OSDN Git Service

b43: Add definitions for MAC Control register
authorMichael Buesch <mb@bu3sch.de>
Wed, 26 Dec 2007 15:26:36 +0000 (16:26 +0100)
committerDavid S. Miller <davem@davemloft.net>
Mon, 28 Jan 2008 23:09:17 +0000 (15:09 -0800)
This adds some definitions for the MAC Control register
and uses them.
This basically is no functional change.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/b43/b43.h
drivers/net/wireless/b43/main.c

index 104d0b2..c19b773 100644 (file)
@@ -35,8 +35,8 @@
 #define B43_MMIO_DMA4_IRQ_MASK         0x44
 #define B43_MMIO_DMA5_REASON           0x48
 #define B43_MMIO_DMA5_IRQ_MASK         0x4C
-#define B43_MMIO_MACCTL                        0x120
-#define B43_MMIO_STATUS2_BITFIELD      0x124
+#define B43_MMIO_MACCTL                        0x120   /* MAC control */
+#define B43_MMIO_MACCMD                        0x124   /* MAC command */
 #define B43_MMIO_GEN_IRQ_REASON                0x128
 #define B43_MMIO_GEN_IRQ_MASK          0x12C
 #define B43_MMIO_RAM_CONTROL           0x130
@@ -321,6 +321,13 @@ enum {
 #define B43_MACCTL_DISCPMQ             0x40000000      /* Discard Power Management Queue */
 #define B43_MACCTL_GMODE               0x80000000      /* G Mode */
 
+/* MAC Command bitfield */
+#define B43_MACCMD_BEACON0_VALID       0x00000001      /* Beacon 0 in template RAM is busy/valid */
+#define B43_MACCMD_BEACON1_VALID       0x00000002      /* Beacon 1 in template RAM is busy/valid */
+#define B43_MACCMD_DFQ_VALID           0x00000004      /* Directed frame queue valid (IBSS PS mode, ATIM) */
+#define B43_MACCMD_CCA                 0x00000008      /* Clear channel assessment */
+#define B43_MACCMD_BGNOISE             0x00000010      /* Background noise */
+
 /* 802.11 core specific TM State Low flags */
 #define B43_TMSLOW_GMODE               0x20000000      /* G Mode Enable */
 #define B43_TMSLOW_PLLREFSEL           0x00200000      /* PLL Frequency Reference Select */
@@ -693,7 +700,7 @@ struct b43_wldev {
        int suspend_init_status;
 
        bool bad_frames_preempt;        /* Use "Bad Frames Preemption" (default off) */
-       bool reg124_set_0x4;    /* Some variable to keep track of IRQ stuff. */
+       bool dfq_valid;         /* Directed frame queue valid (IBSS PS mode, ATIM) */
        bool short_preamble;    /* TRUE, if short preamble is enabled. */
        bool short_slot;        /* TRUE, if short slot timing is enabled. */
        bool radio_hw_enable;   /* saved state of radio hardware enabled state */
index 2add839..62e4b63 100644 (file)
@@ -993,9 +993,8 @@ static void b43_jssi_write(struct b43_wldev *dev, u32 jssi)
 static void b43_generate_noise_sample(struct b43_wldev *dev)
 {
        b43_jssi_write(dev, 0x7F7F7F7F);
-       b43_write32(dev, B43_MMIO_STATUS2_BITFIELD,
-                   b43_read32(dev, B43_MMIO_STATUS2_BITFIELD)
-                   | (1 << 4));
+       b43_write32(dev, B43_MMIO_MACCMD,
+                   b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE);
        B43_WARN_ON(dev->noisecalc.channel_at_start != dev->phy.channel);
 }
 
@@ -1081,18 +1080,18 @@ static void handle_irq_tbtt_indication(struct b43_wldev *dev)
                if (1 /*FIXME: the last PSpoll frame was sent successfully */ )
                        b43_power_saving_ctl_bits(dev, 0);
        }
-       dev->reg124_set_0x4 = 0;
        if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS))
-               dev->reg124_set_0x4 = 1;
+               dev->dfq_valid = 1;
 }
 
 static void handle_irq_atim_end(struct b43_wldev *dev)
 {
-       if (!dev->reg124_set_0x4 /*FIXME rename this variable */ )
-               return;
-       b43_write32(dev, B43_MMIO_STATUS2_BITFIELD,
-                   b43_read32(dev, B43_MMIO_STATUS2_BITFIELD)
-                   | 0x4);
+       if (dev->dfq_valid) {
+               b43_write32(dev, B43_MMIO_MACCMD,
+                           b43_read32(dev, B43_MMIO_MACCMD)
+                           | B43_MACCMD_DFQ_VALID);
+               dev->dfq_valid = 0;
+       }
 }
 
 static void handle_irq_pmq(struct b43_wldev *dev)
@@ -1271,7 +1270,7 @@ static int b43_refresh_cached_beacon(struct b43_wldev *dev,
 
 static void b43_update_templates(struct b43_wldev *dev)
 {
-       u32 status;
+       u32 cmd;
 
        B43_WARN_ON(!dev->cached_beacon);
 
@@ -1279,9 +1278,9 @@ static void b43_update_templates(struct b43_wldev *dev)
        b43_write_beacon_template(dev, 0x468, 0x1A, B43_CCK_RATE_1MB);
        b43_write_probe_resp_template(dev, 0x268, 0x4A, B43_CCK_RATE_11MB);
 
-       status = b43_read32(dev, B43_MMIO_STATUS2_BITFIELD);
-       status |= 0x03;
-       b43_write32(dev, B43_MMIO_STATUS2_BITFIELD, status);
+       cmd = b43_read32(dev, B43_MMIO_MACCMD);
+       cmd |= B43_MACCMD_BEACON0_VALID | B43_MACCMD_BEACON1_VALID;
+       b43_write32(dev, B43_MMIO_MACCMD, cmd);
 }
 
 static void b43_refresh_templates(struct b43_wldev *dev, struct sk_buff *beacon)
@@ -1333,7 +1332,7 @@ static void handle_irq_beacon(struct b43_wldev *dev)
                return;
 
        dev->irq_savedstate &= ~B43_IRQ_BEACON;
-       status = b43_read32(dev, B43_MMIO_STATUS2_BITFIELD);
+       status = b43_read32(dev, B43_MMIO_MACCMD);
 
        if (!dev->cached_beacon || ((status & 0x1) && (status & 0x2))) {
                /* ACK beacon IRQ. */
@@ -1347,12 +1346,12 @@ static void handle_irq_beacon(struct b43_wldev *dev)
        if (!(status & 0x1)) {
                b43_write_beacon_template(dev, 0x68, 0x18, B43_CCK_RATE_1MB);
                status |= 0x1;
-               b43_write32(dev, B43_MMIO_STATUS2_BITFIELD, status);
+               b43_write32(dev, B43_MMIO_MACCMD, status);
        }
        if (!(status & 0x2)) {
                b43_write_beacon_template(dev, 0x468, 0x1A, B43_CCK_RATE_1MB);
                status |= 0x2;
-               b43_write32(dev, B43_MMIO_STATUS2_BITFIELD, status);
+               b43_write32(dev, B43_MMIO_MACCMD, status);
        }
 }
 
@@ -3177,8 +3176,8 @@ static void setup_struct_phy_for_init(struct b43_wldev *dev,
 
 static void setup_struct_wldev_for_init(struct b43_wldev *dev)
 {
-       /* Flags */
-       dev->reg124_set_0x4 = 0;
+       dev->dfq_valid = 0;
+
        /* Assume the radio is enabled. If it's not enabled, the state will
         * immediately get fixed on the first periodic work run. */
        dev->radio_hw_enable = 1;