Disable all mitigations for Spectre-BHB (branch
+ history injection) vulnerability. System may allow data leaks
+ with this option.
+
+ nospectre_v1 [X86,PPC] Disable mitigations for Spectre Variant 1
+ (bounds check bypass). With this option data leaks are
+ possible in the system.
+
+ nospectre_v2 [X86,PPC_E500,ARM64] Disable all mitigations for
+ the Spectre variant 2 (indirect branch prediction)
+ vulnerability. System may allow data leaks with this
+ option.
+
+ no-steal-acc [X86,PV_OPS,ARM64,PPC/PSERIES] Disable paravirtualized
+ steal time accounting. steal time is computed, but
+ won't influence scheduler behaviour
+
nosync [HW,M68K] Disables sync negotiation for all devices.
+ no_timer_check [X86,APIC] Disables the code which tests for
+ broken timer IRQ sources.
+
+ no_uaccess_flush
+ [PPC] Don't flush the L1-D cache after accessing user data.
+
+ novmcoredd [KNL,KDUMP]
+ Disable device dump. Device dump allows drivers to
+ append dump data to vmcore so you can collect driver
+ specified debug info. Drivers can append the data
+ without any limit and this data is stored in memory,
+ so this may cause significant memory stress. Disabling
+ device dump can help save memory but the driver debug
+ data will be no longer available. This parameter
+ is only available when CONFIG_PROC_VMCORE_DEVICE_DUMP
+ is set.
+
+ no-vmw-sched-clock
+ [X86,PV_OPS] Disable paravirtualized VMware scheduler
+ clock and use the default one.
+
nowatchdog [KNL] Disable both lockup detectors, i.e.
soft-lockup and NMI watchdog (hard-lockup).
LEGACY_XAPIC_DISABLED bit set in the
IA32_XAPIC_DISABLE_STATUS MSR.
+ noxsave [BUGS=X86] Disables x86 extended register state save
+ and restore using xsave. The kernel will fallback to
+ enabling legacy floating-point and sse state.
+
+ noxsaveopt [X86] Disables xsaveopt used in saving x86 extended
+ register states. The kernel will fall back to use
+ xsave to save the states. By using this parameter,
+ performance of saving the states is degraded because
+ xsave doesn't support modified optimization while
+ xsaveopt supports it on xsaveopt enabled systems.
+
+ noxsaves [X86] Disables xsaves and xrstors used in saving and
+ restoring x86 extended register state in compacted
+ form of xsave area. The kernel will fall back to use
+ xsaveopt and xrstor to save and restore the states
+ in standard form of xsave area. By using this
+ parameter, xsave area per process might occupy more
+ memory on xsaves enabled systems.
+
nps_mtm_hs_ctr= [KNL,ARC]
This parameter sets the maximum duration, in
cycles, each HW thread of the CTOP can run
Not specifying this option is equivalent to pti=auto.
- nopti [X86-64]
- Equivalent to pti=off
-
pty.legacy_count=
[KNL] Number of legacy pty's. Overwrites compiled-in
default number.
OSDN Git Service
