#include <usb_ops.h>
static void phy_SsPwrSwitch92CU(struct rtw_adapter *Adapter,
- enum rt_rf_power_state eRFPowerState,
- int bRegSSPwrLvl);
+ enum rt_rf_power_state eRFPowerState);
static void
_ConfigChipOutEP(struct rtw_adapter *pAdapter, u8 NumOutPipe)
Adapter->hw_init_completed = false;
if (Adapter->pwrctrlpriv.bkeepfwalive) {
- /* here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2
- needs to be verified */
- phy_SsPwrSwitch92CU(Adapter, rf_on, 1);
+ phy_SsPwrSwitch92CU(Adapter, rf_on);
if (pHalData->bIQKInitialized) {
rtl8723a_phy_iq_calibrate(Adapter, true);
}
static void phy_SsPwrSwitch92CU(struct rtw_adapter *Adapter,
- enum rt_rf_power_state eRFPowerState,
- int bRegSSPwrLvl)
+ enum rt_rf_power_state eRFPowerState)
{
struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
- u8 value8, sps0;
- u8 bytetmp;
+ u8 sps0;
sps0 = rtl8723au_read8(Adapter, REG_SPS0_CTRL);
switch (eRFPowerState) {
case rf_on:
- if (bRegSSPwrLvl == 1) {
- /* 1. Enable MAC Clock. Can not be enabled now. */
- /* WriteXBYTE(REG_SYS_CLKR+1,
- ReadXBYTE(REG_SYS_CLKR+1) | BIT(3)); */
-
- /* 2. Force PWM, Enable SPS18_LDO_Marco_Block */
- rtl8723au_write8(Adapter, REG_SPS0_CTRL,
- sps0 | BIT(0) | BIT(3));
-
- /* 3. restore BB, AFE control register. */
- /* RF */
- if (pHalData->rf_type == RF_2T2R)
- PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
- 0x380038, 1);
- else
- PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
- 0x38, 1);
- PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 1);
- PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT(1), 0);
-
- /* AFE */
- if (pHalData->rf_type == RF_2T2R)
- PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord,
- 0x63DB25A0);
- else if (pHalData->rf_type == RF_1T1R)
- PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord,
- 0x631B25A0);
-
- /* 4. issue 3-wire command that RF set to Rx idle
- mode. This is used to re-write the RX idle mode. */
- /* We can only prvide a usual value instead and then
- HW will modify the value by itself. */
- PHY_SetRFReg(Adapter, RF_PATH_A, 0,
- bRFRegOffsetMask, 0x32D95);
- if (pHalData->rf_type == RF_2T2R) {
- PHY_SetRFReg(Adapter, RF_PATH_B, 0,
- bRFRegOffsetMask, 0x32D95);
- }
- } else { /* Level 2 or others. */
- /* h. AFE_PLL_CTRL 0x28[7:0] = 0x80
- disable AFE PLL */
- rtl8723au_write8(Adapter, REG_AFE_PLL_CTRL, 0x81);
-
- /* i. AFE_XTAL_CTRL 0x24[15:0] = 0x880F
- gated AFE DIG_CLOCK */
- rtl8723au_write16(Adapter, REG_AFE_XTAL_CTRL, 0x800F);
- mdelay(1);
-
- /* 2. Force PWM, Enable SPS18_LDO_Marco_Block */
- rtl8723au_write8(Adapter, REG_SPS0_CTRL,
- sps0 | BIT(0) | BIT(3));
-
- /* 3. restore BB, AFE control register. */
- /* RF */
- if (pHalData->rf_type == RF_2T2R)
- PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
- 0x380038, 1);
- else
- PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
- 0x38, 1);
- PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 1);
- PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT(1), 0);
-
- /* AFE */
- if (pHalData->rf_type == RF_2T2R)
- PHY_SetBBReg(Adapter, rRx_Wait_CCA,
- bMaskDWord, 0x63DB25A0);
- else if (pHalData->rf_type == RF_1T1R)
- PHY_SetBBReg(Adapter, rRx_Wait_CCA,
- bMaskDWord, 0x631B25A0);
-
- /* 4. issue 3-wire command that RF set to Rx idle
- mode. This is used to re-write the RX idle mode. */
- /* We can only prvide a usual value instead and
- then HW will modify the value by itself. */
- PHY_SetRFReg(Adapter, RF_PATH_A, 0,
+ /* 1. Enable MAC Clock. Can not be enabled now. */
+ /* WriteXBYTE(REG_SYS_CLKR+1,
+ ReadXBYTE(REG_SYS_CLKR+1) | BIT(3)); */
+
+ /* 2. Force PWM, Enable SPS18_LDO_Marco_Block */
+ rtl8723au_write8(Adapter, REG_SPS0_CTRL,
+ sps0 | BIT(0) | BIT(3));
+
+ /* 3. restore BB, AFE control register. */
+ /* RF */
+ if (pHalData->rf_type == RF_2T2R)
+ PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
+ 0x380038, 1);
+ else
+ PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
+ 0x38, 1);
+ PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 1);
+ PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT(1), 0);
+
+ /* AFE */
+ if (pHalData->rf_type == RF_2T2R)
+ PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord,
+ 0x63DB25A0);
+ else if (pHalData->rf_type == RF_1T1R)
+ PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord,
+ 0x631B25A0);
+
+ /* 4. issue 3-wire command that RF set to Rx idle
+ mode. This is used to re-write the RX idle mode. */
+ /* We can only prvide a usual value instead and then
+ HW will modify the value by itself. */
+ PHY_SetRFReg(Adapter, RF_PATH_A, 0, bRFRegOffsetMask, 0x32D95);
+ if (pHalData->rf_type == RF_2T2R) {
+ PHY_SetRFReg(Adapter, RF_PATH_B, 0,
bRFRegOffsetMask, 0x32D95);
- if (pHalData->rf_type == RF_2T2R) {
- PHY_SetRFReg(Adapter, RF_PATH_B, 0,
- bRFRegOffsetMask, 0x32D95);
- }
-
- /* 5. gated MAC Clock */
- bytetmp = rtl8723au_read8(Adapter, REG_APSD_CTRL);
- rtl8723au_write8(Adapter, REG_APSD_CTRL,
- bytetmp & ~BIT(6));
-
- mdelay(10);
-
- /* Set BB reset at first */
- /* 0x16 */
- rtl8723au_write8(Adapter, REG_SYS_FUNC_EN, 0x17);
-
- /* Enable TX */
- rtl8723au_write8(Adapter, REG_TXPAUSE, 0x0);
}
break;
case rf_sleep:
sps0 &= ~BIT(0);
else
sps0 &= ~(BIT(0) | BIT(3));
- if (bRegSSPwrLvl == 1) {
- RT_TRACE(_module_hal_init_c_, _drv_err_, ("SS LVL1\n"));
- /* Disable RF and BB only for SelectSuspend. */
-
- /* 1. Set BB/RF to shutdown. */
- /* (1) Reg878[5:3]= 0 RF rx_code for
- preamble power saving */
- /* (2)Reg878[21:19]= 0 Turn off RF-B */
- /* (3) RegC04[7:4]= 0 Turn off all paths
- for packet detection */
- /* (4) Reg800[1] = 1 enable preamble power
- saving */
- Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF0] =
- PHY_QueryBBReg(Adapter, rFPGA0_XAB_RFParameter,
- bMaskDWord);
- Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF1] =
- PHY_QueryBBReg(Adapter, rOFDM0_TRxPathEnable,
- bMaskDWord);
- Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF2] =
- PHY_QueryBBReg(Adapter, rFPGA0_RFMOD,
- bMaskDWord);
- if (pHalData->rf_type == RF_2T2R) {
- PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
- 0x380038, 0);
- } else if (pHalData->rf_type == RF_1T1R) {
- PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
- 0x38, 0);
- }
- PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 0);
- PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT(1), 1);
-
- /* 2 .AFE control register to power down. bit[30:22] */
- Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_AFE0] =
- PHY_QueryBBReg(Adapter, rRx_Wait_CCA,
- bMaskDWord);
- if (pHalData->rf_type == RF_2T2R)
- PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord,
- 0x00DB25A0);
- else if (pHalData->rf_type == RF_1T1R)
- PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord,
- 0x001B25A0);
-
- /* 3. issue 3-wire command that RF set to power down.*/
- PHY_SetRFReg(Adapter, RF_PATH_A, 0, bRFRegOffsetMask, 0);
- if (pHalData->rf_type == RF_2T2R)
- PHY_SetRFReg(Adapter, RF_PATH_B, 0,
- bRFRegOffsetMask, 0);
-
- /* 4. Force PFM , disable SPS18_LDO_Marco_Block */
- rtl8723au_write8(Adapter, REG_SPS0_CTRL, sps0);
- } else { /* Level 2 or others. */
- RT_TRACE(_module_hal_init_c_, _drv_err_, ("SS LVL2\n"));
- {
- u8 eRFPath = RF_PATH_A, value8 = 0;
- rtl8723au_write8(Adapter, REG_TXPAUSE, 0xFF);
- PHY_SetRFReg(Adapter,
- (enum RF_RADIO_PATH)eRFPath,
- 0x0, bMaskByte0, 0x0);
- value8 |= APSDOFF;
- /* 0x40 */
- rtl8723au_write8(Adapter, REG_APSD_CTRL,
- value8);
-
- /* After switch APSD, we need to delay
- for stability */
- mdelay(10);
-
- /* Set BB reset at first */
- value8 = 0;
- value8 |= (FEN_USBD | FEN_USBA |
- FEN_BB_GLB_RSTn);
- /* 0x16 */
- rtl8723au_write8(Adapter, REG_SYS_FUNC_EN,
- value8);
- }
-
- /* Disable RF and BB only for SelectSuspend. */
-
- /* 1. Set BB/RF to shutdown. */
- /* (1) Reg878[5:3]= 0 RF rx_code for
- preamble power saving */
- /* (2)Reg878[21:19]= 0 Turn off RF-B */
- /* (3) RegC04[7:4]= 0 Turn off all paths for
- packet detection */
- /* (4) Reg800[1] = 1 enable preamble power
- saving */
- Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF0] =
- PHY_QueryBBReg(Adapter, rFPGA0_XAB_RFParameter,
- bMaskDWord);
- Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF1] =
- PHY_QueryBBReg(Adapter, rOFDM0_TRxPathEnable,
- bMaskDWord);
- Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF2] =
- PHY_QueryBBReg(Adapter, rFPGA0_RFMOD,
- bMaskDWord);
- if (pHalData->rf_type == RF_2T2R)
- PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
- 0x380038, 0);
- else if (pHalData->rf_type == RF_1T1R)
- PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
- 0x38, 0);
- PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 0);
- PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT(1), 1);
-
- /* 2 .AFE control register to power down. bit[30:22] */
- Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_AFE0] =
- PHY_QueryBBReg(Adapter, rRx_Wait_CCA,
- bMaskDWord);
- if (pHalData->rf_type == RF_2T2R)
- PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord,
- 0x00DB25A0);
- else if (pHalData->rf_type == RF_1T1R)
- PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord,
- 0x001B25A0);
-
- /* 3. issue 3-wire command that RF set to power down. */
- PHY_SetRFReg(Adapter, RF_PATH_A, 0, bRFRegOffsetMask, 0);
- if (pHalData->rf_type == RF_2T2R)
- PHY_SetRFReg(Adapter, RF_PATH_B, 0,
- bRFRegOffsetMask, 0);
-
- /* 4. Force PFM , disable SPS18_LDO_Marco_Block */
- rtl8723au_write8(Adapter, REG_SPS0_CTRL, sps0);
-
- /* 2010/10/13 MH/Isaachsu exchange sequence. */
- /* h. AFE_PLL_CTRL 0x28[7:0] = 0x80
- disable AFE PLL */
- rtl8723au_write8(Adapter, REG_AFE_PLL_CTRL, 0x80);
- mdelay(1);
-
- /* i. AFE_XTAL_CTRL 0x24[15:0] = 0x880F
- gated AFE DIG_CLOCK */
- rtl8723au_write16(Adapter, REG_AFE_XTAL_CTRL, 0xA80F);
+
+ RT_TRACE(_module_hal_init_c_, _drv_err_, ("SS LVL1\n"));
+ /* Disable RF and BB only for SelectSuspend. */
+
+ /* 1. Set BB/RF to shutdown. */
+ /* (1) Reg878[5:3]= 0 RF rx_code for
+ preamble power saving */
+ /* (2)Reg878[21:19]= 0 Turn off RF-B */
+ /* (3) RegC04[7:4]= 0 Turn off all paths
+ for packet detection */
+ /* (4) Reg800[1] = 1 enable preamble power saving */
+ Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF0] =
+ PHY_QueryBBReg(Adapter, rFPGA0_XAB_RFParameter,
+ bMaskDWord);
+ Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF1] =
+ PHY_QueryBBReg(Adapter, rOFDM0_TRxPathEnable,
+ bMaskDWord);
+ Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF2] =
+ PHY_QueryBBReg(Adapter, rFPGA0_RFMOD, bMaskDWord);
+ if (pHalData->rf_type == RF_2T2R) {
+ PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
+ 0x380038, 0);
+ } else if (pHalData->rf_type == RF_1T1R) {
+ PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x38, 0);
}
+ PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 0);
+ PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT(1), 1);
+
+ /* 2 .AFE control register to power down. bit[30:22] */
+ Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_AFE0] =
+ PHY_QueryBBReg(Adapter, rRx_Wait_CCA, bMaskDWord);
+ if (pHalData->rf_type == RF_2T2R)
+ PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord,
+ 0x00DB25A0);
+ else if (pHalData->rf_type == RF_1T1R)
+ PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord,
+ 0x001B25A0);
+
+ /* 3. issue 3-wire command that RF set to power down.*/
+ PHY_SetRFReg(Adapter, RF_PATH_A, 0, bRFRegOffsetMask, 0);
+ if (pHalData->rf_type == RF_2T2R)
+ PHY_SetRFReg(Adapter, RF_PATH_B, 0,
+ bRFRegOffsetMask, 0);
+
+ /* 4. Force PFM , disable SPS18_LDO_Marco_Block */
+ rtl8723au_write8(Adapter, REG_SPS0_CTRL, sps0);
break;
default:
break;
}
-
-} /* phy_PowerSwitch92CU */
+}
static void CardDisableRTL8723U(struct rtw_adapter *Adapter)
{
OSDN Git Service
