spi/xilinx: Support for spi mode LSB_FIRST

Hardware supports LSB_FIRST mode. Support it also in the driver.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 79bd84f..d4edeee 100644 (file)
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -34,7 +34,8 @@
 #define XSPI_CR_MASTER_MODE    0x04
 #define XSPI_CR_CPOL           0x08
 #define XSPI_CR_CPHA           0x10
-#define XSPI_CR_MODE_MASK      (XSPI_CR_CPHA | XSPI_CR_CPOL)
+#define XSPI_CR_MODE_MASK      (XSPI_CR_CPHA | XSPI_CR_CPOL | \
+                                XSPI_CR_LSB_FIRST)
 #define XSPI_CR_TXFIFO_RESET   0x20
 #define XSPI_CR_RXFIFO_RESET   0x40
 #define XSPI_CR_MANUAL_SSELECT 0x80
@@ -194,6 +195,8 @@ static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
                        cr |= XSPI_CR_CPHA;
                if (spi->mode & SPI_CPOL)
                        cr |= XSPI_CR_CPOL;
+               if (spi->mode & SPI_LSB_FIRST)
+                       cr |= XSPI_CR_LSB_FIRST;
                xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
 
                /* We do not check spi->max_speed_hz here as the SPI clock
@@ -353,7 +356,7 @@ static int xilinx_spi_probe(struct platform_device *pdev)
                return -ENODEV;
 
        /* the spi->mode bits understood by this driver: */
-       master->mode_bits = SPI_CPOL | SPI_CPHA;
+       master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
 
        xspi = spi_master_get_devdata(master);
        xspi->bitbang.master = master;