return __cmpxchg_small(ptr, old, new, size);
case 4:
- return __cmpxchg_asm("ll", "sc", (volatile u32 *)ptr, old, new);
+ return __cmpxchg_asm("ll", "sc", (volatile u32 *)ptr,
+ (u32)old, new);
case 8:
/* lld/scd are only available for MIPS64 */
if (!IS_ENABLED(CONFIG_64BIT))
return __cmpxchg_called_with_bad_pointer();
- return __cmpxchg_asm("lld", "scd", (volatile u64 *)ptr, old, new);
+ return __cmpxchg_asm("lld", "scd", (volatile u64 *)ptr,
+ (u64)old, new);
default:
return __cmpxchg_called_with_bad_pointer();
}
static struct plat_stmmacenet_data ls1x_eth0_pdata = {
- .bus_id = 0,
- .phy_addr = -1,
+ .bus_id = 0,
+ .phy_addr = -1,
#if defined(CONFIG_LOONGSON1_LS1B)
- .interface = PHY_INTERFACE_MODE_MII,
+ .interface = PHY_INTERFACE_MODE_MII,
#elif defined(CONFIG_LOONGSON1_LS1C)
- .interface = PHY_INTERFACE_MODE_RMII,
+ .interface = PHY_INTERFACE_MODE_RMII,
#endif
- .mdio_bus_data = &ls1x_mdio_bus_data,
- .dma_cfg = &ls1x_eth_dma_cfg,
- .has_gmac = 1,
- .tx_coe = 1,
- .init = ls1x_eth_mux_init,
+ .mdio_bus_data = &ls1x_mdio_bus_data,
+ .dma_cfg = &ls1x_eth_dma_cfg,
+ .has_gmac = 1,
+ .tx_coe = 1,
+ .rx_queues_to_use = 1,
+ .tx_queues_to_use = 1,
+ .init = ls1x_eth_mux_init,
};
static struct resource ls1x_eth0_resources[] = {
#ifdef CONFIG_LOONGSON1_LS1B
static struct plat_stmmacenet_data ls1x_eth1_pdata = {
- .bus_id = 1,
- .phy_addr = -1,
- .interface = PHY_INTERFACE_MODE_MII,
- .mdio_bus_data = &ls1x_mdio_bus_data,
- .dma_cfg = &ls1x_eth_dma_cfg,
- .has_gmac = 1,
- .tx_coe = 1,
- .init = ls1x_eth_mux_init,
+ .bus_id = 1,
+ .phy_addr = -1,
+ .interface = PHY_INTERFACE_MODE_MII,
+ .mdio_bus_data = &ls1x_mdio_bus_data,
+ .dma_cfg = &ls1x_eth_dma_cfg,
+ .has_gmac = 1,
+ .tx_coe = 1,
+ .rx_queues_to_use = 1,
+ .tx_queues_to_use = 1,
+ .init = ls1x_eth_mux_init,
};
static struct resource ls1x_eth1_resources[] = {
break;
default:
/* Reserved R6 ops */
- pr_err("Reserved MIPS R6 CMP.condn.S operation\n");
return SIGILL;
}
}
break;
default:
/* Reserved R6 ops */
- pr_err("Reserved MIPS R6 CMP.condn.D operation\n");
return SIGILL;
}
}
{
int src, dst, r, td, ts, mem_off, b_off;
bool need_swap, did_move, cmp_eq;
- unsigned int target;
+ unsigned int target = 0;
u64 t64;
s64 t64s;
int bpf_op = BPF_OP(insn->code);
boards_origin="$5"
shift 5
-cd "${srctree}"
-
# Only print Skipping... lines if the user explicitly specified BOARDS=. In the
# general case it only serves to obscure the useful output about what actually
# was included.
esac
for board in $@; do
- board_cfg="arch/mips/configs/generic/board-${board}.config"
+ board_cfg="${srctree}/arch/mips/configs/generic/board-${board}.config"
if [ ! -f "${board_cfg}" ]; then
echo "WARNING: Board config '${board_cfg}' not found"
continue
done || continue
# Merge this board config fragment into our final config file
- ./scripts/kconfig/merge_config.sh \
+ ${srctree}/scripts/kconfig/merge_config.sh \
-m -O ${objtree} ${cfg} ${board_cfg} \
| grep -Ev '^(#|Using)'
done