ARM: dts: msm: Add sdhc2 for sdm630 QRD

Add sdhc2 to enable sd card for sdm630 QRD platform.

CRs-Fixed: 2005013
Change-Id: I3c88e1b80d36482b8f5563381656556d30a36f4c
Signed-off-by: xiaonian <xiaonian@codeaurora.org>

diff --git a/arch/arm/boot/dts/qcom/sdm630-qrd.dtsi b/arch/arm/boot/dts/qcom/sdm630-qrd.dtsi
index cfac30c..59afb99 100644 (file)
--- a/arch/arm/boot/dts/qcom/sdm630-qrd.dtsi
+++ b/arch/arm/boot/dts/qcom/sdm630-qrd.dtsi
@@ -67,5 +67,38 @@
        status = "ok";
 };
 
+&sdhc_2 {
+       /* device core power supply */
+       vdd-supply = <&pm660l_l5>;
+       qcom,vdd-voltage-level = <2950000 2950000>;
+       qcom,vdd-current-level = <15000 800000>;
+
+       /* device communication power supply */
+       vdd-io-supply = <&pm660l_l2>;
+       qcom,vdd-io-voltage-level = <1800000 2950000>;
+       qcom,vdd-io-current-level = <200 22000>;
+
+       pinctrl-names = "active", "sleep";
+       pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+       pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+       #address-cells = <0>;
+       interrupt-parent = <&sdhc_2>;
+       interrupts = <0 1 2>;
+       #interrupt-cells = <1>;
+       interrupt-map-mask = <0xffffffff>;
+       interrupt-map = <0 &intc 0 0 125 0
+                       1 &intc 0 0 221 0
+                       2 &tlmm 54 0>;
+       interrupt-names = "hc_irq", "pwr_irq", "status_irq";
+       cd-gpios = <&tlmm 54 0x1>;
+
+       qcom,clk-rates = <400000 20000000 25000000 50000000 100000000
+                                                               200000000>;
+       qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
+
+       status = "ok";
+};
+
 &soc {
 };