drm/i915: All members of gen4 have hotplug, so unconditionally enable its irq

Also as we set the HOTPLUG_EN to 0 during pre-install, we can simply set
it during post-install, and nor do we wish to enable unwanted hotplug
events.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index cc4a633..e31515a 100644 (file)
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2320,10 +2320,8 @@ static void i965_irq_preinstall(struct drm_device * dev)
 
        atomic_set(&dev_priv->irq_received, 0);
 
-       if (I915_HAS_HOTPLUG(dev)) {
-               I915_WRITE(PORT_HOTPLUG_EN, 0);
-               I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
-       }
+       I915_WRITE(PORT_HOTPLUG_EN, 0);
+       I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
 
        I915_WRITE(HWSTAM, 0xeffe);
        for_each_pipe(pipe)
@@ -2336,11 +2334,13 @@ static void i965_irq_preinstall(struct drm_device * dev)
 static int i965_irq_postinstall(struct drm_device *dev)
 {
        drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+       u32 hotplug_en;
        u32 enable_mask;
        u32 error_mask;
 
        /* Unmask the interrupts that we always want on. */
        dev_priv->irq_mask = ~(I915_ASLE_INTERRUPT |
+                              I915_DISPLAY_PORT_INTERRUPT |
                               I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
                               I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
                               I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
@@ -2356,13 +2356,6 @@ static int i965_irq_postinstall(struct drm_device *dev)
        dev_priv->pipestat[0] = 0;
        dev_priv->pipestat[1] = 0;
 
-       if (I915_HAS_HOTPLUG(dev)) {
-               /* Enable in IER... */
-               enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
-               /* and unmask in IMR */
-               dev_priv->irq_mask &= ~I915_DISPLAY_PORT_INTERRUPT;
-       }
-
        /*
         * Enable some error detection, note the instruction error mask
         * bit is reserved, so we leave it masked.
@@ -2382,36 +2375,33 @@ static int i965_irq_postinstall(struct drm_device *dev)
        I915_WRITE(IER, enable_mask);
        POSTING_READ(IER);
 
-       if (I915_HAS_HOTPLUG(dev)) {
-               u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
-
-               /* Note HDMI and DP share bits */
-               if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
-                       hotplug_en |= HDMIB_HOTPLUG_INT_EN;
-               if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
-                       hotplug_en |= HDMIC_HOTPLUG_INT_EN;
-               if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
-                       hotplug_en |= HDMID_HOTPLUG_INT_EN;
-               if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
-                       hotplug_en |= SDVOC_HOTPLUG_INT_EN;
-               if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
-                       hotplug_en |= SDVOB_HOTPLUG_INT_EN;
-               if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
-                       hotplug_en |= CRT_HOTPLUG_INT_EN;
+       /* Note HDMI and DP share hotplug bits */
+       hotplug_en = 0;
+       if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
+               hotplug_en |= HDMIB_HOTPLUG_INT_EN;
+       if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
+               hotplug_en |= HDMIC_HOTPLUG_INT_EN;
+       if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
+               hotplug_en |= HDMID_HOTPLUG_INT_EN;
+       if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
+               hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+       if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
+               hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+       if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
+               hotplug_en |= CRT_HOTPLUG_INT_EN;
 
-                       /* Programming the CRT detection parameters tends
-                          to generate a spurious hotplug event about three
-                          seconds later.  So just do it once.
-                       */
-                       if (IS_G4X(dev))
-                               hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
-                       hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
-               }
+               /* Programming the CRT detection parameters tends
+                  to generate a spurious hotplug event about three
+                  seconds later.  So just do it once.
+                  */
+               if (IS_G4X(dev))
+                       hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+               hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+       }
 
-               /* Ignore TV since it's buggy */
+       /* Ignore TV since it's buggy */
 
-               I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-       }
+       I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
 
        intel_opregion_enable_asle(dev);
 
@@ -2469,8 +2459,7 @@ static irqreturn_t i965_irq_handler(DRM_IRQ_ARGS)
                ret = IRQ_HANDLED;
 
                /* Consume port.  Then clear IIR or we'll miss events */
-               if ((I915_HAS_HOTPLUG(dev)) &&
-                   (iir & I915_DISPLAY_PORT_INTERRUPT)) {
+               if (iir & I915_DISPLAY_PORT_INTERRUPT) {
                        u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
 
                        DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
@@ -2543,10 +2532,8 @@ static void i965_irq_uninstall(struct drm_device * dev)
        if (!dev_priv)
                return;
 
-       if (I915_HAS_HOTPLUG(dev)) {
-               I915_WRITE(PORT_HOTPLUG_EN, 0);
-               I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
-       }
+       I915_WRITE(PORT_HOTPLUG_EN, 0);
+       I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
 
        I915_WRITE(HWSTAM, 0xffffffff);
        for_each_pipe(pipe)