Remove the following warnings seen when building with W=1.
Warning (unique_unit_address): /soc/timer@
40000c00: duplicate unit-address
(also used in node /soc/timers@
40000c00)
This approach is based on some discussions[1], to restructure the dtsi
and dts files.
Timer5 is enabled by default on stm32f7 series, to act as clockevent. In
order to get rid of the W=1 warning, and be compliant with dt-schemas
(e.g. dtbs_check):
- In stm32f746.dtsi:
. Keep the more complete timers5 description
. Remove the most simple timer5 node that is duplicate
- In each board:
. adopt "st,stm32-timer" compatible for timers5, also add the interrupt
. use /delete-property/ and /delete-node/ so the it matches the
clockevent bindings
Note: all this is done in one shot (e.g. not split) to keep clockevent
functionality.
[1] https://lore.kernel.org/linux-arm-kernel/Yaf4jiZIp8+ndaXs@robh.at.kernel.org/
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
bus-width = <4>;
};
+&timers5 {
+ /* Override timer5 to act as clockevent */
+ compatible = "st,stm32-timer";
+ interrupts = <50>;
+ status = "okay";
+ /delete-property/#address-cells;
+ /delete-property/#size-cells;
+ /delete-property/clock-names;
+ /delete-node/pwm;
+ /delete-node/timer@4;
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
bus-width = <4>;
};
+&timers5 {
+ /* Override timer5 to act as clockevent */
+ compatible = "st,stm32-timer";
+ interrupts = <50>;
+ status = "okay";
+ /delete-property/#address-cells;
+ /delete-property/#size-cells;
+ /delete-property/clock-names;
+ /delete-node/pwm;
+ /delete-node/timer@4;
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins_b>;
pinctrl-names = "default";
};
};
- timer5: timer@40000c00 {
- compatible = "st,stm32-timer";
- reg = <0x40000c00 0x400>;
- interrupts = <50>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
- };
-
timers5: timers@40000c00 {
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
};
+&timers5 {
+ /* Override timer5 to act as clockevent */
+ compatible = "st,stm32-timer";
+ interrupts = <50>;
+ status = "okay";
+ /delete-property/#address-cells;
+ /delete-property/#size-cells;
+ /delete-property/clock-names;
+ /delete-node/pwm;
+ /delete-node/timer@4;
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";