--- /dev/null
+/*
+ * IMX31 Clock Control Module
+ *
+ * Copyright (C) 2012 NICTA
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ * To get the timer frequencies right, we need to emulate at least part of
+ * the CCM.
+ */
+
+#include "hw.h"
+#include "sysbus.h"
+#include "sysemu.h"
+#include "imx.h"
+
+#define CKIH_FREQ 26000000 /* 26MHz crystal input */
+#define CKIL_FREQ 32768 /* nominal 32khz clock */
+
+
+//#define DEBUG_CCM 1
+#ifdef DEBUG_CCM
+#define DPRINTF(fmt, args...) \
+do { printf("imx_ccm: " fmt , ##args); } while (0)
+#else
+#define DPRINTF(fmt, args...) do {} while (0)
+#endif
+
+static int imx_ccm_post_load(void *opaque, int version_id);
+
+typedef struct {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+
+ uint32_t ccmr;
+ uint32_t pdr0;
+ uint32_t pdr1;
+ uint32_t mpctl;
+ uint32_t spctl;
+ uint32_t cgr[3];
+ uint32_t pmcr0;
+ uint32_t pmcr1;
+
+ /* Frequencies precalculated on register changes */
+ uint32_t pll_refclk_freq;
+ uint32_t mcu_clk_freq;
+ uint32_t hsp_clk_freq;
+ uint32_t ipg_clk_freq;
+} IMXCCMState;
+
+static const VMStateDescription vmstate_imx_ccm = {
+ .name = "imx-ccm",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(ccmr, IMXCCMState),
+ VMSTATE_UINT32(pdr0, IMXCCMState),
+ VMSTATE_UINT32(pdr1, IMXCCMState),
+ VMSTATE_UINT32(mpctl, IMXCCMState),
+ VMSTATE_UINT32(spctl, IMXCCMState),
+ VMSTATE_UINT32_ARRAY(cgr, IMXCCMState, 3),
+ VMSTATE_UINT32(pmcr0, IMXCCMState),
+ VMSTATE_UINT32(pmcr1, IMXCCMState),
+ VMSTATE_UINT32(pll_refclk_freq, IMXCCMState),
+ },
+ .post_load = imx_ccm_post_load,
+};
+
+/* CCMR */
+#define CCMR_FPME (1<<0)
+#define CCMR_MPE (1<<3)
+#define CCMR_MDS (1<<7)
+#define CCMR_FPMF (1<<26)
+#define CCMR_PRCS (3<<1)
+
+/* PDR0 */
+#define PDR0_MCU_PODF_SHIFT (0)
+#define PDR0_MCU_PODF_MASK (0x7)
+#define PDR0_MAX_PODF_SHIFT (3)
+#define PDR0_MAX_PODF_MASK (0x7)
+#define PDR0_IPG_PODF_SHIFT (6)
+#define PDR0_IPG_PODF_MASK (0x3)
+#define PDR0_NFC_PODF_SHIFT (8)
+#define PDR0_NFC_PODF_MASK (0x7)
+#define PDR0_HSP_PODF_SHIFT (11)
+#define PDR0_HSP_PODF_MASK (0x7)
+#define PDR0_PER_PODF_SHIFT (16)
+#define PDR0_PER_PODF_MASK (0x1f)
+#define PDR0_CSI_PODF_SHIFT (23)
+#define PDR0_CSI_PODF_MASK (0x1ff)
+
+#define EXTRACT(value, name) (((value) >> PDR0_##name##_PODF_SHIFT) \
+ & PDR0_##name##_PODF_MASK)
+#define INSERT(value, name) (((value) & PDR0_##name##_PODF_MASK) << \
+ PDR0_##name##_PODF_SHIFT)
+/* PLL control registers */
+#define PD(v) (((v) >> 26) & 0xf)
+#define MFD(v) (((v) >> 16) & 0x3ff)
+#define MFI(v) (((v) >> 10) & 0xf);
+#define MFN(v) ((v) & 0x3ff)
+
+#define PLL_PD(x) (((x) & 0xf) << 26)
+#define PLL_MFD(x) (((x) & 0x3ff) << 16)
+#define PLL_MFI(x) (((x) & 0xf) << 10)
+#define PLL_MFN(x) (((x) & 0x3ff) << 0)
+
+uint32_t imx_clock_frequency(DeviceState *dev, IMXClk clock)
+{
+ IMXCCMState *s = container_of(dev, IMXCCMState, busdev.qdev);
+
+ switch (clock) {
+ case NOCLK:
+ return 0;
+ case MCU:
+ return s->mcu_clk_freq;
+ case HSP:
+ return s->hsp_clk_freq;
+ case IPG:
+ return s->ipg_clk_freq;
+ case CLK_32k:
+ return CKIL_FREQ;
+ }
+ return 0;
+}
+
+/*
+ * Calculate PLL output frequency
+ */
+static uint32_t calc_pll(uint32_t pllreg, uint32_t base_freq)
+{
+ int32_t mfn = MFN(pllreg); /* Numerator */
+ uint32_t mfi = MFI(pllreg); /* Integer part */
+ uint32_t mfd = 1 + MFD(pllreg); /* Denominator */
+ uint32_t pd = 1 + PD(pllreg); /* Pre-divider */
+
+ if (mfi < 5) {
+ mfi = 5;
+ }
+ /* mfn is 10-bit signed twos-complement */
+ mfn <<= 32 - 10;
+ mfn >>= 32 - 10;
+
+ return ((2 * (base_freq >> 10) * (mfi * mfd + mfn)) /
+ (mfd * pd)) << 10;
+}
+
+static void update_clocks(IMXCCMState *s)
+{
+ /*
+ * If we ever emulate more clocks, this should switch to a data-driven
+ * approach
+ */
+
+ if ((s->ccmr & CCMR_PRCS) == 1) {
+ s->pll_refclk_freq = CKIL_FREQ * 1024;
+ } else {
+ s->pll_refclk_freq = CKIH_FREQ;
+ }
+
+ /* ipg_clk_arm aka MCU clock */
+ if ((s->ccmr & CCMR_MDS) || !(s->ccmr & CCMR_MPE)) {
+ s->mcu_clk_freq = s->pll_refclk_freq;
+ } else {
+ s->mcu_clk_freq = calc_pll(s->mpctl, s->pll_refclk_freq);
+ }
+
+ /* High-speed clock */
+ s->hsp_clk_freq = s->mcu_clk_freq / (1 + EXTRACT(s->pdr0, HSP));
+ s->ipg_clk_freq = s->hsp_clk_freq / (1 + EXTRACT(s->pdr0, IPG));
+
+ DPRINTF("Clocks: mcu %uMHz, HSP %uMHz, IPG %uHz\n",
+ s->mcu_clk_freq / 1000000,
+ s->hsp_clk_freq / 1000000,
+ s->ipg_clk_freq);
+}
+
+static void imx_ccm_reset(DeviceState *dev)
+{
+ IMXCCMState *s = container_of(dev, IMXCCMState, busdev.qdev);
+
+ s->ccmr = 0x074b0b7b;
+ s->pdr0 = 0xff870b48;
+ s->pdr1 = 0x49fcfe7f;
+ s->mpctl = PLL_PD(1) | PLL_MFD(0) | PLL_MFI(6) | PLL_MFN(0);
+ s->cgr[0] = s->cgr[1] = s->cgr[2] = 0xffffffff;
+ s->spctl = PLL_PD(1) | PLL_MFD(4) | PLL_MFI(0xc) | PLL_MFN(1);
+ s->pmcr0 = 0x80209828;
+
+ update_clocks(s);
+}
+
+static uint64_t imx_ccm_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ IMXCCMState *s = (IMXCCMState *)opaque;
+
+ DPRINTF("read(offset=%x)", offset >> 2);
+ switch (offset >> 2) {
+ case 0: /* CCMR */
+ DPRINTF(" ccmr = 0x%x\n", s->ccmr);
+ return s->ccmr;
+ case 1:
+ DPRINTF(" pdr0 = 0x%x\n", s->pdr0);
+ return s->pdr0;
+ case 2:
+ DPRINTF(" pdr1 = 0x%x\n", s->pdr1);
+ return s->pdr1;
+ case 4:
+ DPRINTF(" mpctl = 0x%x\n", s->mpctl);
+ return s->mpctl;
+ case 6:
+ DPRINTF(" spctl = 0x%x\n", s->spctl);
+ return s->spctl;
+ case 8:
+ DPRINTF(" cgr0 = 0x%x\n", s->cgr[0]);
+ return s->cgr[0];
+ case 9:
+ DPRINTF(" cgr1 = 0x%x\n", s->cgr[1]);
+ return s->cgr[1];
+ case 10:
+ DPRINTF(" cgr2 = 0x%x\n", s->cgr[2]);
+ return s->cgr[2];
+ case 18: /* LTR1 */
+ return 0x00004040;
+ case 23:
+ DPRINTF(" pcmr0 = 0x%x\n", s->pmcr0);
+ return s->pmcr0;
+ }
+ DPRINTF(" return 0\n");
+ return 0;
+}
+
+static void imx_ccm_write(void *opaque, target_phys_addr_t offset,
+ uint64_t value, unsigned size)
+{
+ IMXCCMState *s = (IMXCCMState *)opaque;
+
+ DPRINTF("write(offset=%x, value = %x)\n",
+ offset >> 2, (unsigned int)value);
+ switch (offset >> 2) {
+ case 0:
+ s->ccmr = CCMR_FPMF | (value & 0x3b6fdfff);
+ break;
+ case 1:
+ s->pdr0 = value & 0xff9f3fff;
+ break;
+ case 2:
+ s->pdr1 = value;
+ break;
+ case 4:
+ s->mpctl = value & 0xbfff3fff;
+ break;
+ case 6:
+ s->spctl = value & 0xbfff3fff;
+ break;
+ case 8:
+ s->cgr[0] = value;
+ return;
+ case 9:
+ s->cgr[1] = value;
+ return;
+ case 10:
+ s->cgr[2] = value;
+ return;
+
+ default:
+ return;
+ }
+ update_clocks(s);
+}
+
+static const struct MemoryRegionOps imx_ccm_ops = {
+ .read = imx_ccm_read,
+ .write = imx_ccm_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int imx_ccm_init(SysBusDevice *dev)
+{
+ IMXCCMState *s = FROM_SYSBUS(typeof(*s), dev);
+
+ memory_region_init_io(&s->iomem, &imx_ccm_ops, s, "imx_ccm", 0x1000);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ return 0;
+}
+
+static int imx_ccm_post_load(void *opaque, int version_id)
+{
+ IMXCCMState *s = (IMXCCMState *)opaque;
+
+ update_clocks(s);
+ return 0;
+}
+
+static void imx_ccm_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *sbc = SYS_BUS_DEVICE_CLASS(klass);
+
+ sbc->init = imx_ccm_init;
+ dc->reset = imx_ccm_reset;
+ dc->vmsd = &vmstate_imx_ccm;
+ dc->desc = "i.MX Clock Control Module";
+}
+
+static TypeInfo imx_ccm_info = {
+ .name = "imx_ccm",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(IMXCCMState),
+ .class_init = imx_ccm_class_init,
+};
+
+static void imx_ccm_register_types(void)
+{
+ type_register_static(&imx_ccm_info);
+}
+
+type_init(imx_ccm_register_types)