SCU_AST2500_HW_STRAP_ACPI_ENABLE | \
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
+/* Swift hardware value: 0xF11AD206 */
+#define SWIFT_BMC_HW_STRAP1 ( \
+ AST2500_HW_STRAP1_DEFAULTS | \
+ SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
+ SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
+ SCU_AST2500_HW_STRAP_UART_DEBUG | \
+ SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
+ SCU_H_PLL_BYPASS_EN | \
+ SCU_AST2500_HW_STRAP_ACPI_ENABLE | \
+ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
+
/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
#define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
}
+static void swift_bmc_i2c_init(AspeedBoardState *bmc)
+{
+ AspeedSoCState *soc = &bmc->soc;
+
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60);
+
+ /* The swift board expects a TMP275 but a TMP105 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48);
+ /* The swift board expects a pca9551 but a pca9552 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552", 0x60);
+
+ /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32);
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60);
+
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c);
+ /* The swift board expects a pca9539 but a pca9552 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552", 0x74);
+
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423", 0x4c);
+ /* The swift board expects a pca9539 but a pca9552 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552",
+ 0x74);
+
+ /* The swift board expects a TMP275 but a TMP105 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x48);
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x4a);
+}
+
static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
.i2c_init = romulus_bmc_i2c_init,
.ram = 512 * MiB,
}, {
+ .name = MACHINE_TYPE_NAME("swift-bmc"),
+ .desc = "OpenPOWER Swift BMC (ARM1176)",
+ .soc_name = "ast2500-a1",
+ .hw_strap1 = SWIFT_BMC_HW_STRAP1,
+ .fmc_model = "mx66l1g45g",
+ .spi_model = "mx66l1g45g",
+ .num_cs = 2,
+ .i2c_init = swift_bmc_i2c_init,
+ .ram = 512 * MiB,
+ }, {
.name = MACHINE_TYPE_NAME("witherspoon-bmc"),
.desc = "OpenPOWER Witherspoon BMC (ARM1176)",
.soc_name = "ast2500-a1",