config system. Hopefully I got everything here correct...
-Erik
-# Library Configuration rules for uClibc
#
-# This file contains rules which are shared between multiple Makefiles. All
-# normal configuration options live in the file named "Config". You probably
-# should not mess with this file unless you know what you are doing...
-#
-# Copyright (C) 2000 by Lineo, inc.
-# Copyright (C) 2000,2001 Erik Andersen <andersee@debian.org>
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Library General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or (at your option) any
-# later version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Library General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-# other sundry sources. Files within this library are copyright by their
-# respective copyright holders.
-
-NATIVE_CC = gcc
-
-# If you are running a cross compiler, you may want to set this
-# to something more interesting... Target architecture is determined
-# by asking this compiler what arch it compiles stuff for.
-CROSS = #$(TARGET_ARCH)-linux-
-CC = $(CROSS)gcc
-AR = $(CROSS)ar
-LD = $(CROSS)ld
-NM = $(CROSS)nm
-STRIPTOOL = $(CROSS)strip
-#STRIPTOOL = /bin/true
-
-# Set the following to `true' to make a debuggable build, and `false' for
-# production builds.
-DODEBUG = false
-
-# Compiler warnings you want to see
-WARNINGS=-Wall
-# Note that the kernel source you use to compile with should be the same as the
-# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary
-# compatibility across kernel versions. So don't expect, for example, uClibc
-# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
-# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
-# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
-# work at all. You have been warned.
-KERNEL_SOURCE=/home/andersee/kernel-source-2.4.18
+mainmenu "uClibc C Library Configuration"
-# Set this to `false' if your CPU doesn't have a memory management unit (MMU).
-# Set it to `true' otherwise.
-HAS_MMU = true
+menu "Target Architecture Features and Options"
-# Set this to `false' if you don't have/need basic floating point support
-# support in libc (strtod, printf, scanf). Set it to `true' otherwise.
-# If this is not true, then libm will not be built.
-HAS_FLOATING_POINT = true
+config HAVE_ELF
+ bool
+ default y
-# Set to `true' if you want the math library to contain the full set
-# of C99 math library features. Costs an extra 35k or so on x86.
-DO_C99_MATH = true
-
-# Set this to 'false if you don't need shadow password support.
-HAS_SHADOW = true
-
-# Set this to `false' if you don't have/need locale support; `true' otherwise.
-# NOTE: Currently does not affect collation.
-# You must also generate the locale data and associated .h file.
-# See the README in directory extra/locale for details.
-HAS_LOCALE = false
-
-# Set this to `false' if you don't have/need wide char support.
-HAS_WCHAR = false
-
-# This specifies which malloc implementation is used.
-#
-# "malloc" use mmap for all allocations and so works very well on MMU-less
-# systems that do not support the brk() system call. It is pretty smart
-# about reusing already allocated memory, and minimizing memory wastage.
-#
-# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call
-# for all memory allocations. This makes it very fast. It is also pretty
-# smart about reusing already allocated memory, and minimizing memory wastage.
-# Because this uses brk() it will not work on uClinux MMU-less systems.
-#MALLOC = malloc
-MALLOC = malloc-930716
+config C_SYMBOL_PREFIX
+ string
+ default ""
-# If you want large file support (greater then 2 GiB) turn this on.
-# Do not enable this unless your kernel provides large file support.
-DOLFS = true
+config ARCH_CFLAGS
+ string
+ default ""
-# Posix regular expression code is really big -- 27k all by itself.
-# If you don't use regular expressions, turn this off and save space.
-# Of course, if you only staticly link, leave this on, since it will
-# only be included in your apps if you use regular expressions.
-INCLUDE_REGEX=true
+config ARCH_LDFLAGS
+ string
+ default ""
-# If you want to include RPC support, enable this. RPC is almost never used
-# for anything except NFS support, so unless you plan to use NFS, leave this
-# disabled. This is off by default.
-INCLUDE_RPC = false
-
-# Normally we enable just enough RPC support for things like rshd and
-# nfs mount to work. If you find you need the rest of the RPC stuff,
-# then enable this.
-INCLUDE_FULL_RPC = false
-
-# If you want to include support for the next version of the Internet
-# Protocol: IP version 6, enable this. This is off by default.
-INCLUDE_IPV6 = false
-
-# If you want to include threads support, enable this. The C library will
-# be compiled thread-safe, and the libpthread library will be built.
-INCLUDE_THREADS=false
-
-# If you want to support only Unix 98 PTYs enable this. Some older
-# applications may need this disabled. For most current programs,
-# you can generally leave this true.
-UNIX98PTY_ONLY = true
-
-# Enable this if /dev/pts is on a devpts or devfs file system. Both
-# these filesystems automatically manage permissions on the /dev/pts
-# devices. You may need to mount this fs on /dev/pts for this to work.
-# This is true by default.
-ASSUME_DEVPTS = true
-
-
-# If you want to compile the library as PIC code, turn this on.
-# This is automagically enabled when HAVE_SHARED is true
-DOPIC = false
-
-# Enable support for shared libraries? If this is false, you can
-# ignore all the rest of the options in this file...
-HAVE_SHARED = false
-
-# uClibc has a native shared library loader for some architectures.
-BUILD_UCLIBC_LDSO=false
-
-# If you are using shared libraries, but do not want/have a native
-# uClibc shared library loader, please specify the name of your
-# system's shared library loader here...
-#SYSTEM_LDSO=/lib/ld-linux.so.2
-SYSTEM_LDSO=$(shell for each in `$(CC) -print-search-dirs| \
- grep ^libraries| sed -e 's/^libraries: //' -e 's/:/ /g'`;\
- do ls $$each/ld.so.* 2>/dev/null;done)
-
-# When using shared libraries, this path is the location where the
-# shared library will be invoked. This value will be compiled into
-# every binary compiled with uClibc.
-#
-# BIG FAT WARNING:
-# If you do not have a shared library loader with the correct name
-# sitting in the directory this points to, your binaries will not run.
-SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib
+config LIBGCC_CFLAGS
+ string
+ default ""
-# DEVEL_PREFIX is the directory into which the uClibc development
-# environment will be installed. The result will look something
-# like the following:
-# DEVEL_PREFIX/
-# lib/ <contains all runtime and static libs>
-# include/ <Where all the header files go>
-# This value is used by the 'make install' Makefile target. Since this
-# directory is compiled into the uclibc cross compiler spoofer, you
-# have to recompile if you change this value...
-DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc
+source "extra/Configs/Config.in.arch"
-# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing
-# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by
-# the 'make install' target, and is not compiled into anything. This
-# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will
-# want to set this to "/usr" instead.
-SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)
+endmenu
-# DEVEL_TOOL_PREFIX is the directory prefix used when installing
-# bin/gcc, bin/ld, etc. This is only used by the 'make install'
-# target, and is not compiled into anything. This defaults to
-# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to
-# set this to something else.
-DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr
+source "extra/Configs/Config.in"
-# If you want 'make install' to install everything under a temporary
-# directory, the define PREFIX during the install step,
-# i.e., 'make PREFIX=/var/tmp/uClibc install'.
-#PREFIX = $(TOPDIR)/_install
menu "Target Architecture Features and Options"
+config HAVE_ELF
+ bool
+ default y
+
+config C_SYMBOL_PREFIX
+ string
+ default ""
+
+config ARCH_CFLAGS
+ string
+ default ""
+
+config ARCH_LDFLAGS
+ string
+ default ""
+
+config LIBGCC_CFLAGS
+ string
+ default ""
+
choice
prompt "Target Processor Type"
default CONFIG_GENERIC_ARM
endchoice
+config ARCH_HAS_NO_MMU
+ bool
+ default y if CONFIG_ARM7TDMI
+
config CPU_CFLAGS
string
default "" if CONFIG_GENERIC_ARM
-# Library Configuration rules for uClibc for CRIS (Axis Etrax CPU)
#
-# This file contains rules which are shared between multiple Makefiles. Feel
-# free to adjust to taste...
-# -Erik Andersen <andersen@lineo.com> <andersee@debian.org>
-#
-# Copyright (C) 2000 by Lineo, inc.
-# (C) 2002 by Axis Communications AB
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Library General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or (at your option) any
-# later version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Library General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-# other sundry sources. Files within this library are copyright by their
-# respective copyright holders.
-
-# Target architecture
-TARGET_ARCH = cris
-
-# Target specific things to add to CFLAGS
-ARCH_CFLAGS = -fpic -mlinux -D__USE_WEAK_ALIASES
-
-# Target specific things to add to LDFLAGS
-ARCH_LDFLAGS = -mcrislinux
-
-# Target specific optins needed when asking $(CROSS)gcc about libgcc.a
-LIBGCC_CFLAGS = -mlinux
-
-# If you are running a cross compiler, you may want to set this
-# to something more interesting...
-NATIVE_CC = gcc
-CROSS = cris-
-CC = $(CROSS)gcc
-AR = $(CROSS)ar
-LD = $(CROSS)ld
-STRIPTOOL = $(CROSS)strip
-# STRIPTOOL = /bin/true
-
-# Compiler warnings you want to see
-WARNINGS=-Wall
-
-# Note that the kernel source you use to compile with should be the same as the
-# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary
-# compatibility across kernel versions. So don't expect, for example, uClibc
-# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
-# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
-# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
-# work at all. You have been warned.
-KERNEL_SOURCE=$(AXIS_KERNEL_DIR)
-
-# Disable this if your CPU has a memory management unit (MMU)
-HAS_MMU = true
-
-# Set this to 'false' if basic floating support isn't needed in
-# libc (strtod, printf, scanf). It this isn't true, libm will no
-# be built
-HAS_FLOATING_POINT = true
-
-# Set to 'true' if the math library should contain the full C99 math
-# functions. This adds a few K's..
-DO_C99_MATH = false
-
-# Set this to `false' if you don't have/need doubles. This primarily
-# effects libm, which gets quite a bit larger, but also effects several
-# other places. Set it to `true' otherwise.
-HAS_DOUBLE = false
-
-# Set this to `false' if you don't have/need long doubles. This primarily
-# effects libm, which gets quite a bit larger. Set it to `true' otherwise.
-HAS_LONG_DOUBLE = false
-# Set this to 'false if you don't need shadow password support.
-HAS_SHADOW = false
+mainmenu "uClibc C Library Configuration"
-# Set this to `false' if you don't have/need locale support; `true' otherwise.
-# Note: Currently only affects the ctype functions. You must also generate
-# a locale file for anything but the C locale. See directory extra/locale for
-# a utility to do so. Also see the following option.
-HAS_LOCALE = false
+menu "Target Architecture Features and Options"
-# Set this to the path of your uClibc locale file directory.
-# Warning! This must be different than the glibc locale directory to avoid
-# name conflicts, as the locale files are entirely different in format!
-LOCALE_DIR = "/usr/share/uClibc-locale/"
+config HAVE_ELF
+ bool
+ default y
-# Set the following to `true' to make a debuggable build.
-# Do not enable this for production builds...
-DODEBUG = false
+config C_SYMBOL_PREFIX
+ string
+ default ""
-# This specifies which malloc implementation is used.
-# "malloc-simple" is very, very small, but is also very, very dumb
-# and does not try to make good use of memory or clean up after itself.
-#
-# "malloc" on the other hand is a bit bigger, but is pretty smart thereby
-# minimizing memory wastage and reusing already allocated memory. This
-# can be lots faster and safer IMHO.
-#
-# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc.
-# It is actually smaller than "malloc", at least on i386. Right now, it
-# only works on i386 (and maybe m68k) because it needs sbrk.
-#MALLOC = malloc-simple
-#MALLOC = malloc
-MALLOC = malloc-930716
-
-# If you want to collect common syscall code into one function, set to
-# true. On i386 this saves about than 2.8k over all syscalls.
-# The idea came from the implementation in dietlibc.
-# At present, only affects i386.
-UNIFIED_SYSCALL = false
-
-# If you want large file summit support (greater then 2 Gib),
-# turn this on. This has no effect unless your kernel supports
-# lfs. This currently does nothing, but may someday...
-DOLFS = false
-
-# Posix regular expression code is really big -- 27k all by itself.
-# If you don't use regular expressions, turn this off and save space.
-# Of course, if you only staticly link, leave this on, since it will
-# only be included in your apps if you use regular expressions.
-INCLUDE_REGEX = true
-
-# If you want to include RPC support, enable this. RPC is almost never used
-# for anything except NFS support, so unless you plan to use NFS, leave this
-# disabled. This is off by default.
-INCLUDE_RPC = true
-
-# If you want to include threads support, enable this. The C library will
-# be compiled thread-safe, and the libpthread library will be built.
-INCLUDE_THREADS = true
-
-# If you want to include support for the next version of the Internet
-# Protocol: IP version 6, enable this. This is off by default.
-INCLUDE_IPV6 = false
+config ARCH_CFLAGS
+ string
+ default "-fpic -mlinux -D__USE_WEAK_ALIASES"
-# If you want to support only Unix 98 PTYs enable this. Some older
-# applications may need this disabled. For most current programs,
-# you can generally leave this true.
-UNIX98PTY_ONLY = true
+config ARCH_LDFLAGS
+ string
+ default "-mcrislinux"
-# Enable this if /dev/pts is on a devpts or devfs file system. Both
-# these filesystems automatically manage permissions on the /dev/pts
-# devices. You may need to mount this fs on /dev/pts for this to work.
-# This is true by default.
-ASSUME_DEVPTS = true
+config LIBGCC_CFLAGS
+ string
+ default "-mlinux"
-# If you want to compile the library as PIC code, turn this on.
-# This is automagically enabled when HAVE_SHARED is true
-DOPIC = false
+source "extra/Configs/Config.in.arch"
-# Enable support for shared libraries? If this is false, you can
-# ignore all the rest of the options in this file...
-HAVE_SHARED = true
+endmenu
-# uClibc has a native shared library loader for some architectures.
-BUILD_UCLIBC_LDSO=true
+source "extra/Configs/Config.in"
-# If you are using shared libraries, but do not want/have a native
-# uClibc shared library loader, please specify the name of your
-# system's shared library loader here...
-#
-#SYSTEM_LDSO=/lib/ld.so.1
-
-# When using shared libraries, this path is the location where the
-# shared library will be invoked. This value will be compiled into
-# every binary compiled with uClibc.
-#
-# BIG FAT WARNING:
-# If you do not have a shared library loader with the correct name
-# sitting in the directory this points to, your binaries will not run.
-SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib
-
-# DEVEL_PREFIX is the directory into which the uClibc development
-# environment will be installed. The result will look something
-# like the following:
-# DEVEL_PREFIX/
-# bin/ <contains gcc, ld, etc>
-# lib/ <contains all runtime and static libs>
-# include/ <Where all the header files go>
-# This value is used by the 'make install' Makefile target. Since this
-# directory is compiled into the uclibc cross compiler spoofer, you
-# have to recompile if you change this value...
-#DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc
-
-ifdef prefix
-DEVEL_PREFIX = $(prefix)
-else
-ifdef AXIS_TOP_DIR
-DEVEL_PREFIX = $(AXIS_TOP_DIR)/target/cris-axis-linux-gnuuclibc
-else
-DEVEL_PREFIX = $(EROOT)
-endif
-endif
-
-# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing
-# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by
-# the 'make install' target, and is not compiled into anything. This
-# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will
-# want to set this to "/usr" instead.
-#
-SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)/lib
-# If you want 'make install' to install everything under a temporary
-# directory, the define PREFIX during the install step,
-# i.e., 'make PREFIX=/var/tmp/uClibc install'.
-#PREFIX = $(TOPDIR)/_install
+++ /dev/null
-# Library Configuration rules for uClibc
-#
-# This file contains rules which are shared between multiple Makefiles. All
-# normal configuration options live in the file named "Config". You probably
-# should not mess with this file unless you know what you are doing...
-#
-# Copyright (C) 2000 by Lineo, inc.
-# Copyright (C) 2000,2001 Erik Andersen <andersee@debian.org>
-#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Library General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or (at your option) any
-# later version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Library General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-# other sundry sources. Files within this library are copyright by their
-# respective copyright holders.
-
-NATIVE_CC = gcc
-
-# If you are running a cross compiler, you may want to set this
-# to something more interesting... Target architecture is determined
-# by asking this compiler what arch it compiles stuff for.
-CROSS = arm-elf-
-CC = $(CROSS)gcc
-AR = $(CROSS)ar
-LD = $(CROSS)ld
-NM = $(CROSS)nm
-STRIPTOOL = $(CROSS)strip
-#STRIPTOOL = /bin/true
-
-# Set the following to `true' to make a debuggable build, and `false' for
-# production builds.
-DODEBUG = false
-
-# Compiler warnings you want to see
-WARNINGS=-Wall
-
-# Note that the kernel source you use to compile with should be the same as the
-# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary
-# compatibility across kernel versions. So don't expect, for example, uClibc
-# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
-# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
-# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
-# work at all. You have been warned.
-KERNEL_SOURCE=/home/andersen/CVS/uClinux-2.0.x
-
-# Set this to `false' if your CPU doesn't have a memory management unit (MMU).
-# Set it to `true' otherwise.
-HAS_MMU = false
-
-# Set this to `false' if you don't have/need basic floating point support
-# support in libc (strtod, printf, scanf). Set it to `true' otherwise.
-# If this is not true, then libm will not be built.
-HAS_FLOATING_POINT = true
-
-# Set to `true' if you want the math library to contain the full set
-# of C99 math library features. Costs an extra 35k or so on x86.
-DO_C99_MATH = false
-
-# Set this to 'false if you don't need shadow password support.
-HAS_SHADOW = false
-
-# Set this to `false' if you don't have/need locale support; `true' otherwise.
-# NOTE: Currently does not affect collation.
-# You must also generate the locale data and associated .h file.
-# See the README in directory extra/locale for details.
-HAS_LOCALE = false
-
-# Set this to `false' if you don't have/need wide char support.
-HAS_WCHAR = false
-
-# This specifies which malloc implementation is used.
-#
-# "malloc" use mmap for all allocations and so works very well on MMU-less
-# systems that do not support the brk() system call. It is pretty smart
-# about reusing already allocated memory, and minimizing memory wastage.
-#
-# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call
-# for all memory allocations. This makes it very fast. It is also pretty
-# smart about reusing already allocated memory, and minimizing memory wastage.
-# Because this uses brk() it will not work on uClinux MMU-less systems.
-MALLOC = malloc
-#MALLOC = malloc-930716
-
-# Having brk allows one to use malloc-930716, which is an order
-# of magnitude faster then "malloc" for most allocations, but
-# will do very bad things on MMU-less systems...
-EXCLUDE_BRK=true
-
-# If you want large file support (greater then 2 GiB) turn this on.
-# Do not enable this unless your kernel provides large file support.
-DOLFS = false
-
-# Posix regular expression code is really big -- 27k all by itself.
-# If you don't use regular expressions, turn this off and save space.
-# Of course, if you only staticly link, leave this on, since it will
-# only be included in your apps if you use regular expressions.
-INCLUDE_REGEX=true
-
-# If you want to include RPC support, enable this. RPC is almost never used
-# for anything except NFS support, so unless you plan to use NFS, leave this
-# disabled. This is off by default.
-INCLUDE_RPC = false
-
-# Normally we enable just enough RPC support for things like rshd and
-# nfs mount to work. If you find you need the rest of the RPC stuff,
-# then enable this.
-INCLUDE_FULL_RPC = false
-
-# If you want to include support for the next version of the Internet
-# Protocol: IP version 6, enable this. This is off by default.
-INCLUDE_IPV6 = false
-
-# If you want to support only Unix 98 PTYs enable this. Some older
-# applications may need this disabled. For most current programs,
-# you can generally leave this true.
-UNIX98PTY_ONLY = true
-
-# Enable this if /dev/pts is on a devpts or devfs file system. Both
-# these filesystems automatically manage permissions on the /dev/pts
-# devices. You may need to mount this fs on /dev/pts for this to work.
-# This is true by default.
-ASSUME_DEVPTS = true
-
-
-# If you want to compile the library as PIC code, turn this on.
-# This is automagically enabled when HAVE_SHARED is true
-DOPIC = false
-
-# Enable support for shared libraries? If this is false, you can
-# ignore all the rest of the options in this file...
-HAVE_SHARED = false
-
-# uClibc has a native shared library loader for some architectures.
-BUILD_UCLIBC_LDSO=false
-
-# If you are using shared libraries, but do not want/have a native
-# uClibc shared library loader, please specify the name of your
-# system's shared library loader here...
-#SYSTEM_LDSO=/lib/ld-linux.so.2
-
-# When using shared libraries, this path is the location where the
-# shared library will be invoked. This value will be compiled into
-# every binary compiled with uClibc.
-#
-# BIG FAT WARNING:
-# If you do not have a shared library loader with the correct name
-# sitting in the directory this points to, your binaries will not run.
-#SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib
-
-# DEVEL_PREFIX is the directory into which the uClibc development
-# environment will be installed. The result will look something
-# like the following:
-# DEVEL_PREFIX/
-# lib/ <contains all runtime and static libs>
-# include/ <Where all the header files go>
-# This value is used by the 'make install' Makefile target. Since this
-# directory is compiled into the uclibc cross compiler spoofer, you
-# have to recompile if you change this value...
-#DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc
-DEVEL_PREFIX = /opt/uClinux/$(TARGET_ARCH)-elf
-
-# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing
-# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by
-# the 'make install' target, and is not compiled into anything. This
-# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will
-# want to set this to "/usr" instead.
-SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)
-
-# DEVEL_TOOL_PREFIX is the directory prefix used when installing
-# bin/gcc, bin/ld, etc. This is only used by the 'make install'
-# target, and is not compiled into anything. This defaults to
-# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to
-# set this to something else.
-DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr
-
-# If you want 'make install' to install everything under a temporary
-# directory, the define PREFIX during the install step,
-# i.e., 'make PREFIX=/var/tmp/uClibc install'.
-#PREFIX = $(TOPDIR)/_install
-
-# Library Configuration rules for uClibc
#
-# This file contains rules which are shared between multiple Makefiles. All
-# normal configuration options live in the file named "Config". You probably
-# should not mess with this file unless you know what you are doing...
-#
-# Copyright (C) 2002 Erik Andersen <andersee@debian.org>
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Library General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or (at your option) any
-# later version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Library General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-# other sundry sources. Files within this library are copyright by their
-# respective copyright holders.
-
-# What arch do you want to compile for...
-#TARGET_ARCH=arm
-#TARGET_ARCH=i386
-#TARGET_ARCH=m68k
-#TARGET_ARCH=powerpc
-#TARGET_ARCH=sh
-#TARGET_ARCH=sparc
-TARGET_ARCH=h8300
-
-# If you are running a cross compiler, you may want to set this
-# to something more interesting...
-NATIVE_CC = gcc
-CROSS = h8300-hitachi-hms-
-CC = $(CROSS)gcc
-AR = $(CROSS)ar
-LD = $(CROSS)ld
-NM = $(CROSS)nm
-STRIPTOOL = $(CROSS)strip
-#STRIPTOOL = /bin/true
-
-# Set the following to `true' to make a debuggable build, and `false' for
-# production builds.
-DODEBUG = false
-
-# Compiler warnings you want to see
-WARNINGS=-Wall
-
-# Note that the kernel source you use to compile with should be the same as the
-# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary
-# compatibility across kernel versions. So don't expect, for example, uClibc
-# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
-# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
-# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
-# work at all. You have been warned.
-KERNEL_SOURCE=/opt/uClinux/linux
-# Set this to `false' if your CPU doesn't have a memory management unit (MMU).
-# Set it to `true' otherwise.
-HAS_MMU = false
-
-# Set this to `false' if you don't have/need basic floating point support
-# support in libc (strtod, printf, scanf). Set it to `true' otherwise.
-# If this is not true, then libm will not be built.
-HAS_FLOATING_POINT = true
-
-# Set to `true' if you want the math library to contain the full set
-# of C99 math library features. Costs an extra 35k or so on x86.
-DO_C99_MATH = false
-
-# Set this to `false' if you don't have/need locale support; `true' otherwise.
-# NOTE: Currently does not affect collation.
-# You must also generate the locale data and associated .h file.
-# See the README in directory extra/locale for details.
-HAS_LOCALE = false
-
-# Set this to `false' if you don't have/need wide char support.
-HAS_WCHAR = false
-
-# This specifies which malloc implementation is used.
-#
-# "malloc" use mmap for all allocations and so works very well on MMU-less
-# systems that do not support the brk() system call. It is pretty smart
-# about reusing already allocated memory, and minimizing memory wastage.
-#
-# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call
-# for all memory allocations. This makes it very fast. It is also pretty
-# smart about reusing already allocated memory, and minimizing memory wastage.
-# Because this uses brk() it will not work on uClinux MMU-less systems.
-MALLOC = malloc
-#MALLOC = malloc-930716
+mainmenu "uClibc C Library Configuration"
-# If you want large file summit support (greater then 2 Gib),
-# turn this on. This has no effect unless your kernel supports
-# lfs. This currently does nothing, but may someday...
-DOLFS = false
+menu "Target Architecture Features and Options"
-# If you want to include RPC support, enable this. RPC is almost never used
-# for anything except NFS support, so unless you plan to use NFS, leave this
-# disabled. This is off by default.
-INCLUDE_RPC = true
+config HAVE_ELF
+ bool
+ default n
-# Normally we enable just enough RPC support for things like rshd and
-# nfs mount to work. If you find you need the rest of the RPC stuff,
-# then enable this.
-INCLUDE_FULL_RPC = false
+config C_SYMBOL_PREFIX
+ string
+ default "_"
-# If you want to include support for the next version of the Internet
-# Protocol: IP version 6, enable this. This is off by default.
-INCLUDE_IPV6 = false
+config ARCH_CFLAGS
+ string
+ default "-mh -mint32 -fsigned-char"
-# If you want to compile the library as PIC code, turn this on.
-DOPIC = false
+config ARCH_LDFLAGS
+ string
+ default ""
-#
-# ARCH_CFLAGS if your have something special to add to the CFLAGS
-#
-ARCH_CFLAGS = -mh -mint32 -fsigned-char
-#
-# this is needed for 2.4 m68knommu builds
-#
-ARCH_CFLAGS2 = -I$(KERNEL_SOURCE)/include
-#
-# get this from elsewhere, maybe
-#
-OPTIMIZATION = $(DEBUG_CFLAGS) -mh -mint32 -fsigned-char
-
-# This is a COFF compiler (ick), so disable all the cool stuff
-HAVE_ELF = false
-
-
-
-# Enable support for shared libraries? If this is false, you can
-# ignore all the rest of the options in this file...
-HAVE_SHARED = false
-
-# uClibc has a native shared library loader for some architectures.
-BUILD_UCLIBC_LDSO=false
-
-# If you are using shared libraries, but do not want/have a native
-# uClibc shared library loader, please specify the name of your
-# system's shared library loader here...
-#SYSTEM_LDSO=/lib/ld-linux.so.2
-
-# When using shared libraries, this path is the location where the
-# shared library will be invoked. This value will be compiled into
-# every binary compiled with uClibc.
-#
-# BIG FAT WARNING:
-# If you do not have a shared library loader with the correct name
-# sitting in the directory this points to, your binaries will not run.
-#SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib
+config LIBGCC_CFLAGS
+ string
+ default ""
-# C defiend symbols prefix charactor
-C_SYMBOL_PREFIX = _
+config ARCH_HAS_NO_MMU
+ bool
+ default y
-# DEVEL_PREFIX is the directory into which the uClibc development
-# environment will be installed. The result will look something
-# like the following:
-# DEVEL_PREFIX/
-# lib/ <contains all runtime and static libs>
-# include/ <Where all the header files go>
-# This value is used by the 'make install' Makefile target. Since this
-# directory is compiled into the uclibc cross compiler spoofer, you
-# have to recompile if you change this value...
-#DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc
-DEVEL_PREFIX = /opt/uClinux/$(TARGET_ARCH)-coff
+source "extra/Configs/Config.in.arch"
-# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing
-# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by
-# the 'make install' target, and is not compiled into anything. This
-# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will
-# want to set this to "/usr" instead.
-SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)
+endmenu
-# DEVEL_TOOL_PREFIX is the directory prefix used when installing
-# bin/gcc, bin/ld, etc. This is only used by the 'make install'
-# target, and is not compiled into anything. This defaults to
-# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to
-# set this to something else.
-DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr
+source "extra/Configs/Config.in"
-# If you want 'make install' to install everything under a temporary
-# directory, the define PREFIX during the install step,
-# i.e., 'make PREFIX=/var/tmp/uClibc install'.
-#PREFIX = $(TOPDIR)/_install
menu "Target Architecture Features and Options"
+config HAVE_ELF
+ bool
+ default y
+
+config C_SYMBOL_PREFIX
+ string
+ default ""
+
+config ARCH_CFLAGS
+ string
+ default ""
+
+config ARCH_LDFLAGS
+ string
+ default ""
+
+config LIBGCC_CFLAGS
+ string
+ default ""
+
choice
prompt "Target Processor Type"
default CONFIG_386
C_SYMBOL_PREFIX=""
UCLIBC_UCLINUX_BROKEN_MUNMAP=y
HAVE_ELF=y
-# NO_UNDERSCORES is not set
# HAVE_DOT_HIDDEN is not set
#
-# Library Configuration rules for uClibc
#
-# This file contains rules which are shared between multiple Makefiles. All
-# normal configuration options live in the file named "Config". You probably
-# should not mess with this file unless you know what you are doing...
-#
-# Copyright (C) 2000 by Lineo, inc.
-# Copyright (C) 2000,2001 Erik Andersen <andersee@debian.org>
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Library General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or (at your option) any
-# later version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Library General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-# other sundry sources. Files within this library are copyright by their
-# respective copyright holders.
-
-NATIVE_CC = gcc
-
-# If you are running a cross compiler, you may want to set this
-# to something more interesting... Target architecture is determined
-# by asking this compiler what arch it compiles stuff for.
-CROSS = i960-intel-coff-
-CC = $(CROSS)gcc
-AR = $(CROSS)ar
-LD = $(CROSS)ld
-NM = $(CROSS)nm
-STRIPTOOL = $(CROSS)strip
-#STRIPTOOL = /bin/true
-
-# Set the following to `true' to make a debuggable build, and `false' for
-# production builds.
-DODEBUG = false
-
-# Compiler warnings you want to see
-WARNINGS=-Wall
-
-# Note that the kernel source you use to compile with should be the same as the
-# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary
-# compatibility across kernel versions. So don't expect, for example, uClibc
-# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
-# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
-# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
-# work at all. You have been warned.
-KERNEL_SOURCE=/home/mproulx/uClinux/linux-2.0.x
-
-# Set this to `false' if your CPU doesn't have a memory management unit (MMU).
-# Set it to `true' otherwise.
-HAS_MMU = false
-
-# Set this to `false' if you don't have/need basic floating point support
-# support in libc (strtod, printf, scanf). Set it to `true' otherwise.
-# If this is not true, then libm will not be built.
-HAS_FLOATING_POINT = false
-
-# Set to `true' if you want the math library to contain the full set
-# of C99 math library features. Costs an extra 35k or so on x86.
-DO_C99_MATH = false
-
-# Set this to 'false if you don't need shadow password support.
-HAS_SHADOW = false
-
-# Set this to `false' if you don't have/need locale support; `true' otherwise.
-# NOTE: Currently does not affect collation.
-# You must also generate the locale data and associated .h file.
-# See the README in directory extra/locale for details.
-HAS_LOCALE = false
-
-# Set this to `false' if you don't have/need wide char support.
-HAS_WCHAR = false
-
-# This specifies which malloc implementation is used.
-#
-# "malloc" use mmap for all allocations and so works very well on MMU-less
-# systems that do not support the brk() system call. It is pretty smart
-# about reusing already allocated memory, and minimizing memory wastage.
-#
-# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call
-# for all memory allocations. This makes it very fast. It is also pretty
-# smart about reusing already allocated memory, and minimizing memory wastage.
-# Because this uses brk() it will not work on uClinux MMU-less systems.
-MALLOC = malloc
-#MALLOC = malloc-930716
-
-# Having brk allows one to use malloc-930716, which is an order
-# of magnitude faster then "malloc" for most allocations, but
-# will do very bad things on MMU-less systems...
-EXCLUDE_BRK=true
-# If you want large file support (greater then 2 GiB) turn this on.
-# Do not enable this unless your kernel provides large file support.
-DOLFS = false
+mainmenu "uClibc C Library Configuration"
-# Posix regular expression code is really big -- 27k all by itself.
-# If you don't use regular expressions, turn this off and save space.
-# Of course, if you only staticly link, leave this on, since it will
-# only be included in your apps if you use regular expressions.
-INCLUDE_REGEX=true
+menu "Target Architecture Features and Options"
-# If you want to include RPC support, enable this. RPC is almost never used
-# for anything except NFS support, so unless you plan to use NFS, leave this
-# disabled. This is off by default.
-INCLUDE_RPC = true
+config HAVE_ELF
+ bool
+ default n
-# Normally we enable just enough RPC support for things like rshd and
-# nfs mount to work. If you find you need the rest of the RPC stuff,
-# then enable this.
-INCLUDE_FULL_RPC = false
+config C_SYMBOL_PREFIX
+ string
+ default "_"
-# If you want to include support for the next version of the Internet
-# Protocol: IP version 6, enable this. This is off by default.
-INCLUDE_IPV6 = false
+config ARCH_CFLAGS
+ string
+ default "-mh -mint32 -fsigned-char"
-# If you want to include threads support, enable this. The C library will
-# be compiled thread-safe, and the libpthread library will be built.
-INCLUDE_THREADS = false
-
-# If you want to support only Unix 98 PTYs enable this. Some older
-# applications may need this disabled. For most current programs,
-# you can generally leave this true.
-UNIX98PTY_ONLY = false
-
-# Enable this if /dev/pts is on a devpts or devfs file system. Both
-# these filesystems automatically manage permissions on the /dev/pts
-# devices. You may need to mount this fs on /dev/pts for this to work.
-# This is true by default.
-ASSUME_DEVPTS = true
-
-
-# If you want to compile the library as PIC code, turn this on.
-# This is automagically enabled when HAVE_SHARED is true
-DOPIC = false
-
-#
-# ARCH_CFLAGS if your have something special to add to the CFLAGS
-#
-ARCH_CFLAGS = -mrp
-#
-#
-# get this from elsewhere, maybe
-#
-OPTIMIZATION = -O2 $(DEBUG_CFLAGS)
-
-# This is a COFF compiler (ick), so disable all the cool stuff
-HAVE_ELF = false
-
-
-
-# Enable support for shared libraries? If this is false, you can
-# ignore all the rest of the options in this file...
-HAVE_SHARED = false
-
-# uClibc has a native shared library loader for some architectures.
-BUILD_UCLIBC_LDSO=false
-
-# If you are using shared libraries, but do not want/have a native
-# uClibc shared library loader, please specify the name of your
-# system's shared library loader here...
-#SYSTEM_LDSO=/lib/ld-linux.so.2
-
-# When using shared libraries, this path is the location where the
-# shared library will be invoked. This value will be compiled into
-# every binary compiled with uClibc.
-#
-# BIG FAT WARNING:
-# If you do not have a shared library loader with the correct name
-# sitting in the directory this points to, your binaries will not run.
-#SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib
+config ARCH_LDFLAGS
+ string
+ default ""
-# C defiend symbols prefix charactor
-C_SYMBOL_PREFIX = _
+config LIBGCC_CFLAGS
+ string
+ default ""
+
+config ARCH_HAS_NO_MMU
+ bool
+ default y
-# DEVEL_PREFIX is the directory into which the uClibc development
-# environment will be installed. The result will look something
-# like the following:
-# DEVEL_PREFIX/
-# lib/ <contains all runtime and static libs>
-# include/ <Where all the header files go>
-# This value is used by the 'make install' Makefile target. Since this
-# directory is compiled into the uclibc cross compiler spoofer, you
-# have to recompile if you change this value...
-DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc
+source "extra/Configs/Config.in.arch"
-# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing
-# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by
-# the 'make install' target, and is not compiled into anything. This
-# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will
-# want to set this to "/usr" instead.
-SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)
+endmenu
-# DEVEL_TOOL_PREFIX is the directory prefix used when installing
-# bin/gcc, bin/ld, etc. This is only used by the 'make install'
-# target, and is not compiled into anything. This defaults to
-# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to
-# set this to something else.
-DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr
+source "extra/Configs/Config.in"
-# If you want 'make install' to install everything under a temporary
-# directory, the define PREFIX during the install step,
-# i.e., 'make PREFIX=/var/tmp/uClibc install'.
-#PREFIX = $(TOPDIR)/_install
config UCLIBC_HAS_MMU
bool "Target CPU has a memory management unit (MMU)"
- default y
+ default y if !ARCH_HAS_NO_MMU
help
If your target CPU does not have a memory management unit (MMU),
then answer N here. Normally, Linux runs on systems with an MMU.
but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
work at all. You have been warned.
-config C_SYMBOL_PREFIX
- string
- default ""
-
config UCLIBC_UCLINUX_BROKEN_MUNMAP
bool
depends on !UCLIBC_HAS_MMU
default y
-config HAVE_ELF
+config EXCLUDE_BRK
bool
+ depends on !UCLIBC_HAS_MMU
default y
-config NO_UNDERSCORES
- bool
- default n
-
-config HAVE_DOT_HIDDEN
- bool
- default n
-
-# Library Configuration rules for uClibc
#
-# This file contains rules which are shared between multiple Makefiles. All
-# normal configuration options live in the file named "Config". You probably
-# should not mess with this file unless you know what you are doing...
-#
-# Copyright (C) 2000 by Lineo, inc.
-# Copyright (C) 2000,2001 Erik Andersen <andersee@debian.org>
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Library General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or (at your option) any
-# later version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Library General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-# other sundry sources. Files within this library are copyright by their
-# respective copyright holders.
-
-NATIVE_CC = gcc
-
-# If you are running a cross compiler, you may want to set this
-# to something more interesting... Target architecture is determined
-# by asking this compiler what arch it compiles stuff for.
-#CROSS = m68k-elf-
-CC = $(CROSS)gcc
-AR = $(CROSS)ar
-LD = $(CROSS)ld
-NM = $(CROSS)nm
-STRIPTOOL = $(CROSS)strip
-#STRIPTOOL = /bin/true
-
-# Set the following to `true' to make a debuggable build, and `false' for
-# production builds.
-DODEBUG = false
-
-# Compiler warnings you want to see
-WARNINGS=-Wall
-
-# Note that the kernel source you use to compile with should be the same as the
-# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary
-# compatibility across kernel versions. So don't expect, for example, uClibc
-# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
-# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
-# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
-# work at all. You have been warned.
-KERNEL_SOURCE=/usr/src/linux
-# Set this to `false' if your CPU doesn't have a memory management unit (MMU).
-# Set it to `true' otherwise.
-HAS_MMU = false
-
-# Set this to `false' if you don't have/need basic floating point support
-# support in libc (strtod, printf, scanf). Set it to `true' otherwise.
-# If this is not true, then libm will not be built.
-HAS_FLOATING_POINT = true
-
-# Set to `true' if you want the math library to contain the full set
-# of C99 math library features. Costs an extra 35k or so on x86.
-DO_C99_MATH = false
-
-# Set this to 'false if you don't need shadow password support.
-HAS_SHADOW = false
-
-# Set this to `false' if you don't have/need locale support; `true' otherwise.
-# NOTE: Currently does not affect collation.
-# You must also generate the locale data and associated .h file.
-# See the README in directory extra/locale for details.
-HAS_LOCALE = false
-
-# Set this to `false' if you don't have/need wide char support.
-HAS_WCHAR = false
-
-# This specifies which malloc implementation is used.
-#
-# "malloc" use mmap for all allocations and so works very well on MMU-less
-# systems that do not support the brk() system call. It is pretty smart
-# about reusing already allocated memory, and minimizing memory wastage.
-#
-# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call
-# for all memory allocations. This makes it very fast. It is also pretty
-# smart about reusing already allocated memory, and minimizing memory wastage.
-# Because this uses brk() it will not work on uClinux MMU-less systems.
-MALLOC = malloc
-#MALLOC = malloc-930716
+mainmenu "uClibc C Library Configuration"
-# Having brk allows one to use malloc-930716, which is an order
-# of magnitude faster then "malloc" for most allocations, but
-# will do very bad things on MMU-less systems...
-EXCLUDE_BRK=true
+menu "Target Architecture Features and Options"
-# If you want large file support (greater then 2 GiB) turn this on.
-# Do not enable this unless your kernel provides large file support.
-DOLFS = false
+config HAVE_ELF
+ bool
+ default y
-# Posix regular expression code is really big -- 27k all by itself.
-# If you don't use regular expressions, turn this off and save space.
-# Of course, if you only staticly link, leave this on, since it will
-# only be included in your apps if you use regular expressions.
-INCLUDE_REGEX=true
+config C_SYMBOL_PREFIX
+ string
+ default ""
-# If you want to include RPC support, enable this. RPC is almost never used
-# for anything except NFS support, so unless you plan to use NFS, leave this
-# disabled. This is off by default.
-INCLUDE_RPC = true
+config ARCH_CFLAGS
+ string
+ default "-Wa,--bitwise-or -I$(KERNEL_SOURCE)/include"
-# Normally we enable just enough RPC support for things like rshd and
-# nfs mount to work. If you find you need the rest of the RPC stuff,
-# then enable this.
-INCLUDE_FULL_RPC = false
+config ARCH_LDFLAGS
+ string
+ default ""
-# If you want to include support for the next version of the Internet
-# Protocol: IP version 6, enable this. This is off by default.
-INCLUDE_IPV6 = false
+config LIBGCC_CFLAGS
+ string
+ default ""
-# If you want to support only Unix 98 PTYs enable this. Some older
-# applications may need this disabled. For most current programs,
-# you can generally leave this true.
-UNIX98PTY_ONLY = true
+config HAVE_ELF
+ bool
+ default y
-# Enable this if /dev/pts is on a devpts or devfs file system. Both
-# these filesystems automatically manage permissions on the /dev/pts
-# devices. You may need to mount this fs on /dev/pts for this to work.
-# This is true by default.
-ASSUME_DEVPTS = true
-
-
-# If you want to compile the library as PIC code, turn this on.
-# This is automagically enabled when HAVE_SHARED is true
-DOPIC = false
-
-#
-# ARCH_CFLAGS if your have something special to add to the CFLAGS
-#
-ARCH_CFLAGS = -Wa,--bitwise-or -I$(KERNEL_SOURCE)/include
-#
-#
-# get this from elsewhere, maybe
-#
-OPTIMIZATION = $(DEBUG_CFLAGS)
-
-
-
-# Enable support for shared libraries? If this is false, you can
-# ignore all the rest of the options in this file...
-HAVE_SHARED = false
-
-# uClibc has a native shared library loader for some architectures.
-BUILD_UCLIBC_LDSO=false
-
-# If you are using shared libraries, but do not want/have a native
-# uClibc shared library loader, please specify the name of your
-# system's shared library loader here...
-#SYSTEM_LDSO=/lib/ld-linux.so.2
-
-# When using shared libraries, this path is the location where the
-# shared library will be invoked. This value will be compiled into
-# every binary compiled with uClibc.
-#
-# BIG FAT WARNING:
-# If you do not have a shared library loader with the correct name
-# sitting in the directory this points to, your binaries will not run.
-SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib
+config ARCH_HAS_NO_MMU
+ bool
+ default y
-# DEVEL_PREFIX is the directory into which the uClibc development
-# environment will be installed. The result will look something
-# like the following:
-# DEVEL_PREFIX/
-# lib/ <contains all runtime and static libs>
-# include/ <Where all the header files go>
-# This value is used by the 'make install' Makefile target. Since this
-# directory is compiled into the uclibc cross compiler spoofer, you
-# have to recompile if you change this value...
-DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc
+source "extra/Configs/Config.in.arch"
-# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing
-# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by
-# the 'make install' target, and is not compiled into anything. This
-# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will
-# want to set this to "/usr" instead.
-SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)
+endmenu
-# DEVEL_TOOL_PREFIX is the directory prefix used when installing
-# bin/gcc, bin/ld, etc. This is only used by the 'make install'
-# target, and is not compiled into anything. This defaults to
-# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to
-# set this to something else.
-DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr
+source "extra/Configs/Config.in"
-# If you want 'make install' to install everything under a temporary
-# directory, the define PREFIX during the install step,
-# i.e., 'make PREFIX=/var/tmp/uClibc install'.
-#PREFIX = $(TOPDIR)/_install
+++ /dev/null
-# Library Configuration rules for uClibc
-#
-# This file contains rules which are shared between multiple Makefiles. All
-# normal configuration options live in the file named "Config". You probably
-# should not mess with this file unless you know what you are doing...
-#
-# Copyright (C) 2000 by Lineo, inc.
-# Copyright (C) 2000,2001 Erik Andersen <andersee@debian.org>
-#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Library General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or (at your option) any
-# later version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Library General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-# other sundry sources. Files within this library are copyright by their
-# respective copyright holders.
-
-NATIVE_CC = gcc
-
-# If you are running a cross compiler, you may want to set this
-# to something more interesting... Target architecture is determined
-# by asking this compiler what arch it compiles stuff for.
-CROSS = m68k-coff-
-CC = $(CROSS)gcc
-AR = $(CROSS)ar
-LD = $(CROSS)ld
-NM = $(CROSS)nm
-STRIPTOOL = $(CROSS)strip
-#STRIPTOOL = /bin/true
-
-# Set the following to `true' to make a debuggable build, and `false' for
-# production builds.
-DODEBUG = false
-
-# Compiler warnings you want to see
-WARNINGS=-Wall
-
-# Note that the kernel source you use to compile with should be the same as the
-# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary
-# compatibility across kernel versions. So don't expect, for example, uClibc
-# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
-# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
-# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
-# work at all. You have been warned.
-KERNEL_SOURCE=/opt/uClinux/linux
-
-# Set this to `false' if your CPU doesn't have a memory management unit (MMU).
-# Set it to `true' otherwise.
-HAS_MMU = false
-
-# Set this to `false' if you don't have/need basic floating point support
-# support in libc (strtod, printf, scanf). Set it to `true' otherwise.
-# If this is not true, then libm will not be built.
-HAS_FLOATING_POINT = true
-
-# Set to `true' if you want the math library to contain the full set
-# of C99 math library features. Costs an extra 35k or so on x86.
-DO_C99_MATH = false
-
-# Set this to 'false if you don't need shadow password support.
-HAS_SHADOW = false
-
-# Set this to `false' if you don't have/need locale support; `true' otherwise.
-# NOTE: Currently does not affect collation.
-# You must also generate the locale data and associated .h file.
-# See the README in directory extra/locale for details.
-HAS_LOCALE = false
-
-# Set this to `false' if you don't have/need wide char support.
-HAS_WCHAR = false
-
-# This specifies which malloc implementation is used.
-#
-# "malloc" use mmap for all allocations and so works very well on MMU-less
-# systems that do not support the brk() system call. It is pretty smart
-# about reusing already allocated memory, and minimizing memory wastage.
-#
-# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call
-# for all memory allocations. This makes it very fast. It is also pretty
-# smart about reusing already allocated memory, and minimizing memory wastage.
-# Because this uses brk() it will not work on uClinux MMU-less systems.
-MALLOC = malloc
-#MALLOC = malloc-930716
-
-# Having brk allows one to use malloc-930716, which is an order
-# of magnitude faster then "malloc" for most allocations, but
-# will do very bad things on MMU-less systems...
-EXCLUDE_BRK=true
-
-# If you want large file support (greater then 2 GiB) turn this on.
-# Do not enable this unless your kernel provides large file support.
-DOLFS = false
-
-# Posix regular expression code is really big -- 27k all by itself.
-# If you don't use regular expressions, turn this off and save space.
-# Of course, if you only staticly link, leave this on, since it will
-# only be included in your apps if you use regular expressions.
-INCLUDE_REGEX=true
-
-# If you want to include RPC support, enable this. RPC is almost never used
-# for anything except NFS support, so unless you plan to use NFS, leave this
-# disabled. This is off by default.
-INCLUDE_RPC = true
-
-# Normally we enable just enough RPC support for things like rshd and
-# nfs mount to work. If you find you need the rest of the RPC stuff,
-# then enable this.
-INCLUDE_FULL_RPC = false
-
-# If you want to include support for the next version of the Internet
-# Protocol: IP version 6, enable this. This is off by default.
-INCLUDE_IPV6 = false
-
-# If you want to support only Unix 98 PTYs enable this. Some older
-# applications may need this disabled. For most current programs,
-# you can generally leave this true.
-UNIX98PTY_ONLY = true
-
-# Enable this if /dev/pts is on a devpts or devfs file system. Both
-# these filesystems automatically manage permissions on the /dev/pts
-# devices. You may need to mount this fs on /dev/pts for this to work.
-# This is true by default.
-ASSUME_DEVPTS = true
-
-
-# If you want to compile the library as PIC code, turn this on.
-# This is automagically enabled when HAVE_SHARED is true
-DOPIC = false
-
-#
-# ARCH_CFLAGS if your have something special to add to the CFLAGS
-#
-ARCH_CFLAGS = -Wa,--bitwise-or -msoft-float -I$(KERNEL_SOURCE)/include
-#
-#
-# get this from elsewhere, maybe
-#
-OPTIMIZATION = $(DEBUG_CFLAGS)
-
-# This is a COFF compiler (ick), so disable all the cool stuff
-HAVE_ELF = false
-
-
-
-# Enable support for shared libraries? If this is false, you can
-# ignore all the rest of the options in this file...
-HAVE_SHARED = false
-
-# uClibc has a native shared library loader for some architectures.
-BUILD_UCLIBC_LDSO=false
-
-# If you are using shared libraries, but do not want/have a native
-# uClibc shared library loader, please specify the name of your
-# system's shared library loader here...
-#SYSTEM_LDSO=/lib/ld-linux.so.2
-
-# When using shared libraries, this path is the location where the
-# shared library will be invoked. This value will be compiled into
-# every binary compiled with uClibc.
-#
-# BIG FAT WARNING:
-# If you do not have a shared library loader with the correct name
-# sitting in the directory this points to, your binaries will not run.
-#SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib
-
-# DEVEL_PREFIX is the directory into which the uClibc development
-# environment will be installed. The result will look something
-# like the following:
-# DEVEL_PREFIX/
-# lib/ <contains all runtime and static libs>
-# include/ <Where all the header files go>
-# This value is used by the 'make install' Makefile target. Since this
-# directory is compiled into the uclibc cross compiler spoofer, you
-# have to recompile if you change this value...
-#DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc
-DEVEL_PREFIX = /opt/uClinux/$(TARGET_ARCH)-coff
-
-# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing
-# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by
-# the 'make install' target, and is not compiled into anything. This
-# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will
-# want to set this to "/usr" instead.
-SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)
-
-# DEVEL_TOOL_PREFIX is the directory prefix used when installing
-# bin/gcc, bin/ld, etc. This is only used by the 'make install'
-# target, and is not compiled into anything. This defaults to
-# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to
-# set this to something else.
-DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr
-
-# If you want 'make install' to install everything under a temporary
-# directory, the define PREFIX during the install step,
-# i.e., 'make PREFIX=/var/tmp/uClibc install'.
-#PREFIX = $(TOPDIR)/_install
-
-# Library Configuration rules for uClibc
#
-# This file contains rules which are shared between multiple Makefiles. All
-# normal configuration options live in the file named "Config". You probably
-# should not mess with this file unless you know what you are doing...
-#
-# Copyright (C) 2000 by Lineo, inc.
-# Copyright (C) 2000,2001 Erik Andersen <andersee@debian.org>
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Library General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or (at your option) any
-# later version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Library General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-# other sundry sources. Files within this library are copyright by their
-# respective copyright holders.
-
-NATIVE_CC = gcc
-
-# Specify the target
-TARGET_ARCH=mips
-
-# If you are running a cross compiler, you may want to set this
-# to something more interesting... Target architecture is determined
-# by asking this compiler what arch it compiles stuff for.
-CROSS = mips-linux-
-CC = $(CROSS)gcc
-AR = $(CROSS)ar
-LD = $(CROSS)ld
-NM = $(CROSS)nm
-STRIPTOOL = $(CROSS)strip
-#STRIPTOOL = /bin/true
-
-# Set the following to `true' to make a debuggable build, and `false' for
-# production builds.
-DODEBUG = false
-
-# Compiler warnings you want to see
-WARNINGS = -Wall
-
-# Note that the kernel source you use to compile with should be the same as the
-# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary
-# compatibility across kernel versions. So don't expect, for example, uClibc
-# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
-# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
-# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
-# work at all. You have been warned.
-KERNEL_SOURCE = /usr/src/linux
-
-# Set this to `false' if your CPU doesn't have a memory management unit (MMU).
-# Set it to `true' otherwise.
-HAS_MMU = true
-
-# Set this to `false' if you don't have/need basic floating point support
-# support in libc (strtod, printf, scanf). Set it to `true' otherwise.
-# If this is not true, then libm will not be built.
-HAS_FLOATING_POINT = true
-
-# Set to `true' if you want the math library to contain the full set
-# of C99 math library features. Costs an extra 35k or so on x86.
-DO_C99_MATH = false
-
-# Set this to 'false if you don't need shadow password support.
-HAS_SHADOW = false
-
-# Set this to `false' if you don't have/need locale support; `true' otherwise.
-# NOTE: Currently does not affect collation.
-# You must also generate the locale data and associated .h file.
-# See the README in directory extra/locale for details.
-HAS_LOCALE = false
-
-# Set this to `false' if you don't have/need wide char support.
-HAS_WCHAR = false
-
-# This specifies which malloc implementation is used.
-#
-# "malloc" use mmap for all allocations and so works very well on MMU-less
-# systems that do not support the brk() system call. It is pretty smart
-# about reusing already allocated memory, and minimizing memory wastage.
-#
-# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call
-# for all memory allocations. This makes it very fast. It is also pretty
-# smart about reusing already allocated memory, and minimizing memory wastage.
-# Because this uses brk() it will not work on uClinux MMU-less systems.
-#MALLOC = malloc
-MALLOC = malloc-930716
-
-# If you want large file support (greater then 2 GiB) turn this on.
-# Do not enable this unless your kernel provides large file support.
-DOLFS = false
-
-# Posix regular expression code is really big -- 27k all by itself.
-# If you don't use regular expressions, turn this off and save space.
-# Of course, if you only staticly link, leave this on, since it will
-# only be included in your apps if you use regular expressions.
-INCLUDE_REGEX = true
-
-# If you want to include RPC support, enable this. RPC is almost never used
-# for anything except NFS support, so unless you plan to use NFS, leave this
-# disabled. This is off by default.
-INCLUDE_RPC = false
-
-# Normally we enable just enough RPC support for things like rshd and
-# nfs mount to work. If you find you need the rest of the RPC stuff,
-# then enable this.
-INCLUDE_FULL_RPC = false
-
-# If you want to include support for the next version of the Internet
-# Protocol: IP version 6, enable this. This is off by default.
-INCLUDE_IPV6 = false
-
-# If you want to include threads support, enable this. The C library will
-# be compiled thread-safe, and the libpthread library will be built.
-INCLUDE_THREADS = true
-
-# If you want to support only Unix 98 PTYs enable this. Some older
-# applications may need this disabled. For most current programs,
-# you can generally leave this true.
-UNIX98PTY_ONLY = true
-
-# Enable this if /dev/pts is on a devpts or devfs file system. Both
-# these filesystems automatically manage permissions on the /dev/pts
-# devices. You may need to mount this fs on /dev/pts for this to work.
-# This is true by default.
-ASSUME_DEVPTS = true
-
-# If you want to compile the library as PIC code, turn this on.
-# This is automagically enabled when HAVE_SHARED is true
-DOPIC = false
-
-# Enable support for shared libraries? If this is false, you can
-# ignore all the rest of the options in this file...
-HAVE_SHARED = true
-
-# uClibc has a native shared library loader for some architectures.
-BUILD_UCLIBC_LDSO = true
-
-# If you are using shared libraries, but do not want/have a native
-# uClibc shared library loader, please specify the name of your
-# system's shared library loader here...
-#SYSTEM_LDSO = /lib/ld-linux.so.2
-
-# When using shared libraries, this path is the location where the
-# shared library will be invoked. This value will be compiled into
-# every binary compiled with uClibc.
-#
-# BIG FAT WARNING:
-# If you do not have a shared library loader with the correct name
-# sitting in the directory this points to, your binaries will not run.
-SHARED_LIB_LOADER_PATH = /lib
-
-# DEVEL_PREFIX is the directory into which the uClibc development
-# environment will be installed. The result will look something
-# like the following:
-# DEVEL_PREFIX/
-# lib/ <contains all runtime and static libs>
-# include/ <Where all the header files go>
-# This value is used by the 'make install' Makefile target. Since this
-# directory is compiled into the uclibc cross compiler spoofer, you
-# have to recompile if you change this value...
-DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc
-
-# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing
-# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by
-# the 'make install' target, and is not compiled into anything. This
-# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will
-# want to set this to "/usr" instead.
-SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)
-
-# DEVEL_TOOL_PREFIX is the directory prefix used when installing
-# bin/gcc, bin/ld, etc. This is only used by the 'make install'
-# target, and is not compiled into anything. This defaults to
-# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to
-# set this to something else.
-DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr
-
-# If you want 'make install' to install everything under a temporary
-# directory, the define PREFIX during the install step,
-# i.e., 'make PREFIX=/var/tmp/uClibc install'.
-#PREFIX = $(TOPDIR)/_install
+
+mainmenu "uClibc C Library Configuration"
+
+menu "Target Architecture Features and Options"
+
+config HAVE_ELF
+ bool
+ default y
+
+config C_SYMBOL_PREFIX
+ string
+ default ""
+
+config ARCH_CFLAGS
+ string
+ default ""
+
+config ARCH_LDFLAGS
+ string
+ default ""
+
+config LIBGCC_CFLAGS
+ string
+ default ""
+
+choice
+ prompt "Target Processor Endianness"
+ default ARCH_LITTLE_ENDIAN
+ help
+ This is the endianness you wish to build use. Choose either Big
+ Endian (mips), or Little Endian (mipsel).
+
+config ARCH_LITTLE_ENDIAN
+ bool "Little Endian (mipsel)"
+
+config ARCH_BIG_ENDIAN
+ bool "Big Endian (mips)"
+
+endchoice
+
+
+source "extra/Configs/Config.in.arch"
+
+endmenu
+
+source "extra/Configs/Config.in"
+
+
-# Library Configuration rules for uClibc
#
-# This file contains rules which are shared between multiple Makefiles. All
-# normal configuration options live in the file named "Config". You probably
-# should not mess with this file unless you know what you are doing...
-#
-# Copyright (C) 2000 by Lineo, inc.
-# Copyright (C) 2000,2001 Erik Andersen <andersee@debian.org>
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Library General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or (at your option) any
-# later version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Library General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-# other sundry sources. Files within this library are copyright by their
-# respective copyright holders.
-
-NATIVE_CC = gcc
-
-# Specify the target
-TARGET_ARCH=mipsel
-
-# If you are running a cross compiler, you may want to set this
-# to something more interesting... Target architecture is determined
-# by asking this compiler what arch it compiles stuff for.
-CROSS = mipsel-linux-
-CC = $(CROSS)gcc
-AR = $(CROSS)ar
-LD = $(CROSS)ld
-NM = $(CROSS)nm
-STRIPTOOL = $(CROSS)strip
-#STRIPTOOL = /bin/true
-
-# Set the following to `true' to make a debuggable build, and `false' for
-# production builds.
-DODEBUG = false
-
-# Compiler warnings you want to see
-WARNINGS = -Wall
-
-# Note that the kernel source you use to compile with should be the same as the
-# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary
-# compatibility across kernel versions. So don't expect, for example, uClibc
-# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
-# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
-# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
-# work at all. You have been warned.
-KERNEL_SOURCE = /usr/src/linux
-
-# Set this to `false' if your CPU doesn't have a memory management unit (MMU).
-# Set it to `true' otherwise.
-HAS_MMU = true
-
-# Set this to `false' if you don't have/need basic floating point support
-# support in libc (strtod, printf, scanf). Set it to `true' otherwise.
-# If this is not true, then libm will not be built.
-HAS_FLOATING_POINT = true
-
-# Set to `true' if you want the math library to contain the full set
-# of C99 math library features. Costs an extra 35k or so on x86.
-DO_C99_MATH = false
-# Set this to 'false if you don't need shadow password support.
-HAS_SHADOW = false
+mainmenu "uClibc C Library Configuration"
-# Set this to `false' if you don't have/need locale support; `true' otherwise.
-# NOTE: Currently does not affect collation.
-# You must also generate the locale data and associated .h file.
-# See the README in directory extra/locale for details.
-HAS_LOCALE = false
+menu "Target Architecture Features and Options"
-# Set this to `false' if you don't have/need wide char support.
-HAS_WCHAR = false
+config HAVE_ELF
+ bool
+ default y
-# This specifies which malloc implementation is used.
-#
-# "malloc" use mmap for all allocations and so works very well on MMU-less
-# systems that do not support the brk() system call. It is pretty smart
-# about reusing already allocated memory, and minimizing memory wastage.
-#
-# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call
-# for all memory allocations. This makes it very fast. It is also pretty
-# smart about reusing already allocated memory, and minimizing memory wastage.
-# Because this uses brk() it will not work on uClinux MMU-less systems.
-#MALLOC = malloc
-MALLOC = malloc-930716
-
-# If you want large file support (greater then 2 GiB) turn this on.
-# Do not enable this unless your kernel provides large file support.
-DOLFS = false
-
-# Posix regular expression code is really big -- 27k all by itself.
-# If you don't use regular expressions, turn this off and save space.
-# Of course, if you only staticly link, leave this on, since it will
-# only be included in your apps if you use regular expressions.
-INCLUDE_REGEX = true
-
-# If you want to include RPC support, enable this. RPC is almost never used
-# for anything except NFS support, so unless you plan to use NFS, leave this
-# disabled. This is off by default.
-INCLUDE_RPC = false
-
-# Normally we enable just enough RPC support for things like rshd and
-# nfs mount to work. If you find you need the rest of the RPC stuff,
-# then enable this.
-INCLUDE_FULL_RPC = false
+config C_SYMBOL_PREFIX
+ string
+ default ""
-# If you want to include support for the next version of the Internet
-# Protocol: IP version 6, enable this. This is off by default.
-INCLUDE_IPV6 = false
+config ARCH_CFLAGS
+ string
+ default ""
-# If you want to include threads support, enable this. The C library will
-# be compiled thread-safe, and the libpthread library will be built.
-INCLUDE_THREADS = true
+config ARCH_LDFLAGS
+ string
+ default ""
-# If you want to support only Unix 98 PTYs enable this. Some older
-# applications may need this disabled. For most current programs,
-# you can generally leave this true.
-UNIX98PTY_ONLY = true
+config LIBGCC_CFLAGS
+ string
+ default ""
-# Enable this if /dev/pts is on a devpts or devfs file system. Both
-# these filesystems automatically manage permissions on the /dev/pts
-# devices. You may need to mount this fs on /dev/pts for this to work.
-# This is true by default.
-ASSUME_DEVPTS = true
-
-# If you want to compile the library as PIC code, turn this on.
-# This is automagically enabled when HAVE_SHARED is true
-DOPIC = false
-
-# Enable support for shared libraries? If this is false, you can
-# ignore all the rest of the options in this file...
-HAVE_SHARED = true
-
-# uClibc has a native shared library loader for some architectures.
-BUILD_UCLIBC_LDSO = true
-
-# If you are using shared libraries, but do not want/have a native
-# uClibc shared library loader, please specify the name of your
-# system's shared library loader here...
-#SYSTEM_LDSO = /lib/ld-linux.so.2
-
-# When using shared libraries, this path is the location where the
-# shared library will be invoked. This value will be compiled into
-# every binary compiled with uClibc.
-#
-# BIG FAT WARNING:
-# If you do not have a shared library loader with the correct name
-# sitting in the directory this points to, your binaries will not run.
-SHARED_LIB_LOADER_PATH = /lib
+source "extra/Configs/Config.in.arch"
-# DEVEL_PREFIX is the directory into which the uClibc development
-# environment will be installed. The result will look something
-# like the following:
-# DEVEL_PREFIX/
-# lib/ <contains all runtime and static libs>
-# include/ <Where all the header files go>
-# This value is used by the 'make install' Makefile target. Since this
-# directory is compiled into the uclibc cross compiler spoofer, you
-# have to recompile if you change this value...
-DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc
+endmenu
-# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing
-# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by
-# the 'make install' target, and is not compiled into anything. This
-# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will
-# want to set this to "/usr" instead.
-SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)
+source "extra/Configs/Config.in"
-# DEVEL_TOOL_PREFIX is the directory prefix used when installing
-# bin/gcc, bin/ld, etc. This is only used by the 'make install'
-# target, and is not compiled into anything. This defaults to
-# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to
-# set this to something else.
-DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr
-# If you want 'make install' to install everything under a temporary
-# directory, the define PREFIX during the install step,
-# i.e., 'make PREFIX=/var/tmp/uClibc install'.
-#PREFIX = $(TOPDIR)/_install
-# Library Configuration rules for uClibc
#
-# This file contains rules which are shared between multiple Makefiles. All
-# normal configuration options live in the file named "Config". You probably
-# should not mess with this file unless you know what you are doing...
-#
-# Copyright (C) 2000 by Lineo, inc.
-# Copyright (C) 2000,2001 Erik Andersen <andersee@debian.org>
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Library General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or (at your option) any
-# later version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Library General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-# other sundry sources. Files within this library are copyright by their
-# respective copyright holders.
-
-NATIVE_CC = gcc
-
-# If you are running a cross compiler, you may want to set this
-# to something more interesting... Target architecture is determined
-# by asking this compiler what arch it compiles stuff for.
-CROSS = #$(TARGET_ARCH)-linux-
-CC = $(CROSS)gcc
-AR = $(CROSS)ar
-LD = $(CROSS)ld
-NM = $(CROSS)nm
-STRIPTOOL = $(CROSS)strip
-#STRIPTOOL = /bin/true
-
-# Set the following to `true' to make a debuggable build, and `false' for
-# production builds.
-DODEBUG = false
-
-# Compiler warnings you want to see
-WARNINGS=-Wall
-# Note that the kernel source you use to compile with should be the same as the
-# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary
-# compatibility across kernel versions. So don't expect, for example, uClibc
-# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
-# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
-# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
-# work at all. You have been warned.
-KERNEL_SOURCE=/usr/src/linux
+mainmenu "uClibc C Library Configuration"
-# Set this to `false' if your CPU doesn't have a memory management unit (MMU).
-# Set it to `true' otherwise.
-HAS_MMU = true
+menu "Target Architecture Features and Options"
-# Set this to `false' if you don't have/need basic floating point support
-# support in libc (strtod, printf, scanf). Set it to `true' otherwise.
-# If this is not true, then libm will not be built.
-HAS_FLOATING_POINT = true
+config HAVE_ELF
+ bool
+ default y
-# Set to `true' if you want the math library to contain the full set
-# of C99 math library features. Costs an extra 35k or so on x86.
-DO_C99_MATH = false
-
-# Set this to 'false if you don't need shadow password support.
-HAS_SHADOW = false
-
-# Set this to `false' if you don't have/need locale support; `true' otherwise.
-# NOTE: Currently does not affect collation.
-# You must also generate the locale data and associated .h file.
-# See the README in directory extra/locale for details.
-HAS_LOCALE = false
-
-# Set this to `false' if you don't have/need wide char support.
-HAS_WCHAR = false
-
-# This specifies which malloc implementation is used.
-#
-# "malloc" use mmap for all allocations and so works very well on MMU-less
-# systems that do not support the brk() system call. It is pretty smart
-# about reusing already allocated memory, and minimizing memory wastage.
-#
-# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call
-# for all memory allocations. This makes it very fast. It is also pretty
-# smart about reusing already allocated memory, and minimizing memory wastage.
-# Because this uses brk() it will not work on uClinux MMU-less systems.
-#MALLOC = malloc
-MALLOC = malloc-930716
+config C_SYMBOL_PREFIX
+ string
+ default ""
-# If you want large file support (greater then 2 GiB) turn this on.
-# Do not enable this unless your kernel provides large file support.
-DOLFS = false
+config ARCH_CFLAGS
+ string
+ default ""
-# Posix regular expression code is really big -- 27k all by itself.
-# If you don't use regular expressions, turn this off and save space.
-# Of course, if you only staticly link, leave this on, since it will
-# only be included in your apps if you use regular expressions.
-INCLUDE_REGEX=true
+config ARCH_LDFLAGS
+ string
+ default ""
-# If you want to include RPC support, enable this. RPC is almost never used
-# for anything except NFS support, so unless you plan to use NFS, leave this
-# disabled. This is off by default.
-INCLUDE_RPC = false
-
-# Normally we enable just enough RPC support for things like rshd and
-# nfs mount to work. If you find you need the rest of the RPC stuff,
-# then enable this.
-INCLUDE_FULL_RPC = false
-
-# If you want to include support for the next version of the Internet
-# Protocol: IP version 6, enable this. This is off by default.
-INCLUDE_IPV6 = false
-
-# If you want to include threads support, enable this. The C library will
-# be compiled thread-safe, and the libpthread library will be built.
-INCLUDE_THREADS=false
-
-# If you want to support only Unix 98 PTYs enable this. Some older
-# applications may need this disabled. For most current programs,
-# you can generally leave this true.
-UNIX98PTY_ONLY = true
-
-# Enable this if /dev/pts is on a devpts or devfs file system. Both
-# these filesystems automatically manage permissions on the /dev/pts
-# devices. You may need to mount this fs on /dev/pts for this to work.
-# This is true by default.
-ASSUME_DEVPTS = true
-
-
-# If you want to compile the library as PIC code, turn this on.
-# This is automagically enabled when HAVE_SHARED is true
-DOPIC = false
-
-# Enable support for shared libraries? If this is false, you can
-# ignore all the rest of the options in this file...
-HAVE_SHARED = true
-
-# uClibc has a native shared library loader for some architectures.
-BUILD_UCLIBC_LDSO=true
-
-# If you are using shared libraries, but do not want/have a native
-# uClibc shared library loader, please specify the name of your
-# system's shared library loader here...
-#SYSTEM_LDSO=/lib/ld-linux.so.2
-SYSTEM_LDSO=$(shell for each in `$(CC) -print-search-dirs| \
- grep ^libraries| sed -e 's/^libraries: //' -e 's/:/ /g'`;\
- do ls $$each/ld.so.* 2>/dev/null;done)
-
-# When using shared libraries, this path is the location where the
-# shared library will be invoked. This value will be compiled into
-# every binary compiled with uClibc.
-#
-# BIG FAT WARNING:
-# If you do not have a shared library loader with the correct name
-# sitting in the directory this points to, your binaries will not run.
-SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib
+config LIBGCC_CFLAGS
+ string
+ default ""
-# DEVEL_PREFIX is the directory into which the uClibc development
-# environment will be installed. The result will look something
-# like the following:
-# DEVEL_PREFIX/
-# lib/ <contains all runtime and static libs>
-# include/ <Where all the header files go>
-# This value is used by the 'make install' Makefile target. Since this
-# directory is compiled into the uclibc cross compiler spoofer, you
-# have to recompile if you change this value...
-DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc
+source "extra/Configs/Config.in.arch"
-# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing
-# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by
-# the 'make install' target, and is not compiled into anything. This
-# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will
-# want to set this to "/usr" instead.
-SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)
+endmenu
-# DEVEL_TOOL_PREFIX is the directory prefix used when installing
-# bin/gcc, bin/ld, etc. This is only used by the 'make install'
-# target, and is not compiled into anything. This defaults to
-# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to
-# set this to something else.
-DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr
+source "extra/Configs/Config.in"
-# If you want 'make install' to install everything under a temporary
-# directory, the define PREFIX during the install step,
-# i.e., 'make PREFIX=/var/tmp/uClibc install'.
-#PREFIX = $(TOPDIR)/_install
-# Library Configuration rules for uClibc
#
-# This file contains rules which are shared between multiple Makefiles. All
-# normal configuration options live in the file named "Config". You probably
-# should not mess with this file unless you know what you are doing...
-#
-# Copyright (C) 2000 by Lineo, inc.
-# Copyright (C) 2001 by Hewlett-Packard Australia
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Library General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or (at your option) any
-# later version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Library General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-# other sundry sources. Files within this library are copyright by their
-# respective copyright holders.
-
-NATIVE_CC = gcc
-
-# If you are running a cross compiler, you may want to set this
-# to something more interesting... Target architecture is determined
-# by asking this compiler what arch it compiles stuff for.
-CROSS = /usr/cygnus/yapp-001013/H-i686-pc-linux-gnulibc2.1/bin/sh-linux-gnu-
-CC = $(CROSS)gcc
-AR = $(CROSS)ar
-LD = $(CROSS)ld
-NM = $(CROSS)nm
-STRIPTOOL = $(CROSS)strip
-#STRIPTOOL = /bin/true
-
-# Set the following to `true' to make a debuggable build, and `false' for
-# production builds.
-DODEBUG = false
-
-# Compiler warnings you want to see
-WARNINGS=-Wall
-
-# Note that the kernel source you use to compile with should be the same as the
-# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary
-# compatibility across kernel versions. So don't expect, for example, uClibc
-# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
-# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
-# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
-# work at all. You have been warned.
-KERNEL_SOURCE=../../../linux
-#
-# ARCH_CFLAGS if your have something special to add to the CFLAGS
-#
-ARCH_CFLAGS = -DNO_UNDERSCORES
-
-ifeq ($(strip $(TARGET_ARCH)),sh)
-ifeq ($(strip $(TARGET_PROC)),SH2_BIG_THAMIS)
-ARCH_CFLAGS += -DHIOS -mb -m2 -specs=/usr/cygnus/yapp-001013/H-i686-pc-linux-gnulibc2.1/lib/gcc-lib/sh-linux-gnu/2.96-yapp-001013/specs_sh2
-HAS_MMU = false
-endif
-ifeq ($(strip $(TARGET_PROC)),SH3_BIG_UCLINUX)
-ARCH_CFLAGS += -mb
-HAS_MMU = false
-endif
-ifeq ($(strip $(TARGET_PROC)),SH3_LITTLE_UCLINUX)
-ARCH_CFLAGS += -ml
-HAS_MMU = false
-endif
-ifeq ($(strip $(TARGET_PROC)),SH3_BIG)
-ARCH_CFLAGS += -mb -m3 -D__BIG_ENDIAN__
-HAS_MMU = true
-endif
-ifeq ($(strip $(TARGET_PROC)),SH3)
-ARCH_CFLAGS += -ml
-HAS_MMU = true
-endif
-ifeq ($(strip $(TARGET_PROC)),SH4)
-ARCH_CFLAGS += -ml -m4
-HAS_MMU = true
-endif
-endif
-
-# Set this to `false' if you don't have/need basic floating point support
-# support in libc (strtod, printf, scanf). Set it to `true' otherwise.
-# If this is not true, then libm will not be built.
-HAS_FLOATING_POINT = true
-
-# Set to `true' if you want the math library to contain the full set
-# of C99 math library features. Costs an extra 35k or so on x86.
-DO_C99_MATH = false
-
-# Set this to 'false if you don't need shadow password support.
-HAS_SHADOW = false
-
-# Set this to `false' if you don't have/need locale support; `true' otherwise.
-# NOTE: Currently does not affect collation.
-# You must also generate the locale data and associated .h file.
-# See the README in directory extra/locale for details.
-HAS_LOCALE = false
-
-# Set this to `false' if you don't have/need wide char support.
-HAS_WCHAR = false
-
-# This specifies which malloc implementation is used.
-#
-# "malloc" use mmap for all allocations and so works very well on MMU-less
-# systems that do not support the brk() system call. It is pretty smart
-# about reusing already allocated memory, and minimizing memory wastage.
-#
-# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call
-# for all memory allocations. This makes it very fast. It is also pretty
-# smart about reusing already allocated memory, and minimizing memory wastage.
-# Because this uses brk() it will not work on uClinux MMU-less systems.
-MALLOC = malloc
-#MALLOC = malloc-930716
-
-# If you want large file support (greater then 2 GiB) turn this on.
-# Do not enable this unless your kernel provides large file support.
-DOLFS = false
-
-# Posix regular expression code is really big -- 27k all by itself.
-# If you don't use regular expressions, turn this off and save space.
-# Of course, if you only staticly link, leave this on, since it will
-# only be included in your apps if you use regular expressions.
-INCLUDE_REGEX=true
-
-# If you want to include RPC support, enable this. RPC is almost never used
-# for anything except NFS support, so unless you plan to use NFS, leave this
-# disabled. This is off by default.
-INCLUDE_RPC = false
-
-# Normally we enable just enough RPC support for things like rshd and
-# nfs mount to work. If you find you need the rest of the RPC stuff,
-# then enable this.
-INCLUDE_FULL_RPC = false
-
-# If you want to include support for the next version of the Internet
-# Protocol: IP version 6, enable this. This is off by default.
-INCLUDE_IPV6 = false
-
-# If you want to include threads support, enable this. The C library will
-# be compiled thread-safe, and the libpthread library will be built.
-INCLUDE_THREADS = true
-
-# If you want to support only Unix 98 PTYs enable this. Some older
-# applications may need this disabled. For most current programs,
-# you can generally leave this true.
-UNIX98PTY_ONLY = true
-
-# Enable this if /dev/pts is on a devpts or devfs file system. Both
-# these filesystems automatically manage permissions on the /dev/pts
-# devices. You may need to mount this fs on /dev/pts for this to work.
-# This is true by default.
-ASSUME_DEVPTS = true
-
-
-# If you want to compile the library as PIC code, turn this on.
-# This is automagically enabled when HAVE_SHARED is true
-DOPIC = false
-
-# Enable support for shared libraries? If this is false, you can
-# ignore all the rest of the options in this file...
-HAVE_SHARED = true
-
-# uClibc has a native shared library loader for some architectures.
-BUILD_UCLIBC_LDSO= true
-
-# If you are using shared libraries, but do not want/have a native
-# uClibc shared library loader, please specify the name of your
-# system's shared library loader here...
-#SYSTEM_LDSO=/lib/ld-linux.so.2
-
-# When using shared libraries, this path is the location where the
-# shared library will be invoked. This value will be compiled into
-# every binary compiled with uClibc.
-#
-# BIG FAT WARNING:
-# If you do not have a shared library loader with the correct name
-# sitting in the directory this points to, your binaries will not run.
-SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib
-
-# DEVEL_PREFIX is the directory into which the uClibc development
-# environment will be installed. The result will look something
-# like the following:
-# DEVEL_PREFIX/
-# lib/ <contains all runtime and static libs>
-# include/ <Where all the header files go>
-# This value is used by the 'make install' Makefile target. Since this
-# directory is compiled into the uclibc cross compiler spoofer, you
-# have to recompile if you change this value...
-DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc
-
-# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing
-# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by
-# the 'make install' target, and is not compiled into anything. This
-# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will
-# want to set this to "/usr" instead.
-SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)
-
-# DEVEL_TOOL_PREFIX is the directory prefix used when installing
-# bin/gcc, bin/ld, etc. This is only used by the 'make install'
-# target, and is not compiled into anything. This defaults to
-# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to
-# set this to something else.
-DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr
-
-# If you want 'make install' to install everything under a temporary
-# directory, the define PREFIX during the install step,
-# i.e., 'make PREFIX=/var/tmp/uClibc install'.
-#PREFIX = $(TOPDIR)/_install
-
-#Enable .hidden asm directives
-HAVE_DOT_HIDDEN=true
+mainmenu "uClibc C Library Configuration"
+
+menu "Target Architecture Features and Options"
+
+config HAVE_ELF
+ bool
+ default y
+
+config C_SYMBOL_PREFIX
+ string
+ default ""
+
+config ARCH_CFLAGS
+ string
+ default ""
+
+config ARCH_LDFLAGS
+ string
+ default ""
+
+config LIBGCC_CFLAGS
+ string
+ default ""
+
+config HAVE_DOT_HIDDEN
+ bool
+ default y
+
+choice
+ prompt "Target Processor Type"
+ default CONFIG_GENERIC_ARM
+ help
+ This is the processor type of your CPU. This information is used for
+ optimizing purposes, as well as to determine if your CPU has an MMU,
+ an FPU, etc. If you pick the wrong CPU type, there is no guarantee
+ that uClibc will work at all....
+
+ Here are the available choices:
+ - "SH2" Hitachi SH2
+ - "SH3" Hitachi SH3
+ - "SH4" Hitachi SH4
+ - "SH5" Hitachi SH5
+
+config CONFIG_SH2
+ bool "SH2"
+
+config CONFIG_SH3
+ bool "SH3"
+
+config CONFIG_SH4
+ bool "SH4"
+
+config CONFIG_SH5
+ bool "SH5"
+
+endchoice
+
+choice
+ prompt "Target Processor Endianness"
+ default ARCH_LITTLE_ENDIAN
+ help
+ This is the endianness you wish to build use. Choose either Big
+ Endian, or Little Endian.
+
+config ARCH_LITTLE_ENDIAN
+ bool "Little Endian"
+
+config ARCH_BIG_ENDIAN
+ bool "Big Endian"
+
+endchoice
+
+
+config ARCH_HAS_NO_MMU
+ bool
+ default y if CONFIG_SH2 || CONFIG_SH3
+
+config CPU_CFLAGS
+ string
+ default "-DHIOS -ml -m2" if CONFIG_SH2 && ARCH_LITTLE_ENDIAN
+ default "-DHIOS -mb -m2" if CONFIG_SH2 && ARCH_BIG_ENDIAN
+ default "-DHIOS -ml -m3" if CONFIG_SH3 && ARCH_LITTLE_ENDIAN
+ default "-DHIOS -mb -m3" if CONFIG_SH3 && ARCH_BIG_ENDIAN
+ default "-DHIOS -ml -m4" if CONFIG_SH4 && ARCH_LITTLE_ENDIAN
+ default "-DHIOS -mb -m4" if CONFIG_SH4 && ARCH_BIG_ENDIAN
+ default "-DHIOS -ml -m5" if CONFIG_SH5 && ARCH_LITTLE_ENDIAN
+ default "-DHIOS -mb -m5" if CONFIG_SH5 && ARCH_BIG_ENDIAN
+
+source "extra/Configs/Config.in.arch"
+
+endmenu
+
+source "extra/Configs/Config.in"
+
+
-# Library Configuration rules for uClibc
#
-# This file contains rules which are shared between multiple Makefiles. All
-# normal configuration options live in the file named "Config". You probably
-# should not mess with this file unless you know what you are doing...
-#
-# Copyright (C) 2000 by Lineo, inc.
-# Copyright (C) 2000,2001 Erik Andersen <andersee@debian.org>
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Library General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or (at your option) any
-# later version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Library General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-# other sundry sources. Files within this library are copyright by their
-# respective copyright holders.
-
-NATIVE_CC = gcc
-
-# If you are running a cross compiler, you may want to set this
-# to something more interesting... Target architecture is determined
-# by asking this compiler what arch it compiles stuff for.
-CROSS = #$(TARGET_ARCH)-linux-
-CC = $(CROSS)gcc
-AR = $(CROSS)ar
-LD = $(CROSS)ld
-NM = $(CROSS)nm
-STRIPTOOL = $(CROSS)strip
-#STRIPTOOL = /bin/true
-
-# Set the following to `true' to make a debuggable build, and `false' for
-# production builds.
-DODEBUG = false
-
-# Compiler warnings you want to see
-WARNINGS=-Wall
-
-# Note that the kernel source you use to compile with should be the same as the
-# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary
-# compatibility across kernel versions. So don't expect, for example, uClibc
-# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
-# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
-# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
-# work at all. You have been warned.
-KERNEL_SOURCE=/usr/src/kernel-headers-2.2.19-sparc
-
-# Set this to `false' if your CPU doesn't have a memory management unit (MMU).
-# Set it to `true' otherwise.
-HAS_MMU = true
-
-# Set this to `false' if you don't have/need basic floating point support
-# support in libc (strtod, printf, scanf). Set it to `true' otherwise.
-# If this is not true, then libm will not be built.
-HAS_FLOATING_POINT = true
-
-# Set to `true' if you want the math library to contain the full set
-# of C99 math library features. Costs an extra 35k or so on x86.
-DO_C99_MATH = true
-
-# Set this to 'false if you don't need shadow password support.
-HAS_SHADOW = false
-
-# Set this to `false' if you don't have/need locale support; `true' otherwise.
-# NOTE: Currently does not affect collation.
-# You must also generate the locale data and associated .h file.
-# See the README in directory extra/locale for details.
-HAS_LOCALE = false
-# Set this to `false' if you don't have/need wide char support.
-HAS_WCHAR = false
+mainmenu "uClibc C Library Configuration"
-# This specifies which malloc implementation is used.
-#
-# "malloc" use mmap for all allocations and so works very well on MMU-less
-# systems that do not support the brk() system call. It is pretty smart
-# about reusing already allocated memory, and minimizing memory wastage.
-#
-# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call
-# for all memory allocations. This makes it very fast. It is also pretty
-# smart about reusing already allocated memory, and minimizing memory wastage.
-# Because this uses brk() it will not work on uClinux MMU-less systems.
-#MALLOC = malloc
-MALLOC = malloc-930716
-
-# Having brk allows one to use malloc-930716, which is an order
-# of magnitude faster then "malloc" for most allocations, but
-# will do very bad things on MMU-less systems...
-EXCLUDE_BRK=false
-
-# If you want large file support (greater then 2 GiB) turn this on.
-# Do not enable this unless your kernel provides large file support.
-DOLFS = false
-
-# Posix regular expression code is really big -- 27k all by itself.
-# If you don't use regular expressions, turn this off and save space.
-# Of course, if you only staticly link, leave this on, since it will
-# only be included in your apps if you use regular expressions.
-INCLUDE_REGEX=true
-
-# If you want to include RPC support, enable this. RPC is almost never used
-# for anything except NFS support, so unless you plan to use NFS, leave this
-# disabled. This is off by default.
-INCLUDE_RPC = false
-
-# Normally we enable just enough RPC support for things like rshd and
-# nfs mount to work. If you find you need the rest of the RPC stuff,
-# then enable this.
-INCLUDE_FULL_RPC = false
+menu "Target Architecture Features and Options"
-# If you want to include support for the next version of the Internet
-# Protocol: IP version 6, enable this. This is off by default.
-INCLUDE_IPV6 = false
+config HAVE_ELF
+ bool
+ default y
-# If you want to include threads support, enable this. The C library will
-# be compiled thread-safe, and the libpthread library will be built.
-INCLUDE_THREADS=false
+config C_SYMBOL_PREFIX
+ string
+ default ""
-# If you want to support only Unix 98 PTYs enable this. Some older
-# applications may need this disabled. For most current programs,
-# you can generally leave this true.
-UNIX98PTY_ONLY = true
+config ARCH_CFLAGS
+ string
+ default "-fpic -mlinux -D__USE_WEAK_ALIASES"
-# Enable this if /dev/pts is on a devpts or devfs file system. Both
-# these filesystems automatically manage permissions on the /dev/pts
-# devices. You may need to mount this fs on /dev/pts for this to work.
-# This is true by default.
-ASSUME_DEVPTS = true
+config ARCH_LDFLAGS
+ string
+ default "-mcrislinux"
+config LIBGCC_CFLAGS
+ string
+ default "-mlinux"
-# If you want to compile the library as PIC code, turn this on.
-# This is automagically enabled when HAVE_SHARED is true
-DOPIC = false
-
-# Enable support for shared libraries? If this is false, you can
-# ignore all the rest of the options in this file...
-HAVE_SHARED = false
-
-# uClibc has a native shared library loader for some architectures.
-BUILD_UCLIBC_LDSO=false
-
-# If you are using shared libraries, but do not want/have a native
-# uClibc shared library loader, please specify the name of your
-# system's shared library loader here...
-#SYSTEM_LDSO=/lib/ld-linux.so.2
-SYSTEM_LDSO=$(shell for each in `$(CC) -print-search-dirs| \
- grep ^libraries| sed -e 's/^libraries: //' -e 's/:/ /g'`;\
- do ls $$each/ld.so.* 2>/dev/null;done)
-
-# When using shared libraries, this path is the location where the
-# shared library will be invoked. This value will be compiled into
-# every binary compiled with uClibc.
-#
-# BIG FAT WARNING:
-# If you do not have a shared library loader with the correct name
-# sitting in the directory this points to, your binaries will not run.
-SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib
-
-# DEVEL_PREFIX is the directory into which the uClibc development
-# environment will be installed. The result will look something
-# like the following:
-# DEVEL_PREFIX/
-# lib/ <contains all runtime and static libs>
-# include/ <Where all the header files go>
-# This value is used by the 'make install' Makefile target. Since this
-# directory is compiled into the uclibc cross compiler spoofer, you
-# have to recompile if you change this value...
-DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc
+source "extra/Configs/Config.in.arch"
-# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing
-# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by
-# the 'make install' target, and is not compiled into anything. This
-# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will
-# want to set this to "/usr" instead.
-SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)
+endmenu
-# DEVEL_TOOL_PREFIX is the directory prefix used when installing
-# bin/gcc, bin/ld, etc. This is only used by the 'make install'
-# target, and is not compiled into anything. This defaults to
-# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to
-# set this to something else.
-DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr
+source "extra/Configs/Config.in"
-# If you want 'make install' to install everything under a temporary
-# directory, the define PREFIX during the install step,
-# i.e., 'make PREFIX=/var/tmp/uClibc install'.
-#PREFIX = $(TOPDIR)/_install
-# Library Configuration rules for uClibc
#
-# This file contains rules which are shared between multiple Makefiles. All
-# normal configuration options live in the file named "Config". You probably
-# should not mess with this file unless you know what you are doing...
-#
-# Copyright (C) 2000 by Lineo, inc.
-# Copyright (C) 2000,2001 Erik Andersen <andersee@debian.org>
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Library General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or (at your option) any
-# later version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Library General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-# other sundry sources. Files within this library are copyright by their
-# respective copyright holders.
-
-# The root directory used for installation, corresponding to $(prefix)
-# for GNU packages. This defaults to /usr/local, but makers of .rpms
-# and .debs will want to set this to "/usr" instead.
-INSTALL_ROOT = /usr/local
-
-NATIVE_CC = gcc
-
-# If you are running a cross compiler, you may want to set this
-# to something more interesting... Target architecture is determined
-# by asking this compiler what arch it compiles stuff for.
-CROSS = v850e-elf-
-CC = $(CROSS)gcc
-AR = $(CROSS)ar
-LD = $(CROSS)ld
-NM = $(CROSS)nm
-STRIPTOOL = $(CROSS)strip
-#STRIPTOOL = /bin/true
-
-# Set the following to `true' to make a debuggable build, and `false' for
-# production builds.
-DODEBUG = false
-
-# Compiler warnings you want to see
-WARNINGS=-Wall
-
-# Note that the kernel source you use to compile with should be the same as the
-# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary
-# compatibility across kernel versions. So don't expect, for example, uClibc
-# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
-# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
-# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
-# work at all. You have been warned.
-KERNEL_SOURCE=$(PROJ_UCLINUX)/uclinux/linux-2.4.6
-
-# Set this to `false' if your CPU doesn't have a memory management unit (MMU).
-# Set it to `true' otherwise.
-HAS_MMU = false
-
-# Set this to `false' if you don't have/need basic floating point support
-# support in libc (strtod, printf, scanf). Set it to `true' otherwise.
-# If this is not true, then libm will not be built.
-HAS_FLOATING_POINT = true
-# Set to `true' if you want the math library to contain the full set
-# of C99 math library features. Costs an extra 35k or so on x86.
-DO_C99_MATH = false
+mainmenu "uClibc C Library Configuration"
-# Set this to `false' if you don't have/need locale support; `true' otherwise.
-# NOTE: Currently does not affect collation.
-# You must also generate the locale data and associated .h file.
-# See the README in directory extra/locale for details.
-HAS_LOCALE = false
+menu "Target Architecture Features and Options"
-# Set this to `false' if you don't have/need wide char support.
-HAS_WCHAR = false
+config HAVE_ELF
+ bool
+ default y
-# This specifies which malloc implementation is used.
-#
-# "malloc" use mmap for all allocations and so works very well on MMU-less
-# systems that do not support the brk() system call. It is pretty smart
-# about reusing already allocated memory, and minimizing memory wastage.
-#
-# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call
-# for all memory allocations. This makes it very fast. It is also pretty
-# smart about reusing already allocated memory, and minimizing memory wastage.
-# Because this uses brk() it will not work on uClinux MMU-less systems.
-MALLOC = malloc
-#MALLOC = malloc-930716
-
-# If you want large file support (greater then 2 GiB) turn this on.
-# Do not enable this unless your kernel provides large file support.
-DOLFS = true
-
-# Posix regular expression code is really big -- 27k all by itself.
-# If you don't use regular expressions, turn this off and save space.
-# Of course, if you only staticly link, leave this on, since it will
-# only be included in your apps if you use regular expressions.
-INCLUDE_REGEX=true
-
-# If you want to include RPC support, enable this. RPC is almost never used
-# for anything except NFS support, so unless you plan to use NFS, leave this
-# disabled. This is off by default.
-INCLUDE_RPC = false
-
-# Normally we enable just enough RPC support for things like rshd and
-# nfs mount to work. If you find you need the rest of the RPC stuff,
-# then enable this.
-INCLUDE_FULL_RPC = false
+config C_SYMBOL_PREFIX
+ string
+ default "_"
-# If you want to include support for the next version of the Internet
-# Protocol: IP version 6, enable this. This is off by default.
-INCLUDE_IPV6 = false
+config ARCH_CFLAGS
+ string
+ default ""
-# If you want to support only Unix 98 PTYs enable this. Some older
-# applications may need this disabled. For most current programs,
-# you can generally leave this true.
-UNIX98PTY_ONLY = true
+config ARCH_LDFLAGS
+ string
+ default ""
-# Enable this if /dev/pts is on a devpts or devfs file system. Both
-# these filesystems automatically manage permissions on the /dev/pts
-# devices. You may need to mount this fs on /dev/pts for this to work.
-# This is true by default.
-ASSUME_DEVPTS = true
+config LIBGCC_CFLAGS
+ string
+ default ""
+config HAVE_ELF
+ bool
+ default y
-# If you want to compile the library as PIC code, turn this on.
-# This is automagically enabled when HAVE_SHARED is true
-DOPIC = false
+config ARCH_HAS_NO_MMU
+ bool
+ default y
-# String prefixed to all user symbol names by the C compiler. Usually
-# either empty or an underscore.
-C_SYMBOL_PREFIX = _
-
-# Enable support for shared libraries? If this is false, you can
-# ignore all the rest of the options in this file...
-HAVE_SHARED = false
-
-# uClibc has a native shared library loader for some architectures.
-BUILD_UCLIBC_LDSO=false
-
-# If you are using shared libraries, but do not want/have a native
-# uClibc shared library loader, please specify the name of your
-# system's shared library loader here...
-#SYSTEM_LDSO=/lib/ld-linux.so.2
-
-# When using shared libraries, this path is the location where the
-# shared library will be invoked. This value will be compiled into
-# every binary compiled with uClibc.
-#
-# BIG FAT WARNING:
-# If you do not have a shared library loader with the correct name
-# sitting in the directory this points to, your binaries will not run.
-SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib
+source "extra/Configs/Config.in.arch"
-# DEVEL_PREFIX is the directory into which the uClibc development
-# environment will be installed. The result will look something
-# like the following:
-# DEVEL_PREFIX/
-# lib/ <contains all runtime and static libs>
-# include/ <Where all the header files go>
-# This value is used by the 'make install' Makefile target. Since this
-# directory is compiled into the uclibc cross compiler spoofer, you
-# have to recompile if you change this value...
-DEVEL_PREFIX = $(INSTALL_ROOT)/$(TARGET_ARCH)-uclibc
+endmenu
-# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing
-# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by
-# the 'make install' target, and is not compiled into anything.
-SYSTEM_DEVEL_PREFIX = $(INSTALL_ROOT)
+source "extra/Configs/Config.in"
-# DEVEL_TOOL_PREFIX is the directory prefix used when installing
-# bin/gcc, bin/ld, etc. This is only used by the 'make install'
-# target, and is not compiled into anything.
-DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)
-# If you want 'make install' to install everything under a temporary
-# directory, the define PREFIX during the install step,
-# i.e., 'make PREFIX=/var/tmp/uClibc install'.
-#PREFIX = $(TOPDIR)/_install