* @bam_ce - the array of BAM command elements
* @cmd_sgl - sgl for NAND BAM command pipe
* @data_sgl - sgl for NAND BAM consumer/producer pipe
+ * @last_data_desc - last DMA desc in data channel (tx/rx).
+ * @last_cmd_desc - last DMA desc in command channel.
+ * @txn_done - completion for NAND transfer.
* @bam_ce_pos - the index in bam_ce which is available for next sgl
* @bam_ce_start - the index in bam_ce which marks the start position ce
* for current sgl. It will be used for size calculation
* @rx_sgl_start - start index in data sgl for rx.
* @wait_second_completion - wait for second DMA desc completion before making
* the NAND transfer completion.
- * @txn_done - completion for NAND transfer.
- * @last_data_desc - last DMA desc in data channel (tx/rx).
- * @last_cmd_desc - last DMA desc in command channel.
*/
struct bam_transaction {
struct bam_cmd_element *bam_ce;
struct scatterlist *cmd_sgl;
struct scatterlist *data_sgl;
+ struct dma_async_tx_descriptor *last_data_desc;
+ struct dma_async_tx_descriptor *last_cmd_desc;
+ struct completion txn_done;
u32 bam_ce_pos;
u32 bam_ce_start;
u32 cmd_sgl_pos;
u32 rx_sgl_pos;
u32 rx_sgl_start;
bool wait_second_completion;
- struct completion txn_done;
- struct dma_async_tx_descriptor *last_data_desc;
- struct dma_async_tx_descriptor *last_cmd_desc;
};
/*
* This data type corresponds to the nand dma descriptor
+ * @dma_desc - low level DMA engine descriptor
* @list - list for desc_info
- * @dir - DMA transfer direction
+ *
* @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by
* ADM
* @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM
* @sgl_cnt - number of SGL in bam_sgl. Only used by BAM
- * @dma_desc - low level DMA engine descriptor
+ * @dir - DMA transfer direction
*/
struct desc_info {
+ struct dma_async_tx_descriptor *dma_desc;
struct list_head node;
- enum dma_data_direction dir;
union {
struct scatterlist adm_sgl;
struct {
int sgl_cnt;
};
};
- struct dma_async_tx_descriptor *dma_desc;
+ enum dma_data_direction dir;
};
/*
/*
* NAND controller data struct
*
- * @controller: base controller structure
- * @host_list: list containing all the chips attached to the
- * controller
* @dev: parent device
+ *
* @base: MMIO base
- * @base_phys: physical base address of controller registers
- * @base_dma: dma base address of controller registers
+ *
* @core_clk: controller clock
* @aon_clk: another controller clock
*
+ * @regs: a contiguous chunk of memory for DMA register
+ * writes. contains the register values to be
+ * written to controller
+ *
+ * @props: properties of current NAND controller,
+ * initialized via DT match data
+ *
+ * @controller: base controller structure
+ * @host_list: list containing all the chips attached to the
+ * controller
+ *
* @chan: dma channel
* @cmd_crci: ADM DMA CRCI for command flow control
* @data_crci: ADM DMA CRCI for data flow control
+ *
* @desc_list: DMA descriptor list (list of desc_infos)
*
* @data_buffer: our local DMA buffer for page read/writes,
* used when we can't use the buffer provided
* by upper layers directly
- * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf
- * functions
* @reg_read_buf: local buffer for reading back registers via DMA
+ *
+ * @base_phys: physical base address of controller registers
+ * @base_dma: dma base address of controller registers
* @reg_read_dma: contains dma address for register read buffer
- * @reg_read_pos: marker for data read in reg_read_buf
*
- * @regs: a contiguous chunk of memory for DMA register
- * writes. contains the register values to be
- * written to controller
- * @cmd1/vld: some fixed controller register values
- * @props: properties of current NAND controller,
- * initialized via DT match data
+ * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf
+ * functions
* @max_cwperpage: maximum QPIC codewords required. calculated
* from all connected NAND devices pagesize
+ *
+ * @reg_read_pos: marker for data read in reg_read_buf
+ *
+ * @cmd1/vld: some fixed controller register values
*/
struct qcom_nand_controller {
- struct nand_controller controller;
- struct list_head host_list;
-
struct device *dev;
void __iomem *base;
- phys_addr_t base_phys;
- dma_addr_t base_dma;
struct clk *core_clk;
struct clk *aon_clk;
+ struct nandc_regs *regs;
+ struct bam_transaction *bam_txn;
+
+ const struct qcom_nandc_props *props;
+
+ struct nand_controller controller;
+ struct list_head host_list;
+
union {
/* will be used only by QPIC for BAM DMA */
struct {
};
struct list_head desc_list;
- struct bam_transaction *bam_txn;
u8 *data_buffer;
+ __le32 *reg_read_buf;
+
+ phys_addr_t base_phys;
+ dma_addr_t base_dma;
+ dma_addr_t reg_read_dma;
+
int buf_size;
int buf_count;
int buf_start;
unsigned int max_cwperpage;
- __le32 *reg_read_buf;
- dma_addr_t reg_read_dma;
int reg_read_pos;
- struct nandc_regs *regs;
-
u32 cmd1, vld;
- const struct qcom_nandc_props *props;
};
/*
* and reserved bytes
* @cw_data: the number of bytes within a codeword protected
* by ECC
- * @use_ecc: request the controller to use ECC for the
- * upcoming read/write
- * @bch_enabled: flag to tell whether BCH ECC mode is used
* @ecc_bytes_hw: ECC bytes used by controller hardware for this
* chip
- * @status: value to be returned if NAND_CMD_STATUS command
- * is executed
+ *
* @last_command: keeps track of last command on this chip. used
* for reading correct status
*
* @cfg0, cfg1, cfg0_raw..: NANDc register configurations needed for
* ecc/non-ecc mode for the current nand flash
* device
+ *
+ * @status: value to be returned if NAND_CMD_STATUS command
+ * is executed
+ * @use_ecc: request the controller to use ECC for the
+ * upcoming read/write
+ * @bch_enabled: flag to tell whether BCH ECC mode is used
*/
struct qcom_nand_host {
struct nand_chip chip;
int cs;
int cw_size;
int cw_data;
- bool use_ecc;
- bool bch_enabled;
int ecc_bytes_hw;
int spare_bytes;
int bbm_size;
- u8 status;
+
int last_command;
u32 cfg0, cfg1;
u32 ecc_bch_cfg;
u32 clrflashstatus;
u32 clrreadstatus;
+
+ u8 status;
+ bool use_ecc;
+ bool bch_enabled;
};
/*
* This data type corresponds to the NAND controller properties which varies
* among different NAND controllers.
* @ecc_modes - ecc mode for NAND
+ * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
* @is_bam - whether NAND controller is using BAM
* @is_qpic - whether NAND CTRL is part of qpic IP
* @qpic_v2 - flag to indicate QPIC IP version 2
- * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
*/
struct qcom_nandc_props {
u32 ecc_modes;
+ u32 dev_cmd_reg_start;
bool is_bam;
bool is_qpic;
bool qpic_v2;
- u32 dev_cmd_reg_start;
};
/* Frees the BAM transaction memory */