drm/i915/i2c: The bit-banging interface controls the delay, drop ours

Remove our redundant udelay() as the timings are already handled by the
i2c-algo-bit controller.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index c2649c7..de03989 100644 (file)
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -38,16 +38,18 @@
 void intel_i2c_quirk_set(struct drm_device *dev, bool enable)
 {
        struct drm_i915_private *dev_priv = dev->dev_private;
+       u32 val;
 
        /* When using bit bashing for I2C, this bit needs to be set to 1 */
        if (!IS_PINEVIEW(dev))
                return;
+
+       val = I915_READ(DSPCLK_GATE_D);
        if (enable)
-               I915_WRITE(DSPCLK_GATE_D,
-                       I915_READ(DSPCLK_GATE_D) | DPCUNIT_CLOCK_GATE_DISABLE);
+               val |= DPCUNIT_CLOCK_GATE_DISABLE;
        else
-               I915_WRITE(DSPCLK_GATE_D,
-                       I915_READ(DSPCLK_GATE_D) & (~DPCUNIT_CLOCK_GATE_DISABLE));
+               val &= ~DPCUNIT_CLOCK_GATE_DISABLE;
+       I915_WRITE(DSPCLK_GATE_D, val);
 }
 
 /*
@@ -60,20 +62,14 @@ static int get_clock(void *data)
 {
        struct intel_i2c_chan *chan = data;
        struct drm_i915_private *dev_priv = chan->drm_dev->dev_private;
-       u32 val;
-
-       val = I915_READ(chan->reg);
-       return ((val & GPIO_CLOCK_VAL_IN) != 0);
+       return (I915_READ(chan->reg) & GPIO_CLOCK_VAL_IN) != 0;
 }
 
 static int get_data(void *data)
 {
        struct intel_i2c_chan *chan = data;
        struct drm_i915_private *dev_priv = chan->drm_dev->dev_private;
-       u32 val;
-
-       val = I915_READ(chan->reg);
-       return ((val & GPIO_DATA_VAL_IN) != 0);
+       return (I915_READ(chan->reg) & GPIO_DATA_VAL_IN) != 0;
 }
 
 static void set_clock(void *data, int state_high)
@@ -94,7 +90,7 @@ static void set_clock(void *data, int state_high)
                clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK |
                        GPIO_CLOCK_VAL_MASK;
        I915_WRITE(chan->reg, reserved | clock_bits);
-       udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */
+       POSTING_READ(chan->reg);
 }
 
 static void set_data(void *data, int state_high)
@@ -116,7 +112,7 @@ static void set_data(void *data, int state_high)
                        GPIO_DATA_VAL_MASK;
 
        I915_WRITE(chan->reg, reserved | data_bits);
-       udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */
+       POSTING_READ(chan->reg);
 }
 
 /* Clears the GMBUS setup.  Our driver doesn't make use of the GMBUS I2C
@@ -129,11 +125,10 @@ intel_i2c_reset_gmbus(struct drm_device *dev)
 {
        struct drm_i915_private *dev_priv = dev->dev_private;
 
-       if (HAS_PCH_SPLIT(dev)) {
+       if (HAS_PCH_SPLIT(dev))
                I915_WRITE(PCH_GMBUS0, 0);
-       } else {
+       else
                I915_WRITE(GMBUS0, 0);
-       }
 }
 
 /**
@@ -177,7 +172,7 @@ struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
        chan->algo.setscl = set_clock;
        chan->algo.getsda = get_data;
        chan->algo.getscl = get_clock;
-       chan->algo.udelay = 20;
+       chan->algo.udelay = I2C_RISEFALL_TIME;
        chan->algo.timeout = usecs_to_jiffies(2200);
        chan->algo.data = chan;
 
@@ -191,9 +186,10 @@ struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
        /* JJJ:  raise SCL and SDA? */
        intel_i2c_quirk_set(dev, true);
        set_data(chan, 1);
+       udelay(I2C_RISEFALL_TIME);
        set_clock(chan, 1);
+       udelay(I2C_RISEFALL_TIME);
        intel_i2c_quirk_set(dev, false);
-       udelay(20);
 
        return &chan->adapter;