mtd: spi-nor: drop \t after #define

Spacing is a little non-standard here. Fix up tabs vs. spaces.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Huang Shijie <b32955@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>

diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 9428d28..a6e8719 100644 (file)
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -11,55 +11,55 @@
 #define __LINUX_MTD_SPI_NOR_H
 
 /* Flash opcodes. */
-#define        OPCODE_WREN             0x06    /* Write enable */
-#define        OPCODE_RDSR             0x05    /* Read status register */
-#define        OPCODE_WRSR             0x01    /* Write status register 1 byte */
-#define        OPCODE_NORM_READ        0x03    /* Read data bytes (low frequency) */
-#define        OPCODE_FAST_READ        0x0b    /* Read data bytes (high frequency) */
-#define        OPCODE_DUAL_READ        0x3b    /* Read data bytes (Dual SPI) */
-#define        OPCODE_QUAD_READ        0x6b    /* Read data bytes (Quad SPI) */
-#define        OPCODE_PP               0x02    /* Page program (up to 256 bytes) */
-#define        OPCODE_BE_4K            0x20    /* Erase 4KiB block */
-#define        OPCODE_BE_4K_PMC        0xd7    /* Erase 4KiB block on PMC chips */
-#define        OPCODE_BE_32K           0x52    /* Erase 32KiB block */
-#define        OPCODE_CHIP_ERASE       0xc7    /* Erase whole flash chip */
-#define        OPCODE_SE               0xd8    /* Sector erase (usually 64KiB) */
-#define        OPCODE_RDID             0x9f    /* Read JEDEC ID */
-#define        OPCODE_RDCR             0x35    /* Read configuration register */
+#define OPCODE_WREN            0x06    /* Write enable */
+#define OPCODE_RDSR            0x05    /* Read status register */
+#define OPCODE_WRSR            0x01    /* Write status register 1 byte */
+#define OPCODE_NORM_READ       0x03    /* Read data bytes (low frequency) */
+#define OPCODE_FAST_READ       0x0b    /* Read data bytes (high frequency) */
+#define OPCODE_DUAL_READ       0x3b    /* Read data bytes (Dual SPI) */
+#define OPCODE_QUAD_READ       0x6b    /* Read data bytes (Quad SPI) */
+#define OPCODE_PP              0x02    /* Page program (up to 256 bytes) */
+#define OPCODE_BE_4K           0x20    /* Erase 4KiB block */
+#define OPCODE_BE_4K_PMC       0xd7    /* Erase 4KiB block on PMC chips */
+#define OPCODE_BE_32K          0x52    /* Erase 32KiB block */
+#define OPCODE_CHIP_ERASE      0xc7    /* Erase whole flash chip */
+#define OPCODE_SE              0xd8    /* Sector erase (usually 64KiB) */
+#define OPCODE_RDID            0x9f    /* Read JEDEC ID */
+#define OPCODE_RDCR            0x35    /* Read configuration register */
 
 /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
-#define        OPCODE_NORM_READ_4B     0x13    /* Read data bytes (low frequency) */
-#define        OPCODE_FAST_READ_4B     0x0c    /* Read data bytes (high frequency) */
-#define        OPCODE_DUAL_READ_4B     0x3c    /* Read data bytes (Dual SPI) */
-#define        OPCODE_QUAD_READ_4B     0x6c    /* Read data bytes (Quad SPI) */
-#define        OPCODE_PP_4B            0x12    /* Page program (up to 256 bytes) */
-#define        OPCODE_SE_4B            0xdc    /* Sector erase (usually 64KiB) */
+#define OPCODE_NORM_READ_4B    0x13    /* Read data bytes (low frequency) */
+#define OPCODE_FAST_READ_4B    0x0c    /* Read data bytes (high frequency) */
+#define OPCODE_DUAL_READ_4B    0x3c    /* Read data bytes (Dual SPI) */
+#define OPCODE_QUAD_READ_4B    0x6c    /* Read data bytes (Quad SPI) */
+#define OPCODE_PP_4B           0x12    /* Page program (up to 256 bytes) */
+#define OPCODE_SE_4B           0xdc    /* Sector erase (usually 64KiB) */
 
 /* Used for SST flashes only. */
-#define        OPCODE_BP               0x02    /* Byte program */
-#define        OPCODE_WRDI             0x04    /* Write disable */
-#define        OPCODE_AAI_WP           0xad    /* Auto address increment word program */
+#define OPCODE_BP              0x02    /* Byte program */
+#define OPCODE_WRDI            0x04    /* Write disable */
+#define OPCODE_AAI_WP          0xad    /* Auto address increment word program */
 
 /* Used for Macronix and Winbond flashes. */
-#define        OPCODE_EN4B             0xb7    /* Enter 4-byte mode */
-#define        OPCODE_EX4B             0xe9    /* Exit 4-byte mode */
+#define OPCODE_EN4B            0xb7    /* Enter 4-byte mode */
+#define OPCODE_EX4B            0xe9    /* Exit 4-byte mode */
 
 /* Used for Spansion flashes only. */
-#define        OPCODE_BRWR             0x17    /* Bank register write */
+#define OPCODE_BRWR            0x17    /* Bank register write */
 
 /* Status Register bits. */
-#define        SR_WIP                  1       /* Write in progress */
-#define        SR_WEL                  2       /* Write enable latch */
+#define SR_WIP                 1       /* Write in progress */
+#define SR_WEL                 2       /* Write enable latch */
 /* meaning of other SR_* bits may differ between vendors */
-#define        SR_BP0                  4       /* Block protect 0 */
-#define        SR_BP1                  8       /* Block protect 1 */
-#define        SR_BP2                  0x10    /* Block protect 2 */
-#define        SR_SRWD                 0x80    /* SR write protect */
+#define SR_BP0                 4       /* Block protect 0 */
+#define SR_BP1                 8       /* Block protect 1 */
+#define SR_BP2                 0x10    /* Block protect 2 */
+#define SR_SRWD                        0x80    /* SR write protect */
 
-#define SR_QUAD_EN_MX           0x40    /* Macronix Quad I/O */
+#define SR_QUAD_EN_MX          0x40    /* Macronix Quad I/O */
 
 /* Configuration Register bits. */
-#define CR_QUAD_EN_SPAN                0x2     /* Spansion Quad I/O */
+#define CR_QUAD_EN_SPAN                0x2     /* Spansion Quad I/O */
 
 enum read_mode {
        SPI_NOR_NORMAL = 0,
@@ -95,7 +95,7 @@ struct spi_nor_xfer_cfg {
        u8              dummy_cycles;
 };
 
-#define        SPI_NOR_MAX_CMD_SIZE    8
+#define SPI_NOR_MAX_CMD_SIZE   8
 enum spi_nor_ops {
        SPI_NOR_OPS_READ = 0,
        SPI_NOR_OPS_WRITE,