OSDN Git Service

iio: st_accel: support the LIS331DL sensor
authorLinus Walleij <linus.walleij@linaro.org>
Tue, 19 May 2015 13:37:18 +0000 (15:37 +0200)
committerJonathan Cameron <jic23@kernel.org>
Mon, 8 Jun 2015 21:21:18 +0000 (22:21 +0100)
This adds support for the LIS331DL sensor version. This is
a simple 8bit-only accelerometer.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Documentation/devicetree/bindings/iio/st-sensors.txt
drivers/iio/accel/st_accel.h
drivers/iio/accel/st_accel_core.c
drivers/iio/accel/st_accel_i2c.c

index fb5e0c2..8a6be3b 100644 (file)
@@ -30,6 +30,7 @@ Accelerometers:
 - st,lsm330d-accel
 - st,lsm330dl-accel
 - st,lsm330dlc-accel
+- st,lis331dl-accel
 - st,lis331dlh-accel
 - st,lsm303dl-accel
 - st,lsm303dlm-accel
index 7ee9724..aa10019 100644 (file)
@@ -20,6 +20,7 @@
 #define LSM330D_ACCEL_DEV_NAME         "lsm330d_accel"
 #define LSM330DL_ACCEL_DEV_NAME                "lsm330dl_accel"
 #define LSM330DLC_ACCEL_DEV_NAME       "lsm330dlc_accel"
+#define LIS331DL_ACCEL_DEV_NAME                "lis331dl_accel"
 #define LIS331DLH_ACCEL_DEV_NAME       "lis331dlh"
 #define LSM303DL_ACCEL_DEV_NAME                "lsm303dl_accel"
 #define LSM303DLH_ACCEL_DEV_NAME       "lsm303dlh_accel"
index ad19fb4..970e9f9 100644 (file)
 #define ST_ACCEL_4_IG1_EN_MASK                 0x08
 #define ST_ACCEL_4_MULTIREAD_BIT               true
 
+/* CUSTOM VALUES FOR SENSOR 5 */
+#define ST_ACCEL_5_WAI_EXP                     0x3b
+#define ST_ACCEL_5_ODR_ADDR                    0x20
+#define ST_ACCEL_5_ODR_MASK                    0x80
+#define ST_ACCEL_5_ODR_AVL_100HZ_VAL           0x00
+#define ST_ACCEL_5_ODR_AVL_400HZ_VAL           0x01
+#define ST_ACCEL_5_PW_ADDR                     0x20
+#define ST_ACCEL_5_PW_MASK                     0x40
+#define ST_ACCEL_5_FS_ADDR                     0x20
+#define ST_ACCEL_5_FS_MASK                     0x20
+#define ST_ACCEL_5_FS_AVL_2_VAL                        0X00
+#define ST_ACCEL_5_FS_AVL_8_VAL                        0X01
+/* TODO: check these resulting gain settings, these are not in the datsheet */
+#define ST_ACCEL_5_FS_AVL_2_GAIN               IIO_G_TO_M_S_2(18000)
+#define ST_ACCEL_5_FS_AVL_8_GAIN               IIO_G_TO_M_S_2(72000)
+#define ST_ACCEL_5_DRDY_IRQ_ADDR               0x22
+#define ST_ACCEL_5_DRDY_IRQ_INT1_MASK          0x04
+#define ST_ACCEL_5_DRDY_IRQ_INT2_MASK          0x20
+#define ST_ACCEL_5_IG1_EN_ADDR                 0x21
+#define ST_ACCEL_5_IG1_EN_MASK                 0x08
+#define ST_ACCEL_5_MULTIREAD_BIT               false
+
 static const struct iio_chan_spec st_accel_8bit_channels[] = {
        ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
                        BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
@@ -470,6 +492,54 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
                .multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT,
                .bootime = 2, /* guess */
        },
+       {
+               .wai = ST_ACCEL_5_WAI_EXP,
+               .sensors_supported = {
+                       [0] = LIS331DL_ACCEL_DEV_NAME,
+               },
+               .ch = (struct iio_chan_spec *)st_accel_8bit_channels,
+               .odr = {
+                       .addr = ST_ACCEL_5_ODR_ADDR,
+                       .mask = ST_ACCEL_5_ODR_MASK,
+                       .odr_avl = {
+                               { 100, ST_ACCEL_5_ODR_AVL_100HZ_VAL },
+                               { 400, ST_ACCEL_5_ODR_AVL_400HZ_VAL, },
+                       },
+               },
+               .pw = {
+                       .addr = ST_ACCEL_5_PW_ADDR,
+                       .mask = ST_ACCEL_5_PW_MASK,
+                       .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+                       .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+               },
+               .enable_axis = {
+                       .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+                       .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+               },
+               .fs = {
+                       .addr = ST_ACCEL_5_FS_ADDR,
+                       .mask = ST_ACCEL_5_FS_MASK,
+                       .fs_avl = {
+                               [0] = {
+                                       .num = ST_ACCEL_FS_AVL_2G,
+                                       .value = ST_ACCEL_5_FS_AVL_2_VAL,
+                                       .gain = ST_ACCEL_5_FS_AVL_2_GAIN,
+                               },
+                               [1] = {
+                                       .num = ST_ACCEL_FS_AVL_8G,
+                                       .value = ST_ACCEL_5_FS_AVL_8_VAL,
+                                       .gain = ST_ACCEL_5_FS_AVL_8_GAIN,
+                               },
+                       },
+               },
+               .drdy_irq = {
+                       .addr = ST_ACCEL_5_DRDY_IRQ_ADDR,
+                       .mask_int1 = ST_ACCEL_5_DRDY_IRQ_INT1_MASK,
+                       .mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK,
+               },
+               .multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT,
+               .bootime = 2, /* guess */
+       },
 };
 
 static int st_accel_read_raw(struct iio_dev *indio_dev,
index 6b720c1..d4ad72c 100644 (file)
@@ -49,6 +49,10 @@ static const struct of_device_id st_accel_of_match[] = {
                .data = LSM330DLC_ACCEL_DEV_NAME,
        },
        {
+               .compatible = "st,lis331dl-accel",
+               .data = LIS331DL_ACCEL_DEV_NAME,
+       },
+       {
                .compatible = "st,lis331dlh-accel",
                .data = LIS331DLH_ACCEL_DEV_NAME,
        },