media: i2c: ov9282: Add HFLIP and VFLIP support

Adds support for V4L2_CID_HFLIP and V4L2_CID_VFLIP to allow
flipping the image.

The driver previously enabled H & V flips in the register table,
therefore the controls default to the same settings to avoid
changing the behaviour.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
index e964461..cfb6e72 100644 (file)
--- a/drivers/media/i2c/ov9282.c
+++ b/drivers/media/i2c/ov9282.c
@@ -45,6 +45,10 @@
 /* Group hold register */
 #define OV9282_REG_HOLD                0x3308
 
+#define OV9282_REG_TIMING_FORMAT_1     0x3820
+#define OV9282_REG_TIMING_FORMAT_2     0x3821
+#define OV9282_FLIP_BIT                        BIT(2)
+
 #define OV9282_REG_MIPI_CTRL00 0x4800
 #define OV9282_GATED_CLOCK     BIT(5)
 
@@ -438,6 +442,40 @@ error_release_group_hold:
        return ret;
 }
 
+static int ov9282_set_ctrl_hflip(struct ov9282 *ov9282, int value)
+{
+       u32 current_val;
+       int ret = ov9282_read_reg(ov9282, OV9282_REG_TIMING_FORMAT_2, 1,
+                                 &current_val);
+       if (ret)
+               return ret;
+
+       if (value)
+               current_val |= OV9282_FLIP_BIT;
+       else
+               current_val &= ~OV9282_FLIP_BIT;
+
+       return ov9282_write_reg(ov9282, OV9282_REG_TIMING_FORMAT_2, 1,
+                               current_val);
+}
+
+static int ov9282_set_ctrl_vflip(struct ov9282 *ov9282, int value)
+{
+       u32 current_val;
+       int ret = ov9282_read_reg(ov9282, OV9282_REG_TIMING_FORMAT_1, 1,
+                                 &current_val);
+       if (ret)
+               return ret;
+
+       if (value)
+               current_val |= OV9282_FLIP_BIT;
+       else
+               current_val &= ~OV9282_FLIP_BIT;
+
+       return ov9282_write_reg(ov9282, OV9282_REG_TIMING_FORMAT_1, 1,
+                               current_val);
+}
+
 /**
  * ov9282_set_ctrl() - Set subdevice control
  * @ctrl: pointer to v4l2_ctrl structure
@@ -494,6 +532,12 @@ static int ov9282_set_ctrl(struct v4l2_ctrl *ctrl)
                lpfr = ov9282->vblank + ov9282->cur_mode->height;
                ret = ov9282_write_reg(ov9282, OV9282_REG_LPFR, 2, lpfr);
                break;
+       case V4L2_CID_HFLIP:
+               ret = ov9282_set_ctrl_hflip(ov9282, ctrl->val);
+               break;
+       case V4L2_CID_VFLIP:
+               ret = ov9282_set_ctrl_vflip(ov9282, ctrl->val);
+               break;
        default:
                dev_err(ov9282->dev, "Invalid control %d", ctrl->id);
                ret = -EINVAL;
@@ -963,7 +1007,7 @@ static int ov9282_init_controls(struct ov9282 *ov9282)
        u32 lpfr;
        int ret;
 
-       ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
+       ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10);
        if (ret)
                return ret;
 
@@ -997,6 +1041,12 @@ static int ov9282_init_controls(struct ov9282 *ov9282)
                                                mode->vblank_max,
                                                1, mode->vblank);
 
+       v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_VFLIP,
+                         0, 1, 1, 1);
+
+       v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_HFLIP,
+                         0, 1, 1, 1);
+
        /* Read only controls */
        v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_PIXEL_RATE,
                          OV9282_PIXEL_RATE, OV9282_PIXEL_RATE, 1,